Digital Commons Network^™

The Steady State Heat And Temperature Distribution Of A Hot Sphere Within An Infinite Wedge, David W. Horwat

Theses

This thesis presents a mathematical model of the steady state heat and temperature distributions of a hot sphere located along the midplane of an infinitely long wedge of any arbitrary central angle. The heat and temperature distributions of this geometric configuration are of immense value, since through the use of this model as a wedge shaped unit cell the description of any number of hot spheres, arranged in a regular planar array can be immediately determined.

The method of reflections is used to solve Laplace's equation , V²T=O , analytically using the sphere and the wedge walls as …

The Effect Of Dry-Blending High Density Polyethylene On Final Product Properties, Charles H. Klestadt

Theses

The incentives for Dry-Blending Polyethylenes of varying property type may be economic gain, improved product quality, or both. The manufacturers' latest mode of operation involves seeking to meet their customers' needs with a product line made by using one catalyst system and operating at maximum capacity, while varying the fewest possible control parameters. Off-spec materials and on-spec materials not fitting customers' requirements are two prime targets for additional profits with proper dry blending techniques. The approach used in solving the problem involved starting with an existing product line and converting these products into a number of experimental blends. The blends …

The Determination Of An Optimum Plant Capacity In A Dynamic Economy, Frederick Louis Monesmith

Theses

A. Monte Carlo computer program has been developed in which the optimum plant capacity is determined by comparing calculated profitability criterions for various plant capacities. The estimates for input variables are developed into probability distributions. This data is then used to calculate a probability distribution for a-profitability criterion. In this thesis approximately thirty input variables are developed into beta distributions. Each variable must be estimated with a ninety percent probability estimate, a most likely probability estimate and a ten percent probability estimate. The three level estimates for each variable completely describe the beta distribution. Approximately half of the beta distributions …

The Thermal Degradation Of Polyvinyl Alcohol, Carlos Eduardo Ortiz

Theses

The thermal degradation of polyvinyl alcohol has been investigated using mass spectrometry, differential thermal analysis, and infrared spectroscopy unlike previous investigators, formaldehyde and acrolein were not observed volatiles. In addition, acetic acid was observed, a product not reported previously.

Industrialized-Subsidized Housing In The Hackensack Meadowlands, Andrew Carl Gildersleeve

Theses

New Jersey as well as the rest of the nation is beginning to feel the pinch of what has been termed the housing crisis. The products of the World War II baby-boom are now reaching the age where they require homes of their own, making the demand for good quality low-cost housing very high. At the same time, the demand for good public housing continues to grow and we are learning that our previous efforts in this field have been far from satisfactory.

In the course of this study I have looked into the possibilities of solving a portion of …

Constructed Objects, Dennis Mcshane

Theses

Not Included

The Public Communications Service: An Urbanarium Program To Assist Community Groups With Improved Communications, Barbara Brecher

Theses

None provided.

Study Of Rochester Residents Current Attitudes And Knowledge Of New York City Banks Located In Rochester, New York, Dennis Easter

Theses

None provided.

An Attempt To Define Common Characteristics Among Certain Service Industries, William O'Connor

Theses

None provided.

A Study Of The Effect Of Ink Tack, Printing Pressure, And Printing Speed On Toning In The Driographic System, Thomas Rigg

Theses

An investigation was made into one of the newer planographic printing plates, specifically 3M's Dry Plate. This plate is part of the system more popularly known as driography. As with many new processes, driography is beset with several problems. These include plate durability, substrate suitability, and toning. This study deals with the problem of toning and a. method for investigating it. In driography, toning is defined as the inking of the non-image background of the plate. Several factors are thought to have an effect on the amount of toning. Factors such as ink tack, ink temperature, room temperature, humidity, speed, …

Suggested Guidelines For A Printing Program In Secondary Education, Raymond Torella

Theses

None provided.

A Study Of Industry-Prepared Instructional Aids And Services And Their Use By Graphic Arts Educators, Jere Rentzel

Theses

The primary purpose of this study was to determine which instructional aids and services graphic arts teachers felt were needed to improve their programs and themselves, and to compare those desired aids and services to the ones currently being provided by A.B. Dick, Addressograph-Multigraph, DuPont, Eastman Kodak, and the 3M Company. The secondary purpose was to develop a publishable list of instructional aids and services for graphic arts teachers. The graphic arts teachers' needs were solicited through a survey form completed by Rochester, New York, area teachers and by those graphic arts teachers who attended a special interest session, "New …

Self, Peter Knickerbocker

Theses

None provided.

Enhancement Of Color Images By Modulation Of The Luminous Component, David Feldman

Theses

None provided.

Design And Construction Of Sinusoidal Targets For Resolving Power Cameras, Peter Hertzmann

Theses

None provided.

A Photographic Recorder For Experimental Parachute Test Data, Peter Vredenburg

Theses

Improvement in the ability to record and retrieve experimental data in general enhances the degree of utilization of information. Recent advances in electronic logic circuits, and the advent of the light emitting diode, make possible the utilization of photography as an initial recording medium. This improves the retrieval time for data, since it can be reduced and coded prior to recording with modern solid state circuits. A feasibility study, and construction of a prototype recorder was done for application to experimental parachute test data. The recorder monitors strain gage response at a sample rate of 20 per second, converts the …

Soft Celadon Slabs, Joan Johnson

Theses

None provided.

Resolution Targets As A Measure Of Detail In Reproduction Of Engineering Drawings, Thomas Pratuch

Theses

The purpose of the experimentation was to abstract the problem of reading an engineering drawing so untrained observers could be used, and in so doing, find the minimum detail of drafted materials. Once the minimum detail condition was established, testing was to continue to find the procedures necessary to test for correlation between resolution targets and the minimum detail. The final goal was to reach a set of recommendations for further work and reduce the amount of unnecessary work for later experimenters. In short this paper was to help bring the testing of resolution and drafted materials to the same …

Figurative Tapestry, Lynne Bull

Theses

None provided.

Handicapped Independence, Dale Landon

Theses

None provided.

Design For A Developing Consortium, Henry A. Mauermeyer

Theses

The number of consortia in American higher education expanded rapidly from only ten in 1960 to eighty in 1973. Many do not have an organized method of developing interinstitutional cooperation, structuring their internal management, or preparing to meet future expansion.

The design of an organizational process appropriate to consortia in general has been developed in this thesis. The design is based on an analysis of various materials: (1) literature on the consortium movement; (2) data gathered from a nationwide survey conducted by the author; (3) visits with directors of consortia and experts in the consortium field; (4) actual working experience …

The Design And Implementation Of A Time-Shared Computer Based Construction Cost Estimating System For An Electric Utility, Thomas Arnold Westphal

Theses

The work of the distribution department of an elec tric utility involves a great deal of medium to heavy construction. This work is vital to serve the energy needs of the public. An electric utility constantly builds, reinforces, and repairs electric distribution facilities. The material and labor used to accomplish this construction is expensive. Money in sufficient amounts is seldom, if ever, available to finance all proposed construction projects. Therefore, the cost of proposed projects must be estimated in advance, so that management may decide on an economic basis which projects will be authorized.

The need for accurate construction cost …

Design Of Multipass Fractionating Trays, Paul W. Becker

Theses

Multipass fractionating trays are vapor-liquid contacting devices with high liquid handling capabilities which can be economically used in large fractionating towers. However, process design engineers in the chemical and petroleum industries seem to have an aversion to specifying multipass trays for their tower designs. This thesis presents the case for using multipass trays as well as methods for their design.

Because multipass trays are not symmetrical, as one and two pass trays are, the liquid and vapor need not split equally between the three or four passes. Equations are developed which enable the vapor and liquid flowrate for each pass …

Solvent Recovery From A Complex Process Solvent Stream, John Budavari

Theses

This work deals with the recovery of solvents from a complex process waste stream containing methylene chloride chloroform, n-propyl alcohol, isopropyl alcohol, heptane and butyl acetate. In addition to the above-mentioned solvents, the mixture is saturated with water (ca. 1%), hydrochloric acid, and contains organic and inorganic process impurities. The objective was to develop the simplest economical recovery process utilizing vapor-liquid equilibrium data, distillation and extraction procedures. Considerable effort was expended to develop precise and reliable assay methods. A process which met the necessary requirements of maximum solvent recovery with minimum waste disposal, was developed.

Reactions Of Perchloro-1,2-Dimethylene Cyclobutane With Amines, Robert James Smith

Theses

Perchloro-1,2-dimethylene cyclobutane was reacted with primary amines forming cyclic amidinium salts. Their structures were elucidated by the performance of various spectral analyses.

An Experimental Study Of The Separation Of Multicomponent Mixtures Via Thermal Parametric Pumping, Wayne Weywen Lin

Theses

A thermal continuous parametric pump for separating multi-component mixtures was experimentally investigated using the model system toluene-aniline-n-heptane on silica gel adsorbent. A simple method for predicting separations is presented and is found to be in good agreement with the experimental results. The method, based on an equilibrium theory, is under the assumption that a multicomponent mixture contains a series of pseudo-binary systems, each system consisting of one of the solutes as one component and the common inert solvent as the other component.

Absorption Of Methoxyflurane By Conductive Rubber And Polyethylene Anesthetic Hose, Edward A. Kippel

Theses

This thesis presents the results of an investigation into the absorption of methoxyflurane by conductive rubber and polyethylene anesthetic hose. Previous studies are reviewed and theoretical considerations governing the diffusion process are discussed.

Diffusion coefficients are calculated for commercially available hose materials using different anesthetic concentrations and oxygen flow rates.

Data obtained is compared with the results of previous investigations (primarily concerned with sorption into rubber hose) and similar results are presented for polyethylene hose.

Graphical data is used to demonstrate the effect of hose material on inspired anesthetic concentration.

The advantage of disposable conductive polyethylene hose over reusable rubber …

Densities Of Polar And Non-Polar Compounds And Their Mixtures, Peter Norman Notwick

Theses

Two principal studies were conducted as part of this thesis: evaluation of existing correlations for predicting densities of polar and non-polar liquids and their mixtures and experimentally measuring the densities of certain liquid systems.

Utilizing a modification of the simple picnometer experimental method, data were obtained for both pure compounds and liquid mixtures. Comparison of the pure compound data with available literature sources established the reliability of the technique.

The results of the correlation comparison indicate that the Riedel equation, is the most generally reliable for predicting the densities of pure "normal" compounds. Lydersen, et al., prepared tables for the …

Steady State And Dynamic Performance Of Anisotropic Reluctance Motor, S. Chandrasekhara Rao

Theses

The paper deals with a special type of reluctance motor called Anisotropic rotor reluctance motor. As the name implies, advantage is taken of the internal anisotropy of the rotor magnetic structure. Axially laminated grain oriented silicon steel is used in the rotor. This unconventional configuration of assembly of rotor laminations results in a high ratio of direct axis to quadrature axis reluctance. Compared to the conventional reluctance motor, pull out torque of more than three times and a power factor as high as in an induction motor is obtained. Several motors of ratings up to 60 HP. were built and …

An Evaluation Of The Applicability Of A.N.S.I. Standard Ph-2.9 To Contemporary Medical X-Ray Films Designated For Automated Processing, David Binko

Theses

Three medium speed screen-type medical x-ray films were exposed and manually processed in accordance with the procedures outlined in A.N.S.I. Standard PH-2.9, "Sensitometry of Medical X-Ray Films". Subsequent to processing, all samples were evaluated upon the response variables of base plus fog density, maximum density, A.N.S.I. speed, and A.N.S.I. contrast. A second set of film samples, exposed identically to the manually processed samples, were processed in a ninety-second cycle automated system. After sensitometric evaluation of the automated samples, a statistical comparison of the results obtained by both processing procedures was executed. In the second phase of the investigation, a factorial …