Digital Commons Network^™

Radial Water Encroachment - An Approximation, Tommie C. Wilson

Masters Theses

"This presentation consists of the application of empirical equations for the calculation of the water influx into a radial oil reservoir in which the history of the rate and cumulative water influx are equated to the pressure decrements and time. This new analysis, based on William Hurst's solution for the steady-state water influx, yields an accurate method for determining water influx through the application of simple linear empirical equations. These linear approximations reproduce the rigorous influx solutions to a maximum deviation of 1.6 per cent"--Abstract, page ii.

Stability Determination By Liapunov's Method In Nonlinear Control Systems, Neng-Chung Liao

Masters Theses

"An introduction to Liapunov's second method as it applies to control system stability is presented in this work. Main theorems and definitions of Liapunov's method are treated. In particular, Lur'e's method and Szego's method for testing the stability of a nonlinear system are presented, and several examples are used to illustrate these procedures"--Abstract, page ii.

Use Of Spent Sulphite Liquor For Stabilization Of Fractured Rock And Sealing Off Water Bearing Formations, Laxman Singh Sunda

Masters Theses

"The paper industry, in its process of manufacturing pulp from wood, produces large quantities of a substance called lignin, lignin sulphite, or lignosulphonate. This material has been disposed of as a waste product; however, it does have many potential uses. In this investigation, lignosulfonates were used as agents for bonding rock sections together and, as the chief component of gels, for filling the pores of artificial rock cores. The purposes of these tests were to find how this substance could be used in the mining industry, for stabilizing fractured ground around mine openings and for sealing off water influx into …

Stereochemistry Of Chlorinated Diels-Alder Adducts, Harry R. Musser

Masters Theses

"Hexachlorocyclopentadiene and related compounds have been studied extensively in connection with Diels-Alder reactions. Many of the adducts formed are used as intermediates in insecticide syntheses. It is of interest to study the stereochemistry of the adducts of one of the hexachlorocyclopentadiene derivaites. 5,5-Dimethoxy-1,2,3,4-tetrachlorocyclopentadiene and various dienophiles, when allowed to react, yield compounds of the bridges bicyclo [2.2.1] hept-2-ene series. The study of the endo and/or exo configuration of various functional groups such as carboxyl, aldehyde, and hydroxymethyl can be related to the known exo-5-hydroxymethyl1-1,2,3,4-tetrachlorobicyclo-[2.2.1] help-2-ene-7-one"--Introduction, page [1].

Geology, Geochemistry And Genesis Of Selected Skarn Deposits, Northern New Brunswick, Canada, Donald John Bachinski

Masters Theses

"An exhaustive geological and geochemical study is presented of magnetite-chalcopyrite skarn deposits occurring within the thermal aureole of the Nicholas Denys quartz maonzonie-granodiorite stock. The deposits are crudely lenticular and occur in metamorphosed impure limestone and siliceous, in part limy, argillite-greywacke. These are now represented by andradite-epidote-diopside-calcite skarn and cal-silicate to horn-felsic rocks respectively. Both deposits are spatially related to the Main fault of the Rocky Brook-Millstream fault system; late, generally northwest trending transverse faults are conspicuous and are deemed of importance in ore localization"--Abstract, page [ii].

Zinc And Copper Content Of Stream Sediment In South-Central Missouri, Shih-Cheang Cheng

Masters Theses

"Thirty samples of stream sediment from the North Fork River, Bryant Creek and related tributaries in south-central Missouri have been analyzed for cold-extractable copper, cold-extractable heavy metal, total copper and total zinc.

Cold-extractable copper varies from 0 to 10 ppm and averages less than 1 ppm; cold-extractable heavy metal varies from 3 to 30 ppm and averages 12 ppm; total copper varies from 50 to 200 ppm and averages 88 ppm; total zinc varies from 20 to 300 ppm and averages 86 ppm.

The pH of the stream water appears to have no affect on the metal content of the …

A Second Study Of Homogeneous Nucleation Of Water Vapor In Helium, Raymond J. Schmitt

Masters Theses

"Absolute homogeneous nucleation rates in a supersaturated mixture of water vapor and helium are measured using a long sensitive time expansion chamber and a method devised by Kassner and Allard. A pulse technique is employed to produce the nucleation in an effort to suppress disturbing influences of vapor depletion and droplet growth. The time-varying nature of the supersaturation during the nucleation pulse is taken into account by an Integration over the pulse. Observed and theoretically predicted droplet concentrations are related by an assumed nucleation rate law which is adjusted until the total droplet populations predicted by integration of the assumed …

Maximum Present Value Calculations With Digital Computers, James Boyd Robison

Masters Theses

"This paper discusses maximum present value calculations for a mineral property using digital computers. A semi-quantitative mathematical model to optimize operating conditions is considered. The model is based on a modified cash flow analysis. Many variables affect the solution, and their effect upon present value is described. Selected data (mining rate, costs, reserves, metal sales price, and others) for a hypothetical open pit copper mine are used in a set of solutions for present value. The results are discussed in detail. It is concluded that: (1) Digital computer methods are rapid and useful, (2) Changes in the mining rate, average …

A Graphical Method Of Estimating Heat Capacities Of Hydrocarbons, Pu-Ying Liu

Masters Theses

"Heat capacity arises because the individual particles comprising a substance are able to move and thus take up kinetic energy and usually also potential energy as the temperature rises. In many substances electrons do not absorb energy until very high temperatures are reached. Thus most heat capacity effects are interpreted in terms of the motion of the atoms neglecting electronic transitions. The total internal energy of a material is, therefore, equal to the sum of the energies due to translational and rotational motion of the molecules and to the vibrational motion of the atoms making up the molecules...The objective of …

Finite Difference Solution For Triangular Plates, Hao-Yang Huang

Masters Theses

"In this thesis the finite difference method is used to solve triangular plates with uniformly distributed transverse load. As a matter of convenience triangular coordinates are used. The supporting conditions as well as the shape of plate are varied. All calculations are performed by digital computer. The patterns of differential operators in triangular coordinates, the deflections of plates, and the moment distributions are shown and discussed. The results obtained for some special cases are compared with published solutions"--Abstract, page i.

Drop Growth In A Supersaturated Vapor, Roger Buecher

Masters Theses

"Using kinetic theory and the thermodynamics of phase transitions, a method is derived for finding the growth rate and temperature increase of a droplet in water vapor which has been supersaturated by the expansion of a cloud chamber. Calculations are performed for a specific numerical example and compared to other work in this field"--Abstract, page [2].

Taxonomic Study Of Fossil And Recent Otoliths Of Certain Cuskeels, Gary Neal Pointer

Masters Theses

"Otoliths are calcareous structures occurring in the auditory labyrinths of teleost (bony) fishes. Three pairs of these earstones normally are found: the sagitta, in the sacculus; the asteriscus, in the lagena; and the lapillus in the utriculus. In fishes other than the Order cypriniformes (carp, catfishes, and related forms), the sagitta is the largest otolith, and it may be used in taxonomic and other studies. Fossil earstones of cuskeels (Family Ophidiiae-Brotulidae), constituting the Preophidion complex, occur in relative abundance at various levels in the Claiborne, Jackson, and Vicksburg groups of the Lower Tertiary on the Gulf Coast. The present study …

Geology Of Cienega Mining District, Northwestern Yuma County, Arizona, Elias Zambrano

Masters Theses

"The purpose of this investigation was to determine the general geology of an unusually complex area containing several small mines and located in the northwest corner of Yuma County, Arizona. This report is the first attempt to work out in detail the lithology, structure, stratigraphy, petrography, and economic geology of the area"--Introduction, Purpose and Scope, page 1.

Construction Of A Capillary Viscometer And The Study Of Non-Newtonian Liquids, Hsun Kuang Yang

Masters Theses

"A capillary tube viscometer was built for the purpose of investigating the fluid properties of non-Newtonian aqueous CMC and Carbopol solutions. The viscometer was tested with Newtonian liquids (glycerine, water and two different oils) having known viscosities to insure that the viscometer was operating correctly. The shear stress-shear rate data obtained for different concentrations of CMC and Carbopol solutions were correlated using the simple power law model. The power law constants were only slightly affected by saturating the solution with iodine and carbon tetrachloride. Aging had very little effect on the viscosities of the CMC solutions but had a considerable …

Operating Characteristics Of A Cloud Chamber Suited For Condensation Measurements, Donald L. Packwood

Masters Theses

"It is the main purpose of this research to investigate the validity of using the adiabatic laws to determine the temperature from the pressure ratio. Some of the effects which might invalidate the use of the adiabatic laws will be studied. Special consideration will be given to the accurate calculation of [gamma]. Carstens' approximate calculation of the heat flow into the chamber due to conduction will be checked. A measurement will be made of how long the chamber remains adiabatic after an expansion when the continuing expansion technique is used. The static temperature gradient throughout the chamber will be measured …

A Study Of Re-Evaporation Nuclei, Ronald Dawbarn

Masters Theses

"Classical considerations of the evaporation of a homogeneously nucleated droplet in an atmosphere of low humidity, indicates complete evaporation of the drop. Experimental results however, show that there is left behind a residual nucleus that is quite stable. Condensation occurs on these nuclei at comparatively low supersaturations. Using a specially instrumented cloud chamber, experimental procedures are described which attempt to investigate some of the properties of these nuclei. Various possibilities causing this stability are examined and compared to the experimental results obtained"--page [ii].

Study Of Deformation Of Non-Oscillating Droplets In Liquid Media, Arun Kumar Agrawal

Masters Theses

"The object of this investigation was to find a method for predicting the deformation of non-oscillating liquid droplets which are moving in liquid media, from a knowledge of droplet size and the physical properties of the continuous and dispersed phase systems. The deformation of thirteen liquid-liquid systems was experimentally studied in this investigation"--Abstract, page i.

Free Convection Heat Transfer From An Inclined Heated Flat Plate In Air, Shu Chien Yung

Masters Theses

"An experimental investigation has been performed to determine the free convection heat transfer from a heated flat plate in air moved from the vertical position through three inclined positions to the horizontal position. The hot surface of the plate was facing downward for the horizontal and three inclined positions. Tests were performed at plate surface temperatures from 120°F up to 404°F. Data for the plate surface temperature at about 165°F with the plate in the vertical position agrees very well with previous experimental work. This same data was used to determine a new parameter, introduced into the Pholhausen free convection …

An Apparatus To Measure Capillary Jet Thrusts And The Evaluation Of Normal Stresses In Fluids, Charles Donald Green

Masters Theses

"The purpose of this work was to design, construct and calibrate simple, inexpensive apparatus which could be used to measure the normal stresses and tangential shear stresses of a fluid. For normal stress measurements, the capillary jet thrust principle was selected. A standard analytical balance was modified so that capillary tubes could be fitted on it horizontally. It was designed so that the thrust produced by a jet of fluid from the tube caused a deviation from the zero balance position. The weights needed to rezero the balance gave a measure of the thrust"--Summary, page 1.

A Computer Approach To Transistor Circuit Design, Kwok Chee Hong

Masters Theses

"The design of amplifiers is usually approached through experimental study. This thesis proposes a mathematical approach, using a digital computer to predict the performance of an active transistor circuit (a frequency equalizer circuit to compensate for the RIAA recording frequency characteristics) prior to the actual construction of the physical system. The simple but powerful computer analysis method will be based upon the nodal equations of the complete circuit. The primary aim is to design a circuit which would give a desired frequency-gain characteristic. The complete set of simultaneous complex nodal equations describing the circuit operation is then written. Based on …

Mass Transfer In The Electrodialytic Desalination Of Brackish Water And A Correlation Of Experimental Data With Theory, James Shih-Jiann Yang

Masters Theses

"The object of this work is an experimental investigation into the possibility of obtaining an increase in mass transfer in the electrodialysis of brackish water by altering the physical character of the selective membrane, and a correlation of experimental mass transfer data with theory"--Introduction, page 1.

Optimization Of Flywheel Design For Internal Combustion Engines, Dady Jal Patel

Masters Theses

"A new approach to the problem of flywheel design has been developed, thus eliminating some of the problems of conventional design. The term flywheel design, in this thesis, refers to the determination of the flywheel inertia (mass moment of inertia) only. Two versatile computer programs were set up to obtain the flywheel inertia and the turning moment diagram for a large variety of internal combustion engines, and use was made of these programs to optimize the inertia of the flywheel with respect to speed. As an illustration the data of a 1960 Corvair engine were selected, and the results obtained …

An X-Ray Study Of The Lead Zirconate-Bismuth Ferrate System, Pen-Chu Chou

Masters Theses

"The lead zirconate-bismuth ferrate system was studied employing x-ray and microscopic analysis. Samples were prepared by sintering stoichiometric mixtures of the corresponding oxides followed by air quenching. The results of the analyses show the system to be probably solid solutions over the entire compositional range, although small amounts of other phases are present in some regions.

X-ray data indicate a multiple cell, orthorhombic phase, to exist over the range 100-30 mole percent PbZrO₃ . From 100-82 mole percent PbZrO₃ , the addition of BiFeO₃ reduces the distortion of the phase such that a nearly cubic x-ray pattern is obtained at …

The Development Of Conical Stress Forms By Explosive Charges, Walter T. Casquino

Masters Theses

"Usually stresses generated by explosive charges during blasting are considered to propagate through materials in a spherical manner. Although conical stress waves had been suggested by a few investigators they have never been clearly defined or studied in the laboratory.

An experimental technique using models was developed to produce conical stress waves from an explosive. Several materials with different properties were selected as models for the purpose of determining whether or not conical waves could be generated in all materials.

This investigation showed that conical stress waves do exist under certain conditions, which would closely approximate those present for much …

Thermal Hydrolysis And Structure Studies On Cobalt (Ii) Acetate, Russell J. Hesch

Masters Theses

"The object of this study was to investigate the structure of cobalt (II) acetate, isolated from glacial acetic acid, without recourse to standard x-ray methods"--Introduction, page 1.

Linvill's Model As Applied To P-N Junction Photo-Diodes, Rudy Michael Chittenden

Masters Theses

"The problem undertaken in this study is to present a performance evaluation of Linvill's model as it pertains to the p-n junction photo-diode. The evaluation is performed by comparing the distributed mathematical solutions, the solution obtained using Linvill's lumped model, and the experimental measurement of the transient voltage rise across a photo-diode due to a unit-step pulse of light incident on the junction. Despite the absence of a suitable light source for use in the experimental measurement, it is concluded that Linvill's model provides an excellent means to determine the risetime of a photo-diode. This is provided that the photo-diode …

Design Of Non-Uniform Linear Antenna Arrays With Digitized Spacing And Amplitude Levels, Jack F. Morris

Masters Theses

"Recent developments in space exploration have shown a need for high resolution, high gain antennas. The introduction of non-uniform linear array theory has provided a means by which arrays may be designed to produce narrow main beams with fewer elements than required by uniform arrays. A general theory has not been developed, however, and the design engineer has been left with only trial-and-error methods with which to work. In this study a technique has been developed by which non-uniform antenna arrays may be synthesized to meet a given set of specifications with reasonable accuracy. The elements of the array are …

An Investigation Of Continuous Prestressed Concrete Structures, Ping-Chi Mao

Masters Theses

"This thesis presents an analysis of the behavior of continuous prestressed concrete structures. From this analysis the governing equations for various types of geometry for prestressing cables are derived. The calculation of fixed-end moments due to the prestressing force using the equations derived is quite cumbersome, however, in order to simplify the calculations, design charts are developed. A cable with reverse curvature is analyzed using the design charts. It is shown that the fixed-end moments calculated by neglecting the effect of reverse curvature differ significantly from the fixed-end moments calculated by considering this effect. Hence the effect of reverse curvature …

Tschebyscheff Fitting With Polynomials And Nonlinear Functions, George F. Luffel

Masters Theses

"It is the purpose of this study to survey the properties of the Tschebyscheff polynomials with particular reference to how they are employed as approximants and interpolants. The survey is extended to include the process known as "Tschebyscheff Approximation" or "Tschebyscheff Fitting" of a function by functions other than polynomials. One such fitting technique which will be of particular interest in this study is that of fitting f(x) by the function ab^x + c where a, b, c are real and b ≠ 1. In addition to a survey of the properties of the Tschebyscheff polynomials and of Tschebyscheff …

Evaluation Of Pile Bearing Capacity By Use Of The Wave Equation, Stuart H. Williams

Masters Theses

"The wave equation method of evaluating pile bearing capacity is investigated by using data obtained from a comprehensive pile testing program. Modifications which create a more accurate and realistic approach are made to the method proposed by previous investigators. With the use of these modifications, correlation between observed and computed results is more readily obtained. Selected pile formulas in the empirical, static, and dynamic categories are reviewed so that a direct comparison between these and the wave equation method can be made"--Abstract, page ii.