Digital Commons Network^™

Distributed Fiber Optic Sensors For Monitoring Spatially Continuous Strain And Quasi-Distributed Refractive Index Using Optical Frequency Domain Reflectometry, Sasi Jothibasu

Masters Theses

"This thesis is comprised of two papers and they describe distributed fiber optic sensing using an optical frequency domain reflectometry (OFDR) instrumentation system.

The first paper presents about distributed fiber optic sensor embedded within the layers of a composite laminates to monitor the continuous profile of strain using the optical frequency domain reflectometry (OFDR) system. The OFDR system was used to analyze the Rayleigh backscattered signal. The shift in the Rayleigh backscattered spectrum (RBS) was observed to be linearly related to the change in strain of the composite material. The continuous strain sensing using OFDR was demonstrated by an INSTRON …

Advanced Process To Embed Optical Fiber Sensors Into Casting Mold For Smart Manufacturing, Raghavender Reddy Jakka

Masters Theses

"Optical fiber sensors embedded in metals with distributed sensing can sense temperature at multiple points with single fiber. This is useful for smart manufacturing like structural health monitoring in aerospace industry and smart molds in manufacturing plants. There is a huge difference in thermal coefficient of expansion for fiber and metal. This is the reason for the increase in sensitivity for embedded fiber sensors. However, at high temperatures, the stress on the fiber increases, eventually damaging the sensor. The fiber-metal interface determines the sensor performance. A tight interface results in high sensitivity and a gap in the interface enhances sensing …

Carbon Black Production, Analyzing And Characterization, Shadha Khalid Jebur

Masters Theses

"Carbon black (CB) plays a significant function in the development of the electrical and mechanical properties of high performance for a tough elastic polymeric substance such as rubber materials. Thus, CB is widely used to manufacture a massive number of products such as reinforcing and pigment phase in automobile tires due to its high ability to increase tire life by reducing the thermal damage. This material is also used in belts, hoses, and other non-tire rubber goods. Before use in valuable materials. CB should first be analyzed and characterized by different instruments to obtain its mechanical properties. A new thermal …

Development Of Hollow Coaxial Cable Fabry Perot Resonator For High Temperature Sensing Applications, Mohammed Farhan Ahmed

Masters Theses

"The thesis is comprised of two papers, the first paper presents the novel High-Quality Factor Coaxial Cable Fabry-Perot Resonator for sensing applications. The sensor is fabricated by creating two highly reflective mirrors in a coaxial cable. The temperature response of the sensor was tested, by monitoring the frequency shift of the reflection spectra as the temperature increased linearly from 35 °C to 80 °C in steps of 5 °C. The sensor exhibited high temperature sensitivity and good measurement resolution.

A high Q factor of 133 was recorded. The second paper in the thesis presents a low cost, robust, homemade hollow …

Ceria Nanostructured Catalysts For Conversion Of Methanol And Carbon Dioxide To Dimethyl Carbonate, Jawad Hassan A Al Drwish

Masters Theses

"In this study, three different shapes of ceria (CeO₂) nanostructures (e.g., nanooctahedra, nanocubes and nanorods) were synthesized via the hydrothermal method and screened for carbonylation reaction. Of these three shapes of nanostructures, the nanorod was doped with metals such as Ca, Ni, Cu, and Co by wet impregnation method. All materials were characterized by XRD, NH₃/CO₂-TPD, XRF, FTIR and N₂ physorption to determine the crystal size and phases, acid-base properties, metal loading, and surface properties. The obtained materials were employed as catalysts for the activation of Carbon Dioxide (CO₂) and methanol …

Fluid Flow In A Krogh Cylinder: A Model For A Single Capillary And Surrounding Tissue, Xianjie Qiu

Masters Theses

"A model describing the flow of plasma from the capillaries to the interstitial space in the extravascular tissue and back into the capillaries is constructed and solved. The flow through the tissue or the interstitial spaces is described by the Brinkman equation for porous medium, modified to account for the presence of cells considered as spheres. The flow of blood through the capillaries is considered to be that of a Newtonian fluid. The flow between capillary and tissue is coupled by the permeability of the capillary wall. The nature of flow and its magnitude was found to be highly dependent …

Corrosion Performance Of Zirconium-Based Passivations On Electroplated Zinc Nickel, Madison Morgan Reed

Masters Theses

“Performance requirements for Department of Defense (DoD) electrical components include corrosion and electrical contact resistance. Historically, electroplated cadmium with a chromate conversion coating (CrCC) has been used to meet corrosion and contact resistance standards. However, replacements are needed for these materials because they are toxic and carcinogenic. Electroplated γ-ZnNi has been identified as an acceptable alternative to Cd. This study evaluated commercially available Zr-based thin films and sealers as passivations for potential replacement of CrCCs. Ten different passivations were tested and compared with bare γ-ZnNi. X-Bond and Zircobond passivations were found to provide some improvement to the bare ZnNi corrosion …

Monobore Completion Design: Classification, Applications, Benefits And Limitations, Anwar Khaled Al-Fadhli

Masters Theses

"A monobore completion is a simple completion design that uses the same internal diameter from the bottom of the well to surface. This may be accomplished by cementing a string of casing in a well, or by having tubing stabbed into a polished bore receptacle on a casing liner the same size as the tubing. Monobore completions have been applied extensively in oil and gas fields around the world, both onshore and offshore, from very low reservoir flow to extremely high production rates, since the late 1980s. They have proven beneficial due to their simplicity and cost savings. This study …

De-Embedding Method Comparisons And Physics Based Circuit Model For High Frequency D-Probe, Yuan Chen

Masters Theses

"In section 1, the procedures of 1X-Reflect smart fixture de-embedding (SFD), 1-port auto fixture removal (AFR), and 2X-Thru SFD are compared from various perspectives: test fixture design, the de-embedding procedure, and de-embedded results. The accuracy of fixture characterization and the de-embedded result is the key figure of merit (FOM) in each de-embedding method. Full wave models are built to evaluate the FOM of the three methods, by comparing the scattering parameters (S-parameters) and time domain reflectometer (TDR). A test coupon for measuring USB-C cables is adopted to serve as a manufactured validation purpose.

In section 2, a physics-based circuit model …

Computational Intelligence Methods For Predicting Fetal Outcomes From Heart Rate Patterns, Vinayaka Nagendra Harikishan Gude Divya Sampath

Masters Theses

"In this thesis, methods for evaluating the fetal state are compared to make predictions based on Cardiotocography (CTG) data. The first part of this research is the development of an algorithm to extract features from the CTG data. A feature extraction algorithm is presented that is capable of extracting most of the features in the SISPORTO software package as well as late and variable decelerations. The resulting features are used for classification based on both U.S. National Institutes of Health (NIH) categories and umbilical cord pH data. The first experiment uses the features to classify the results into three different …

Effect Of Variation Of Parameters On Biogas Production Using Aspen Plus & Dynamic Simulation Using Mimic, Shruti Shrikant Karambelkar

Masters Theses

"Design and management for Biogas production have gained significance in growing dependency on Renewable energy resources. This would need a detailed information on steady state and dynamic behavior of systems. In order to make this process environmentally ecofriendly, its needs a lot of improvisation on process simulation. Anaerobic digestion helps treat this inefficient water to be converted into water fit for effluent purposes.

Byproducts contain consists of organic, inorganic and wastes which lead to a high COD content and thus, cannot be discarded into the outlets. The anaerobic digestion process. A study of these effects with simulation need to be …

Bioaccessibility Of Lead From Contaminated Soil Using Phosphate Treatment -- Physiologically Based Extraction Test And In Vitro Gastrointestinal Method Test, Austin Charles Doss

Masters Theses

"Phosphate treatments are used to immobilize lead in soil by forming pyromorphite. Soil from Bonne Terre, Mo was collected to study whether such treatment decreases the bioaccessibility of lead. The soil was treated using 0.5 soil wt% of phosphate. Treatments were: none, phosphoric acid, triple super phosphate, and organic bone meal. Each sample was studied after one, four, sixteen, and twenty weeks; during this time span, water was added approximating the average rainfall rate. Percolated water was collected to test the leached phosphate concentrations. Phosphate was below the detection limit in that leachate. Remediated soil samples were used in Physiologically …

New Wellbore-Integrity Classification For Gas Migration Problems And New Cement Formulations Using Graphene Nano Platelets To Prevent Gas Migration Through Cement, Mohammed Mousa M. Alkhamis

Masters Theses

"Gas migration, one of the primary problems related to the integrity of oil wells, is caused by cement failures. Gas migration can result in costly well repairs and may endanger personal, equipment, and result in severe operational difficulties and environmental issues. The ultimate objectives of this research were to provide a comprehensive review of the problem and to provide a solution to the problem using Graphene Nano Platelets (GNPs).

An intensive review was performed to understand the cement failures. The reasons behind these failures were analyzed and classified with respect to their locations in the wellbore. Recommendations and potential solutions …

Methodology For 3d Full-Wave Simulation Of Electrostatic Breakdown Across An Air Gap, Darwin Zhang Li

Masters Theses

"The Rompe-Weizel SPICE model is used to obtain the time dependent arc resistance during simulation of air gap discharge. The SPICE model is solved using a circuit simulator, and the accompanying 3D model is solved using the transmission-line matrix time domain numerical method. Transient co-simulation is a new technique that is used to solve both circuit and 3D models at the same time. Transient co-simulation with the Rompe-Weizel SPICE model is first validated for different arc lengths using a simple geometry of a rod discharging to a ground plane. Validation is achieved by comparing the discharge currents from simulation with …

Development And Monte Carlo Validation Of A Finite Element Reactor Analysis Framework, Wayne J. Brewster

Masters Theses

"This study presents the development and Monte Carlo validation of a continuous Galerkin finite element reactor analysis framework. In its current state, the framework acts as an interface between the mesh preparation software GMSH and the sparse linear solvers in MATLAB, for the discretization and approximation of 1-D, 2-D, and 3-D linear partial differential equations. Validity of the framework is assessed from the following two benchmarking activities: the 2-D IAEA PWR benchmark; and the 2-D Missouri Science and Technology Reactor benchmark proposed within this study. The 2-D IAEA PWR multi-group diffusion benchmark is conducted with the following discretization schemes: linear, …

Transmission Line Inspection Using Suspended Robot: Cost Effective Analysis And Operational Routing Identification, Balaji Rathinam Nagarajan

Masters Theses

"High voltage transmission lines form a crucial part of the energy infrastructure of a country. Effective maintenance is required to maintain its reliability and reduce the probability of the occurrence of the outage. Conventionally, the routine inspection of the transmission line was conducted by linemen with the assistance of hot stick and helicopter, which is considered dangerous, time-consuming, and expensive.

In this thesis, we focus on the initial study of seeking the state of the art robotics technology to by largely replace human beings in transmission line inspection. The existing robotics technologies that are interested by utility companies, as well …

Recycling Effect In Expanded Granular Sludge Bed Reactor And Implementation Of Six Sigma In A Methane Generation Process, Manohar Manchenahalli Shivashankaraiah

Masters Theses

"Brewery industries are the largest consumers of water among several production industries. Despite consuming these huge amounts of water and electricity, they generate by-products that are harmful to the environment. These by-products contain organic, inorganic, and solid wastes with high chemical oxygen demand (COD) strength. The anaerobic digestion (AD) process plays an important role in treating this wastewater. This study investigates the design and development of an expanded granular sludge bed reactor (EGSB) effluent recirculation, which can achieve high COD removal efficiency of the wastewater and enhance the efficiency of generating biogas with high yields and increases in the concentration …

Controlling Phase Fractions Of 304l-Ss In Selective Laser Melting Using Cooling Rate, Eberechukwu Anthony Okoro

Masters Theses

"This study examines the thermal profile and the ferrite-austenite phase fractions upon heating and cooling of 304- stainless steel powder via Selective Laser Melting (SLM). Experiments were performed to validate the ABAQUS finite element model, while the phase transformation simulation was performed using MatCalc and ThermoCalc. A correlation between the thermo-mechanical changes in ABAQUS and the microstructural changes from MatCalc was obtained by matching their cooling rates. The result indicates that cooling rate has a significant effect on the phase fractions of FCC and BCC formed in 304L stainless steel via the SLM process. The results also indicate that for …

Cyber-Physical Security Of An Electric Microgrid, Prashanth Palaniswamy

Masters Theses

"Cyber-physical systems (CPSs) are physical systems that are controlled or monitored by computer-based systems. CPSs are a combination of computation, networking, and physical processes. As CPSs are a combination of various diverse components, they are vulnerable to several security threats. Moreover, there are many different security domains (not just high/low, nor necessarily hierarchical). This paper utilizes previously developed multiple security domain nondeducibility (MSDND) to uncover potential integrity vulnerabilities in an electric microgrid. Invariants are manually generated using the insights obtained through MSDND analysis and use linear regression to automate the generation of invariants. The vulnerabilities are then mitigated, to the …

Investigation Of The Information Provided By Light Touch For Balance Improvement In Humans, Anirudh Saini

Masters Theses

"This study investigates the information provided by Light Touch (LT) in improving human postural stability without mechanical assistance. Light Touch, an interaction force with a magnitude about 1 N, is known to improve postural stability in humans during quiet standing. However, the nature of the information from LT that helped improve balance is yet unknown. In this work, we hypothesized that LT provides information about one's body kinematics. We used a haptic robot to provide modulated, measurable light interaction force on the high back haptic location of humans to provide body kinematics-dependent information through LT. Standing balance experiments were performed …

Fuel Burnup Simulation And Analysis Of The Missouri S&T Reactor, Joshua Hinkle Rhodes

Masters Theses

"The purpose of this work is to simulate the fuel burnup of the Missouri S&T Reactor. This work was accomplished using the Monte Carlo software MCNP. The primary core configurations of MSTR were modeled and the power history was used to determine the input parameters for the burnup simulation. These simulations were run to determine the burnup for each fuel element used in the core of MSTR.

With these simulations, the new predicted isotopic compositions were added into the model. New core configurations were determined, and the burnup corrected model was used to predict the excess reactivity and control rod …

Numerical Simulation Study Of Factors Affecting Production Well Gel Treatment Using Linear Models With Crossflow, Kewei Shi

Masters Theses

"Conformance control is an inevitable topic related to water-flooding. Polymer gel has been proved to enhance oil recovery by blocking the existing water-breakthrough channels. Water that is injected subsequently will be directed to the unswept portion of the reservoir, replacing part of the remaining oil and increasing the oil-recovery factor. Prior to pilot tests of polymer gel treatment, laboratory experiments and numerical simulations are used to design the tests. Understanding physical meanings of key parameters that affect polymer gel treatment and relating the parameters from lab data and the simulator benefit field operation design.

This thesis study tries to evaluate …

Generalized Adaptive Variable Bit Truncation Model For Approximate Stochastic Computing, Keerthana Pamidimukkala

Masters Theses

"Stochastic computing as a computing paradigm is currently undergoing revival as the advancements in technology make it applicable especially in the wake of the need for higher computing power for emerging applications. Recent research in stochastic computing exploits the benefits of approximate computing, called Approximate Stochastic Computing (ASC), which further reduces the operational overhead in implementing stochastic circuits. A mathematical model is proposed to analyze the efficiency and error involved in ASC. Using this mathematical model, a new generalized adaptive method improving on ASC is proposed in the current thesis. The proposed method has been discussed with two possible implementation …

An Investigation Of The Influence Of The 2007-2009 Recession On The Day Of The Week Effect For The S&P 500 And Its Sectors, Marcel Alwin Trick

Masters Theses

"Several studies have shown that the mean returns and the volatility structure of stock markets change seasonally or by day of the week. For instance, some authors found out that Monday returns are lower compared to Friday returns or that volatility on Wednesdays are lower compared to the rest of the week. Other researchers showed that these effects have changed after certain periods of economic stress. This led to the question, whether the day of the week effects in returns and volatility are in the US stock market and if patterns have changed from pre-recession through the 2007-2009 recession into …

An Approach For Formal Analysis Of The Security Of A Water Treatment Testbed, Sai Sidharth Patlolla

Masters Theses

"This thesis focuses on securing critical infrastructures such as chemical plants, manufacturing units, and power generating plants against attacks that disrupt the information flow from one component to another. Such systems are controlled by an Industrial Control System (ICS) that includes controllers communicating with each other, and with physical sensors and actuators, using a communications network.

Traditional security models partition the security universe into two worlds, secure and insecure, but in the real world the partitions often overlap and information is leaked even through the physical observation which makes it much harder to analyze a Cyber physical system (CPS). To …

Cellular Hitchhiking Via Injectable Microparticles, Daniel Smith

Masters Theses

"Tissue engineering is a process of developing new tissues in a host. Tissue engineering draws upon revitalizing damaged tissues that otherwise would not heal completely from the body's natural response. To augment the body's natural response to impairment, cells can be transplanted to the afflicted area to boost the healing response. Implementing these cells onto scaffolds and transplanting them into the body improves the healing response dramatically. Tissue regeneration improves when a biodegradable scaffold is used in conjunction with cells to augment the body's healing response. Microparticles provide a surface that can mimic the environment cells perceive in vivo, …

Cellulose And Sulfate Degradation In A Biochemical Reactor During Treatment Of Mine Drainage, Sweta Ojha

Masters Theses

"Seventy-two biochemical reactors were set up, and operated using a mixture of chip-bark, horse manure, and gravel as the biochemical treatment substrate. The simulated mine water containing sulfate (1000 mg/l) was pumped into each reactor at a flow rate of 0.5 ml/minute (approximate), giving an empty bed contact time of 8 days. The main idea is that the microorganisms present in horse manure would convert the cellulose in chip-bark into volatile fatty acids. The produced volatile fatty acid would enhance the metabolism of sulfate-reducing bacteria (SRB) initially present in horse manure, which would degrade (and eventually remove) the sulfate from …

Embedded Fiber Optic Sensors For Temperature Monitoring Of Continuous Casting Mold, Yiyang Zhuang

Masters Theses

"The continuous casting process has been widely used for most of the steel production in the world instead of conventional ingot casting/rolling. Traditionally, thermocouples are being widely used to monitor the mold temperature in the continuous casting which has the following drawbacks: large size, low spatial resolution, and single detection point. On the contrary, fiber optic sensors can be a promising solution to the continuous casting temperature monitoring owing to its advantage of compact size, high resolution, high-temperature survivability, etc.

In this thesis, we successfully developed extrinsic Fabry-Perot interferometer (EFPI) sensor for point temperature sensing, and optical frequency domain reflectometry …

Grain Refinement Of High Alloy Stainless Steels In Sand And Directionally Solidified Castings, Dustin Alan Arvola

Masters Theses

"The goal of this research project is to develop an industrially viable melting process that will control the crystallization macrostructure of austenitic grades of cast steels. Titanium nitride (TiN) has proven to be an effective grain refiner of austenite. Theoretical simulation and experimental application has led to the development of a repeatable grain refining melt process for austenitic stainless steel alloys.

Grain refinement of the as-cast structure of Cr-Ni stainless steel alloys solidified with primary FCC, BCC and dual FCC/BCC phases was studied experimentally. Refinement was achieved in both cast ferritic and austenitic grades. Dual solidification of …

A Hybrid Cavity And Parallel-Plate Peec Method For Analysis Of Complex Power Net Area Fills, And A Tool Development For Peak Distortion Analysis, Chenxi Huang

Masters Theses

"Modern ASICs and FPGAs are becoming more and more dense, which is causing an increasing demand of the current draw from the power distribution network (PDN). And one of the main design objectives of a power distribution network is to reduce the voltage noise ripple below a specified allowable limit. Although the target impedance is a commonly used criterion in most PDN designs, it may not be efficient because it's usually rather pessimistic. Herein a time domain voltage ripple decomposition approach is proposed to avoid overdesign as well as provide design guidance to PI engineers. Based on a physics-based circuit …