Digital Commons Network^™

A Numerical Study Of Van Der Pol's Nonlinear Differential Equation For Various Values Of The Parameter E., Charles C. Limbaugh

Masters Theses

"This paper briefly reviews the geometric concepts associated with nonlinear differential equations and then proceeds to a study of the homogeneous van der Pol equation. After studying the method of Kryloff and Bogoliuboff for small values of the parameter €, the author makes a numerical study of the equation using Hamrning's Method for the numerical solution. Several trajectories and the phase plane are shown for E = 0.1, 1.0, and 5.0. The author then studies one of the analytic theories, i.e., the method of Cartwright and Littlewood, and indicates some of the other analyses for large €"--Abstract, p. ii

Investigation Of Inoculant Effect On Cast Iron, Darrell W. Donis

Masters Theses

"An assumption was made that extensive holding time of an inoculated gray iron melt would result in a loss of physical properties of castings poured from this melt. This theory was examined in both a literature search and by testing and conclusions drawn from these findings are presented and discussed. Although there is a great deal of data available which discusses inoculants and their effects, very little mention is made of the effect of holding time in any of this material. The results indicate that holding time is of considerable importance when dealing with inoculated iron, and that calcium silicon …

Ignition Time Lag: A Measure Of Explosive Energy Release, Paul H. Rydlund

Masters Theses

"By means of the resistance-element, or probe-wire, detonation-velocity measurement technique, explosive reactions from various blasting agents were studied. To reduce the number of variables, only standard AN-FO 94/6 mixtures were used, as are commonly employed today in constructions and mining operations. Accuracy of the data obtained was excellent, and the method proved itself not only relatively simple to operate but versatile in providing considerable information under many testing conditions. Studies of test records revealed the presence of a time-lag frequently occuring [sic] after primer detonation. Environmental factors such as confinement, charge diameter, primer size and energy content, and surface coatings …

Structural And Magnetic Characteristics Of The Belton Anomaly, Cass County, Missouri, Nagib Chamon

Masters Theses

"A vertical intensity magnetic survey of approximately 156 square miles in Cass County, central-west Missouri, revealed a broad circular anomaly whose magnetic relief exceeds 1000 gammas. Surface rocks are very gently inclined and are of Pennsylvanian age. Crystalline basement rocks are at a depth of approximately 2400 feet. Analysis of the data shows that the Belton anomaly consists of discontinuous smaller magnetic anomalies surrounding the central part of this broad anomaly. The central area of the Belton anomaly is occupied by a magnetic low. Analytical calculation showed that the source of the magnetic disturbance is at least 3650 feet below …

A Comparison Of The High School Preparation Of 1956 Freshmen And 1962 Freshmen At Eastern Illinois University, Donn W. Hammer

Masters Theses

No abstract provided by author.

The Power Mechanics Program In The Junior High Schools Of Illinois, Lee M. Sellers

Masters Theses

No abstract provided by author.

The Effect Of A Lubricant On Tool-Workpiece Interface., Kenneth Eugene Spencer

Masters Theses

"The purpose of this study was to compare the effects of cutting fluids and the method of application to an orthogonal cutting process.

The cutting operation was performed on a lathe. The fluids use d were compressed air and a solution of emulsifiable oil and water.

The flooding of the area was produced by directing a copious supply of fluid over the cutting a rea. The directed stream was obtained by pumping the fluid through a small hole drilled into the tool holder, immediately above and behind the tool face, which directed the fluid at the tool-chip interface.

The results …

On A Numerical Solution Of Dirichlet Type Problems With Singularity On The Boundary., Randall Loran Yoakum

Masters Theses

No abstract provided.

Real Time Testing With A Time Scaled Analog Computer., Wayne F. Balsman

Masters Theses

"A present limitation to the testing of a physical subsystem within an analog simulation is that the analog computer must compute in real time. If it is necessary to time scale the simulation of the complete system, a physical subsystem of the complete subsystem may not be tested within the simulation. Therefore, a means of changing the time scale of the analog signal is needed to test a physical subsystem within a time scaled analog computer simulation.

In this thesis a means of time conversion by sampling the analog signal at one rate, storing the samples, and reading the samples …

A Study Of The Effect Of The Crystal Orientation On The Internal Friction Of Magnesium Single Crystals., Robert Ray Nothdurft

Masters Theses

"The method of growing, etching, and cutting magnesium single crystals is described in some detail. Ten single crystals of magnesium of different orientations were prepared and studied. The internal friction and relative Young’s modulus were measured for each specimen as a function of applied stress on a quartz composite oscillator. The effect of the orientation on the strain amplitude independent decrement, the strain amplitude dependent decrement and the ratio of the strain amplitude dependent decrement to the relative Young's modulus is compared to the theory of the pinned dislocation model of Granato and Lücke"--Abstract, p. ii

Thermal Resistance Of Bonds And Contacts, David Marion Lewis

Masters Theses

"The adhesive and sealant Industry has more than kept pace with our rapidly expanding technology of today. This growth has left the standardization of data on adhesives far behind and lack of this data is obvious. Of the many applications, particularly as related to space technology and energy conversion, the resistance to the flow of heat offered by the bond layer is of considerable importance.

Little information is available on the effect of adhesives on heat transfer. In connection with their work on honeycomb panels, Rankle, Gier, and Bevans (7) determined the thermal resistance of the particular type of adhesives …

Analysis Of Space Frames By Moment Distribution., Ting-Hwa Wang

Masters Theses

"This work presents an analysis of space frames and planar frames loaded in different planes by the method of moment distribution and the theory of superposition. From this analysis it is found that the torsional stiffness of frame members has a great effect on the final bending moments when twisting moments are applied to the frame. The analysis of space frames considering the forces, stresses, and moments in all three dimensions always yields a design more accurate and economical in material than the traditional planar frame analysis"--Abstract, p. i

The Effect Of Moisture Content On The Action Of Sea Coal In Molding Sands., Robert J. Endres

Masters Theses

"An assumption was made that an increase in moisture content in the sand would result in an increase in the amount of volatile matter retained in a sand, clay, water, and sea coal mixture which had been subjected to the heat of molten iron. Because of a lack of positive evidence to support this assumption, it was concluded that the volatile matter retained within the sample is independent of the moisture content.

It was also shown that the volatile products do not travel back through the sand, away from the mold-metal interface. Rather, the volatiles escape from the sand and …

Design, Construction And Characterization Of A 10-Liter Batch Pilot Plant Fermentor., Sylvester Ogden

Masters Theses

"A 10-liter batch type pilot plant fermentor has been designed and constructed. The design incorporated most of the desirable features of previous designs reported in the literature.

The stainless steel fermentor has a multi-speed agitator and aeration rates as high as 15 cubic feet per hour. Temperature indicating, temperature controlling, pH measuring, and automatic foam controlling systems are included in the design.

Sulfite oxidation rates have been determined for the unit at 15 operating conditions. A maximum sulfite oxidation rate of 1060 millimoles of oxygen per liter per hour has been obtained.

Fermentation using a Torulopsis utilis yeast culture has …

A Preliminary Study Of The Controlled Crystallization Of A Bottle Glass., Narayan M. Sedalia

Masters Theses

The effect of addition of Ti0₂ as a nucleating agent was studied with a bottle glass composition of 74 weight percent Si0₂, l percent Al₂O₃, 5.4 percent Cao, 3.7 percent MgO, 15. 3 percent Na₂O, and 0.6 percent K₂O as a base or original composition. The addition of titanium dioxide ii varied from 3 to 20 weight percent. The composition of this bottle glass was changed by increasing the following ingredients and keeping the other ingredients in the same ratios:

1. Increased 5 weight percent of Al₂O …

Compensator Design For Unity Feedback Systems Using An Analytical Method, Chang-Yu Wu

Masters Theses

“In control systems engineering it is frequently necessary to compensate a fixed plant whose transfer function cannot be changed. Usually the characteristics of the resulting system are established in terms of steady-state and transient performance specifications. Generally it is necessary to insert a compensator which insures stability as well as satisfies the specifications.

In this thesis an analytical method is developed to determine the transfer function of the compensator in order to satisfy the following set of specifications. The fixed system is assumed to contain one non-linearity, saturation. The input to the saturable device is constrained in a statistical …

A Study Of Cation Exchange And Soil Properties, Arthur G. Follett

Masters Theses

“The objective of this investigation is to study the effect of clay content and cation exchange capacity on the liquid and plastic limits of a soil system in the natural, flocculated, and dispersed states. Putnam and Clarksville natural soils found extensively in Missouri and a synthetic soil composed of Kaolin clay and Clarksville fine sand and silt were tested.

The results of the investigation indicate that a general relationship exists between the high cation exchange capacity of a soil and the extreme variances of the liquid and plastic limit values for the flocculated and the dispersed states. The cation exchange …

Influence Of The Heat Release On Thermodynamic Characteristics Of Diesel Engines., Shirish Amritlal Desai

Masters Theses

"A Diesel. engine is an internal. combustion engine in which the fuel. is ignited by the heat of compression. Thus, the Diesel. engines are known as compression-ignition (C.I.) engines. The engine received its name: from its inventor, Dr. Rudolf Diesel., who in 1893 published a book under the title, '' Theory and Construction 0£ Rational. Diesel Engine". The first successf'u1 Diesel. engines, using liquid: fuel., which was injected into the cylinder by a blast of high-pressure air, were manufactured by the M.A.N. Company of Germany in 1895"-- Introduction, p. 1

Development Of A Fluor-Mica Dielectric Using Glass-Ceramic Fabrication Methods., James Joseph Tuzzeo

Masters Theses

"A tetrasilicic fluor-mica, K₂Mg₅si₈o₂₀F₄, was synthesized using glass-ceramic fabrication methods. Bubbles, rods, and disks of glass-mica were formed, and heat treated at selected temperatures between 620°c and 1160°c for various time periods. Density changes were correlated to mica content to determine the relative amounts of crystalline mica phase precipitated after heat treatment. Dielectric losses and dielectric constants of the glass-mica disks were measured for correlation to mica content"--Abstract, p/ ii

The Effect Of Matrix Condition In The Solution Of A System Of Linear Algebraic Equations., Herbert R. Alcorn

Masters Theses

"The solution of a system of linear non-homogeneous equations may contain errors which originate from many sources. A system of linear equations in which small changes in the coefficients cause large changes in the solution is unstable and the coefficient matrix is ill- conditioned .

The purpose of this study is to define several measures of matrix condition and to test them by correlation with a measure of the actual errors introduced into a system of equations.

The study indicates that three of the five measures of condition tested were reliable indices of the magnitude of error to expect in …

A Parameter Perturbation Procedure For Obtaining A Solution To Systems Of Nonlinear Equations., James Carlton Helm

Masters Theses

"For simultaneous nonlinear equations the convergence of the known functional iterative procedures is dependent upon a good initial approximation to the desired roots. In this paper the restriction on the choice of the initial approximation has been circumvented by dividing each problem into a number of subsidiary problems in accordance with a parameter perturbation procedure. The study presents a discussion of the algorithm and the conditions for convergence. The discussion, also, includes the problems which were solved using the parameter perturbation procedure"--Abstract, p. ii

Experimental Evaluation Of Thermal Stresses On The Outer Surface Of A Thick-Walled Tube., Vinodray T. Patel

Masters Theses

"In this investigation an attempt has been made to measure thermal stresses on the outer surface of a thick- walled tube. The inside surface was heated by steam passing through the tube while the outer surface was cooled by water. Two temperature compensated strain gages were used to measure strains in the tangential and axial directions respectively. The advantage of using this type of strain gage is to avoid the use of a dummy gage to compensate for the temperature effect.

The analytical solution to the problem was derived and the values of thermal stresses were calculated theoretically and compared …

Separation Of Cationic And Colloidal Fractions Of Radioactive Fission Elements By Electrodialysis., Ronald Dean Mitchell

Masters Theses

"The rapid increase in radioisotope applicat i ons necessitates improved technology for separation and purification of the fission product elements. Electrodialysis techniques employing Permutit anion exchange membranes (3148) and cation exchange membranes (3142) were used to separate strontium from cesium and to fractionate cerium from promethium. The methods were based upon organic complex formations in basic solution.

Separations of radio strontium and radio cesium were affected with both anion and cation exchange membranes in a three-cell electro dialyzer with EDTA as a chelating agent at a pH of 11.0o Fractionation of radiocerium and radio promethium were affected with anion exchange …

The Electrical Analogy Of Critical Speed For The Transverse Vibrations Of A Shaft With One, Two And Three Masses, Ashok Z. Patel

Masters Theses

"The object of this thesis is to determine the critical speed of a shaft by an electrical analogy. The shaft considered is of constant diameter and is simply supported at the ends by fixing it in self aligning bearings. The weight of the shaft is assumed to be proportionally distributed in the attached masses.

The original system is first of all converted to an equivalent simple spiring mass system by calculating the influence coefficients and hence frcan these determining the spring constants. The spring mass system obtained is then converted to an equivalent electrical circuit.

A sine-square wave frequency generator …

The Effect Of The Static Compaction On The Mechanical And Physical Properties Of Asphalt Concrete Hot-Mixes, Abdel-Gawad A. Bahgat

Masters Theses

"The objective of this investigation was to study the effect of the static compaction effort upon the physical and mechanical properties of asphalt concrete hot mixes. To study the effect of the static compaction upon the physical properties of the asphalt mixes, six mixes were prepared using hard, well graded crushed limestone as an aggregate, blended with an 85-100 penetration grade asphalt cement. The control mix was prepared and tested in accordance with the Marshall method for mix design. The other five mixes were prepared and tested using the same procedures of Marshall except for compaction, where five different static …

A Study Of The Crystallographic Orientation Dependence Of Electrical Resistivity In Zinc, Paul Frederic Becher

Masters Theses

"A potentiometer and galvanometer setup was used to obtain electrical resistivity data for polycrystalline zinc. Cold working textures were investigated by the reflection technique with a quadrant x-ray spectrometer.

Resistivity data were obtained for specimens that were reduced up to forty per cent from the as received condition, and the corresponding textures were studied. The results indicated that the resistivity change in the rolling direction is due to the reorientation of the c-axis in the rolling caused by cold working"--Abstract, page ii.

The Submerged Culture Of Thiobacillus Thio-Oxidans In A Pilot Scale Fermentor, Edward Hibbert Crum

Masters Theses

"A strain of Thiobaci.llus thiooxidans was isolated from a West Virginia coal mine drainage. This strain was characterized by its production of sulfuric acid in shake flasks. The strain was also compared with a pure culture of h thiooxidans obtained from the American Type Culture Collection (ATCC number 8085).

The strain was grown in submerged culture in a 16-liter pilot scale fermenter. Two aeration systems, air and air enriched with carbon dioxide, were examined. The air enriched with carbon dioxide gave a much more rapid growth rate. The culture reached the mid-log phase of growth after 80 hours of incubation …

The Anodic Dissolution Of Zinc In Nitrate Solution., Jo Lisle Reed

Masters Theses

"The increasing demand for protective metals as coatings and non-corrosive alloys has stimulated extensive research on the fundamental behavior of metals in corrosive media.

One of the problems still unsolved is the nature of the mechanism of the anodic dissolution of metals like zinc, magnesium, beryllium, cadmium, and aluminum in aqueous salt solutions. Several schools of investigators have proposed different and opposing theories to explain the discrepancies which often arise between coulometric data and the weight loss of metal electrodes in certain salt solutions.

The purpose of this investigation was to obtain experimental data for the anodic dissolution of zinc …

Study Of The Temperature Dependence Of The Haeffner Effect In Mercury, Charles George Arnold

Masters Theses

“In 1953, E. Haeffner (1) reported that after he had passed a direct electric current through a capillary tube filled with mercury, he obtained a separation of the isotopes of mercury. It was found that the heavier isotopes were enriched at the negative terminal and the lighter Isotopes at the positive terminal. This effect has since been referred to as the Haeffner Effect. Since this original experiment, other investigators have observed this effect in many other liquid and some solid metal systems.

The work of J. N. Baysden (2) showed that the separation of the isotopes in mercury could be …

Correlation Of Chemical Structure And Distensibility Of Polyesters., Nitin Jhaverbhai Bhimani

Masters Theses

"Maleic anhydride and fumaric acid are important raw materials for the manufacture of unsaturated polyesters. Unsaturated polyesters are the esterification products of unsaturated dibasic acids and polyvalent alcohols, polymerized to a high molecular weight resin"--Introduction, p. 1