Digital Commons Network^™

A Machine Vision System With Remote Host, Chieyeon Jason Chen

Theses

The modem plays an important role in data communication using the Public Swiched Telephone Network. In this thesis, the modem function is merged into a low cost machine vision system based on the Motorola 68HC11. Evalation Board The system comprises the intelligent machine vision con- troller and a remotely located host computer, such as an IBM-PC. It, supports extra long distance communication capability so that the controller and the host can be anywhere in the world where then is a telephone line. Because of the limit of a 2100 bps modem, soft ware data compression is implemented here to save …

Artificial Dielectric Polymeric Optical Waveguides, Peng Chen

Theses

Wave propagation in artificial dielectric polymeric optical thin film waveguides is studied. These artificial dielectric films are made of multiple layers either metallic or semiconductor clusters in polymeric matrix. The waveguides are fabricated using the plasma polymerization and vacuumm evaporation deposition method. By analyzing results of these kinds of structures, some important conclusions can be obtained. The artificial dielectric layer in the waveguide center effectively changes the modal distribution in the waveguides. In the case of semiconductor layer, an all optical switch may be realized.

A Multimode Index Detecting Sensor For Use In Plastic Concrete, Qiyu Chen

Theses

This thesis describes a microcomputer-based measuring system using a laser diode source, a fiber optic sensor and a microcomputer DMA interface to test and analyze the entrained percentage of air in concrete.

The principle of refraction and reflection of light in optical fibers is applied to detection of air bubbles. Reflected light intensity signals are detected and transferred through a DMA interface to a laptop computer. Analysis of reflected light intensity produces a measurement of the air content of fresh concrete. Accuracy of the system is evaluated through extensive laboratory and field trials.

Thermal Desorption Of Organic Contaminant From Sand Using A Continuous Feed Rotary Kiln, Hsien-Tsung Chern

Theses

The purpose of this research was to determine the feasibility of removing organic contaminants from sand by thermal desorption. A continuous feed rotary kiln was designed and constructed to study the thermal desorption behavior of organic contaminant from sand with respect to temperature and residence time, and to develop a mathematical model that will describe this desorption behavior. The model will allow prediction of the desorption rate of an organic contaminant in larger scale rotary kiln desorption system over temperature at a known set of residence time.

In this experiment, sand was uniformly contaminated with a known amount of organic …

Some Aspects Of Integration Of Classification, Computer Aided Design, Process Planning, And Scheduling Of Flexible Manufacturing Systems, Suresh Godavari

Theses

This work deals with the role, problems and solution technique for integration of Computer Assisted Design, Classification, Process Planning, and Scheduling for a Flexible Manufacturing System. A lark spectrum of rotational and prismatic parts are considered.

A Knowledge-based rough classification and coding system [C&C] has been developed for coding similar parts using a Group Technology [GT] technique. In this module VP-EXPERT and DBase III Plus are used as expert system and database respectively. This module interfaces with a database for the retrieval and selection process.

The code obtained from the C&C system is the basis for the succeeding phases. The …

Anaerobic Biological Treatment Of Incinerator Ash To Immobilize Toxic Metal Residues, Uma Parasar

Theses

In this study, a reliable and inexpensive method for biologically immobilizing toxic heavy metal residues present in very high concentrations in incinerator ash was developed. Desulfovibrzo, a genus of sulfate-reducing bacteria was cultured and treated with combined ash under anaerobic conditions. The carbon source, lactate, and the electron acceptor, sulfate, were provided to the cultures for their normal growth. Since the sulfate reducers utilize organic matter using sulfate as the oxidizing agent, sulfides are the corresponding end products of the reaction. Ash was added to well established cultures of desu f ovibrio. Immobilization of the heavy metals in the ash …

Dual Token Ring Lan Performance, Pratap S. Pasupuleti

Theses

A simulation model to analyze the performance of a dual token ring LAN is developed. The performance measures throughput, average packet delay and maximum delay per packet are obtained. System performance is analyzed for different loads, number of stations, and packet lengths. The performances of token ring LANs with a conventional structure and a dual ring structure are compared for both uniform packet sizes and a case with mixed packet sizes. In the uniform packet size case, the dual ring delays were lower at equivalent throughput because of propagation delay effects. In the mixed packet size case the maximum delays …

Design, Fabrication, And Testing Of Temperature Compensated Magfet, Dilip K. Sampath

Theses

A simple model based on dc behaviour of MOS transistors operating in weak inversion is derived on the basis of previous publications. The bipolar like source to drain transfer characteristics of MOS transistor in weak inversion was used to implement a voltage source that is proportional to absolute temperature (PTAT); a cell that can be stacked to obtain the desired voltage. A CMOS temperature compensated current reference is implemented using PTAT cell with MOSFET as current defining element. A CMOS magnetic field sensor has been developed. The sensitivity of sensor is dependant on the bias current; incorporation of temperature independent …

An Efficient Annealing Algorithm For Global Optimization In Boltzmann Machines, Rajendra Sarasakrishna

Theses

This thesis proposes a new annealing algorithm for Boltzmann Machines. This algorithm uses an Exponential Formula for temperature scheduling that produces remarkably better solutions for global optimization. The superiority of the new algorithm is shown by computer simulations of several examples on Boltzmann Machine and its variants. This is also shown to have better properties than algorithms like Generalized Simulated Annealing which possess somewhat similar dynamics.

Gas Chromatographic Method For Determination Of 28 Volatile Organic Compounds Emitted From A Sewerage Plant, Yeming Sun

Theses

In this study, 28 volatile organic compounds (VOCs) emitted from the Linden Roselle Sewerage Authority Plant (LRSA) were monitered. The determination by gas chromatography (GC) is presented. This work emphasizes the collection of whole air samples, using a canister-based sampling system with cryogenic concentration. An appropriate temperature program was selected to obtain the best sample separation. The procedure for the identification of 28 standard gas mixture was achieved by comparing the chromatograms of sample with those of the specific groups of target compounds, as well as by comparing the sample with the results from GC Mass spectrometeric analysis. Because of …

Thermal Desorption Of Contaminated Soils, Hsi-Ming Sung

Theses

A new method by employing the heating probe for the in-situ cleanup of soils that are contaminated with volatile organic hazardous substances is explored. This investigation is a laboratory simulation that was aimed to evaluate the feasibility of desorption of volatile organic compoumds (VOCs) from soil, and to determine the efficiency of the heating probe for maximum desorption.

Two organic compounds, Trichloroethylene, Carbon tetrachloride, were selected as simulants. The experimental results demonstrate that the removal efficiency range from 97.65% to >99.95% of Trichloroethylene and 98.14% to >99.95% of Carbon tetrachloride can be recovered for a 24 hour interval with a …

The Application Of Feedback And Control System Theory To Organizational Modeling, Thomas Miklos Tamas

Theses

A review of the literature showed that relatively little attention has been given to the application of feedback and control systems to management. Since a major function of management is control, scientific management might offer assistance in the form of a more quantitative approach to management control. This thesis suggests one might accomplish this through the application of feedback and control systems.

The application of feedback and control theory to management systems is relatively new, however, literature has shown a trend towards the application of electrical engineering theory to non-engineering topics [Khranovich76]. There has also been some research in the …

Experimental Study Of The Internal Loads In A Cardan Joint, Johannes K. Waal De

Theses

A recent investigation by Fischer and Freudenstein questioned the validity of the negligible axial forces assumption in the static force analysis of Cardan Joints. The purpose of this paper is to experimentally assess this assumption for the dynamic case.

To this end an experiment was constructed to determine the axial forces acting on the intermediate revolute joints of a Cardan joint. A four-square test arrangement was prepared such that shaft intersection angle, shaft torque, and shaft speed could be varied. Strain gages were applied to the "arms" of the joint to measure the resulting strains due to the forces along …

Efficient Multiprocessor Scheduling By Mean Field Theory Neural Networks, Pei-Ken Yi

Theses

In this thesis, we develop an optimization method based on Mean Field Theory (MFT) Neural Networks to solve the Task Scheduling problem. The MFT algorithm combines characteristics of the Simulated Annealing (SA) algorithm and the Hopfield neural network. MFT exhibits rapid convergence and at the same time it preserves the solution quality afforded by SA. Since MFT has been successfully used to solve the Traveling Salesman Problem (TSP), a new modification to MFT is also presented which supports Task Scheduling problem. The temperature behavior of MFT during Task Scheduling is approximately analyzed and shown to possess a critical temperature (71,) …

Deposition Of Particles In A Channel With Gravity And Image Forces, Jing-Shiun Lai

Theses

Deposition of particles in a parallel-plate channel under the influence of inertia, fluid viscosity, gravity and image forces was studied using trajectory method.

A laminar fluid flow of uniform and parabolic (or fully-developed) velocity profiles is assumed and the fluid is suspended with particles having the same velocity as the fluid at the inlet plane. The particles flowing into a horizontal parallel-plate channel have no initial velocity in the vertical direction. The influence of gravity force and image force produces a vertical motion which results in deposition of particles on the channel walls.

A trajectory method was employed to find …

Uniformity Correction For Infrared Ir-Ccd Camera, Chien-Ming Leng

Theses

This thesis describes the results of a study of three types of uniformity correction schemes for an infrared camera. More specifically, a Datacube Image System was used to simulate the three uniformity correction schemes for a 320x244-element IR-CCD TV camera with PtSi Schottky-barrier detectors. The three uniformity correction schemes are: one-point uniformity correction with single background, one-point uniformity correction with multibackground and two-point uniformity correction. Datacube programs were developed for the three above uniformity correction schemes and some experimental results were obtained.

On The Estimation Of New Life Model Of Transformer Insulation Material Under Combined Electrical And Thermal Stress, Chiming Lin

Theses

Results of combined electrical and thermal aging and only thermal aging studies conducted on a 'fish' paper insulation material are presented in this thesis.

The model for aging has been proposed which is essentially the Arrhenius equation with a weighted factor {exp -cg/kT1 to describe the enhanced reaction rate process under combined thermal and electrical stress. A procedure has been described for evaluation of parameters of this new model.

It is seen that life estimates obtained with this model are close enough to the experimental results.

In addition, reliability data were also generated on the same material using electrical noise. …

The Bandwidth Allocation Of Atm Through Genetic Algorithm, Hong Pan

Theses

In this thesis, we develop an optimization method based on Genetic Algorithm to achieve the bandwidth allocation of ATM network. In Broadband Integrated Service Digital Network (BISDN), the Asynchronous Transfer Model (ATM) is already adopted as the transfer standard by CCITT. ATM is a high-bandwidth, low-delay, fast-packet switching and multiplexing technique. Using ATM technique, we can flexibly reconfigure the network and reassign the bandwidth to meet the requirement of all types of services. As an effective optimization method, Genetic Algorithm(GA) is applied to implement the bandwidth allocation of ATM. GA is a class of search algorithm based on the mechanics …

Hot : A Timing Optimizer For Hierarchical Vlsi Circuits Using The Charge Conservation Delay Model, Yumei Quan

Theses

The primary benefits of VLSI chips are their high speed, small area, and lower power. These performance attributes are dependent on the quality of chip design. As a result, performance can be optimized by proper design decisions. One of the decisions in chip design is the selection of gate delays and/or transistor sizes (channel width of an MOS transistor).

To optimize the performance of VLSI chips, transistor delay models and optimization algorithms are very important since accurate analytical models for signal delay are essential to replace expensive device level simulation and the high efficient algorithms assist designers in developing high …

Integrated Digital Speech System With Pc, Zhen Zhu

Theses

A PC-based real-time digital speech processing system is designed. Speech synthesis, analysis, storage and retrieval are implemented in the system with intelligent telephone functions. Speech data are stored on floppy disk and easy to retrieve. Though floppy disk is slow in speed, real-time processing is achieved with low bit rate coding. The computer gets speech data from a digital speech processing unit or send data to it through a synchronous seiial communication port. The analog input of digital speech processing unit can be selected from the telephone line or the microphone, and output of the digital speech processing unit can …

Decomposing Non-Product Form Queueing Lattices Through Autorouting With A* Algorithm, Chun-Chang Yu

Theses

Direct solution techniques are expensive for the state transition lattice of a class of non-product form queuing modes. In this thesis, Autorouting with A* algorithm is adapted to decompose it as solvable subsets which can be solved sequentially and independently. Autorouting with A* algorithm is heuristics in problem solving. It also is one of a class of global optimization problems that are difficult to solve. Some queuing modes of type A will be decomposed in this thesis through Autorouting with A* algorithm.

Analysis Of Chemical Contaminants In Tissue Samples From Two Species Of Fish, Michael David Reive

Theses

Interaction of marine species with chemical pollutants within the marine ecosystem is extremely complex and difficult to interpret. The purpose of this thesis was to investigate the effect of an exposure of treated municipal wastewater on winter flounder (Pseudopleuronectes americanus) and striped bass (Morone saxatilis). Fish from two locations were exposed to different concentrations of wastewater. Half of the fish from each tank were sacrificed, and the remaining fish were given a depuration period in unpolluted water. Tissue samples were composited, soxhlet extracted and passed through a florisil cleanup column. Gas chromatography, was used to analyze for hexachlorobenzene, hexachlorobutadiene, Aroclor …

Metamorphosis, Ching-Yuan Chang

Theses

None provided.

Restaurant Meal Cost Trends In Five Of The Top 100 United States Business Travel Cities, Rebecca J. Englehart

Theses

Not listed.

Identifying Rural Touristic Preferences: A Case Of Orleans County, Rene Corene Rhodey

Theses

Not listed.

Motorcoach Carrier And Motorcoach Tour Industry Reviews, A. Timothy Bock

Theses

Not listed.

Food Marketing Distribution: A Pilot Study Of Ardmore Farms, Michele Ann Musella

Theses

Ardmore Farms is one product group that in part comprises the Food-service Division of Quaker Oats Company. They produce portion-controlled, USDA approved citrus and fruit juices. The juice is produced by one plant located in Deland, Florida. It is then shipped throughout the United States via a fleet of more than 120 refrigerated trucks. in fiscal year 1990 Ardmore experienced a financial crunch due to a freeze in Florida. To counteract the negative financial effects of the freeze, Ardmore hastily raised their orices. This aggravated the food-service operators resulting in a "fallout" of Ardmore's customer base. Also many regional juice …

A Descriptive Study On Trekking Attributes In Nepal Using Importance-Performance Analysis, Pasi Ryhanen

Theses

Since the opening of its doors to the outside world, Nepal has seen a large growth in tourist arrivals. One of the fast growing tourist markets attracted to Nepal is the trekking vacationers. In order for the suppliers and decision makers of the trekking product to be able to meet the demand of users it is important that they are able to target the development in the appropriate direction. A lack of communication among the components of the tourism industry has resulted in a lack of cooperation. The purpose of this study is to develop an instrument that enhances communication …

Disposable Versus Reusable Ware: Cost Evaluation Model Development, Ravi Pandit

Theses

The ever growing problem of solid waste, stricter environmental regulations, diminishing landfill space and escalating recycling costs have forced the foodservice operations using disposable ware to find economical alternatives to the solid waste generated. A computerized model was developed that enables foodservice operators to evaluate the cost differences between the use of disposable ware and reusable ware and further make a decision as to which ware is suitable, economically and environmentally, for their operation. The cost evaluation model was based on the 1969 Laventhol & Horwath model developed for the Permanent Ware Institute Chicago, Illinois. The model consists of three …

A Case Study Of Formal Training Of The Front Desk Agent In Rochester/Monroe County, New York, Nicole Marisa Harley

Theses

The hospitality industry is a billion dollar industry based upon customer service. Measure of quality service is an intangible concept based upon the perception of the customer. It is the industry's front-line employee that has the responsibility of fulfilling the perceived image of service the guest has envisioned. In 1991, industries throughout the U.S. budgeted 43.2 billion dollars to be spent on formal training of its employees. The dollar commitment made to training exemplifies a companies commitment to its employees and customers. The formal training of the front desk agent bares the same commitment. In this study is was assumed …