Digital Commons Network^™

Inshade: The Structure Of A Synergistic Approach To Product Design, James Read

Theses

The objective of this thesis is to demonstrate a synergistic approach to the design of a consumer product, INshade.

Digital Camera: An Interactive Tutorial, Roger Martinez I Colom

Theses

The purpose of this thesis is to explore the possibilities of computer graphics applied to the creation of instructional projects. Chosen the topic of "basic photography", I will produce an interactive application that will teach several techniques used when learning photography. The project, fully interactive, will combine several media (computer generated images, acquired images, sound, etc.), all controlled by the computer. The main goal is to develop a proper user interface which allows any person to utilize the application. The original proposal, cited above as it had been turned in to the Department, was slightly transformed. Rather than changed, it …

S.57392, Christine Lo

Theses

The idea of creating and writing a thesis loomed before me as an awesome task I would never be able to bring to fruition. However, the time came when I had to sit down and seriously ask myself how I would like to spend the remainder of my time here at RIT. Regretfully, I cannot say that there was a burning passion within me. I began to approach the thesis topic and asked myself, "What is out there that has yet to be fully explored?" Looking through several articles and speaking with a diverse group of people, I became involved …

Design And Implementation Of An Asynchronous Version Of The Mips R3000 Microprocessor, Scott Siers

Theses

The goal of this thesis is to demonstrate the feasibility of converting a synchronous general purpose microprocessor design to one using an asynchronous methodology. This thesis is one of three parts that details the entire design of an asynchronous version of the MIPS R3000 microprocessor. The design excludes all of the memory support features of the processor for two reasons. First, the memory is already handled asynchronously and second, the size of the project must be limited. This design has implemented the entire set of instructions from the original synchronous version with the exception of certain memory instructions. The three …

The Use Of Plasma-Generated Silicon Dioxide-Like Coatings As Charge Storage Media For Electrets, Xiaorong Lin

Theses

The object of this project is to study the electret properties of silicon dioxide coating. Silicon dioxide coatings were produced by microwave plasma chemical vapor deposition under various conditions such as pressure, flow ratio, power, etc.. DC bias, thermionic emission and corona charge were used to produce charges in the silicon dioxide film. The results include measurements of deposition rate of silicon dioxide, the absorption wavenumbers, the thickness and index of silicon dioxide coating. The electret properties were focused on the charging process, charge distribution and charge decay rate.

An Extensible, Scalable Microprocessor Architecture, Matthew Dinmore

Theses

An extensible, scalable stack-based microprocessor architecture is developed and discussed. Several unique features of the architecture, including its non-memory oriented interface, and its use of a stack for holding and executing code, are detailed. A programmed model is used to verify the architecture, and a hardware implementation of a small-scale version of the architecture is constructed and tested. Notes for future implementations are provides. Possible applications based on the latest technological trends are discussed, and topics for further research into the architecture are listed.

A Digital Signal Processing-Based Predistortion Technique For Reduction Of Intermodulation Distortion, Richard James Buckley

Theses

Linearization of power amplifiers has been the topic of many studies, dating back to the work of H. S. Black in the 1920s. For many applications, the well-documented techniques of feedforward and feedback can be used to design low intermodulation distortion (IMD) amplifiers. However, certain applications, including the design of high-power, radio frequency amplifiers, preclude the use of these techniques. The work herein describes an alternative to presently accepted distortion reduction techniques. In-band IM distortion (multi-tone distortion located close in frequency to the desired signal) , is reduced by modifying a baseband input, upconverting this signal to the transmission frequency, …

From The Screen Through The Screen, Marianne O'Loughlin

Theses

This thesis project's aim is to transfer the early or beginning read er's interest and focus from the video screen; i.e.: television or Nintendo, to the printed text of the book through interaction with the computer by reinforcing the narrated story with on-screen text. Much like read-along audio tapes, the premise of this thesis is to combine pictures, words and sound into a computerized support for a story. To create interest for the proposed age group, the criteria used will be based on an entertaining tale, quest, or game, rich in language and illustration, intermixed with humor. The goal is …

Uaguzi, Christopher Erin Walsh

Theses

I came to RIT, for a MFA in Computer Animation, with one aim in mind: to learn 3D animation. The most difficult part about my animation theses was finding a project that would challenge all that! had learned up to this point. I didn't want to just fly the camera around objects, as I'd seen in previous theses' and three dimensional animations. That was the easy way out! I set my goals high. I wanted to see if I could bring characters to life in 3D. I wanted to take traditional two dimensional character animation techniques and apply the movement …

Performance Of The Stirling Cycle Thermal Regenerator, Cesar A. Cravo

Theses

Most of the methods developed to analyze the performance of regenerators make assumptions which are not valid in Stirling cycle regenerators. To more adequately describe the conditions of an actual Stirling cycle regenerator a more complex method has been investigated. This method takes into account the time dependence of the mass flow and pressure fluctuations and considers the temperature dependence of the thermophysical properties.

The solution is accomplished by finite difference techniques. The solution determines the temperature distributions of the gas and matrix along the length of the regenerator and calculates the effectiveness over a cycle. A wide range of …

Design Of Mask For Striped Filters And Thin-Film Multi-Layer Emissivity Modeling For Multi-Wavelength Imaging Pyrometer, Jitesh Navinchandra Shah

Theses

Multi-Wavelength Imaging Pyrometry (M-WIP) measures thermal radiation of any target (color or gray) in multiple narrow-spectral-regions and can simultaneously determine target temperature and emissivity. One approach for measuring radiation at multiple wavelengths using a 320X244 element Pt-Si SBD infrared camera is to use narrow-band striped filters deposited on a transparent substrate with proper alignment. The major focus of this thesis was the design of a four layer mask for investigating the feasibility of defining three-wavelength striped filters compatible with focal plane array. This mask design allows twelve distinct narrow band striped filter geometries and four test-patterns on a 4-inch silicon …

Finite-Element Ray Tracing, Yong-Chun Liu

Theses

The interesting acoustic modeling problems often push the practical limits of full-wave models. For instance, in acoustic tomography one needs to be able to predict the propagation of an acoustic pulse for successive realizations of 31) environments. For these types of problems ray methods continue to be attractive because of their speed. Unfortunately, existing codes are prone to a number of implementation difficulties which often degrade their accuracy.

As a result most ray models are actually incapable of producing the ray theoretic result. We discuss a. new method for implementing ray theory that uses a. finite-clement formulation. This method is …

Agitation Requirements For Complete Liquid Dispersion In Liquid-Liquid-Gas Systems, Emad Ahmad Abu-Hakmeh

Theses

A number of studies have been published in the literature on the determination of the agitation intensity at which two immiscible liquids become completely dispersed in mechanically agitated vessels. However, no information is currently available on the agitation intensity required for the complete dispersion of two liquids in the presence of an additional gas phase. Therefore, the main objective of this study was to experimentally determine the minimum agitation speed for complete liquid-liquid dispersion, N_cd, in liquid-liquid-gas systems as a function of gas flow rate, impeller type, impeller size, and impeller off-bottom clearance. The minimum agitation speed was …

Attachment Systems For Curtain Wall Construction And Maintenance Requirements, Peter S. Donaghy

Theses

Curtain Wall construction has become a familiar and widely used method for enclosing structures. Since the 1950's this type of enclosure has become increasingly the most popular choice of Designers and Builders. During this period of development, however, acceptable and uniform building standards have not evolved to create adequate quality control.

This thesis investigates some of the design requirements of Curtain Walls, in particular the attachment system, and the maintenance costs that are directly related to the attachment system and the consequences of such failures.

Rigorous Te Solution To The Staircase Model Of The Dielectric Wedge Antenna, Wan-Yu Chen

Theses

The rigorous TE solution to the staircase model of the dielectric wedge antenna is presented. The fundamental, even TE surface wave mode of the dielectric slab waveguide is taken to excite a dielectric wedge which is formed by symmetrically tapering the slab. The method of solution is based on Marcuse's step-transition method. Radiation patterns of power gain are presented which show increased maximum power gains and narrower main lobe beamwidths for longer wedges. For higher dielectric constant material, the main lobe beamwidth is increased. In all cases examined, negligible sidelobes were obtained.

Processing And Application Of Polyolefin Plastics, Muhammad Khalid

Theses

This thesis describes the manufacturing, processing and application of polyolefin thermoplastics. Polyolefins have become one of the most important kinds of plastics. Polyolefin resin represents about one third of all plastics sold and its application for films and containers dominate the packaging industry. The objective of this thesis is to present the various processing methods and application of polyolefin thermoplastics. Polyolefin is produced by several different processes. Conventional low density polyethylene is made by polymerizing ethylene at high pressure and high temperatures while high density polyethylene is polymerized at relatively low pressure and low temperatures. Generally all polyolefin possess excellent …

Investigation Of Reaction Kinetics Of Hydrogen Chloride With Calcium Oxide By Fourier Transform Infrared Spectroscopy, Maosheng Li

Theses

The kinetics of HCl reaction with CaO was investigated over the temperature range of 148 to 400 °C. A thin film of CaO was deposited on quartz wool and used as the sorbent. The HCl concentration was maintained uniformly in the closed system with a circulating pump in order to minimize the effects of the bulk mass transfer and pore diffusion. The HCl concentration was continuously monitored in a FT-IR cell and the HCl and H₂O spectra were collected automatically by GC software at 1.2 second intervals. In this way, fewer errors were introduced into the system. The …

Radiation From A Tapered Dielectric Rod Antenna, Anil Prabhakar

Theses

The radiation fields from a cylindrical dielectric taper is studied. The numerical results of a theoretical model for a taper excited by the dominant HEn mode is compared with experimental measurements. A theoretical mode] for the next propa¬gating mode in the structure. the TE01 mode. is investigated and numerical results based on this proposed model are generated. The theoretical models are based upon the combination of the exact modal field solutions for a step profile cylindrical dielectric rod waveguide. local mode Hum-T. and the equivalence principle for the determination of equivalent current densities.

The far-zone radiation field is considered to …

Experimental Investigation Of Submerged, Turbulent, Axisymmetric Air Jet Impinging On A Flat Plate, Lan Xiao

Theses

Experimental investigation was carried out on the flow characteristics of a circular, submerged, turbulent, axisymmetric air jet impinging normally on a smooth, flat, square, Lucite plate and a sand paper covered plate. Jet issuing from a circular nozzle of 0.5 inch diameter while the Reynolds Number varying from 10,000 to 85,000 was investigated. The flow can be considered incompressible since the pressure and the velocity of the jet were not too high, with Mach Number of the order of 0.3.

Various flow parameters were measured to obtain the velocity and pressure distributions at the surface of the flat Lucite plate, …

Comparison Between Stimulated Emg And Natural Emg, Zak Belfki

Theses

The electromyograph (EMG) signal generated from a cat's jaw muscle in movement, is analyzed. After a series of experiments at UMDNJ, three major categories of EMG were recorded: rest EMG, biting EMG and hissing EMG.

The biting files contained a series of EMG collected in successive episodes. Power spectrum and statistical analysis were applied to the episodes. Each episode had approximately 43,000 samples. Results showed that these episodes had a similar spectrum with statistically the same mean and variance.

The hissing files were produced by electrical stimulation of the hypothalamus and contained EMG embedded in a stimulus artifact. The problem …

A High-Temperature Pressure Sensor Utilizing Linear Voltage Differential Transformer (Lvdt) And Silicon Wafer-To-Wafer Fusion Bonding Technologies, Robert Sylvester Okojie

Theses

A novel high-temperature pressure sensor was designed based on the principle of magnetic induction. The device is meant to correct the problems inherent in conventional Solid-State pressure transducers such as piezoresistive and capacitive at temperatures above 300°C. Prominent among these problems are increased leakage current, reduced absolute sensitivity, redistributed impurity concentration profile, and thermal mismatch.

This thesis combined the Biot Savart magnetostatic principle and the theory of deflecting clamped circular plates to obtain the microelectromechanical relationship. The problem of thermal mismatch was resolved by the symmetrical layering of a Si₃N₄/TaSi₂/Si₃N₄ sandwich, …

Magnetohydrodynamic Behavior Under Current Impulse Excitation, Shi Wu

Theses

The effects of magnetic field on magnetohydrodynamic (MHD) channel flow between two parallel plates of infinite extent are investigated. The applied magnetic field is due to an infinite impulse current-carrying conductor located a small distance below the lower channel wall. Influence of the induced magnetic field, such that the magnetic Reynolds number (R_m) is less than unity but greater than zero, is included. The solution is obtained using the perturbation theory in the expansion of the field components in a double-power series in R_m and I. Calculations for the magneto-fluid components were carried out using personal computer. …

Evaluation Of Collision Properties Of Spheres Using High-Speed Video Analysis, Jian Yu

Theses

Experimental evaluation of the collision properties of spheres is performed using video image analysis techniques. A high-speed Kodak EktaPro1000 video camera is utilized to record a collision sequence between two spheres at 1000 frames/sec, and then the images are analyzed to calculate three dimensional translation and rotation before and after the collision. These quantities are used to compute the collision properties for a pair of one inch nylon spheres, i.e. the coefficient of friction, and the coefficients of normal and tangential restitution. The focus of the thesis is on image analysis techniques that provide high accuracy results even though the …

Synthesis And Characterization Of Silicon Nitride Films Deposited By Plasma Enhanced Chemical Vapor Deposition Using Diethylsilane, Yanyao Yu

Theses

Silicon nitride thin films were deposited on silicon substrates using Diethylsilane (DES) and ammonia by Plasma Enhanced Chemical Vapor Deposition (PECVD) over a temperature range of 100 - 300°C, a pressure range of 0.2 - 0.6 torr, and a ratio of NH₃/DES was varied from 6 - 26. The R.F. power and frequency were kept at 0.15 watts/cm^{2 and 100 KHz respectively. DES flow rate was set at 15 sccm for all experiments in this study. One set of experiments were performed at different values of one parameter while the other parameters were kept constant.}

The deposition …

Design, Fabrication And Characterization Of Infrared Filters, Samiul Amin

Theses

In-situ temperature monitoring, mapping, and control have become significant in semiconductor processes. Temperature of these processes can be measured by making use of the thermal emission from substrates in the infrared region. Various methods have been proposed to provide multicolor infrared detection. One such method involves placing segmented infrared filters close to the focal plane. The present study aims at gaining an insight into the design, fabrication and characterization of infrared filters. Filters were designed and fabricated with peak transmission at 1.5, 3.0, and 4.5 m. Extensive spectroscopic studies, using FTIR spectroscopy, have been performed in the infrared region, on …

Characterization Of Three-Dimensional Shear Flows, Kurra Bhaswan

Theses

This work investigates techniques to analyze and characterize the presence of microstructure in moderately dilute three-dimensional shear flows. In three dimensional shear flows, a distinct structure develops as the coefficient of restitution is lowered with the particles exhibiting a strong tendency towards the formation of clusters. There exists a need to automatically detect and characterize this microstructure in the given flow. Several methods are examined for effective characterization of the microstructure. The techniques employed are based on the classification of the data based on the properties of the Voronoi diagram constructed from the positional parameters of the two-dimensional slices of …

Nitric Oxide Absorption From Flue Gas With Cumene Hydroperoxide Solution, Chung-Der Chen

Theses

The absorption of nitric oxide from gas streams with cumene hydroperoxide (CHP) in n-hexadecane (cetane) as the scrubbing solution was investigated. The efficiency of the scrubbing solution to remove nitric oxide was evaluated over the temperature range of 90 to 110°C, concentration range of 0.1 to 0.5M, and residence time of 12 to 80 seconds. The products were analyzed by gas chromatography (GC), Fourier transform infrared spectroscopy (FTIR), and ion chromatography (IC). The goal of this research was to determine the NO removing efficiency of cumene hydroperoxide solution, a relatively inexpensive tertiary organic hydroperoxide. Also, a possible reaction mechanism for …

Traffic Management Of A Satellite Communication Network Using Stochastic Optimization, Ambalavanar Arulambalam

Theses

The performance of nonhierachial circuit switched networks at moderate load conditions is improved when alternate routes are made available. However, alternate routes introduce instability under heavy and overloaded conditions, and under these load conditions network performance is found to deteriorate. To alleviate this problem, a control mechanism is used where, a fraction of the capacity of each link is reserved for direct routed calls.

In this work, a traffic management scheme is developed to enhance the performance of a mesh-connected, circuit-switched satellite communication network. The network load is measured and the network is continually adapted by reconfiguring the map to …

Detection Of Planar Facets In Noisy Range Images, Ajey S. Atre

Theses

Segmentation of the image is one of the major tasks of a machine vision system designed for constructing a three-dimensional representation of the object being imaged. A robust approach for segmenting planar surfaces from range images is presented in this paper. An algorithm based on clustering through fuzzy covariance matrices, which has been proposed by Gustafson and Kessel is considered for planar segmentation. However this algorithm performs poorly if the data is noisy, which is usually the case in real life applications. In order to handle noisy data, a robust modification, based on the "noise clustering" concept, is introduced to …

Computer Assisted Molecular Modeling Of Thymidine Nucleoside Analog Inhibitors Of Hiv-1 Reverse Transcriptase, Mark A. Fisher

Theses

An active analog approach to receptor mapping was used to identify the three dimensional structural characteristics associated with a series of thymidine nucleoside analog inhibitors of HIV-1 reverse transcriptase (RT) that may be essential for their activity. Atomic substitutions at the 5 and 3' positions of nucleoside analogs confer global structural and electrostatic changes that result in either increased or diminished inhibitory activity. From a structural perspective, the activity differences can be attributed to the presentation of select atoms in three dimensional motifs that are common to all active compounds and absent or distorted in inactive/poorly active compounds.

The identification …