Digital Commons Network^™

August 13, 2001 Reporter, University Of Alabama At Birmingham

eReporter (campus newsletter)

No abstract provided.

Monitor Newsletter August 13, 2001, Bowling Green State University

Monitor

Official Publication of Bowling Green State University for Faculty and Staff

The Nature Of [Ar Iii]-Bright Knots In The Crab Nebula, Emily L. Schaller, Robert A. Fesen

Dartmouth Scholarship

The kinematic and morphological properties of a string of [Ar III] bright knots in the CrabNebula are examined using 1994 – 1999 HST WFPC-2 images of the remnant. We find that five southern [Ar III] bright knots exhibit ordinary radial motions away from the nebula’s center of expansion with magnitudes consistent with their projected radial displacements. This result does not support the suggestion by MacAlpine et al. (1994) that these knots might be moving rapidly away from the Crab pulsar due to a collimated wind. The HST images also do not show that the [Ar III] knots have unusual morphologies …

Radiation Transport Modeling Of Beam-Target Experiments For The Aaa Project, William Culbreth

Reactor Campaign (TRP)

The AAA program will rely on the use of an accelerator-based transmuter to expose spent nuclear fuel to high-energy neutrons. The neutron flux will be sufficient to activate or fission the long-lived isotopes of Tc, I, Pu, Am, Cm, and Np that present a significant safety hazard in commercial spent fuel. Transmuter fuel will be subcritical and a high-energy proton accelerator is needed to maintain the necessary neutron flux through the use of a neutron spallation target. The maximum neutron energy produced by spallation (~ 600 MeV) is significantly higher than that produced by a commercial light water reactor (~ …

Design And Evaluation Of Processes For Fuel Fabrication, Georg F. Mauer

Fuels Campaign (TRP)

The objective of this project is the design and evaluation of manufacturing processes for transmuter fuel fabrication. A detailed design description for the manufacturing of each candidate fuel type would support the informed selection of fuel for a transmutation system. We will collect pertinent manufacturing and process-related information and create an information database that will document the design, operations, and cost implications of various fuel choices. Fabrication processes for different fuel types will likely differ in terms of equipment types, throughput, and cost.

Year 1 of the project will be devoted to the analysis and assessment of the multiple steps …

Nuclear Criticality Analyses Of Separations Processes For The Transmutation Fuel Cycle, William Culbreth, Pang Tao

Separations Campaign (TRP)

To mitigate the waste created by conventional fission reactors, spent nuclear fuel must be mechanically separated from its cladding. For the development of fuel processing technology to support the Advanced Accelerator Applications (AAA) Program, aqueous and pyrochemical processes will be used to further separate technetium and iodine, uranium and the higher actinides (see Figure 1 for an example of the process layout)1. The higher actinides, including plutonium, americium, curium, and neptunium will be separated from the waste to facilitate their fabrication into new fuel for placement in a transmuter. High-energy neutrons generated by spallation in the transmuter break down these …

August 11, 2001 (Pages 4383-4518), Pennsylvania Legislative Reference Bureau

Volume 31 (2001)

No abstract provided.

Commencement Convocation Program, Usf, August 11, 2001, University Of South Florida

USF Graduation and Convocation Programs

Outstanding Senior - Arian Oriente Marquez; Distinguished Citizen Award - Dr. Sändra Helen Wilson

Clemson Commencement Program, August 2001, Clemson University

Clemson Commencement Programs

No abstract provided.

Development Of A Mechanistic Understanding Of High-Temperature Deformation Of Alloy Ep-823 For Transmutation Applications, Ajit K. Roy, Brendan O'Toole

Transmutation Sciences Materials (TRP)

The purpose of this project is to evaluate the elevated temperature tensile properties of Alloy EP- 823, a leading target material for accelerator-driven waste transmutation applications. This alloy has been proven to be an excellent structural material to contain the lead-bismuth-eutectic (LBE) nuclear coolant needed for fast spectrum operations. However, very little data exist in the open literature on the tensile properties of this alloy. The selection of Alloy EP-823 as the test material in the proposed task is based on the recommendation of our collaborator at the Los Alamos National Laboratory (LANL). The test material will be thermally treated …

Development Of A Systems Engineering Model Of The Chemical Separations Process, Yitung Chen, Darrell Pepper, Randy Clarksean

Separations Campaign (TRP)

Two activities are proposed: the development of a Systems Engineering model and the refinement of the Argonne code AMUSE (Argonne Model for Universal Solvent Extraction). The detailed systems engineering model will be the start of an integrated approach to the analysis of the materials separations associated with the national AAA program. A second portion of the project will streamline and improve an integral part of the overall systems model, which is the software package AMUSE. AMUSE analyzes the UREX process and other related solvent extraction processes and defines many of the process streams that are integral to the systems engineering …

University Of Nebraska At Omaha, August Commencement 2001, University Of Nebraska At Omaha

Commencement Programs

No abstract provided.

Measurement Of The Inclusive Jet Cross Section In Pp̅ Collisions At √S =1.8 Tev, T. Affolder, Kenneth A. Bloom, Collider Detector At Fermilab Collaboration

Kenneth Bloom Publications

We present results from the measurement of the inclusive jet cross section for jet transverse energies from 40 to 465 GeV in the pseudorapidity range 0.1<|η|-1 of data collected by the CDF Collaboration at the Fermilab Tevatron collider. The data are consistent with previously published results. The data are also consistent with QCD predictions given the flexibility allowed from current knowledge of the proton parton distributions. We develop a new procedure for ranking the agreement of the parton distributions with data and find that the data are best described by QCD predictions using the parton distribution functions which have a large gluon contribution at high E_T (CTEQ4HJ).

Ascent And Decompression Of Viscous Vesicular Magma In A Volcanic Conduit, Helene Massol, Claude Jaupart, Darrell Pepper

Mechanical Engineering Faculty Research

During eruption, lava domes and flows may become unstable and generate dangerous explosions. Fossil lava-filled eruption conduits and ancient lava flows are often characterized by complex internal variations of gas content. These observations indicate a need for accurate predictions of the distribution of gas content and bubble pressure in an eruption conduit. Bubbly magma behaves as a compressible viscous liquid involving three different pressures: those of the gas and magma phases, and that of the exterior. To solve for these three different pressures, one must account for expansion in all directions and hence for both horizontal and vertical velocity components. …

Modeling Corrosion In Oxygen Controlled Lbe Systems With Coupling Of Chemical Kinetics And Hydrodynamics, Samir Moujaes, Yitung Chen

Transmutation Sciences Materials (TRP)

The proposed work will combine chemical kinetics and hydrodynamics in target and test-loop lead-bismuth eutectic (LBE) systems to model system corrosion effects. This approach will result in a predicative tool that can be validated with corrosion test data, used to systematically design tests and interpret the results, and provide guidance for optimization in LBE system designs. The task includes of two subtasks. The first subtask is to try to develop the necessary predictive tools to be able to predict the levels of oxygen and corrosion products close to the boundary layer through the use of Computational Fluid Dynamics (CFD) modeling. …

Commencement Exercises - August 2001, Prairie View A&M University

Commencement and Convocation Exercises

No abstract provided.

Analysis Of Pesticide Gas Cartridges, John J. Johnston, Carol A. Furcolow, Doreen G. Griffin, Randal S. Stahl, John D. Eisemann

United States Department of Agriculture Wildlife Services: Staff Publications

Charcoal and sodium nitrate, the active ingredients in pesticide gas cartridges, are quantified via carbon analysis and ion chromatography, respectively. Linearity was excellent (R² > 0.995) over a range consisting of 50-150% of the target concentration for both ingredients. The coefficient of variation for the replicate analyses of gas cartridges over multiple days was <4% for both analytes. Using the results from the analysis of two batches of gas cartridges, theoretical populations were modeled and used to determine practical sampling strategies to support a quality control program for a gas cartridge manufacturing operation. This modeling indicates that the analysis of three cartridges from each of five different lots would produce mean values for both active ingredients that are within 5% of the true mean >99% of the time.

Washington University Record, August 10, 2001

Washington University Record

No abstract provided.

[2001-08-09] Minutes Of A Regular Meeting Of The Board Of Visitors Of Virginia Commonwealth University August 9, 2001., Virginia Commonwealth University. Board Of Visitors

VCU Board of Visitors Minutes

Official minutes of the VCU Board of Visitors and its Executive Committee.

Statistics And Supermetallicity: The Metallicity Of Ngc 6791, B. J. Taylor

Faculty Publications

For the old galactic cluster NGC 6791, Peterson & Green (1998a) and Chaboyer et al. (1999) have found that [Fe/H] approximately + 0.4 dex. A second look at that conclusion is taken in this paper. Zero-point problems are reviewed for a high-dispersion analysis done by Peterson & Green, and it is found that accidental errors have not been determined rigorously for the results of that analysis. It is also noted that in a color-magnitude analysis performed by Chaboyer et al., the important metallicity range between 0.0 and + 0.3 dex is not explored and hence is not ruled out. Moreover, …

Experimental Diatom Dissolution And The Quantification Of Microfossil Preservation In Sediments, D. B. Ryves, S. Juggins, Sherilyn C. Fritz, R. W. Battarbee

Department of Earth and Atmospheric Sciences: Faculty Publications

Four laboratory experiments on fresh, modern diatoms collected from lakes in the Northern Great Plains of North America were carried out to assess the effects of dissolution on diatom abundance and composition. Marked differences in mean dissolution susceptibility exist between species, despite sometimes significant intra- specific variation between heterovalves. Twenty-four taxa were ranked according to susceptibility to dissolution using an exponential decay model of valve abundance. This dissolution ranking was used to derive two weighted indices of sample preservation. A third index (F) was based on a simple binary classification of valve morphology into dissolved and pristine categories, …

Empirical Modeling And Vision Based Control For Laser Aided Metal Deposition Process, Mallikharjuna R. Boddu, Srinivas Musti, Robert G. Landers, Sanjeev Agarwal, Frank W. Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This paper gives a brief description of the laser aided manufacturing process. Empirical models describing the process dynamics of the laser aided metal deposition process is developed based on some of the models found in the literature. These models provide the basis for process planning and real time control. An embedded vision system, a two color temperature sensor, and a laser displacement sensor are incorporated for real time monitoring and control of the deposition process. The temperature profile of the surface and geometric characteristics of the melt pool are studied to ensure consistent operation of the process.

Skeleton-Based Geometric Reasoning For Adaptive Slicing In A Five-Axis Laser Aided Manufacturing Process System, Kunnayut Eiamsa-Ard, Jun Zhang, Frank W. Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Multi-axis Laser Aided Manufacturing Process (LAMP) is an additive manufacturing process similar to laser cladding. This process can produce full functional parts [1]. Traditional Layered Manufacturing processes produce parts with limited surface quality; and also the build time is often long due to the deposition of sacrificial support structure. The multiple degrees of freedom endow the LAMP system a capability to build parts without support structure. An algorithm for adaptive slicing based on skeleton is presented in this paper. The skeleton is useful for many applications such as feature recognition, robot path planning, shape analysis, and etc [2]. The near …

Ekupdate, August 6, 2001, Eastern Kentucky University, Public Relations

EKU Update

No abstract provided.

August 6, 2001 Reporter, University Of Alabama At Birmingham

eReporter (campus newsletter)

No abstract provided.

Search For Heavy Particles Decaying Into Electron-Positron Pairs In Pp̅ Collisions, V. M. Abazov, Gregory R. Snow, D0 Collaboration

Gregory Snow Publications

We present results of searches for technirho (ρ_T), techniomega (ω_T), and Z ′ particles, using the decay channels ρ_T, ω_T, Z ′ → ℯ⁺ℯ^-. The search is based on 124.8 pb^-1 of data collected by the D0 detector at the Fermilab Tevatron during 1992–1996. In the absence of a signal, we set 95% C.L. upper limits on the cross sections for the processes pp̅ → ρ_T, ω_T, Z ′ → ℯ⁺ℯ^- as a function of the mass of the decaying …

World Dairy Product Trade: Analysis With A Mixed Complementarity Problem Formulation, Charles F. Nicholson, Phillip M. Bishop

Agribusiness

World trade in dairy products is being transformed by trade policy liberalization and technological change in dairy processing. The mixed complementarity problem formulation to modeling product-specific dairy trade can overcome a number of the limitations of existing optimization models, and can facilitate desirable extensions to previous analyses.

Deafdigest Gold: Vol. 6, No. 1 August 5, 2001, Barry Strassler

DeafDigest Gold 2001

No abstract provided.

151st Commencement, Summer

Commencement Programs

No abstract provided.

University Of Central Florida Commencement, August 4, 2001, University Of Central Florida

Commencement Programs

No abstract provided.