Digital Commons Network^™

The Resource Base For Water-Oriented Recreational Areas In Coles And Cumberland Counties, Roger J. Barry

Masters Theses

No abstract provided.

Carcinostatic Sulfonic Acid Esters Of Selected 1,4-Diols, Robert A. Earl

Masters Theses

Introduction

The purpose of this research was to prepare the bisarylsulfonic acid esters of 1,4-butanediol and 1,4-but-2-ynediol.

This series of compounds is of interest because of the antitumor activity exhibited by the bismethanesulfonates of 1,4-butanediol and 1,4-but-2-ynediol. The compounds which were prepared were submitted to Cancer Chemotherapy National Service Center for evaluation in their anticancer program.

It was hoped that the compounds synthesized would be of pharmacological value. It was further hoped that the biological test data of these compounds would demonstrate a correlation between types of substituents on the aromatic nucleus and the degree of activity of the compounds. …

Studies On The Conversion Of Indole Acetic Acid And Oxindole Acetic Acid By Hygrophorous Conicus, Barbara Ruth Patterson

Masters Theses

"The fungus, Hygrophorous conicus, produces the enzyme, indole acetic acid oxidase, when grown in the presence of indole acetic acid (IAA) or tryptamine. The IAA acts both as an inducer and a substrate for this intracellular enzyme. The product of the oxidation catalyzed by the IAA oxidase is oxindole acetic acid (OIAA). Since the IAA and OIAA absorb maximally at two different wavelengths the use of spectrophotometric analysis was possible for assaying for the IAA oxidase activity. Paper chromatography was used for qualitative identification of the IAA and OIAA. The rate of growth and the rate of formation of the …

Comparison Of Methods To Select A Probability Model, Howard Lyndal Colburn

Masters Theses

"A comparison is made between the estimates of the parameters in a gamma distribution obtained by the method of moments with those obtained by a numerical approximation to the maximum likelihood estimates. The estimates obtained by the numerical approximation had a smaller mean squared error from the true value than the estimates obtained by the method of moments. Modifications to tests of fit are made in order to develop methods to select a distribution from a set of possible distributions for a population with an unknown distribution. These selection methods are compared in their ability to make correct selections. Although …

Heat Transfer Coefficients Across Bonds And Contacts, Eugene Charles Fadler

Masters Theses

"The purpose of this investigation was to experimentally determine heat transfer coefficients across interfaces, including the effects of the thermal conductivity of the adherends, the hardness of the adherends, the bond thickness, and the type of adhesive.

Aluminum alloy, steel, copper, and extruded nylon rods were used as adherends; all 1.875 inches diameter and 8 inches long. Each was cut radially at its midpoint and faced off to the desired surface finish. Bare interface tests were conducted before the adherends were bonded together. The adhesives used were high grade silica refractory cement, two-part epoxy resin adhesive, and thermosetting synthetic rubber-phenolic …

Kinetics Of Base-Catalysed Reactions, Kunjvihari Ramanlal Mehta

Masters Theses

"The work of Wulfman on the mechanism of the Michael reactions suggests that the normal Michael reaction is second order kinetically, with the rate being proportional to the concentration of the acceptor and the active form of the addendum. A detailed reaction mechanism of normal Michael reaction was not proposed due to insufficient data which resulted from analytical difficulties. This investigation involves the study of the kinetics of normal Michael reaction from the stand point of base strength, solvent concentration and acidity of the reactants, solvent and products"--Experimental. A. Purpose of Investigation, page 17.

Linear And Quadratic Programming With More Than One Objective Function, William John Lodholz

Masters Theses

"A computational procedure is presented for determining optimal solutions to the linear and quadratic programming problem when there is more than one objective function subject to linear constraints. In general a unique solution does not exist and a set of "best" or "efficient" points is determined and presented in graphical or tabular form. To solve the mathematical programming problems the simplex method is used for linear objective functions and Wolfe's method is used for quadratic objective functions"--Abstract, page ii.

Petrology And Mineralogy Of The "Old Workings Area," El Salvador, Chile, Bertis James Vander Schaaff

Masters Theses

"The 'Old Workings Area,' so called for its early mining by the Incas, is located 4 1/2 miles northeast of the El Salvador Porphyry copper deposit, the third largest copper producer in Chile. The area mapped in this study is shown to consist of rhyolite pebble conglomerate, two volcanic flows, andesite and rhyolite porphyry, and two intrusions. Quartz porphyry and tourmaline-bearing breccia. Petrographic study of surface and drill core rock samples confirms the field nomenclature used for the five rock types. All of the rock types are altered, but the quartz porphyry and andesite are the most intensely altered. Both …

Analog Simulation Of A Synchronous Machine, J. Derald Morgan

Masters Theses

"The problem presented here is a study by an analog computer simulation of a synchronous machine under balanced three phase, short-circuit conditions. The purpose is to obtain a solution that is more accurate than one obtained by approximate methods using transient and subtransient reactances as is often done. This simulation is accomplished by using an idealized synchronous machine. The equations relating voltage and currents in the machine, as well as speed and torque, are presented for simulation. The equations for the machine include the saliency of one member, as well as the effect of speed and the damper windings. A …

A Feedback Compensator Design For Linear Control Systems, Thsai-Ten Lin

Masters Theses

"The compensation process in control system engineering is indispensable. The addition of a compensator to a fixed plant can often make the system meet certain specifications easily. In this study an attempt was made to use a general purpose digital computer to design a feedback compensator. The method developed is first to determine the minimum gain of the amplifier and the number of compensator poles and zeros based on the given specifications. then free hand root-loci are plotted, with several combinations of possible compensation variables. These data are used as the open-loop transfer function from which the poles and zeros …

The Effect Of Submerged Jets On The Hydraulic Jump, Harvey E. Jobson

Masters Theses

"Tests were performed in order to determine the effects of forcing submerged jets of water into the base of a hydraulic jump. The specific energy of the water leaving the hydraulic jump, the length and the wave formation properties of the jump which had been modified by the introduction of submerged jets were determined and compared with the same characteristics of a normal hydraulic jump and a hydraulic jump which had been modified by the use of baffle piers.

Test results indicate: (a) the quantity of water flowing through the submerged jets is a primary factor in determining the specific …

Transient Temperature Distribution In A Finite Cylinder And An Infinite Cylinder Subjected To Some Boundary Conditions, Harng-Sen Huang

Masters Theses

"This thesis is concerned with the theoretical heat transfer analysis of solid cylinders. The first problem considered is the transient temperature distribution in a finite cylinder. This cylinder has a uniform initial temperature and a uniform constant surrounding temperature. This case is solved by the separation of variables. Combining the charts for the infinite cylinder and the charts for the infinite plate one can determine the solution to this case easily. If a uniform constant surface temperature is prescribed instead of a surrounding temperature, the solution can be obtained from the previous one by charging the Nusselt number to infinity. …

A Study Of Certain Conservative Sets For Parameters In The Linear Statistical Model, Roger Alan Chapin

Masters Theses

"In the case of the linear statistical model, it has been shown that under certain conditions the confidence intervals obtained by considering the parameters one at a time are conservative when used as a joint confidence region, using the product of confidences as the confidence. However, nothing had been known of how conservative they are. This research provides accurate estimates of the true confidence for these cases.

Also, it has not yet been proved that they are indeed conservative for all cases. It is thought that they are, and the results of this research support this conjecture"--Abstract, page ii.

Buckling Strength Of Titanium Alloy Columns In The Elastic And Inelastic Range, Richard O. Rintoul

Masters Theses

"The purpose of this study is to find experimentally the buckling strength of titanium alloy (Ti.-6Al.-4V.) columns and to determine a suitable equation to be used in the design of titanium columns in the elastic and inelastic range.

Effective length over radius of gyration ratios of from 178 to 16.1 were studied. High strength steel plates with cylindrical radii milled in the faces served as column ends while cylindrical radii ends were milled on the columns. SR-4 strain gages were used at the mid-points of all columns to determine lateral deflection and predict a theoretical buckling stress. Actual column loads …

Geology Of Pride Mine And New Standard Mine Area, Northwestern Yuma County, Arizona, Henry E. Fernandez

Masters Theses

"A thick section of presumably Precambrian gneiss with thin intercalated bands of marble and schist has been mapped. There is structural continuity within these rock types as they are mutually intercalated, conformable, have gradational relations and show equal participation in the same individual fold. The layers of schist and marble in the gneiss can be followed over long distances. These rocks have undergone intense regional metamorphism, primarily dynamic, with a possible regional compressive force generated from NW-SE giving rise to sets of folds and faults in the area. From structural, petrographic and field evidence, it is concluded that the metamorphic …

Analysis Of Continuous Folded Plate Roofs, Yung-Ping Wang

Masters Theses

"This work presents an analysis of continuous folded plate roofs considering the effects of relative joint displacements. For this analysis the normal modes of the lateral beam vibration were used as the form of the deflection curve and the loading was sinusoidal. By using symmetry and anti-symmetry, a possible method of analyzing prismatic folded plate roofs comprising one bay transversely but continuous over two or more spans longitudinally is suggested"--Abstract, page ii.

Optimum Finite Memory Nonlinear Filter, Ching-Chyoun Yang

Masters Theses

"This thesis investigates the possibility of using the Zadah theory and a machine type computer to design an optimum finite memory nonlinear filter for extraction of Poisson distributed signal pulses from a background of Gaussian noise. Basically the procedure involves the technique of solving simultaneous equations by the computer. We demonstrate that it is possible to find the limitation of the filter of class N₁ in terms of an absolute minimum mean square error. However, due to the capacity of the computer we do not actually determine the absolute minimum. Nevertheless we do show that the mean square error decreases …

An Instrument For The Measurement Of Anelastic Properties Of Glass, Thomas Frederick Miller

Masters Theses

"An inverted torsion pendulum for measuring the internal friction and dynamic shear modulus of glass fibers over an extended temperature range has been constructed and calibrated. The calibration consists of the determination of the moment of inertia. Extraneous damping losses were investigated and primary sources were found to be (1) the suspension thread, (2) the method of securing the fiber and (3) air damping. Anelastic measurements were made on an annealed vitreous silica fiber and a soda-lime-silica fiber"--Abstract, page ii.

The Geology Of The Interstate Highway 244 And 44 Exchange, Kirkwood, Missouri, John Neil Thomas

Masters Theses

"During the summer of 1964, construction was completed on the intersection of Interstate Highways 244, 44 and U.S. Highway 66, one mile southwest of Kirkwood, Missouri. during the construction of the interchange, numerous artificial exposures of rocks of the middle Mississippian Meramecian Series were exposed. This provided an excellent opportunity for examining fresh exposures near the type Meramecian Series. The formations of the area were studied, and startigraphic [sic] sections were prepared from three of the more complete sections that were measured and described. The highway cuts expose complete sections of the Warsaw and Salem formations, and the lower part …

Analog Computer Study Of Unequally Spaced Antenna Arrays, Fred M. Dickey

Masters Theses

"The problem undertaken in this thesis was to study the basic properties of unequally spaced antenna arrays. The study was done on a trial and error basis by simulating the expression for the far field pattern of a general array on an analog computer. Many patterns were obtained from the analog computer for the purpose of comparison. The patterns of two spacing schemes that are typical of unequally spaced arrays are presented for the purpose of illustration"--Abstract, page ii.

A Terrain Study Of The Bloodland Quadrangle, Pulaski County, Missouri, Lawrence E. Mullins

Masters Theses

"This study is an investigation of the environmental conditions which affect cross country movement for tracked military vehicles on a major portion of the Fort Leonard Wood Military Reservation.

The terrain has been mapped from the trafficability standpoint by an investigation of the geology, topography, pedology and restrictive vegetation characteristics of the Bloodland seven and one-half minute quadrangle. The terrain analysis was accomplished by a combination of map study, laboratory investigation, photo interpretation, and direct field study of representative soil and vegetation types. The conclusions of this analysis are presented in the form of a cross country movement map"--Abstract, page …

A Measurement Of Dead Space And Its Effect On The Homogeneous Nucleation Rate Of Water Vapor In Helium, Michael A. Grayson

Masters Theses

"The existence of a "dead space" surrounding each nucleated water droplet is demonstrated and measurements of its rate of development are made. The effects of this "dead space" are considered to be due to both the removal of vapor from the helium-water vapor mixture and the evolution of heat about the drop due to its growth. The results confirm the usefulness of the concept of a "dead space" and provide a means for its measurement with respect to time. Recommendations for further study and a method of correcting for dead space effects is given"--page [i].

Transformations Of Tryptamine And Tryptophan By Basidiomycetes, Hsaio-Lung Cheng

Masters Theses

"The product formed from tryptamine by Trichloloma nudum was identified as indoleacetic acid (IAA) and from tryptophan by Cantharellus cibrarius as indolelactic acid (ILA). The products were extracted from the spent media with organic solvents. Purification and identification of the crystalline transformation products were accomplished by means of paper chromatography, spectrophotometry and thin layer chromatography.

The conversion of tryptamine and tryptophan was also studied in cultures of Lencopaxillus paradoxus, Pluteus granularis and Pleuatus ostreatus. Only Pluteus granularis was found to transform tryptamine into IAA. Lencopaxillus paradoxus transformed tryptamine into oxindoleacetic acid (OIAA).

Paper chromatography proved to be useful …

Infinite Beams On An Elastic Foundation, Shi-Peing Chang

Masters Theses

"In this paper a partial differential equation for the analysis of beams resting on an elastic foundation under dynamic load is presented. A solution for this equation is derived, and solutions for various boundary conditions of infinite beams resting on an elastic foundation are discussed. The application of the equation is demonstrated by an example of a moving load traveling along an infinite beam"--Abstract, page ii.

The Effect Of Small Alloy Additions On The Quench Induced Texture Of Alpha Uranium, Kenneth Ray Riggs

Masters Theses

"The preferential orientations produced in binary alloys of U-Si and U-Cr on plane sections perpendicular to the direction of heat flow by cooling from beta-phase temperatures were determined. The experimentally determined textures were presented using inverse pole figures. A definite and reproducible relationship was found to exist between the preferred orientation present at any position and the cooling rate which material at the position had experienced. It was found that the concentration of the alloying elements within the ranges studied had little detectable effect upon the observed relationship between the cooling rate and the resulting preferential orientation. It was postulated …

Equivalent Circuit Of Unsymmetrical Inductance Diode Using Linvill Lumped Model, Donald Lawrence Willyard

Masters Theses

"Integrated circuit techniques and applications are rapidly changing the electronics industry. A problem common to both state-of-the-art approaches to integrated circuit fabrication is that of miniaturizing and integrating inductors. It is found that, for a certain range of injection current levels, certain unsymmetrically doped junction diodes have an inductive small-signal impedance. This thesis discusses the theory of inductance diodes and applies finite difference equations and the Linvill lumped model to the differential equations that describe their carrier flow processes. The static I-V characteristic and the small-signal equivalent circuit at high injection densities are derived. The elements (R,L,C) of this equivalent …

I. An Investigation Of The Organic Compounds In The Media And Mycelium Of Naucoria Confragosa. Ii. Study Of The Extra-Cellular Pigments Of An Unknown Fungus, Yueh-Tsun Chen

Masters Theses

"The fungal metabolites excreted into the culture fluid by basidiomycetes growing on synthetic glucose media as well as formed in the mycelia of the organisms were investigated in this thesis. Earlier unpublished work had shown that Maucoria confragosa excreted into the medium compounds which were thought to be phenols. Insufficient material was recovered from an ethyl acetate extract of the medium in the present study for further investigation. Colorimetric methods were employed both for the quantitative estimation of reducing sugar not consumed by the microorganisms as well as for a measure of the total organic solids present in the spent …

The Prediction Of Mix Design Properties For Dense Graded Bituminous Mixtures, Robert Ernest Weeks

Masters Theses

"The purpose of this investigation was to ascertain the feasibility of interpolating values of the physical properties of a dense graded bituminous mix between known values. Also the effects of limestone mineral filler on the properties of a dense graded mix are evaluated. The variables in this study were mineral filler and asphalt cement. Control mixes were established at 2, 6 and 10 percent mineral filler and experimental mixes were prepared at 4 and 8 percent filler. The aggregate consisted of limestone and was mixed with an asphalt cement of 85-100 grade penetration. Al mixes were tested by the Marshall …

The Design And Construction Of An Instrument For Calibrating Accelerometers, Richard Rabenau

Masters Theses

"The purpose of this work was to design and construct a facility to calibrate accelerometers. A ceramic piezoelectric shaker and modified Michelson interferometer together with necessary electronic equipment were used. The system produced accurate and stable acceleration at five discrete points from 1,000 to 5,000 cycles per second. the maximum calibration levels were approximately 50 g's"--Abstract, page ii.

A Circularly Polarized Corner Reflector Antenna, Walter Ronald Koenig

Masters Theses

"Image theory is used to develop the far field and polarization equations for a ninety degree corner reflector antenna. These equations are in terms of spherical coordinates, the length of the dipole element, the distance of the dipole from the corner of the reflector, and the angle of tilt of the dipole element with the apex of the corner. The equations are simplified to give the far fields in the vertical and horizontal planes for the special case of a half-wavelength dipole. An expression to calculate the distance of the dipole from the corner necessary to give circular polarization broadside …