Digital Commons Network^™

Evaluation Of Eor Potential Of Low Salinity Polymer In Enhancing Heavy Oil Recovery On The Alaska North Slope, Shize Yin

Masters Theses

"Alaska's North Slope (ANS) contains vast amount of viscous oil resources that have not been extracted. This study focuses on the investigation over the potential shown by low-salinity polymer flooding in improving the recovery of ANS heavy oil through laboratory experiments.

At the beginning, coreflooding experiments were performed with silica sandpacks. The synergy between low-salinity water flooding and polymer flooding was proved, and the low-salinity polymer showed a better performance than the normal-salinity polymer. Further, the sandpacks prepared with formation sand from an oilfield on the ANS was then employed so as to simulate the reservoir condition. A series of …

Rhetorical Analysis Of Statements Of Purpose (Sps) For Admission To Graduate School: A Shared-Understanding Perspective Of The Sp Genre, Priyanka Ganguly

Masters Theses

"In this study, I analyzed twenty-four statements of purpose (SPs) submitted to the Department of English and Technical Communication at Missouri University of Science and Technology (Missouri S&T) by current and former students. My goal was to determine the applicants' shared understanding of the SP genre. I analyzed the SPs from three dimensions: rhetorical moves, rhetorical appeals (pisteis), and rhetorical style (elocutio).

To understand the rhetorical moves used by the applicants, I analyzed the content of their SPs according to the categories (moves) and codes (steps) validated in my pilot study. To understand the arguments used by the …

On Predicting Stopping Time Of Human Sequential Decision-Making Using Discounted Satisficing Heuristic, Mounica Devaguptapu

Masters Theses

“Human sequential decision-making involves two essential questions: (i) "what to choose next?", and (ii) "when to stop?". Assuming that the human agents choose an alternative according to their preference order, our goal is to model and learn how human agents choose their stopping time while making sequential decisions. In contrary to traditional assumptions in the literature regarding how humans exhibit satisficing behavior on instantaneous utilities, we assume that humans employ a discounted satisficing heuristic to compute their stopping time, i.e., the human agent stops working if the total accumulated utility goes beyond a dynamic threshold that gets discounted with time. …

Prediction Of Crack Propagation In Zrb₂-Carbon Based Composites Using The Extended Finite Element Method, Leiren Danielle Jarvis

Masters Theses

“The ultra-high temperature ceramic, zirconium diboride (ZrB₂) has long been researched for applications in extreme environments. Its high strength (> 400 MPa) and thermal conductivity (> 100 W/m•K) make it a candidate for use in hypersonic fight, but a low fracture toughness (< 3 MPa•m^1/2) limits this use. In order to increase the fracture toughness without compromising the strength and thermal conductivity, experimental research has focused on the viability of engineered architectures using multiple materials to create a macrostructure. These architectures allow for the increase of fracture toughness thru crack deflection in the material.

Two architectures in particular, …

Influence Of Input Energy On Mechanical Properties Of Laser Powder Bed Fused Aisi 304l Stainless Steel, Tan Pan

Masters Theses

“Powder Bed Fusion process with selective laser melting technique is popularly adopted in additive manufacturing area on account of its layer by layer manufacturing fashion capable of fabricating components with complex internal and external geometries and structures. However, the process-property map is unique and vital for different materials and AM configurations used for fabrication. The process parameter is identified as a significant factor that heavily influences the properties and performances of the printed materials.

Current work aimed to extend the existing knowledge on Laser Powder Bed Fusion fabricated AISI 304L by accessing the influence of varying energy input on the …

Games For Organizational Training: Gamer Motivation Profile And Organizational Training Climate Effect Of Trainee Preference For Gamified Training, Brooke-Nicole Woods Ruffin

Masters Theses

“Gamified training is often utilized in organizations as a way to revamp their training and gain the attention of their employees. However, this training is expensive, and research is needed to help ensure that this training delivery is successful. In this study, first an individual’s gamer motivation profile is compared with learning outcomes that share the same elements. This was completed to determine if the elements that they looked for in playing video games were in alignment with those same elements in training In addition, it was explored whether the preference for participating in video games based on an individual’s …

Comparison Of Reynolds-Averaged Navier-Stokes Turbulence Models For Simulating Boundary Layers In Hypersonic Flows, Jorge-Valentino Kurose Bretzke

Masters Theses

“This study describes the use of Computational Fluid Dynamics (CFD) codes to simulate hypersonic boundary layers using several different turbulent closure models and comparing Reynolds-Averaged Navier-Stokes (RANS) simulations against Direct Numerical Simulations (DNS) of similar test cases. The test cases in this study consist of a flat plate in a Mach 8 freestream with a zero pressure gradient and wall recovery ratio of 0.48, as well as a Mach 8 axisymmetric nozzle also with a cold wall. The RANS models used in this study are the Spalart-Allmaras model, Baldwin-Lomax model, Menter K-Omega Baseline and Menter K-Omega Shear Stress Transport models. …

Determining Variable Depth To Bedrock Using Ert And Masw: A Geophysical Investigation In St. Louis, Mo, Justin James Clinton

Masters Theses

“The research involves a geophysical study in the Maremec River Valley in St. Louis County, Missouri. The geophysical methods described in this paper can provide a relatively quick, inexpensive, and accurate means in investigating the lithologic characteristics of the subsurface. Method selection is ultimately dependent of the type of investigation and site-specific characteristics. In this investigation, Electrical Resistivity Tomography (ERT) data and Mutli-Channel Analysis of Surface Waves (MASW) data were acquired to image the bedrock beneath the Maremec River to an approximate depth of 110 ft or an elevation of 300 ft for a proposed wastewater tunnel. Two overlapping dipole-dipole …

Characterization Of A Plasma Source Simulating Solar Wind Plasma In A Vacuum Chamber, Blake Anthony Folta

Masters Theses

"The United States has set an aggressive time line to not only return to the Moon, but also to establish a sustained human presence. In the Apollo missions dust was a significant factor, but the duration of those missions was short so dust and surface charging were problems, but they did not pose an immediate threat. For a long-term mission, these problems instead become incredibly detrimental. Because of this, research needs to be conducted to investigate these phenomena so that mitigation techniques can be developed and tested. To this end, this thesis serves to demonstrate the Gas and Plasma Dynamics …

The Role Of Tectonic Inheritance, Plate-Reorganization, And Magma Flare-Ups In The Evolution Of The Sevier Orogeny, J. Daniel Quick

Masters Theses

"The temporal and spatial distribution of strain associated with the Sevier Orogeny in western North America is significantly different in the southern end of the belt, at the latitude of Las Vegas, than further to the north at the latitude of Salt Lake City. Until this study, reasons for these differences were speculative as a lack of thrust kinematic data in the intervening region hindered along strike correlation across the belt. A crystallization age of 100.18 ± 14 0.04 Ma was determined for zircons extracted from a recently recognized ash fall tuff near the base of the synorogenic Iron Springs …

The Application Of Machine Learning Models In The Concussion Diagnosis Process, Sujit Subhash

Masters Theses

“Concussions represent a growing health concern and are challenging to diagnose and manage. Roughly four million concussions are diagnosed every year in the United States. Although research into the application of advanced metrics such as neuroimages and blood biomarkers has shown promise, they are yet to be implemented at a clinical level due to cost and reliability concerns. Therefore, concussion diagnosis is still reliant on clinical evaluations of symptoms, balance, and neurocognitive status and function. The lack of a universal threshold on these assessments makes the diagnosis process entirely reliant on a physician’s interpretation of these assessment scores. This study …

Link Between Energy Investment In Biosynthesis And Cellular Resistance To Oxidative Insult: Test The Cost-Quality Hypothesis In Insects, Taiwo Bolanle Iromini

Masters Theses

“The metabolic cost of growth is the amount of energy invested to fuel the anabolic biochemical reactions of biosynthesis. It has been implicated in the efficiency of farm animals and fishes, thus, increased economic profit. The metabolic cost of growth in the cockroach nymph was reported to be 20-fold higher than that of the painted lady butterfly caterpillar. The cost-quality hypothesis was proposed to explain the extremely low biosynthesis energy cost in painted lady caterpillar when physiological and ecological processes the metabolic growth cost was attributed to could not. In this study, the cost-quality hypothesis was tested.

Midgut cells were …

Performance Evaluation Of Alsi10mg Fabricated By A Selective Laser Melting Process, David Michael Murphy

Masters Theses

“Selective laser melting is becoming a widely used additive manufacturing technique that melts metal powder in a layer by layer process in order to build a desired part or geometry. Like many additive processes, selective laser melting allows for fabrication of parts with complex geometries. In order to fabricate a fully dense part there are a number of variables to take into account including: powder characteristics, laser parameters, and environmental parameters. Each of these variables can affect the microstructure and thus the mechanical performance of an additively manufactured part. In this work, the aluminum alloy AlSi10Mg was investigated. AlSi10Mg is …

Mineral Compositions Of Meteorite Samples Alha 77005, Nwa 7397, Nwa 5480, And Ausson: Implications For Geodynamic Processes On Their Parent Bodies And Meteorite Reclassification, Kaylin Agnata Tunnell

Masters Theses

“This study investigates the major, minor, and trace element compositions of minerals from a series of meteorites which represent different stages of planetary evolution including two sample from Mars (ALHA 77005 and NWA 7397), one sample from Vesta (NWA 5480), and one ordinary chondrite (Ausson). The goal of this study is to investigate if petrogenetic tracers commonly employed to understand terrestrial samples can also be applied to extraterrestrial samples. The data presented here show that mineral trace element data allow for novel insight into the magmatic history of meteorite samples. For example, V/Sc and Fe/Mn ratios in olivine provide insight …

Optical Fiber Based Integrity Test Of Civil Engineering Materials: Numerical Analysis, Ruoyu Zhong

Masters Theses

“Major advancement in Civil Engineering cannot be accomplished without the help of sensors. Among different types of sensors, fiber-optic sensor is known for its light weight, high accuracy, resolution, immunity to electromagnetic interference, and resistance to harsh environment. This research mainly focuses on fiber-optic sensor application on concrete structures as temperature sensor. Thermal Integrity Profiling (TIP) is a non-destructive integrity testing method which makes use of the hydration heat from the concrete curing process to detect defects within a drilled shaft. Any defect of concrete could result in a temperature anomaly in a drilled shaft. The accuracy of the current …

Additive Manufacturing Of Linear Shaped Charges To Address Run Up And Run Down Phenomena, Jason Ho

Masters Theses

”A shaped charge is an explosive device used to focus detonation energy in a desired direction. Additive Manufacturing (AM) can allow greater design freedom and geometric complexity for the liner portion of the shaped charge.

In this work, the following hypotheses were tested: 1) Adjusting the initial apex angle of a linear shaped charge liner reduces the amount of run up that occurs, and 2) implementing a backstop at the end of a linear shaped charge liner reduces the amount of run down that occurs.

Linear shaped charge liners with a continuously changing apex angle were created with additive manufacturing. …

Mid-Infrared Chiral Metsurface Coupling With Molecular Vibration, Md Shamim Mahmud

Masters Theses

“The mid-infrared design of chiral metamaterial shows a tremendous absorption capability of infrared rays, and it has the significant application of circular dichroism based device development. Plasmon-phonon coupling is one of the application of metamaterial that provides a new path for tailoring the surface in the nanoscale, which is also applicable in molecules detection. It is possible to change the Plasmon-Phonon coupling strength not only through the chemical change of molecules but also by changing the metamaterial light-matter interaction property. So far, linearly polarized light shows the strong coupling between metamaterial and molecules. However, it is possible to observe strong …

Feasibility Study On Novel Fire-Resistant Coating Materials, Anyou Zhu

Masters Theses

“Over the past decades, wildfires in the United States have caused severe damage and property losses. The California Camp Fire in November 2018 caused 85 civilian fatalities and destroyed 18,793 structures. There is a need to enhance the fire resistance of structures and buildings. The primary purpose of this study was to develop innovative surface-bonded fire-resistant material that can be used as a wall coating with three primary features: (a) workability for application, (b) enough adhesion to the surface of the structure, (c) fire-resistant. This research developed mix designs of innovative fire-resistant coating materials including high-performance cement mortar (HPCM), geopolymer …

Combining Laser Aided Ablation And Polishing To Minimize Surface Roughness Of Additively Manufactured Aluminium Components, Sahil Bipinkumar Patel

Masters Theses

“The surface roughness of additively manufactured parts is much higher than the acceptable range for most applications, thus post-processing is needed to qualify these parts for use. Laser polishing can be used to bring the surface roughness in an admissible range, but if the initial roughness is very high then the energy density for the polishing process needs to be very high to achieve a significant reduction in roughness. This high energy density can produce many process defects. Also, laser polishing alone cannot get rid of high wavelength asperities. Any waviness in the part can be linked with initial waviness …

Principles For Starting A Song-Writing Ministry, Carson Ka Siu Li

Masters Theses

With the approval of Dr. Keith Currie and Dr. David Schmal, I have chosen to complete the Music & Worship Ministry Project as the Final Thesis for the Masters of Art in Music and Worship. The objective of the project is to produce an Extended Play Record (EP) that contains five original worship songs written specifically for this EP. The components of this project include: songwriting, arranging, performing, recording, and producing. This project will achieve two purposes: first, the songs in this EP are meant to be sung in my local church – Koinonia Evangelical Church (KEC); second, this project …

The Resurrection Of Christ: A Bayesian Analysis Of Explanatory Hypotheses, Nicola Jérôme Liebi

Masters Theses

The goal of this thesis is to determine under which circumstances a supernatural hypothesis should be preferred over the most probable natural hypothesis to explain a set of historical facts. The supernatural hypotheses include the objective vision hypothesis and the resurrection hypothesis, while the subjective vision hypothesis is taken to be the most probable natural hypothesis. Each of them can be found in the recent literature on the Resurrection and is still advocated by major proponents. The facts by which these three hypotheses are judged are agreed upon by most scholars. They include (1) Jesus’ death by crucifixion, (2) the …

Investigation Of Glutamate Carboxypeptidase Ii Roles In The Folate Cycle Dependent Reproduction And Development Of Caenorhabditis Elegans, Jessica M. Derham

Masters Theses

Glutamate Carboxypeptidase II (GCPII) is a transmembrane, zinc metallopeptidase that is expressed in a wide range of organisms, including roundworms, mice, and humans. In humans, GCPII is primarily expressed in the prostate, kidneys, small intestine, and central nervous system. Within the small intestine, the expected function of GCPII is to aid in the absorption of dietary folate from the intestinal lumen. GCPII cleaves excess glutamates from folate to yield monoglutamated folate which is then readily transported into the enterocyte. Folate can then be used through the one carbon metabolic cycle for the synthesis of nucleotides, conversion of homocysteine to methionine, …

Design, Synthesis, And Characterization Of Chemical Tools To Study Peroxisomal Import, Jhalak N. Timilsena

Masters Theses

Peroxisomes are dynamic and interconnected single lipid membrane bound organelles found in the eukaryotic cells which are involved in various biochemical processes including the b-oxidation of very long chain and branched chain fatty acids, metabolism of reactive oxygen and nitrogen species, and reduction of hydrogen peroxide among others. These organelles are known to host numerous proteins and enzymes depending on the cellular environment. All of the proteins needed in the peroxisomes are encoded in the nucleus and synthesized in the cytosol which are then transported to the peroxisomes with the help of a sophisticated protein-transport machinery. Pex5 is one of …

Reprograming Neuronal Cells By Overexpression Of Fibroblast-Specific Transcription Factors, Abdulmohsen Alanazi

Masters Theses

In mammals, a complex system of regulatory signals distinguishes tissues, structures and functions. Combinations of transcription factors and co-factors regulate activation and repression of genes that result in cellular differentiation. Whole genome arrays allow the monitoring of genomic expression in specific tissues. Fibroblast microarray studies have shown candidate genes that may be involved in fibroblast identification, including genes that express transcription factors Prrx1, Snai2 and Twist1. A previous study showed that the Prrx1 and Snai2 could reactivate a fibroblast phenotype in hybrid cells that had lost fibroblast identity. Furthermore, overexpression of these factors in liver-derived cells strongly repressed liver gene …

Nest Success In A Grassland Bird Community: Microsite Selection & A Case For Nest Height Manipulation, Matt Kneitel

Masters Theses

Grassland birds are a sensitive community and populations around the country have been declining. They are susceptible to low nest success due to loss of habitat and the small, fragmented patches that remain are often subjected to elevated levels of nest predation. The American goldfinch (Spinus tristis), which uses grasslands for feeding and nesting, is understudied given its abundance, due in part to its late-season nesting habits, and selection of taller woody vegetation as nesting substrate, which is atypical for many grassland nesting birds. American goldfinches were incorporated in this study which included nest height manipulation of goldfinch …

The Transitional Experiences Of International Students Studying In The United States, Philip Fennell

Masters Theses

This study sought to explore the real-life experiences of two international students and the impact on their transition to a United States college. A narrative qualitative approach was used to incorporate the stories of international students as shared by their own words. Their stories were used to identify similarities and differences including resources they utilized and their interactions with others. International students all share different cultural backgrounds and characteristics. Nonetheless, they will each have their own unique experiences, as well as have different ways of reacting and responding to those experiences. We must put in the effort of listening to …

Seasonal Temperature Changes In Three Midwestern Wastewater Streams And The Effects On Fish Assemblages And Physiology, Ryan William Sparks

Masters Theses

Midwestern United States undergo extreme temperature and precipitation fluctuations throughout the year, which leads to changing habitats within Illinois river systems. Wastewater treatment facilities have long been used to treat sewage and reduce the organic products in sewage before releasing it into aquatic environments. Wastewater treatment facilities must maintain optimal conditions, especially temperature, for reproduction and growth of facilitated bacteria that break down organic materials in wastewater. The objectives for this study were to determine the thermal effects of wastewater treatment facilities on receiving waters; and secondly, to investigate the influence of these wastewater facilities on fish abundance and assemblages. …

The Determinants Of Sectoral Employment In Nepal, Thaman P. Bastola

Masters Theses

This paper uses the data from 1991 to 2019 to analyze the determinants of employment in agriculture, industrial, and service sectors of Nepal. The data are gotten from the world development indicators (WDI), human development indicators (HDI) and Nepal Rastra Bank (NRB). The results show that significant determinants of employment in Nepal areeducation, health, population growth, interest rate, inflation rate and political conflict.The education, health, population growth, and inflation are inversely related to the employment of agricultural sectors employment. Likewise, the industrial sector employment is positively affected by the health and political conflict, and negatively affected by the level of …

Representations Of Africa In Us Media: A Semiotic Analysis Of Ebola: The Doctor’S Story And Body Team 12, Olubusola Akinpelu

Masters Theses

The Western media has often been criticized for biased coverage of happenings in and around Africa. The 2014 Ebola outbreak created a lot of media attention for West Africa, and by extension, the entire continent. This study examined to what extent postcolonial discourses were infused in two films from the HBO Trilogy: Ebola: The Doctor’s Story (2015) and Body Team 12 (2015). To analyze these texts, I took a semiotic approach by identifying, describing and interpreting the signs in both films, to discuss the postcolonial discourses in three broad themes. Ebola: The Doctor’s Story (2015) was analyzed in the …

Adjustment To Life In America: Black African Graduate Level Students, Denver Daniels

Masters Theses

The purpose of the study was to examine what challenges Black African graduate students face when adjusting to life in the United States. A secondary concern was to examine what coping strategies were used during the transition. A qualitative approach was used to interview the participants and through coding, develop themes related to their time as graduate students.

This study concluded that there were a number of issues that Black African graduate students face. The students reported that they experienced homesickness, culture shock, and discrimination during their time at school. Specific themes also emerged as to how they coped with …