Digital Commons Network^™

Toward A Model Of Instruction For Architecture Design Studio, Garry Allen Perryman

Theses

This inquiry addresses some fundamental issues raised in a debate over the effectiveness of architecture studio instruction. It argues that as currently structured the studio's potential effectiveness is often unrealized, because of the paucity of standardized educational resources and instructor's lack of training in educational theories of instruction. This has resulted in instructional planning that is seldom structured on educational theory or research. It is also argued that in order to maximize it's effectiveness, beginning studio instruction must be premised upon a theory of instruction which includes specifying explicit instructional goals and objectives and that this would create a more …

Robotic Arms With Flexible Links As The Links Approach Rigidity, George A. Downes

Theses

The dynamics of single link flexible robotic arms are modeled using the Bernoulli-Euler beam equation and Lagrange's equation. The Bernoulli-Euler beam equation derivation is reviewed and is studied in the limiting case as the flexiblity approaches zero. Using the Bernoulli-Euler beam equation, a procedure is developed to calculate the position of the endpoint of a link given the displacement, slope or curvature of any point on the link. Also a procedure is developed to calculate the minimum Young's modulus of elasticity, E, given a specified endpoint displacement tolerance.

A rigid link model based on Lagrange's equation and a flexible link …

Theoretical Analysis Of Universal Joint With Manufacturing And Assembly Tolerances, Xiaosong Liu

Theses

The model for a Cardan joint with manufacturing and assembly tolerances is a spatial four-bar mechanism with one rotating and three cylindrical joints. In this thesis, dual-number coordinate transformation matrices and Newtonian mechanics are applied to provide a concise description of the kinetics of the universal joint. The dual-Euler equations are used to derive the dynamic equations of the Cardan joint. The analytical technique presented here yields explicit expressions. It will provide the designer with better insight into the workings of the kinematics and dynamics of the Cardan joint.

The equations of statics and dynamics of the frictionless universal joint …

Equation Of Interaction Diagrams For Prestressed Concrete Columns, Angamuthu Palaniappan

Theses

A general analysis and design equation for prestressed concrete column is proposed. This equation represents the strength interaction diagrams of prestressed concrete columns under bending about one axis and combined with axial load. The equation proposed is a modification of the one developed by Dr. Hsu, C.T. Thomas for reinforced concrete columns published in the ACI structural journal in 1988. The analytical results were compared with the results of tests on 30 eccentrically loaded prestressed columns reported by H.R. Brown and A.S. Hall. The results were in good agreement with the static analysis and the above mentioned test reports. The …

Design And Analysis Of An Intracranial Pressure And Temperature Sensor Telemetry System, Anshumat Parasar

Theses

This thesis presents a signal conditioning and telemetry system for an implantable pressure and temperature transducer. The initial target application is for measuring the epidural intracranial pressure in the range of 25-100 millitorr and temperature over the range 90 — 110° F. The implant, based on custom silicon IC design can be packaged within a volume of 2cm3 and will require surgical procedures for placement and removal. Effort has been made in this thesis to design the transducer, associated signal conditioning and telemetry circuits for useful operation over a wide range of power supply voltage. The implanted device is powered …

On-Line Dot Matrix Code Verification, Thatta V. Premnath

Theses

Machine vision principles are increasingly applied in the areas of manufacturing and automated inspection. The objective of this thesis work is to investigate different methods that could be implemented for matching printed dot matrix characters with the actual characters to be printed.

In support to this investigation, a survey of various methods proposed by researchers in the field of Optical Character Recognition (OCR) is presented. Survey includes a detailed description of the state-of-the art methods. It is shown that due to restrictions of hardware cost and the time available to inspect each character, the standard approaches are not practical. Hence, …

Study Of Acetone Extractable Organic Matter From Airborne Particulate Matter From An Urban Site, Wenhui Wu

Theses

Two seasonal periods (Winter 1988; Summer 1988) of daily Newark urban air samples were collected on glass fiber filters. Each filter was first extracted with dichloromethane and subsequently with acetone. Quarterly composites of each were then tested for mutagenicity. The results of the analysis of the less polar dichloromethane extracts were reported in the thesis of Junghen Lwo. A modified fractionation scheme involving acid-base partitioning and silica gel column chromatography has been used as the first step in the bioassay-directed search for significant levels of mutagenic compounds in extracts of inhalable (IP 10) ambient air particulates. The biologically "hot" fractions …

Analysis Of C2 And C3 Hydrocarbons In Ambient Air. Part 1 ; Development Of Simple Analysis For Polycyclic Aromatic Hydrocarbons. Part 2, Li-Li Wu

Theses

SECTION I

A method was developed to analyze C₂ and C₃ light hydrocarbons: Acetylene, Ethylene, Ethane, Propyne, Propylene and Propane levels in the ambient air. Chlorinated compounds which eluted within the gas chromatograph operation conditions needed for the above hydrocarbons included Freon 12 and Methylene chloride, were also monitored.

Samples were collected from two sites, one located at Carteret and one at Elizabeth New Jersey. Samples were taken from September 1988 through July 1989. The sampling method used stainless steel canisters and was set up to collect 24 hour air samples at a constant flow rate of 30-35 …

A Comparison Study Between The Tenax Trap And The Canister Collection Methods For Determination Of Volatile Organic Compounds, Li-Ching Lillian Hung

Theses

A comparison between the analytical methods for determination of volatile organic compounds, using Tenax GC as an adsorbent and using stainless steel canister collection is made.

Sample collection, analytical system and procedures, data analyses, as well as their fortes and their drawbacks, etc., are discussed.

In addition, a brief description of the developmental history of the above methods as used in the Air Pollution Research Laboratory at the New Jersey Institute of Technology in Newark, New Jersey, is given.

Process Modelling Of The Nitration Of Toluene, Nitin K. Shah

Theses

The thesis on the process modelling of the nitration process focuses specifically on the product separation of the nitrated aromatic material from the reactor and - wash section of the process. Included in the text is an overview of the main process steps associated with the production of para and ortho-nitrotoluene. The critical issues concerning the reaction of nitric acid and toluene were summerized, and resulted in this subject being deferred for future work.

The separation of the isomers into pure components is an important. part of the MNT process because of the close high boiling points of the isomeric …

Recursive System Identification Using Least Squares Method, Gholamreza Ghorbani Moghadam

Theses

Input and output sampling, in addition to computer simulations, are now an integral part of system identification. In this thesis, the concept of analyzing any time invariant continuous deterministic system will be developed by identifying a linear discrete - time system equivalent to the continuous one. In this method, two computer programs are written in pascal. The first program applies the Recursive Least Squares Method to discrete - time systems in order to estimate the system components. The second program estimates the future output of the system. Four systems have then identified using the programs.

In this process, system identification …

Adaptive Transform Coding Of Video With Motion Compensation And Vector Quantization, Jung-Hui Chien

Theses

This thesis proposes an efficient transform coding scheme for the low bit rate video sequence. The redundancy within adjacent video frame is exploited by motion compensated interframe prediction using the efficient independent orthogonal search technique, and the motion compensated frame difference (MCFD) signal is transform coding by 1-D DCT, 1-D HDCT and 2-D DCT, the coefficients are zonal masked, and vector quantizatied adaptively. The encoded MCFD as well as the motion information and variance grouping (side informations) are transmitted to the receiver to reconstruct the frame. The transform MCFD signal is classified into the four groups according to the coefficient …

The Study Of Paper Surface Efficiency, Wandee Charoenpholphibool

Theses

Paper surface efficiency (PSE) is a response resulting from the combination of paper gloss and oil absorptivity. A review of previous studies regarding the effect of paper surface efficiency on printed process color appearance is presented. This previous work related densitometric responses to PSE in terms of hue error and grayness. This current study investigated the PSE response in a similar manner, but densitometric responses were replaced by colorimetry. The colorimetric terms used were chroma (C*), huedifference (AH*), and lightness(L*). These correspond to hue error and grayness of the densitometric responses. Simple linear regression models relating the PSE and each …

Towards A Theory Of Planning Aesthetics : Application To University Commons, Newark, Kathy M. Gonzalez

Theses

A theory of planning aesthetics will be developed and discussed in relation to a portion of the university area of Newark consisting of N.J.I.T., Rutgers, Essex County College, University of Medicine and Dentistry of New Jersey. The site is just east of the campuses and contains the Newark Museum and the Newark Library.

The aesthetics of order will be covered at a community scale (the urban context) which will then be detailed as a study of the fractile portion of that entity (the building entity) relative to open spaces which give both entities character. Important in this work is three-dimensional …

Computerize Data Information For Architecture Design, Syau-Yi Yu

Theses

Computer-aided architectural design is technically and commercially feasible yet experience in the architectural profession to date is paradoxical. Many who apply computers to architecture appear satisfied but the tangible benefits are seldom obvious and even where computers are used in firms it is not done to the fullest potential. Contents of this thesis are an attempt to help architecture better utilize the advantages of computer applications.To do this it is important to examine two question: what is design and what is the computer? They are similar yet distinct. Architectural design is a special kind of problem solving process; an information …

Effects Of N>M Clos Networks On Edge Coloring And Matrix Decomposition Algorithms, Ming-Hsing Lin

Theses

Considered in this thesis are n > m Clos networks on edge coloring and matrix decomposition algorithms. This work uses a two-fold approach to examine the effects of n > m Clos networks on edge coloring and matrix decomposition algorithms. First, edge coloring and matching on bipartite multigraphs are applied to routing on Clos networks. It is demonstrated that edge coloring algorithms which find a minimum edge coloring set up the routing for n > m Clos networks with redundancy. The results presented here indicate that the Euler coloring algorithm has applications on n > m Clos networks because it has fast time complexity …

Optimization Of Throughput And Stability For Csma/Cd Channel, Liangshyng Jou

Theses

Multiple access technologies plays an important role in designing distributed computer communication system. Here, CSMA/CD has attracted researchers' attentions in the last ten years. In this paper, based on attributions of the slotted, nonpersistent CSMA/CD system, performance of CSMA/CD channel is analyzed. Adaptive Retransmission Technique is adopted to obtain the maximum throughput. Also, equilibrium contours are derived to discuss the stability of the system. And use FET to measure the stability of CSMA/CD channel that FET gives an approximate measure of the average uptime of an unstable channel.

Hplc Analysis Of Pah And Selected Substituted Derivatives In Waste Incinerator Emission Particles. Section I. Analysis Of Uptake Of Bap By Earthworms Living In Bap-Contaminated Soils. Section Ii, Chin-Fang Juang

Theses

Polycyclic aromatic hydrocarbons ( PAH ) are quite persistent and some of them are potent carcinogens in mammals. They have been found in many environmental media including air, water, soil, fly ash, sediment, sewage sludge, food and plants. This thesis is a study of PAH sampled from incinerator emissim particulates, air, soil, and earthworms raised in artificially contaminated soil.

In Section I, a method is described for the analysis of PAH, nitro-PAH and quinones extracted from filters and detected by HPLC. They were collected on particulate filters which were sampled using the EPA Modified Method 5 regime from incinerator emissions. …

Integrating Process Skills With Content In Sixth Grade Science, Beatrice Mackey

Theses

This science curriculum on the flower and simple and compound machines was developed for sixth grade. It was designed to include the objectives suggested by the Core Competencies and Key Skills for Missouri Schools. It was designed to give practice in the process skills. The author felt the need for this curriculum to fill the gap between what our local science curriculum offers and what the State Department of Education suggests that we teach.

Research indicates that the sixth grade science curriculum should provide the opportunity for children to learn science concepts and conceptual schemes, and to become familiar with …

A Shift Variant Filter Applied To Edge Trace Analysis, David C. Johnson

Theses

A shift variant filter that automatically locates edge toe and shoulder points was used to reduce the noise in the plateau regions of simulated edges having uncorrelated noise. Edges were generated from Gaussian and triangle spread functions and represent edges produced by linear imaging systems only. Versions of these having flare were also used. For comparison a simple "chop" filter was applied to the same edges. Optical Transfer Functions were generated from the 12 categories of edges, ie. unfiltered, shift variant filtered, and chop filtered for each edge type. Modulation transfer functions of these were compared with MTFs of noiseless …

Determination Of Image Quality For Added Noise As A Function Of Spatial Frequency, Yun-Ching Kuo

Theses

The noise in color images which is referred to as chromatic noise represents a distribution within three spectral bands and contributes to chromatic and achromatic visual effects. The chromatic noise depends very strongly on the spatial frequency response of the visual system. Therefore, this study characterizes the variation in perceived chromatic noise level and generates the noise field to add to the color image samples. From these degraded images, we found that noise in low spatial frequencies is much more disturbing than in the medium and high spatial frequency regions. The perceived quality scales of the modulated chromatic noise images …

A Workshop For Parents Of Children With Learning Disabilities, Kathy Taylor

Theses

The purpose of this paper was to justify the need of a workshop for parents of learning disabled children . The need determined by the result of a questionnaire filled out by the parents of LD children.

Once the need of the workshop was established a review of the literature in the field of learning disabilities was completed . This was done to give the presenter the necessary background to conduct a factual and effective workshop . Research was included on historical background of the LD field, definitions, characteristics, and social issues.

Methods of an effective presenter were also researched …

The Independent Fee Appraiser: A Survey Of The Appraisal Profession, Roger P. Durkin

Theses

No abstract provided.

Modal Analysis Of A Robot Arm Using The Finite Element Analysis And Modal Testing, Shashank C. Kolhatkar

Theses

The objective of the present work was to study the technique of modal analysis using theoretical and experimental methods. A PUMA UNIMATION five axis robot was used as a model. The finite element analysis was performed using MacNeai Schwendler Corporation's NASTRAN code. Intergraph's Rand Micas pre- and post-processor was used to discretize the model and subsequently to display the animated mode shapes after the analysis was done with NASTRAN. The modal testing was performed using Structural Measurement Systems' STAR software and Bruel & Kjaer's instrumentation including a spectrum analyzer, accelerometer and hammer. Due to the size and weight of the …

Environmental Impact Assessment For Water Resources Projects : Planning Procedure And Analytical Methods, Mahadesh C. Tumkur

Theses

This thesis presents a state of the art review of environmental impact assessment procedures utilised in the water resources projects which have evolved over the past two decades. The methodologies employed and some of their limitations which exist and are inherent in both the planning and assessment phases of analysis are identified. The above was supplemented by an investigation of the various views of professionals currently employing the above methodologies. The review effort summarizes the relevant information obtained from the literature which is rather dynamic because of the ever evolving nature of the field. One conclusion drawn from this study …

A Robot Vision System For Determining 3-D Coordinates Of Object Points, Tea-Quin Kim

Theses

A stereo disparity algorithm is implemented on an industrial robot vision system. One camera manipulated by an industrial robot is used to obtain stereo images of an object. After a pair of stereo images are processed, the points of interest are selected from each image. The similarities of three types of feature characters are used to assign initial weights of the, matching probabilities to a set of point candidates. Then a relaxation method, which is based on probabilities of local connectivity, similarity of feature characters, and smoothness of matching, is used iteratively to improve the initial probabilities of image matching. …

Competitive Bidding Strategy In The Construction Industry : A Game Theoretic Approach, Hongbin Chen

Theses

A game theoretic approach is applied to analyze competitive bidding in the construction industry because previous models do not consider the conflict of interest that exists among competitors. The game theoretic model improves corporate performance when compared to previous Bayesian analyses.

The game theoretic model is discussed in conjunction with construction contracting practice. Competitive bidding is formulated as a game theoretic model in which a contractor optimizes his bid price to maximize his utility or corporate performance. Using available historical data, order statistics are employed to access the distribution of estimated costs among bidders for a project. The winner's curse …

Investigation Of Major Mutagenic Substances In Airborne Particulate Matter : Biologically-Driven Analysis Of Fractions And Analysis Of Polycyclic Aromatic Hydrocarbons (Pahs) Nitro-Pahs And Other Classes Of Compounds, Jung-Hen Lwo

Theses

A modified fractionation scheme involving acid-base partitioning and silica gel column chromatography has been used as the first step in the bioassay-directed search for significant levels of mutagenic compounds in extracts of inhalable (IP10) ambient air particulates. The biologically "hot" fractions were separated and analyzed chemically or subfractionated to isolate and concentrate "hot" subfractions which were then chemically analyzed by GC/MS FTIR, and HPLC equipped with UV, Fluorescence and Photodiode Array UV detectors.

The Ames assay of mutagenicity has involved the unactivated TA98 strain of Salmonella and enzyme-activated (TA98+S9) assays. In addition, some assays have been performed in this present …

In Vitro Biocompatibility Study To Determine The Synergistic Effect Of Components For An Artificial Bone Graft Material, Levelle Elise Burr Alexander

Theses

A composite bone graft material which can induce or promote new bone growth has potential orthopaedic applications in the repair of bone defects or the stabilization of surgically implanted devices. This material should be biocompatible, have good handling properties, promote osteoinduction and/or osteoconduction and have a good shelf life. Demineralized bone matrix and bone morphogenetic protein have been demonstrated to promote osteoinduction in vitro and in vivo.

This in vitro study examined the inductive ability of an osteoinductive protein, bone morphogenetic protein, when absorbed on non-active devitalized bone matrix. In culture, fetal rat muscle was grown on powdered rabbit demineralized …

An Intelligent Electrocardiogram Tutoring Package Ekgchallenger, Santosh K. Ananthraman

Theses

This thesis presents the development and implementation of an intelligent electrocardiogram tutoring package, namely, EKGCHALLENGER which is meant for use in medical schools to teach medical students a method of diagnosing electro cardiograms.

EKGCHALLENGER is an IBM - PC based, user friendly package. It works in two basic modes. The first is a tutorial mode wherein the user is taught the step-by-step diagnosis of electrocardiograms ( EKGs ) which are presented in order of increasing difficulty. The second is the challenger mode wherein the user is asked to diagnose EKGs which are randomly chosen from an EKG database. The diagnosis …