Digital Commons Network^™

Frontal Brain Injury: Effects On Flexibility, Impulse Control, And Attention, Christopher Matthew O'Hearn

Graduate Theses, Dissertations, and Problem Reports (ETD)

Traumatic Brain Injury (TBI) is defined as an impact to the head, penetration of the skull, or rapid deceleration of the skull, resulting in an alteration of brain function or neurological deficit. Cognitive deficits are common following TBI and often go unresolved due to a lack of effective treatments. These deficits often perseverate into the chronic post injury phase, so the development of rehabilitative strategies is imperative. Behavioral flexibility, impulse control, and attention are a few cognitive processes that are commonly affected by TBI. The current research compares these processes between rats with and without a severe frontal brain injury …

Ultrafast Optical Properties Of La0.7sr0.3mno3 Thin Films, Saeed Yousefi Sarraf

Graduate Theses, Dissertations, and Problem Reports (ETD)

Thin film solids often exhibit different physical properties in the ultra-thin regime. Enhancement of surface to bulk ratio results in the domination of surface/interface related phenomena such as surface recombination. Moreover, in the ultra-thin regime, quantum size and quantum confinement effects can alter the band gap of the system and constrain the strain wave propagation in the thin film. Ultrafast properties of solids can also be drastically altered in the ultra-thin regime due to the aforementioned phenomena. Experimentally, observation of these phenomena is challenging due to the insufficient material to absorb and interact with the electromagnetic wave. This dissertation addresses …

Implications Of Variability Of Electromyographic Measurements For Assessing Localized Muscle Fatigue, Hamad Nasser Alasim

Graduate Theses, Dissertations, and Problem Reports (ETD)

The impact of work-related musculoskeletal disorders (WMSDs) is enormous due to a combination of direct and indirect costs associated with healthcare, lost workdays and human suffering. Because of the established relationship between Localized Muscle Fatigue (LMF) development and WMSDs, and in order to reduce and/or prevent WMSDs in workplaces, different fatigue assessment methods have been developed. Surface Electromyography (SEMG) is a commonly used LMF assessment technique. The SEMG signals are typically analyzed in time and frequency domains to predict LMF based on a relative change with respect to initial, or under no-fatigue conditions. Quantifying such change, however, relies on the …

On Body Mass Index Analysis From Human Visual Appearance, Min Jiang

Graduate Theses, Dissertations, and Problem Reports (ETD)

In the past few decades, overweight and obesity are spreading widely like an epidemic. Generally, a person is considered overweight by body mass index (BMI). In addition to a body fat measurement, BMI is also a risk factor for many diseases, such as cardiovascular diseases, cancers and diabetes, etc. Therefore, BMI is important for personal health monitoring and medical research. Currently, BMI is measured in person with special devices. It is an urgent demand to explore conveniently preventive tools. This work investigates the feasibility of analyzing BMI from human visual appearances, including 2-dimensional (2D)/3-dimensional (3D) body and face data.

Motivated …

Changing Dynamics Of Opioid Overdoses In West Virginia And Impact Of Medication For Opioid Use Disorder And Recurrence Of Overdose On Reducing Mortality Among West Virginia Medicaid Beneficiaries, Zheng Dai

Graduate Theses, Dissertations, and Problem Reports (ETD)

Background

With increasing number of opioid overdoses in West Virginia (WV) in recent years and limited number of people receiving treatment, the dissertation study aims to better understand fatal overdose problems in WV and the impact of medication for opioid use disorder (MOUD) in preventing overdose deaths.

Method

WV drug-related deaths from 2005 to 2018 was used to describe the involvement of fentanyl and FAs. WV Medicaid claim data was analyzed to describe the recurrent opioid overdose and the changes in receipt of MOUD. Further, a Medicaid opioid overdose cohort was created to evaluate the effect of occurrence of recurrent …

The Exploration Of Nanotoxicological Copper And Interspecific Saccharomyces Hybrids, Matthew Joseph Winans Phd

Graduate Theses, Dissertations, and Problem Reports (ETD)

Nanotechnology takes advantage of cellular biology’s natural nanoscale operations by interacting with biomolecules differently than soluble or bulk materials, often altering normal cellular processes such as metabolism or growth. To gain a better understanding of how copper nanoparticles hybridized on cellulose fibers called carboxymethyl cellulose (CMC) affected growth of Saccharomyces cerevisiae, the mechanisms of toxicity were explored. Multiple methodologies covering genetics, proteomics, metallomics, and metabolomics were used during this investigation. The work that lead to this dissertation discovered that these cellulosic copper nanoparticles had a unique toxicity compared to copper. Further investigation suggested a possible ionic or molecular mimicry …

Study On The Thermal Properties Of Concrete Containing Ground Granulated Blast Furnace Slag, Fly Ash And Steel Reinforcement, Bekir Erdem Bas

Graduate Theses, Dissertations, and Problem Reports (ETD)

In this study, the thermal and mechanical properties of two types of concrete were measured. The first type contained ground granulated blast furnace slag, and the second type contained Class F fly ash. The compressive and splitting tensile strength, static elastic modulus, thermal conductivity, adiabatic temperature rise, shrinkage, and compressive creep of the two concretes were measured. Then, the experimental shrinkage and compressive creep results were compared to ACI 209.2R-08 using the material properties of each mix design. Additionally, two semi-adiabatic designs were made and compared with the adiabatic calorimetry measurements. Also, in this study, the thermal conductivity of concrete …

An Interactive Mobile Equipment Task-Training With Virtual Reality, Lazar Zujovic

Graduate Theses, Dissertations, and Problem Reports (ETD)

Improving the quality of equipment training for the Heavy Equipment Operators (HEO) is a critical task in the ever-lasting effort to improve safety and eliminate equipment-related injuries in mining environments. Traditional miner training includes the use of hardcopy documents and video instructions. However, modern mobile and computer technology offers tremendous potential to improve the training process. One major responsibility for the heavy-machine operators is proper machine inspection. Establishing new training methods that utilize modern technologies—such as 360-degree images, videos, and Virtual Reality—and implementing computers for training purposes have a potential to help new operators learn how to conduct proper machine …

Interpretations Of Bicoherence In Space & Lab Plasma Dynamics, Gregory Allen Riggs

Graduate Theses, Dissertations, and Problem Reports (ETD)

The application of bicoherence analysis to plasma research, particularly in non-linear, coupled-wave regimes, has thus far been significantly belied by poor resolution in time, and/or outright destruction of frequency information. Though the typical power spectrum cloaks the phase-coherency between frequencies, Fourier transforms of higher-order convolutions provide an n-dimensional spectrum which is adept at elucidating n-wave phase coherence. As such, this investigation focuses on the utility of the normalized bispectrum for detection of wave-wave coupling in general, with emphasis on distinct implications within the scope of non-linear plasma physics. Interpretations of bicoherent features are given for time series from …

Towards Large Eddy Simulation Of A Staged, Pressurized Oxy-Fuel Combustor, Alain Islas Montero

Graduate Theses, Dissertations, and Problem Reports (ETD)

Identified by the DoE among the novel and transformational technologies, staged-pressurized oxy-fuel combustion (SPOC) is a promising low-cost, low-emission, and highly efficient tool for carbon capture utilization and storage (CCUS), with pulverized coal burning under elevated pressures and low recycled flue gas. A lab-scale SPOC facility, under establishment at Washington University in St. Louis (WUSTL), causes the critical need to develop accurate and reliable computational models to assist the ongoing WUSTL experiments. This constitutes the driving motivation of the present work. Specifically, comprehensive three-dimensional Large-eddy simulations (LES) of the lab-scale SPOC reactor, with most of important characteristics of a multi-phase …

Experimental, Computational And Analytical Studies Towards A Predictive Scenario For A Burning Accident, Furkan Kodakoglu

Graduate Theses, Dissertations, and Problem Reports (ETD)

Historically, accidental gas and dust explosions constitute one of the major hazards to both personnel and equipment in the process industries. The current knowledgebase on such explosions does not provide an acceptable level of risk. Therefore, novel preventive mining/fire safety strategies, based on a rigorous predictive scenario for burning accidents, are critically needed. The present dissertation is devoted to such a predictive scenario, with a particular focus on the flame and pressure evolutions in explosions encountered in an enclosure with or without obstructions. The experimental component of this dissertation comprises a series of experiments on explosion venting. Specifically, the influence …

Comparative Study Of Model-Based And Learning-Based Disparity Map Fusion Methods, Douglas E. Kerr Jr.

Graduate Theses, Dissertations, and Problem Reports (ETD)

Creating an accurate depth map has several, valuable applications including augmented/virtual reality, autonomous navigation, indoor/outdoor mapping, object segmentation, and aerial topography. Current hardware solutions for precise 3D scanning are relatively expensive. To combat hardware costs, software alternatives based on stereoscopic images have previously been proposed. However, software solutions are less accurate than hardware solutions, such as laser scanning, and are subject to a variety of irregularities. Notably, disparity maps generated from stereo images typically fall short in cases of occlusion, near object boundaries, and on repetitive texture regions or texture-less regions. Several post-processing methods are examined in an effort to …

It’S Just Muzak: Music, Activism, And Advertising., Avery Brzobohaty

Graduate Theses, Dissertations, and Problem Reports (ETD)

This thesis builds on recent scholarship explaining the relationships between music, advertising, and society through a series of focused case studies in the clothing industry. Globally ubiquitous and reaching all socioeconomic strata, the fashion industry offers a useful focus because, in addition products, it also sells identity. Fashion is a means for individuals to create and express identity by associating themselves with certain brands and styles that help express social, political, economic, and ethical standings as well as gender, sexuality, race, and religion. This thesis considers the ways that sound and music influence the aesthetic and mood of recent fashion …

An In-Depth Investigation Of The Effects Of Work-Related Factors On The Development Of Knee Musculoskeletal Disorders Among Construction Roofers, Amrita Dutta

Graduate Theses, Dissertations, and Problem Reports (ETD)

Construction roofers have the uppermost likelihood of developing knee musculoskeletal disorders (MSDs). Roofers spend more than 75% of their total working time being restricted to awkward kneeling postures and repetitive motions in a sloped roof setting. However, the combined effect of knee-straining posture, roof slope and their association to knee MSDs among roofers are still unknown. This dissertation aimed to provide empirical evidence of the effects of two roofing work-related factors namely, roof slope and kneeling working posture, on the development of knee MSDs among construction roofers. These two factors were assessed as potential to increase knee MSD risks in …

Impact Of Particle Injection On Gas Flow At Elevated Pressure: A Numerical Study, Ansan Pokharel

Graduate Theses, Dissertations, and Problem Reports (ETD)

Modeling of a turbulent two-phase gaseous-solid flow still faces challenges. The present study is devoted to two-phase flow in an annular pipe (hollow cylinder) operating at an elevated pressure of 15 bar and moderate Reynolds numbers of circa 6 x 10³. The influence of the various factors – such as the particle loading, the interaction between the phases, and turbulent dispersion – on the flow dynamics is systematically studied by means of the computational simulation employing the ANSYS FLUENT commercial package. To be specific, particle loading with a volumetric fraction of 1.2 % is defined as high particle …

Development Of An Activity-Based Windowing Approach To Evaluate Real-World Nox Emissions From Modern Medium And Heavy-Duty Diesel Trucks, Rasik Pondicherry

Graduate Theses, Dissertations, and Problem Reports (ETD)

The introduction of in-use emissions regulations by the United States Environmental Protection Agency (U.S.EPA) requires medium-duty (MD) and heavy-duty (HD) engine manufacturers to demonstrate emissions compliance during in-fleet operation. In the United States (U.S.), the Not-to-Exceed (NTE) method is used to evaluate real-world emissions compliance from on-highway MD and HD trucks. Regulatory agencies, engine manufacturers and research entities have identified that the NTE method incorporates numerous exclusions and evaluates emissions compliance only under selective operating conditions that are favorable for the selective catalytic reduction (SCR) system to reduce oxides of nitrogen (NOx) emissions efficiently. Such operation is typically encountered only …

Route Planning For Long-Term Robotics Missions, Christopher Alexander Arend Tatsch

Graduate Theses, Dissertations, and Problem Reports (ETD)

Many future robotic applications such as the operation in large uncertain environment depend on a more autonomous robot. The robotics long term autonomy presents challenges on how to plan and schedule goal locations across multiple days of mission duration. This is an NP-hard problem that is infeasible to solve for an optimal solution due to the large number of vertices to visit. In some cases the robot hardware constraints also adds the requirement to return to a charging station multiple times in a long term mission. The uncertainties in the robot model and environment require the robot planner to account …

Evaluation Of Test Specimen Geometry Of Asphalt Mixes Tested With The Asphalt Mixture Performance Tester, Abha Dwivedy

Graduate Theses, Dissertations, and Problem Reports (ETD)

Asphalt concrete, AC, is a heterogeneous material that is modeled as a homogeneous material. The disparity between material structure and theory presents issue with performance testing with test sample geometries, resulting in variability. The purpose of this research is to develop appropriate sample geometry for AMPT test for accurate characterization of asphalt mix and ease of testing.

Four sample geometries were fabricated for three mix types. All specimens are fabricated at 7%0.5% air voids and tested for AMPT tests. The effect of sample geometry was statistically analyzed using laboratory test results and performance predictions using FlexPAVE. For ranking analysis all …

Interoperability Of Ip-Based Cameras, Faythe C. Maston

Graduate Theses, Dissertations, and Problem Reports (ETD)

In this day and age of advancing technology and increasing crime, more and more citizens are investing in technology to increase their personal security. One such technology is the use of home-based IP security systems. These systems are comprised of one or more IP-based security cameras with owners preferring to have a way to view all camera feeds at once. Since not all security cameras are made to interact with each other, it is necessary to find a program that allows a user to view all security cameras at once, regardless of what brand of cameras they use. After researching, …

A Machine Learning And Data-Driven Prediction And Inversion Of Reservoir Brittleness From Geophysical Logs And Seismic Signals: A Case Study In Southwest Pennsylvania, Central Appalachian Basin, Tobi Micheal Ore

Graduate Theses, Dissertations, and Problem Reports (ETD)

In unconventional reservoir sweet-spot identification, brittleness is an important parameter that is used as an easiness measure of production from low permeability reservoirs. In shaly reservoirs, production is realized from hydraulic fracturing, which depends on how brittle the rock is–as it opens natural fractures and also creates new fractures. A measure of brittleness, brittleness index, is obtained through elastic properties of the rock. In practice, problems arise using this method to predict brittleness because of the limited availability of elastic logs.

To address this issue, machine learning techniques are adopted to predict brittleness at well locations from readily available geophysical …

State Regulatory Heterogeneity And Clean Water Act Compliance, Quinn R. Beeson

Graduate Theses, Dissertations, and Problem Reports (ETD)

This research evaluates the impact of state regulations regarding Clean Water Act (CWA) compliance on wastewater and drinking water violations in the continental United States from 2007 to 2017. Using data collected from the Environmental Protection Agency (EPA), community characteristics and state regulations are analyzed for their effects on CWA compliance. We use count data analysis techniques and annual county-level data on CWA and Safe Drinking Water Act (SDWA) violations from wastewater and drinking water facilities in the United States. The results show that total violations are higher when an additional state CWA regulation is implemented. One year after a …

Capital Equipment Upgrade Strategy In The Context Of Servitization, Muztoba Ahmad Khan

Graduate Theses, Dissertations, and Problem Reports (ETD)

Building on manufacturing servitization and Product-Service Systems (PSS) business models, the midlife equipment upgrade services introduce promising alternative to traditional equipment replacement, which is often capital intensive and time consuming. Midlife upgrade describes the process of improving the performance of and adding new functional capabilities into equipment during their active usage period by embedding technological innovation while satisfying evolving customers’ preferences over time. This strategy, however, has thus far been discussed primarily from a conceptual perspective in literature, and the state of the art lacks empirical evidence regarding the potential and outcome of successful midlife upgrades. Additionally, explorative studies report …

Shaping Urban Spaces To Fit Into Religious Boundaries Through Landscape, Niharika Alahari

Graduate Theses, Dissertations, and Problem Reports (ETD)

In India, rivers are considered a sacred entity for Hindus and temples on the banks of rivers are a common sight in Indian architectural character. Devotees come to worship and perform small ceremonies on ghats, banks of the river, to the gods and ancestors. This is considered a part of an important ritual prior to entering the temple associated with the river. One such river in South India where this practice occurs, is the Krishna river in Vijayawada, an important pilgrimage center for devotees and the location for this study. Although this practice is a daily occurrence and one hundred …

Evaluation Of Process And Economic Feasibility Of Implementing A Topping Cycle Cogeneration System, Unique Karki

Graduate Theses, Dissertations, and Problem Reports (ETD)

Industrial applications that require steam for their end-uses generally utilize steam boilers that are at higher size than what is typically required. Similarly, gas turbine-based power plants corroborate the gas turbine system and eventually relieve the exhaust into the atmosphere. These facilities include food, paper, chemicals, refining, and primary metal manufacturing industries. This research focuses on the scope of a topping cycle combined heat and power (CHP) system by pushing the load on the boiler to a higher limit, or a gas turbine operation in place of a boiler system for a topping cycle CHP and its economic feasibility by …

Techno-Economic Feasibility Of Solar Powered Electric Vehicle Charging Stations In West Virginia, Houssem Eddine Younes

Graduate Theses, Dissertations, and Problem Reports (ETD)

This project explores the techno-economic feasibility of installing a photovoltaic (PV) system to power electric vehicle (EV) charging stations in West Virginia. A case study of a parking garage charging station is considered. The PV system performance and economic feasibility are assessed for two different system configurations and two financial scenarios. Two system variations one including PV only and another with on-site storage battery are modelled using the System Advisor Model (SAM) developed by the National Renewable Energy Laboratory. Initial technical specifications of the PV system, battery system and EV chargers were selected as a reference case. Through parametric simulation, …

On Demand Nanoscale Phase Manipulation Of Vanadium Dioxide By Scanning Probe Lithography, Dustin Schrecongost

Graduate Theses, Dissertations, and Problem Reports (ETD)

This dissertation focuses on nanoscale phase manipulations of Vanadium Dioxide. Nanoscale control of material properties is a current obstacle for the next generation of optoelectronic and photonic devices. Vanadium Dioxide is a strongly correlated material with an insulator-metal phase transition at approximately 345 K that generates dramatic electronic and optical property changes. However, the development of industry device application based on this phenomenon has been limited thus far due to the macroscopic scale and the volatile nature of the phase transition. In this work these limitations are assessed and circumvented.

A home-built, variable temperature, scanning near-field optical microscope was engineered …

Cu-Based Electrocatalysts For Carbon Dioxide Conversion To Value-Added Chemicals, Qingyang Li

Graduate Theses, Dissertations, and Problem Reports (ETD)

Massive usage of fossil fuel has being causing considerable emission of CO₂, which increases the temperature of the planet and greatly threaten human living environment, such as soil degradation, lower agricultural productivity, desertification, less biodiversity, fresh-water reduction, ocean acidification, ozone sphere destruction, etc. A number of technologies are being developed to reduce the CO₂ amount, however, all existing technologies except utilizing CO₂ as a feedstock, are hardly to essentially close the anthropogenic carbon loop. Currently, considering the economy and operability, electroreduction of CO₂ seems to be the most promising strategy to convert CO₂ to …

Investigating Effects Of Carbonate Minerals On Shale- Hydraulic Fracturing Fluid Interactions In The Marcellus Shale, Brennan Matthew Ferguson

Graduate Theses, Dissertations, and Problem Reports (ETD)

Natural gas extracted from tight shale formations, such as the Marcellus Shale, represent an important and developing front in energy exploration. By fracturing these formations using pressurized fracturing fluid, previously unobtainable hydrocarbon reserves may be tapped. While pursuing this resource hydraulic fracturing operations leave chemically complex fluids in the shale formation for at least two weeks. This provides a substantial opportunity for the hydraulic fracturing fluid (HFF) to react with the shale formation at reservoir temperature and pressure. In this study, we investigated the effects of the carbonates on shale-HFF reactions with a focus on the Marcellus Shale. We determined …

Upstream Tailings Dam - Liquefaction, Mladen Dragic

Graduate Theses, Dissertations, and Problem Reports (ETD)

The collapse of Dam I, tailings dam, at Vale S.A.’s (“Vale”) of the Córrego do Feijão Iron Ore Mine in Brazil was an accident that caused over 270 casualties and made irreparable damage to the surrounding environment. The exact reason for the failure is not known however, liquefaction was suspected to be the most influencing factor in the failure. Liquefaction failure of impoundment is increasing concern in the mining community and especially mine planners who will have to design and build the tailings dam. Different design methods are available with varied degree of challenges. Upstream construction methods, as one of …

Experiences Of Arts And Humanities Students Engaging In Undergraduate Research, Carinna F. Ferguson

Graduate Theses, Dissertations, and Problem Reports (ETD)

Deemed an important pedagogical tool by the Boyer Commission Report more than 20 years ago, undergraduate research (UR) has been found to increase students’ academic performance, retention, and pursuance of higher degrees. However, much of the existing literature on UR has focused primarily on student participation outcomes in Science, Technology, Engineering, and Mathematics (STEM) fields while disregarding those in other concentrations. The purpose of this study was to understand the experiences of arts and humanities students participating in UR by describing (1) their research activities, and (2) the meaning and value they assign to research. Two sets of interviews were …