Digital Commons Network^™

Accuracy And Convergence Of Finite Element Approximations, Gwo-Tar Chang

Theses

In the design of structure, the engineer seeks to determine the distribution of stresses throughout the structure or the displacements at certain points of the structure. The finite element method is a numerical analysis technique for obtaining approximate solutions to engineering problems that are not amenable to closed form solutions.

In this work the triangular element and the rectangular element in plane stress are employed in the development of the formulation of element stiffness equations. The effect of the number of elements on the convergence to the analytical solution was investigated. Similar study using rectangular elements was also carried out …

Preparation Of Aniline-Formaldehyde Ion-Exchanger Fiber : Part I : Polymer Synthesis And Fiber Curing, Ching-Hsin Chen

Theses

Aniline-Formaldehyde polymer was synthesized by a new procedure ( as opposed to the conventional approach ). With an equal molar ratio of aniline and formaldehyde and a small amount of oxalic acid, the resulted polymer is free from gels and is suitable for fiber transformation.

The polymer is a transparent yellowish resin, having a melting range between 100-115C, and an average molecular weight 1200. The polymer was intended to be the precursor material for ion-exchange fibers. However, due to the time limit, this thesis only covers the work of polymer synthesis, fiber spinning and the identification of an crosslinker.

Among …

Industrial Parameters For Applying New Technology, Michael Cimino

Theses

Industrial Parameters for Applying New Technology is a paper devoted to the study of the role 'of' robots in today's manufacturing environment. Industry looks forward to robotic technology to solve, its declining productivity dilemma. The purpose of this paper is to' aid a Prospective robot buyer in selecting the appropriate application and in particular a suitable robot for that application. A listing of robot performance characteristics, criteria chart, and evaluation table were developed to guide the engineer through the necessary steps required in selecting a successful robot application.

The history of robotics is discussed briefly along with an explanation of …

Design Criteria For Employee Alcholism Programs, Lee G. Conover

Theses

This thesis is an examination and evaluation of treating employee alcohol-related problems through a counseling program. Special attention has been given to the many aspects that must be considered for the implementation of a successful counseling program.

To gather the data for this thesis, a successful counseling program was observed and members of its counseling program staff, medical, labor relations, and personnel departments, along with its union representatives, were interviewed in order to draw on their experience and expertise in organizing, implementing and maintaining such a counseling program. A counseling program consultant, a representative of the New Jersey Department of …

Selection And Problems Faced By The Handicapped In An Industry, Hemank Babulal Dharia

Theses

This thesis reports on the problems faced by handicapped workers placed in an industrial situation. It discusses some of the frustrations, aspirations and hopes of the disabled to find suitable work as well as the fears and misconceptions of employers who consider the employment of the handicapped.

There is discussed the work done by the author in designing jigs and fixtures to assist handicapped workers in production as well as the models of placement, job understanding and rehabilitation efforts.

The work was done at the Delaware County Branch of the Pennsylvania Association for the Blind, Chester, Pennsylvania where the author …

Computer Simulation Of The Respiratory System, Bruce Diner

Theses

The respiratory system was simulated utilizing a series of three models, each more complex than the previous. The first model simulated the respiratory system as a two compartment model driven by carbon dioxide concentration. The second model, also a two compartment model, simulated periodic breathing while the third model is a three compartment model and simulates acid-base balance disturbances.

In this study, the effects of hyperthyroidism and respiratory center depression on respiration premeasured utilizing the models to obtain data and then compare the results to known physiologic data.

Proposed Product Plan For A High Growth, High Technology Organization, Alan R. Eschbach

Theses

Analyzing and consequently redefining a corporation's product line or mix is an important task facing all manufacturing organizations. While this task is usually addressed in detail as part of an organization's business plan, it can be very disconcerting when an organization realizes that the markets and products that got them to where they are now will not necessarily be the ones that will give them the growth that they would like to realize. Redefining the product line can be even more critical to young, high technology organizations who have never done it before and have found themselves facing the possibility …

Managing And Controlling The Manufacturing Operations, Harish Doshi

Theses

No abstract provided.

Management Of The Interface Between Product Design And Production, Adam Fischer

Theses

The goal of this thesis was to identify some of the many obstacles which tend to, in some way or manner, delay the timely, satisfactory progression of new developments from becoming new profit items. These obstacles which are numerous are the results of personal observation plus research of many books and periodicals. The identification of the obstacles will hopefully result in their obviation. Notable accomplishments along these lines tend to:

1. Reduce the loss of opportunity to gain an appreciable market share.

2. Reduce investment/overhead cost by earlier recovery of cost through earlier marketing effort.

3. Reduce continuing engineering costs …

A Study Of Personal Conflict And Stress Among Engineering Personnel As Influenced By Corporate Policy, Stated And Unstated, Richard Brian Gordon

Theses

The following concepts are being challenged: That organizations are efficient, well-managed, and intelligent: that if one is to believe in any sort of authority, one must first accept the notion that it truly knows best and that it is not only competent, but well-intentioned; that organizations exist for the benefit of their employees and customers; that organizations reward dedication, competence, and performance: that if the organization is to grow it needs loyal sacrificing people; that organizations are dynamic and receptive to change; that if the employee is discouraged, do not worry, for tomorrow will be better; that to be useful …

Prediction Of Enthalpies Of Mixing With A Generalized Unifac Model, Steven Otto Hetzel

Theses

The UNIFAC model of Skjold-Jorgensen et al (1980), which incorporates a general temperature dependence for the coordination number is used in the correlation and prediction of heats of mixing for binary liquid mixtures. Correlation and prediction of n-alkanes and cyclic-alkanes with alkenes, ketones, aldehydes, esters, ethers, acids, nitriles, nitroalkanes, and aikynes have been performed in a temperature range of 0 to 100°C. Typical prediction and correlation errors of 5 to 20% are obtained using this model.

Shear Behavior Of Fibrous Reinforced Concrete Short Columns, Feraidoon K. Kashani

Theses

The objective of this investigation was to examine the shear behavior of axially loaded fibrous reinforced concrete short columns under double curvature bending. Eleven columns with modeled dimensions of 6 in. by 41/2 in. with only different fiber volume fraction V_f and shear span ratios were tested under double curvature bending.

The material properties of fibrous concrete is briefly discussed on how the addition of fibers benefits the concrete mix. The results of the compressive and tensile behavior of fibrous concrete is presented. The behavior of bending on reinforced fibrous concrete columns is also briefly discussed.

Previous investigation results, …

An Analysis For The Blade Coating Of Ctbn Modified Epoxy Adhesive, Jeng-Li Liang

Theses

A resin metering criterion has been developed for processing the prepregs of CTBN-EPOXY resin in which the resin content can be controlled within close tolerances. This criterion was obtained by numerically simulating the flow of CTBN-EPDXY resin in the blade-type metering device at room temperature. The Newtonion case of CTBN-EPOXY resin was selected for the study to avoid dealing with more complicated flow equations. A methodology of using the penalty function/finite element formulation was developed to solve the steady state Navior-Stokes equation.

The rheological data show that the CTBN-EPOXY resin is a non-Newtonion fluid at low shear rate. On the …

A Parameter Identification System For The Human Visual Evoked Response, Robert Kalle Michaels

Theses

The Human Visual Evoked Response (VER) provides a useful tool for analyzing an individual's visual system. However, mere inspection of the signal may not always be the best way to make a diagnosis of the patient. To aid in this diagnosis a parameter identification system has been developed which fits the response to an analog model. The development of the model was based on the results of a survey of previous work in the field. Data were acquired from a data acquisition/processing system developed at the New Jersey University of Medicine and Dentistry and the Eye Institute of New Jersey. …

Designing A Data Management System To Support A Quality Control Mission, Erastus Runji Muchioki

Theses

This thesis is concerned with the design of a Data Management System to support a Quality Control Mission particularly within the writer's organization. It defines the term quality, with respect to his company's needs, followed by an outline of quality control management's responsibilities. Problems of quality Control from product design, assembly to the finished product are discussed. The organization's current quality control procedures are analyzed. Problems in establishing the data base are discussed. This data is then organized to form the new Data Management System that will support a Quality Control Mission properly. In the discussion, the author tries to …

Managing In The Technical Sales Arena, Robert Munro

Theses

The major objective of this thesis is to portray the role of a Field Engineer for a major manufacturer of electrical distribution and control equipment. In so doing, it should represent a reasonable facsimile of what a sales manager of a large Field Office, comprised of approximately twelve Field Engineers, would encounter in his supervisory capacity. As such, it should provide information for those interested in entering and hoping to manage in technical sales career.

While much of the information was derived from books, periodicals, and conversations with people associated with the electrical industry, the major portion of the work …

Automated Instrumentation System For Studies Of Metabolic Rates In Rats, Suhas P. Pathak

Theses

The task of the instrumentation system is to measure the respiratory exchange in rats in a controlled experiment. Air is drawn at a predeter-mined rate in and out of rat chambers. The proportion of oxygen and carbon dioxide in the ensuing air indicates the respiratory rate of the rat. The entire operation is controlled by a microcomputer whose most important functions are: to direct the flow of air through the rat chambers by switching valves; and to collect data about the percentages of gases in question.

Thus with the help of a computer it is possible to monitor and control …

Criteria Measurement In Edp Auditing, Eugene Alexander Ottaviano

Theses

Criteria Measurement in EDP Auditing is a planning technique to assist the Internal Audit function in systematically selecting software applications for budgeted audit reviews. The objective is to develop a risk analysis method, which is not time and labor intensive, that will minimize risk to the corporation and maximize audit effectiveness. The methodology does not consider probabilities or occurrence rates because risks to the EDP environment are extremely difficult to forecast with traditional techniques. The method provides for both objective and subjective risk determinations.

The approach is to measure software risk criteria for a specific data processing environment. Risk concerns …

The Hydroxide-, Chymotrypsin-, And Blood-Catalyzed Hydrolysis Of A Series Of Sodium 4-Acyloxy-3-Nitrobenzene Sulfonates, Louis E. Rinaldi

Theses

The kinetics of the hydrolysis of a series of water-soluble aromatic esters (sodium 4-acyloxy-3-nitrobenzene sulfonates) were analyzed in order to determine the effect of a variety of substitutions (on the α-carbon of the acid group) upon the rate of reaction.

The following was observed. That (a), the hydroxide catalyzed and water dependent hydrolyses of these esters are slower for larger substituents and faster for smaller ones. That (b), the chymotrypsin catalytic hydrolysis of these esters shows an acylation reaction step which occurs at a rate greater than deacylation for larger substituents, and at approximately equal rates for smaller ones. Furthermore, …

Gallium Nitride Film Deposition By Ionized Cluster Beam Epitaxy, Ghulum Bakiri

Theses

An experimental Ionized Cluster Beam System similar in design to the one developed at Kyoto University in Japan was. designed and constructed in the Microelectronics Laboratory at NJIT. This involved making the working drawings, having the parts machined and then assembling the system in a vacuum system together with the necessary variable power supplies, meters, controls, gas inlets, cooling water connections, etc.

Eleven deposition runs were then attempted to grow gallium nitride utilizing the system constructed. In a typical deposition run, gallium was vaporized from a boron nitride crucible at 1000° C and allowed to expand through a 0.5 mm …

An Improvement In The Chemical Engineering Simulation System, Roman Andreyuk

Theses

The accurate design of chemical processing plants is important to the chemical engineer. The original version of CHESS (Chemical Engineering Simulation System) greatly reduced the amount of time which previously had to be spent on the design of such plants by providing the engineer with a package which simulated some of the more common pieces of chemical processing equipment found in a typical chemical plant.

The present version of the Chemical Engineering Simulation System (CHESS2) presents a significant improvement over the original version. The improvement was achieved by expanding the thermodynamic package, offering the user a choice of methods by …

A Finite Difference Solution Of An Ideal, Normal, Impinging Jet, Luis A. Gast

Theses

The free boundary of a circular jet of an irrotational, inviscid, incompressible, fluid impinging normally to a flat surface from a height of 2 times the nozzle radius, was found by a finite difference method.

Starting with a graphical solution, approximate values of the potential were given to the nodes at the field.

Having the equipotential lines perpendicular to the axis of the jet, perpendicular to the impinging surface, and having defined the value of the potential at both the entrance and exit of the jet, a finite difference expression of the Laplace's equation was used in an iteration scheme …

An Application Of Personal Microcomputer To Solve Mid-Sized Goal Programming Problems, Chanhon Joe Lu

Theses

This thesis develops a microcomputer software to solve mid-sized goal programming problems utilizing the revised simplex method.

Goal programming is an extension of linear programming, but is more powerful and flexible than linear programming because of its capability in handling problems with multiple conflicting objectives, instead of dealing with "one dimensional" objective - profit maximization or cost minimization. Accordingly, goal programming is very useful to the complex organizational environments.

With the help of rapid and accurate computation of digital computers, solving a complex program is not a difficult task at all. However, some medium-sized companies cannot afford a mainframe -computer, …

Behavior Of Composite Steel-Fibrous Concrete Beams, Avijit Mookerjee

Theses

This research thesis on composite steel-fibrous concrete is based on a series of beam tests conducted in the Structural and Concrete Laboratory of the New Jersey Institute of Technology.

In the first series of tests, two twenty-foot two-span continuous beams were tested. In the first beam, plain reinforced concrete was used in the construction of the composite beam. The second beam had 1.5% by volume of steel fibers in the concrete.

In the second series, four composite T-beams were tested. Two of the beams had 1% of steel fibers by volume. The other two beams were constructed using plain concrete. …

Organizing To Manage Future Information Technologies, John Patrick Paczkowski

Theses

The area of information technology has undergone dramatic changes over the past ten years, and the rate of change is expected to continue to accelerate through the 1980's and beyond. The newly developing information systems are providing organizations with numerous options for enhancing the quality of managerial decision making, speeding communications and improving the efficiency and effectiveness of administrative/office processes. Unfortnately, many organizations are discovering that they are unable to effectively assimilate and utilize the technology effectively. Chief executives are finding that the traditional structures for managing Data Processing, Telecommunications, and office systems are often fragmented, lack the technical expertise …

Nomographs And Tables For Simplified Thermal Analysis Of Power Piping, Dhanjibhai N. Patel

Theses

This Thesis develops Nomographs and Tables for simplified thermal analysis of " Power Piping." It gives the length of required Thermal Relieve Leg when a set of piping parameters such as, pipe size, pipe material, operating temperature and pipe length are given.

The Nomographs and Tables developed here can be used

1. to determine the primary piping layout, piping route, support location etc. before vigorous conputer analysis is performed.

2. to help the Field Engineer on the plant site to make " on the spot " decisions on pending piping route changes.

Two Nomographs are developed in this Thesis. One …

Failure Surface For L-Shaped Reinforced Concrete Short Columns, Mon-Chen Liu

Theses

Combined bending and axial compression for L-shaped reinforced concrete short columns is a common problem. But the present ACI Building Code (ACI 318-77), handbooks and texbooks pay no attention to this problem. A numerical analysis and computer program developed by Hsu fora reinforced concrete member subject to biaxial bending and axial load has been used Using this computer program, the interaction diagrams and failure surface were developed for L-shaped members under combined bending and axial compression. A comparison between theoretical and experimental results was included to examine the validity of failure surface.

Variations, An Analysis, Janet Lauroesch

Theses

None provided.

The Right Mood, Mary Pat O'Brien

Theses

Through this supportive documentation of my thesis work, I hope to verbally clarify the intentions mentioned in my proposal. Due to the subjective nature of abstract paintings, it is nearly impossible to conclusively prove a point. By referring to observations made by and about other artists and their work, I have been able to substantiate and complement my own ideas. I found evidence of what I interpreted to be the underlying attitude that is developed individually but shared collectively by artists. It seems this "shared attitude" has no geographic or time boundaries. It is remarkable to note parallels between the …

The Complexity Of Simplicity, Jette Whitely

Theses

None provided.