Digital Commons Network^™

Developing An Energy Efficient Real-Time System, Aamir Aarif Khan

Masters Theses

"Increasing number of battery operated devices creates a need for energy-efficient real-time operating system for such devices. Designing a truly energy-efficient system is a multi-staged effort; this thesis consists of three main tasks that address different aspects of energy efficiency of a real-time system (RTS).

The first chapter introduces an energy-efficient algorithm that alternates processor frequency using DVFS to schedule tasks on cores. Speed profiles is calculated for every task that gives information about how long a task would run for and at what processor speed. We pair tasks with similar speed profiles to give us a resultant merged speed …

Computational Investigation Of Polymer Electrolyte Membrane Fuel Cell With Nature-Inspired Fibonacci Spiral Flow Field, Suleyman Kose

Masters Theses

"Polymer electrolyte membrane fuel cells (PEMFC) are promising clean energy devices. The flow field design has crucial role in PEMFC performance for effective distribution of reactants and removal of products. Several nature-inspired flow field designs have recently been proposed in the literature. Common characteristics of these designs were sudden changes in the flow direction through sharp bends and flow field geometries restrained to areas having corners. In this thesis, Fibonacci spiral configuration, which is found in the nature from hurricanes to seashells, was considered for flow field pattern of a PEMFC. Contrary to the bio-inspired designs proposed in previous studies, …

Effects Of Terrain-Based Altimetry On Navigation Performance, Kenneth Michael Kratzer

Masters Theses

"Navigation filters used during an entry, descent, and landing scenario often receive measurements related to the terrain over which the vehicle is traversing. Models of the terrain can be presented in varying degrees of fidelity, providing increasingly realistic and accurate models of the surface. While it is ideal to provide the filter with the most realistic model possible, the performance is limited by the strict nature of the real time scenario. Therefore, it is of interest to determine what level of fidelity is necessary to achieve an accurate filtering solution. Determining how best to incorporate terrain-related data into navigation solutions …

Analyzing Sensor Based Human Activity Data Using Time Series Segmentation To Determine Sleep Duration, Yogesh Deepak Lad

Masters Theses

"Sleep is the most important thing to rest our brain and body. A lack of sleep has adverse effects on overall personal health and may lead to a variety of health disorders. According to Data from the Center for disease control and prevention in the United States of America, there is a formidable increase in the number of people suffering from sleep disorders like insomnia, sleep apnea, hypersomnia and many more. Sleep disorders can be avoided by assessing an individual's activity over a period of time to determine the sleep pattern and duration. The sleep pattern and duration can be …

Lyapunov Stability Analysis Of Switched Microgrid Systems, Bokang Zhou

Masters Theses

"In this thesis, a Lyapunov-based method for analyzing the stability of a switched microgrid system is proposed. First, a small second-order system is explored as example to demonstrate the effectiveness of switching patterns on the stability of a system switching among different respectively stable operating points. Lyapunov function is employed in order to determine the proper state-based switching conditions under which global stability is guaranteed, or under which the system is driven unstable. Then, a linearized statespace model of a looped seven-node microgrid is established. Solid-state transformers (SSTs), distributed energy storage devices and synchronous generators are introduced and modeled in …

Quantifying On-Orbit Performance Of Cubesat Micropropulsion Systems By Observing Orbital Element Variations, Bradyn William Morton

Masters Theses

"The Advanced Propulsion Experiment mission in development by the Missouri University of Science and Technology's satellite research team (M-SAT) is a technology demonstration mission of a multi-mode propulsion system. The true test of any satellite propulsion system is the on-orbit performance. The purpose of this research is to develop methods for quantifying the on-orbit performance of the multi-mode propulsion system. This performance can be determined by observing the small variations in the orbital element parameters and using a differential corrector with the Gauss Variation of Parameter equations. Furthermore, this research could be used to determine and quantify a propulsion system's …

Research And Development Of Optically Transparent Join With Low Processing Temperatures, Eric Kevin Muskovin

Masters Theses

The purpose of this study was to investigate durable solar cell cover glass joins produced by diffusion bonding with deep eutectic solvents (DES) and to develop a novel process of joining optically transparent materials at low temperatures. A joined PV cell-glass specimen was characterized using Raman, μ-FTIR, SEM-EDS, and thin-film XRD. DESs were created with malonic acid (MAL) and choline chloride (ChCl) of varying composition factors (CF; CF=MAL/ChCl). Joining borosilicate glass coupons was attempted using DESs with CF = 0.65 and 1 at temperatures between 100-150 °C for 20 hours. Joining the glass coupons failed at all temperatures and oxygen …

Modeling And Control Of Three-Phase Grid-Connected Pv Inverters In The Presence Of Grid Faults, Paresh Vinubhai Patel

Masters Theses

"A two-stage photovoltaic grid-connected microgrid modeling approach is presented in this work. The purpose of the modeling is the behavior study of the microgrid during the low-voltage event on the grid. A complete mathematical model is discussed for each component of the system. The MPPT of the photovoltaic system is integrated with the boost controller to inject the constant current in the DC-link. The boost converter and the inverter control is implemented using the cascaded PI control. A dual second-order generalized integrator (DSOGI) method is implemented for the sequence extraction. The inverter controller is designed to meet the grid-code requirement …

Customized Multi-Group Cross Section Generation With Njoy For Discrete Ordinates Computed Tomography And Radiography Simulation, Steven Michael Wagstaff

Masters Theses

"The purpose of this work was to explore the creation of photoatomic multi-group cross section libraries to be used with a software package DOCTORS (Discrete Ordinates Computed TOmography and Radiography Simulator). This software solves the linear Boltzmann equation using the discrete ordinates method [1]. To create these libraries, NJOY2016 was used, creating both fine and broad energy multi-group cross section files. The cross section's accuracy was tested against an equivalent Monte Carlo simulation using MCNP6.

Two simulation geometries were used. The first, a cylindrical water phantom with a single source projection placed in front, simulating an X-ray radiography. The second …

Designed Extrudate For Ceramic Additive Manufacturing, Devin Mcmillen

Masters Theses

"The objective of this thesis work was to design ceramic paste systems that assist in achieving a high theoretical density ( > 95%) after deposition by a novel additive manufacturing process, i.e. Ceramic On-Demand Extrusion (CODE). The work is encompassed in five main sections: Sections 1 and 2 provide an introduction and literature review of relevant topics for the following sections of experimentation. Section 3 provides an analysis of a reaction chemistry to identify three discrete materials that could be combined via CODE and result in zirconium diboride (ZrB₂) post-sintering. Section 4 describes the development of a high solids …

Bridge Deck Assessment Using Visual Inspection, Ground Penetrating Radar, Portable Seismic Property Analyzer-Ultrasonic Surface Wave, Hammer Sounding And Chain Drag, Abdullah Hadi Zaid Alhaj

Masters Theses

"Integrated non-destructive techniques were utilized to assess the condition of a reinforced concrete bridge deck. There were two main objectives accomplished.

The first objective was to assess the integrity of the reinforced concrete bridge deck using four non-destructive techniques, namely visual inspection, ground penetrating radar, portable seismic property analyzer-ultrasonic surface wave, and hammer sounding and chain drag. Visual inspection data were used to identify signs of deterioration on surface of the bridge deck such as cracking, concrete leaching, and reinforcement corrosion. Ground penetrating radar data were used to determine the relative condition of the bridge deck. However, due to the …

The Development Of A New Formulation Of Fly Ash Class C Based Geopolymer And Assessing Its Performance In Presence Of Drilling Fluid Contamination, Mohamed Saad Ahdaya

Masters Theses

"Cementing is one of the most critical steps in the drilling and completion of oil wells. Traditionally, Portland cement is used for oil cementing operations; however, geopolymer materials have recently attracted much attention because they are more cost-effective and have less environmental impacts.

An intensive laboratory work was conducted to obtain a new formulation of fly ash class C based geopolymer cement to be used as a potential alternative cementing material to Portland cement in oil and gas cementing. Twenty-four variations of fly ash class C based geopolymers were prepared, and by comparing several of their properties using API standard …

Developing Computational Models For Pulsed-Inductive Plasma Formation, Zachary Aaron Gill

Masters Theses

"Pulsed-inductive discharges are a common method of producing a plasma. They provide a mechanism for quickly and efficiently generating a large volume of plasma for rapid use and are seen in applications including propulsion, fusion power, and high-power lasers. However, some common designs see a delayed response time due to the plasma forming when the magnitude of the magnetic field in the device is at a minimum. New designs are difficult to evaluate due to the amount of time needed to construct a new geometry and the high monetary cost of changing the power generation circuit. To more quickly evaluate …

Developing A Methodology For Estimating The Growth Of Radiated Emission From Multi-Modular Systems, Kaustav Ghosh

Masters Theses

"The large multiscale problems are commonly faced in real-world applications such as analysis of electromagnetic interference for a printed circuit board installed on a large platform with connected cables, wires and other high speed interfaces. EMI problems are not uncommon in high speed systems which involve multiple modules of complex hardware. As the system clock frequency and data rate increases, so does the challenges in controlling the EMI in such systems. The costs to prototype and to develop networking equipment are growing as a result of increasing complexities and densities. EMC regulations require radiated emission testing to be done in …

New Nanoparticle Water-Based Drilling Fluid Formulation With Enhanced Thermal Stability And Inhibition Capabilities In The Woodford Shale, Jose Aramendiz Pacheco

Masters Theses

"Drilling fluid design for unconventional reservoirs aims at preventing formation instability problems associated with fluid invasion, shale swelling, and cuttings dispersion. Although oil-based mud (OBM) can be used to achieve these goals, environmental and economic concerns limit its application. This experimental study evaluated the potential use of nanoparticles (NP) to improve water-based mud (WBM) inhibition capabilities and its ability to enhance the overall drilling fluid thermal stability while providing a cleaner technology to the industry.

Characterization of Woodford shale was completed with X-ray diffraction, cation exchange capacity, and scanning electron microscopy, silica, and graphene NP were characterized with aqueous stability …

Field Implementation Of Cement-Based Composite Strengthening Technologies, Michael Andrew Janke

Masters Theses

"With infrastructure continuing to age, technologies are being developed to strengthen structures as a more sustainable option than replacement. The use of fiber-reinforced cementitious matrix (FRCM) strengthening systems is a promising new technology for adding flexural and shear capacity to existing reinforced concrete members. While cement based systems with carbon, PBO, and steel have all been implemented in a lab setting, there is not research data available for installation in the field. FRCM composites have advantages over more widely used fiber reinforced polymer (FRP) composites such as heat resistance and compatibility with concrete substrate. FRP systems have previously been field …

Compressive Behavior Of Masonry Columns Confined With Steel Reinforced Grout (Srg) Composite, Sarah Elizabeth Jemison

Masters Theses

"In this study, a new type of composite comprised of steel fiber cords embedded in a natural hydraulic lime mortar matrix, known as steel reinforced grout (SRG), is explored for the use in confinement of masonry columns. An experimental study was carried out to understand the behavior of solid clay brick masonry columns confined by SRG jackets. Twenty-four confined and seven unconfined columns with a square cross-section were tested to failure under a monotonic concentric compressive load. Test parameters considered were the column corner condition, number of fiber jacket layers, and number of fiber overlapping faces. SRG confinement improved the …

Effect Of Microstructural Features On Steel Machinability, Mark C. Emmendorfer

Masters Theses

Non-metallic inclusions can have a tremendous impact on the machinability of steel. Some oxide inclusions such as alumina, spinel, and other refractory abrasive oxide inclusions can have a detrimental effect on machinability. Modification of oxide inclusions by calcium treatment can promote the formation of low melting point oxides such as anorthite and gehlenite inclusions that can assist in chip formation and form a lubricating layer on the rake surface of the machine tool. MnS is known to be beneficial to improving the machinability of steel. They assist in chip formation by being heavily deformed in the primary shear zone. Sulfide …

Application Of Seismic Attributes For 3-D Seismic Visualization Contributed In Structural And Stratigraphic Interpretation Of The Tangahoe And Farewell Formations In The Kupe Field, Taranaki Basin, New Zealand, Housam Hussein Grabeel

Masters Theses

"Taranaki Basin is a mainly offshore basin covering an area of approximately 100,000 km², elongated across the western margin of New Zealand's north island. However, the modern limit of the basin is extended toward the deep water to cover about 330,000 km². The basin is divided by tectonic activities into northern and southern grabens. The southern region has become the most extensively researched district in recent years as its prime lithology and structural trap distributions provide numerous hydrocarbon fields. One such field is the Kupe Field (256 km²), which lies on a northerly-plunging, reverse-faulted, …

Smart Augmented Reality Instructional System For Mechanical Assembly, Ze-Hao Lai

Masters Theses

"Quality and efficiency are pivotal indicators of a manufacturing company. Many companies are suffering from shortage of experienced workers across the production line to perform complex assembly tasks such as assembly of an aircraft engine. This could lead to a significant financial loss. In order to further reduce time and error in an assembly, a smart system consisting of multi-modal Augmented Reality (AR) instructions with the support of a deep learning network for tool detection is introduced. The multi-modal smart AR is designed to provide on-site information including various visual renderings with a fine-tuned Region-based Convolutional Neural Network, which is …

Practical Dwell Times For Switched System Stability With Smart Grid Application, William Roy St. Pierre

Masters Theses

"Switched systems are encountered throughout many engineering disciplines, but confirming their stability is a challenging task. Even if each subsystem is asymptotically stable, certain switching sequences may exist that drive the overall system states into unacceptable regions. This thesis contains a process that grants stability under switching to switched systems with multiple operating points. The method linearizes a switched system about its distinct operating points, and employs multiple Lyapunov functions to produce modal dwell times that yield stability. This approach prioritizes practicality and is designed to be useful for large systems with many states and subsystems due to its ease …

Investigation Of Proppant Static Settling Velocity In Hydraulic Fractures Using Viscoelastic Linear Gel, Vismay Manishbhai Shah

Masters Theses

"Few studies have quantified proppant transport in static conditions using actual proppant and validated previously established correlation. The objective of this study is to investigate the rheological properties of the linear gel, and determine the effect of size, shape and specific gravity of the proppant, fracture walls and rheological properties of the fluid on the proppant settling velocity in static condition and validate the previously established correlation.

Shear viscosity and dynamic frequency sweep tests were performed to investigate the viscous and viscoelastic behaviour of the HPG linear gel with five different concentrations. Proppant settling experiments were conducted with different proppant …

An Investigation Into The Effects Of Ion Tracks On Α-Quartz, Bryant Alan Kanies

Masters Theses

"The passage of a swift heavy ion through a material can cause columnar, amorphous nano-structures known as ion tracks. Swift heavy ions are present in a number of applications ranging from nuclear reactors to nuclear waste storage and onboard spacecraft. The study of ion tracks has been ongoing since the late 1950s and has led to several technological advancements. In fact, ion beams have been used to enhance material properties and aid in the production of electrical components. Ion beams, and their resultant ion tracks, can therefore be seen as a method to purposefully alter material properties such as thermal …

Analysis And Mitigation Of Parallel-Plate Noise For High-Isolation Applications, Zachary Joel Legenzoff

Masters Theses

"Achieving highs levels of isolation between different functionalities in a PCB can be challenging. One of the major issues is that vertically adjacent planes or area fills in a PCB can form a parallel-plate waveguide with no cutoff frequency and serve as an efficient coupling mechanism between interconnects. Due to the finite size of the conductors, reflections off the edges of these parallel-plate cavities can result in the formation of standing-wave patterns with very high field strengths, resulting in high coupling at certain frequencies. This noise coupling mechanism can be suppressed by connecting the parallel plates together with an adequate …

Conical Folds -- An Artifact Of Using Simple Geometric Shapes To Describe A Complex Geologic Structure, Avery Joseph Welker

Masters Theses

"Accurate representation of the 3D shapes of natural folds is essential to characterization of the dynamic models for fold formation. Geometrical analysis of folds commonly relies upon analyzing patterns defined by the variation in the orientation of poles to planar surfaces deformed by a shortening event when plotted using graphical calculators (e.g., stereogram, polar tangent diagrams) to interpret the shape of folds. Stereograms for which orientation data define small circles are classified as non-cylindrical regular folds and are interpreted as "conical folds," where the shape of the fold is represented by a cone that terminates at a point. Utilizing similar …

Modulated Photothermal Radiometry: Detector Sensitivity Study And Experimental Setup, Jessica Nicole Seals

Masters Theses

"This thesis outlines the development of a system used for determining the surface thermal diffusivity of both non-irradiated and irradiated materials. The motivation for this work is to establish a modulated photothermal radiometry (PTR) system on the campus of Missouri University of Science and Technology. One of the main efforts described in this thesis is the design and construction of the physical apparatus. Along the way, it was necessary to perform a detailed sensitivity analysis of the system to determine whether the expected signal emitted from the sample falls within the bounds of detectivity for the HgCdTe (MCT) detector used …

Salt Mobility Under Different Geological Regimes, Oznur Surek

Masters Theses

"This study investigates the evolution of Dan Salt Structure in the southern salt dome province, Danish Central Graben and Mars-Ursa Basin in the Northern Gulf of Mexico to understand salt and sediment interaction over time under different geologic regimes. An integration of structural and stratigraphic analyses is conducted to understand the relationship between halokinesis and sedimentation.

Interpretation of the seismic data in Dan Salt Structure shows that the structure has a complex geometry, which is divided into upper and lower parts. The evolutionary stage of both the upper and lower parts of the structure has been influenced by salt. The …

Classification Of Eeg Signals Of User States In Gaming Using Machine Learning, Chandana Mallapragada

Masters Theses

"In this research, brain activity of user states was analyzed using machine learning algorithms. When a user interacts with a computer-based system including playing computer games like Tetris, he or she may experience user states such as boredom, flow, and anxiety. The purpose of this research is to apply machine learning models to Electroencephalogram (EEG) signals of three user states -- boredom, flow and anxiety -- to identify and classify the EEG correlates for these user states. We focus on three research questions: (i) How well do machine learning models like support vector machine, random forests, multinomial logistic regression, and …

Epithelium Detection And Cervical Intraepithelial Neoplasia Classification In Digitized Histology Images, Sri Venkata Ravitej Addanki

Masters Theses

“Cervical cancer is one of the most deadly cancers faced by women. It is the second leading cause of cancer death in women aged 20 to 39 years. In order to detect cancer at early stages, pathologists analyze the epithelium region from the cervical histology images. These histology images have a pre-cervical cancer condition called cervical intraepithelial neoplasia (CIN) determined by pathologists. This study deals with automating the process of epithelium detection and epithelium CIN classification in digitized histology images. For epithelium detection, the objective is to detect epithelium regions in microscopy images from non-epithelium regions and background. convolutional neural …

Characterization Of Free-Radical Solution Polymerizations Of Acrylamide Initiated By Persulfate Initiator Systems, Yashu Chen

Masters Theses

”In order to reduce the water production and improve the oil recovery of mature reservoir, various conformance control technologies have been extensively developed. Preformed particle gel (PPG), a cost-effective plugging agent, has been successfully applied to block the high permeability zone and thus to displace the water to up-swept zone.

A common PPG based on polyacrylamide hydrogel have been wildly used. Identifying the parameters that affect gelation performance and understand how these parameters affect the performance is very useful to predict and manipulate the gelation time and to control the performance of gels.

The objective of this research is to …