Digital Commons Network^™

Heat Set Creases In Polyethylene Terephthalate (Pet) Sheets To Enable Origami-Based Applications, Brandon Sargent, Nathan Brown, Brian D. Jensen, Spencer P. Magleby, William G. Pitt, Larry L. Howell

Faculty Publications

Polyethylene terephthalate (PET) sheets show promise for application in origami-based engineering design. Origami-based engineering provides advantages that are not readily available in traditional engineering design methods. Several processing methods were examined to identify trends and determine the effect of processing of PET sheets on the crease properties of origami mechanisms in PET. Various annealing times, temperatures, and cooling rates were evaluated and data collected for over 1000 samples. It was determined that annealing temperature plays the largest role in crease response. An increase in the crystallinity of a PET sheet while in the folded state likely increases the force response …

A Design Approach To Fully Compliant Multistable Mechanisms Employing A Single Bistable Mechanism, Yanjie Gou, Guimin Chen, Larry L. Howell

Faculty Publications

A fully compliant multistable mechanism is a monolithic structure that is capable of staying at multiple positions without power input, and has many applications including switches, valves, positioners. However, it is difficult to design such a mechanism because of the complexities of the multistable behavior, the practical stress limits and the buckling constraints. This paper discusses the design approach for fully compliant multistable mechanisms which employs a single bistable mechanism and several end-effectors connected in series. The force-displacement characteristics of the end-effectors are derived using the pseudo-rigid-body model. The design approach to the fully compliant multistable mechanism is provided to …

Rigidly Foldable Thick Origami Using Designed-Offset Linkages, Robert J. Lang, Nathan Brown, Brian Ignaut, Spencer P. Magleby, Larry L. Howell

Faculty Publications

We present new families of thick origami mechanisms that achieve rigid foldability and parallel stacking of panels in the flat-folded state using linkages for some or all of the hinges between panels. A degree-four vertex results in a multi-loop eight-bar spatial mechanism that can be analyzed as separate linkages. The individual linkages are designed so that they introduce offsets perpendicular to the panels that are mutually compatible around each vertex. This family of mechanisms offers the unique combination of a planar unfolded state, parallel-stacked panels in the flat folded state, and kinematic single-degree-of-freedom motion from the flat- unfolded to the …

On The Modeling Of A Contact-Aided Cross-Axis Flexural Pivot, Pietro Bilancia, Giovanni Berselli, Spencer P. Magleby, Larry L. Howell

Faculty Publications

This paper reports the study of a planar Cross-Axis Flexural Pivot (CAFP) comprising an additional contact pair. The proposed device turns useful for applications requiring a revolute joint that behaves differently when deflecting clockwise/anti-clockwise. The presence of the contact pair reduces the free length of one flexures, resulting in a considerable increment of the overall joint stiffness. The pivot behaviour is investigated, for different load cases, via the ChainedBeam-Constraint Model (CBCM), namely an accurate method to be applied in large deflection problems. A framework comprising Matlab and ANSYS is developed for testing the CAFP performances in terms of rotational stiffness, …

Limits Of Extramobile And Intramobile Motion Of Cylindrical Developable Mechanisms, Jared Butler, Larry L. Howell, Spencer P. Magleby, Jacob Greenwood

Faculty Publications

Mechanisms that can both deploy and provide motions to perform desired tasks offer a multifunctional advantage over traditional mechanisms. Developable mechanisms (DMs) are devices capable of conforming to a predetermined developable surface and deploying from that surface to achieve specific motions. This paper builds on the previously identified behaviors of extramobility and intramobility by introducing the terminology of extramobile and intramobile motion, which define the motion of developable mechanisms while interior and exterior to a developable surface. The limits of motion are identified using defined conditions. It is shown that the more difficult of these conditions to kinematically predict may …

Analysis Of The Rigid Motion Of A Conical Developable Mechanism, Mckell Woodland, Michelle Hsiung, Erin L. Matheson, C Alex Safsten, Jacob Greenwood, Denise M. Halverson, Larry L. Howell

Faculty Publications

We demonstrate analytically that it is possible to construct a developable mechanism on a cone that has rigid motion. We solve for the paths of rigid motion and analyze the properties of this motion. In particular, we provide an analytical method for predicting the behavior of the mechanism with respect to the conical surface. Moreover, we observe that the conical developable mechanisms specified in this paper have motion paths that necessarily contain bifurcation points which lead to an unbounded array of motion paths in the parameterization plane.

Load-Displacement Characterization In Three Degrees Of Freedom For General Let Arrays, Nathan A. Pehrson, Pietro Bilancia, Spencer P. Magleby, Larry L. Howell

Faculty Publications

Lamina emergent torsion (LET) joints for use in origami-based applications enables folding of panels. Placing LET joints in series and parallel (formulating LET arrays) opens the design space to provide for tunable stiffness characteristics in other directions while maintaining the ability to fold. Analytical equations characterizing the elastic load-displacement for general serial-parallel formulations of LET arrays for three degrees of freedom are presented: rotation about the desired axis, in-plane rotation, and extension/compression. These equations enable the design of LET arrays for a variety of applications, including origami-based mechanisms. These general equations are verified using finite element analysis and, to show …

Zero Torque Compliant Mechanisms Employing Pre-Buckled Beams, Pietro Bilancia, Samuel Porter Smith, Giovanni Berselli, Spencer P. Magleby, Larry L. Howell

Faculty Publications

The concept of a statically balanced mechanism with a single rotational degree of freedom is presented. The proposed device achieves static balancing by combining positive stiff- ness elements and negative stiffness elements within a nuclear domain. Two designs are discussed. The first is composed of an Archimedean spiral and two pinned-pinned pre-buckled beams. The overall mechanism is modeled via an analytical approach and the element dimensions are optimized. The optimal configuration is then tested through finite element analysis (FEA). A second approach replaces the spiral beam with elastic custom-shaped spline beams. An FEA optimization is performed to determine the shape …

Conceptualizing Stable States In Origami-Based Devices Using An Energy Visualization Approach, Jacob Greenwood, Larry L. Howell, Alex Avila, Spencer P. Magleby

Faculty Publications

In many origami-based applications, a device needs to be maintained in one or more fold states. The origami stability integration method (OSIM) presented in this paper pro- vides an approach for graphically combining various techniques to achieve stability. Existing stability techniques are also categorized into four groups based on whether they are intrinsic or extrinsic to the origami pattern and whether they exhibit gradual or non-gradual energy storage behaviors. These categorizations can help designers select appropriate techniques for their applications. The paper also contains de- sign considerations and resources for achieving stability. Finally, two case studies are presented that use …

Effects Of Other People's Facial Emotional Expression On Consumers’ Perceptions Of Chocolate Chip Cookies Containing Cricket Protein, Yupeng Gao, Pitchayapat Chonpracha, Bin Li, Witoon Prinyawiwatkul

Faculty Publications

Abstract: Edible insects are recognized as a potential alternative and sustainable source of high-quality protein for the human diet. Entomophagy is highly related to negative emotions that may cause reluctance to adopt insects as food in Western countries. During human interaction, a person's facial emotional expression (FEE) may influence other people's emotional responses. A person's emotional state may affect his/her food preference and food choice. Understanding how other people's FEE would affect consumers’ emotional profiles, liking, and subsequent willingness to try (WTT) and purchase intent (PI) toward insect-containing food products may help increase the acceptance of entomophagy. This study identified …

White House Memo And Faculty Cvs, Ellen Amatangelo

Faculty Publications

This information was presented to the Subject Librarians Council. The "Memorandum for the Heads of Executive Departments and Agencies" from the Executive Office of the President concerning "Ensuring Free, Immediate, and Equitable Access to Federally Funded Research" was discussed. The presentation also includes a portion on how faculty publications are added the BYU's institutional repository.

Measured Spectral, Directional Radiative Behavior Of Corrugated Surfaces, Kyle S. Meaker, Ehsan Modfidipour, Matthew R. Jones, Brian D. Iverson

Faculty Publications

Spacecraft thermal control is entirely reliant upon radiative heat transfer with its surroundings for tem- perature regulation. Current methods are often static in nature and do not provide dynamic control of radiative heat transfer. As a result, modern spacecraft thermal control systems are typically ‘cold-biased’ with radiators that are larger than necessary for many operating conditions. Deploying a variable radiator as a thermal control technique in which the projected surface area can be adjusted to provide the appro- priate heat loss for a given condition can reduce unnecessary heat rejection and reduce power require- ments. However, the radiative behavior of …

Evaluation Of A Droplet Spraying/Misting System To Enhance Leachate Evaporation And Reduce Leachate Treatment Costs: A Case Study At The Three Rivers Solid Waste Authority Landfill, Kaitlen Drafts, Suzie Boxman, Scott Ribes, Mike Terry, Bryan Staley, Nicole Berge

Faculty Publications

Three Rivers Solid Waste Authority (TRSWA) operates a MSW landfill outside Jack-son, South Carolina at which leachate is stored in a collection pond then trucked to a local wastewater treatment plant (WWTP) for treatment. This landfill operates a droplet spraying/misting system (referred to as the Lilypad system) to enhance leachate evaporation and ultimately reduce the quantity of leachate in the pond that requires subsequent treatment. Little work investigating the efficacy in using such a system to enhance leachate evaporation has been reported. The overall goal associated with this study was to quantify the amount of evaporation enhanced by the droplet …

The First Amendment And The Second Sex, Cristina Carmody Tilley

Faculty Publications

Modern American law describes speech in stereotypically masculine terms: it is a “marketplace” where participants “joust” for dominance. Predictably, today’s speech jurisprudence can be hostile to the female voice, implicitly condoning gendered death threats, rape threats, doxing, and trolling as the necessary price of a vibrant national discourse. Unpredictably, the American Civil Liberties Union (“ACLU”) and its leading women drafted the blueprint for this modern speech edifice. The First Amendment and the Second Sex traces the ACLU campaign to dismantle a nineteenth-century speech regime that silenced some men while protecting many women. And it suggests that ACLU feminists—intent on securing …

Dynamic Multi-Dimensional Numerical Transport Study Of Lithium-Ion Battery Active Material Microstructures For Automotive Applications, Joseph S. Lopata, Taylor R. Garrick, Fengkun Wang, Han Zhang, Yangbing Zeng, Sirivatch Shimpalee

Faculty Publications

In support of GM’s traction battery efforts, we derived and implemented a method to describe the electrochemical performance of a battery cell considering the nuances of the electrode microstructure at the anode and the cathode and the corresponding impact on the electrochemical transport in the solid and liquid phases. To assess the capability of the method, we compared model results from the microstructure framework with the commonly used continuum-level porous electrode model, commonly referred to as the pseudo-2-dimensional model, or the Newman Model. The microstructure modeling framework was applied to simulate the electrochemical and transport processes within the battery cell …

Investigation Of Electrically Isolated Capacitive Sensing Skins On Concrete To Reduce Structure/Sensor Capacitive Coupling, Emmanuel Ogunniyi, Alexander Vareen, Austin Downey, Simon Laflamme, Jian Li, Caroline Bennett, William Collins, Hongki Jo, Alexander Henderson, Paul Ziehl

Faculty Publications

Damage to bridges can result in partial or complete structural failures, with fatal consequences. Cracks develop in concrete infrastructure from fatigue loading, vibrations, corrosion, or unforeseen structural displacement. Effective long-term monitoring of civil infrastructure can reduce the risk of structural failures and potentially reduce the cost and frequency of inspections. However, deploying structural health monitoring technologies for crack detection on bridges is expensive, especially long-term, due to the density of sensors required to detect, localize, and quantify cracks. Previous research on soft elastomeric capacitors (SECs) has shown their viability for low-cost monitoring of cracks in transportation infrastructure. However, when deployed …

Sootlib: A Soot Model Library For Combustion Simulation, Victoria B. Stephens, Joshua Bedwell, Alex J. Josephson, Keturah Oldham, David O. Lignell

Faculty Publications

Soot formation in combustion is an important process that affects radiative heat transfer, flame temperatures, and emissions with health and environmental impacts. Soot formation involves complex chemistry for nucleation, growth, oxidation, and coagulation processes. The soot particles vary widely in size and accurate modeling requires representation of the particle size distribution (PSD). Modeling soot is not trivial, and is only one of several physical processes active in combustion systems. This paper presents a software package called SootLib, which is an open-source library for modeling soot formation and other aerosol systems. SootLib is written in C++, is documented with Doxygen, and …

A Comparative Study Of Texas–Mexico Border Vs. Non-Border Students’ Achievement On High-Stakes State Test: A Propensity Score Matching Method, Zhuoying Wang, Shifang Tang, Feng Luo

Faculty Publications

Texas–Mexico border region is a unique place where two countries and culture connected. We sought to investigate border school district students’ academic performance as measured by Texas standardized test: the State of Texas Assessments of Academic Readiness (STAAR). To do so, we first used propensity score matching (PSM) techniques to analyze data collected from a public database: Texas Assessment Management System (TAMS). Specifically, we provided a PSM analysis of nonborder and border school districts regarding their demographic characteristics [i.e., identified as a rural district, percentage of economically disadvantaged (ED) students, percentage of English learners (ELs), mobility rate, instructional hours, principal …

Maternal And Infant Outcomes Of Syrian And Palestinian Refugees, Lebanese And Migrant Women Giving Birth In A Tertiary Public Hospital In Lebanon: A Secondary Analysis Of An Obstetric Database, Stephen J. Mccall, Tanya C. El Khoury, Hala Ghattas Ph.D., Shady Elbassuoni, Mhd Hussein Murtada, Zeina Jamaluddine, Christine Haddad, Aya Hussein, Amina Krounbi, Jocelyn Dejong, Janoub Khazaal, Rabih Chahine

Faculty Publications

Objectives This study aims to assess whether the characteristics, management and outcomes of women varied between Syrian and Palestinian refugees, migrant women of other nationalities and Lebanese women giving birth at a public tertiary centre in Beirut, Lebanon.

Methods This was a secondary data analysis of routinely collected data from the public Rafik Hariri University Hospital (RHUH) between January 2011 and July 2018. Data were extracted from medical notes using text mining machine learning methods. Nationality was categorised into Lebanese, Syrian, Palestinian and migrant women of other nationalities. The main outcomes were diabetes, pre-eclampsia, placenta accreta spectrum, hysterectomy, uterine rupture, …

Team Moms And Tiger Moms: Formal Sports Participation And Closeness To Mothers: Supplementary Materials, Tom R. Leppard, Mikaela J. Dufur

Faculty Publications

Recent research highlights that relationships with parents are among those strengthened when youth play sports. This recent work, however, largely focuses on fathers, arguing that because of the persistent emphasis on masculinity in sporting spaces, youth sports might be especially effective at facilitating stronger relationships between fathers and children. This chapter asks how the mother-child dyad is influenced by youth formal participation in sports during their adolescence, including whether these patters differ for daughters and sons. The intense time investments the entire family unit incurs to support youth sport participation might be borne primarily by mothers; this in turn might …

Search For Rare Decays B+→D (*)+SΗ, D (*)+ SK̅, D+ Η, And D+ K0, M. Kumar, V. Bhardwaj, K. Lalwani, I. Adachi

Faculty Publications

We present a study of rare decay modes B+→D⁺_Sh⁰, B+→D^*+_S h⁰, and B+→D+h⁰, where h⁰ denotes the neutral meson η or K⁰, using a data sample of (772±10)×10⁶   BB̅ events produced at the Υ(4S) resonance. The data were collected by the Belle detector operating at the asymmetric-energy KEKB collider. We find no evidence for these decays, so we set upper limits at the 90% confidence level on the branching fractions of B+→D⁺ _S h⁰, D^*+ _S h⁰, …

Turbulent Mixing Simulation Using The Hierarchical Parcel-Swapping (Hips) Model, Tommy Starick, Masoomeh Behrang, David O. Lignell, Heiko Schmidt, Alan R. Kerstein

Faculty Publications

Turbulent mixing is an omnipresent phenomenon that permanently affects our everyday life. Mixing processes also
plays an important role in many industrial applications. The full resolution of all relevant flow scales often poses a major challenge to the numerical simulation and requires a modeling of the small-scale effects. In transported Probability Density Function (PDF) methods, the simplified modeling of the molecular mixing is a known weak point. At this place, the Hierarchical Parcel-Swapping (HiPS) model developed by A.R. Kerstein [J. Stat. Phys. 153, 142-161 (2013)] represents a computationally efficient and novel turbulent mixing model. HiPS simulates the effects of turbulence …

Three- And Four-Point Functions In Cpt -Even Lorentz-Violating Scalar Qed, Brett Altschul, L. C.T. Brito, J. C.C. Felipe, S. Karki, A. C. Lehum, A. Yu Petrov

Faculty Publications

The renormalization of quantum field theories usually assumes Lorentz and gauge symmetries, besides the general restrictions imposed by unitarity and causality. However, the set of renormalizable theories can be enlarged by relaxing some of these assumptions. In this work, we consider the particular case of a CPT-preserving but Lorentz-breaking extension of scalar QED. For this theory, we calculate the one-loop radiative corrections to the three- and four-point scalar-vector vertex functions, at the lowest order in the Lorentz-violation parameters, and we explicitly verify that the resulting low-energy effective action is compatible with the usual gauge invariance requirements. With these results, we …

Changes In The Mechanical Performance Of An Ortho-Planar Spring After Aging Tests, Lucas F. L. Santos, Larry L. Howell, Jose J. R. D’Almeida

Faculty Publications

This paper analyzed an ortho-planar spring (OPS) compliant mechanism and evaluated its mechanical performance after hygrothermal and ultraviolet radiation aging tests. The aging analysis performed here addresses the performance of compliant mechanisms after aging processes which can help inform the design of future compliant mechanisms. ASTM D638 tensile test type I samples were also submitted to aging to serve as a comparison for OPS samples. The samples were submitted to three different kinds of aging conditions, namely water immersion, oil immersion, and ultraviolet radiation. In conclusion, tensile samples showed significant statistical changes in Young's modulus and elongation at break, whereas …

Comparative-Effectiveness Of Oral Beta-Lactams And Fluoroquinolones For Stepdown Therapy In Patients With Enterobacterales Bloodstream Infections: A Retrospective Cohort Study, Lauren Bjork Ph.D., Teri Hopkins Ph.D., Linda Yang Ph.D., Chengwen Teng Pharm.D., Ph.D., Xavier Jones Bs, Jose Cadena, Elizabeth Walter, Christopher R. Frei Pham.D., Ms

Faculty Publications

Background: This study compares treatment failure for patients who received oral beta-lactams (BLs) and fluoroquinolones (FQs) for stepdown treatment of Enterobacterales bloodstream infections (BSIs).

Methods: We conducted a single-center, retrospective, age- and sex-matched, cohort study, at a Veterans Affairs (VA) hospital in South Texas. Eligible patients were at least 18 years of age with a monomicrobial BSI treated with a single oral BL or FQ antibiotic. Treatment failure was defined as recurrence or all-cause mortality within 90 days of documented BSI. Bivariate (chi-square, Fisher's Exact, and Wilcoxon Rank Sum) and multivariate (logistic regression) statistical tests were used to compare groups. …

Why & What Attorneys Should Know About Community Resources Available To Survivors Of Domestic Violence, Kristen Clarke Kellems, Kristen Clarke Kellems

Faculty Publications

This CLE program explains why attorneys representing survivors of domestic violence should understand and use community resources as part of effective legal advocacy. Leaving an abusive relationship can create immediate risks involving safety, housing, finances, transportation, childcare, and emotional health. These barriers can affect a survivor’s stability, decision-making, and ability to participate effectively in a legal case. Drawing on survivor and volunteer-attorney perspectives, the presenters show how appropriate referrals can strengthen both client outcomes and legal representation while keeping attorneys within their professional role.

The program surveys Utah resources available through 211, the Department of Workforce Services, domestic violence shelters, …

Membrane-Enhanced Lamina Emergent Torsional Joints For Surrogate Folds, Guimin Chen, Spencer P. Magleby, Larry L. Howell

Faculty Publications

Lamina emergent compliant mechanisms (including origami-adapted compliant mechanisms) are me- chanical devices that can be fabricated from a planar material (a lamina) and have motion that emerges out of the fabrication plane. Lamina emergent compliant mechanisms often exhibit undesirable para- sitic motions due to the planar fabrication constraint. This work introduces a type of lamina emergent torsion (LET) joint that reduces parasitic motions of lamina emergent mechanisms (LEMs), and presents equations for modeling parasitic motion of LET joints. The membrane joint also makes possible one-way joints that can ensure origami-based mechanisms emerge from their flat state (a change point) into …

Symmetric Equations For Evaluating Maximum Torsion Stress Of Rectangular Beams In Compliant Mechanisms, Guimin Chen, Larry L. Howell

Faculty Publications

There are several design equations available for calculating the torsional compliance and the maximum torsion stress of a rectangular cross-section beam, but most depend on the relative magnitude of the two dimensions of the cross-section (i.e.,the thickness and the width). After reviewing the available equations, two thickness-to-width ratio independent equations that are symmetric with respect to the two dimensions are obtained for evaluating the maximum torsion stress

of rectangular cross-section beams. Based on the resulting equations, outside lamina emergent torsional joints are analyzed and some useful design insights are obtained. These equations, together with the previous work on symmetric equations …

Strange Statutory Foundations And Terribly Tricky Treasures In Trust, Thomas Simmons

Faculty Publications

This paper summarizes two distinct topics: statutory foundations and a varied collection of unique and potentially troubling kinds of assets that might be held by fiduciaries such as trustees. Statutory foundations have recently been legislative approved in two states; Wyoming and New Hampshire and they represent new and interesting planning opportunities for estate planners. Tricky assets can range from the difficult-to-inventory (such as comic books and baseball cards) to outright contraband.

Active Control Of Equilibrium, Near-Equilibrium, And Far-From-Equilibrium Colloidal Systems, Mark N. Mcdonald, Qinyu Zhu, Walter F. Paxton, Cameron K. Peterson, Douglas R. Tree

Faculty Publications

The development of top-down active control over bottom-up colloidal assembly processes has the potential to produce materials, surfaces, and objects with applications in a wide range of fields spanning from computing to materials science to biomedical engineering. In this review, we summarize recent progress in the field using a taxonomy based on how active control is used to guide assembly. We find there are three distinct scenarios: (1) navigating kinetic pathways to reach a desirable equilibrium state, (2) the creation of a desirable metastable, kinetically trapped, or kinetically arrested state, and (3) the creation of a desirable far-from-equilibrium state through …