Digital Commons Network^™

Computer Simulation Of Electro-Static Field Potential To Study The Effect Of An Animal On The Electric Field Between Two Charged Plates, Shekhar Gajanan Potdar

Theses

This thesis deals with plotting of equipotential lines in an electrostatic field created by two parallel charged plates. Between the plates lies a dielectric cage inside which an animal (rat) is kept, on whom anatomical tests are to be carried out after exposing it to a certain electric field intensity for a given period. Values of the actual field to which the animal is exposed can hardly be obtained experimentally. Computer simulation in this case becomes a powerful tool. Starting with the uniform field ideally created between two parallel plates, it is then neccesary to find the effect of the …

An Investigation Of Characteristics Of Blood Velocity In A Simulated Circulation System, Yung-Gang Wu

Theses

The major objective of this thesis is to find the relationship between the blood velocity and the stenosis of the vessel. Tests were performed with different degrees of stenosis at varied logitudinal positions from the testing probe in the vessel of a Z-80 microprocessor controlled artificial circulation system.

Three methods were used to detect the velocity in the vessel: continuous wave Doppler, Pulse Doppler, and a hot-film device. The first method can get the average velocity, while the latter two have the capability to find a velocity profile, and all are important indicators to the arterial occlusion phenomenon.

An analysis …

A Systematic Program For The Management Of A Sanitation Function In The Food Industry, John Joseph Sprainitis

Theses

The sanitation of food processing and packaging facilities is a labor intensive activity. As with any labor intensive operation, effective planning and control of the manpower is necessary. The more effective tie management, the more effective and productive the manpower will be.

As the effectiveness of the management improves, the cost effectiveness of the manpower will improve.

In dealing with the manufacturing of foods, there are numerous government regulations, of which sanitation plays a key role. Misunderstanding the impact of these regulations, and either over- or under-reacting to them, can result in unnecessary costs or severe problems.

In order to …

Flow In A Channel With An Abrupt Change In Area : Finite Element Method, Ching-Fu Yu

Theses

Steady flow with an incompressible non-viscous fluid in a two-dimensional channel with an abrupt change in the width of its flow passage has been studied with a finite element method and a complex potential method.

The flow problem was solved with the use of an existing finite element program, FLOW2, in terms of the velocity potential and the stream function. The general procedure of solving problem by finite element method and the user's guide of FLOW2 program are presented in this thesis.

A computer program, EXACT, has been written for the exact solution based on the complex potential method to …

Management Improvement Study Of The Engineering Function In A Converting Industry Company, James John Slovak

Theses

A study was made to determine if the profitability of a converting company could be improved by expanding its engineering department. Process challenges were examined along with the present engineering function to determine difficulties. A case study of capital budget projects completed in the last three years revealed that potential savings were lost due to late and incomplete projects. The conclusion is that profitability can De increased through process control improvements and more timely completion of capital projects by expanding the present engineering department.

Plate Buckling Under Biaxial Patch Loading, Herli Surjanhata

Theses

This thesis is concerned with the buckling of rectangular plate-shaped elements under biaxial compressive loading with patch loading along one pair of opposite edges. The loading along the other edges is continuous but the discontinuous loading covers different patches along opposite edges. All the applied loads are uniformly distributed. The critical buckling load of this type of plate element is an important factor in the optimal design of many types of thin-walled structures. Frequently the nature of the problem prohibits an exact or even a general form of solution, thus dictating a numerical approach.

The problem has been attacked to …

Implementing A Preventive Maintenance Program In A Pharmaceutical Manufacturing Plant, Daniel J. Shatynski

Theses

The goal of Preventive Maintenance is to reduce operating costs through greater equipment availability and lower downtime costs. Its intention is also to reduce the frequency and severity of corrective maintenance. A case study of a chemical manufacturing plant in the pharmaceutical industry is reviewer and symptoms are illustrated for purposes of definition. The development and implementation of a Preventive Maintenance program for this chemical manufacturing plant is proposed.

Implementation Of Dbase Ii In Inventory Management By A Small Firm, Shih-Chieh Wang

Theses

No abstract provided.

The Determination Of So3 And So2 In Stack Gas By Collection In A Buffered Formaldehyde Solution, Peter Frank Romeo

Theses

A new method for the determination of sulfur dioxide, SO₂, and sulfur trioxide, SO₃, in stack emissions was developed due to questionable results obtained from the EPA Method 8. This new method is a wet chemical procedure utilizing a pH 4.0 formic acid- sodium formate buffered formaldehyde solution to collect both SO₂ and SO₃ in the same solution. The absorbed SO₂ forms a stable adduct, hydroxymethanesulfonate, HOCH2SO₃^-, in solution with formaldehyde. The SO₃ is absorbed as sulfuric acid, H₂SO₄. The SO₃ is determined as …

Impatience To Response Time, Robert James Rovi

Theses

The concept of waiting patiently and impatiently is examined and a model is proposed which is helpful in explaining Increases in the levels of impatience. A survey of people working in the computer field was taken so that a measure of the time within which the average person becomes impatient for a variety of computer operations could be determined. These answers were then compared with the results of a survey taken in 1968. Results show that there was no significant difference between these two groups even though the survey taken in 1968 was expected to show longer expected response times …

Instrumentation To Measure Ion Flux Through Biological Tissues, John Edward Obenauer

Theses

An instrument has been designed and constructed which measures the ion flux through biological tissues utilizing the short circuit current technique. The system operates in three major modes: 1) obtains the fluid resistance and potential offsets of a chamber without the tissue mounted; 2) Voltage clamp mode - clamps the potential of the tissue to a predetermined value; 3) Current clamp mode - clamps the current through the tissue to a predetermined value. The system automatically compensates for fluid resistance and potential offsets in both voltage and current clamp modes. The instrument starts clamping a particular chamber immediately after mounting …

An Experimental Evaluation Of The Effect Of Evaporative Cooling Of Condenser Air On The Performance Of An Air Conditioning System, Arun Ananth Pai

Theses

The effect of evaporative cooling of condenser air on the performance, specifically cooling capacity and the coefficient of performance of an air conditioning system was determined. The dry bulb temperature of the entering air for an air cod-ed condenser was brought down to near saturated wet bulb temperature by spraying water into the incoming air and the effect on the cooling capacity of the evaporator was observed. Experimental curves were developed, which displayed the time/temperature difference history for both the condenser and the evaporator; consideration being given for both with aid without evaporative cooling of the condenser air.

Successive families …

On Analysis Of Small Bore Piping Vibrations, Nitinkumar Shroff

Theses

This thesis investigates the natural frequency and vibration induced stress of small bore power plant piping. Straight piping and piping with concentrated load, such as a valve, located anywhere along the span are studied. Four different boundary conditions of fixed-free, simple-fixed, fixed-fixed and simple-simple are investigated, as any single span piping may be approximated by one of these boundary conditions.

The results otained [sic] for frequency and stress coefficients in the case of straight piping are plotted. Plots of frequency factor and stress ratio for the piping with concentrated load are also presented.

The results obtained for the natural frequencies …

The Detection Of Partial Discharges In Transformer Oil, Gerald J. Fitzpatrick

Theses

The level, meaning the number and the intensity Of partial discharges that occur in transformer oil per time period of applied pulse when a high voltage is applied can be used as a measure of the quality and remaining life of the oil. The level of partial discharges at a given applied voltage can be correlated with the degree of contamination of the oil by impurities such as water and conductive particles and can be used as an indicator of the proximity of the oil to breakdown. There are several approaches to the detection of partial discharges, e.g., acoustic measurements, …

The Manhattan Project Legacy : Low Level Radioactive Waste Health Effects, An Epidemiological Study, Lisa Fetterman Voyce

Theses

An epidemiological survey was performed that included the area surrounding a former Department of Energy thorium processing and disposal facility. This facility processed monazite sands to obtain thorium under Federal Government contracts from 1941-1973.

New Jersey Department of Environmental Protection radiological surveys had shown elevated radiation levels at the Site and in the vicinity of the plant. The area was divided into sections according to distance from the site and from Sheffield Brook, which is also contaminated. Questionnaires were mailed to 400 families, with 112 responses. These represent 362 people.

Statistical analysis of the accumulated data regarding lifestyle, occupation, reproductive …

Behavior Of L-Shaped Reinforced Concrete Columns Under Combined Biaxial Bending And Compression, Amar Shah

Theses

Combined biaxial and axial compression for L-shaped reinforced concrete short columns is a common design Problem. Current code, provisions and the available design aids do not offer an insight into the determination of strength and ductility of biaxially loaded reinforced concrete column. An experimental and analytical investigation of the moment-deformation behavior of biaxially loaded L-shaped short columns were undertaken. Four 1/2 scaled specimens were tested till failure. Moment-curvature and load-deflection curves were developed from the experimental and the analytical results. The analytical results were obtained using a computer program developed by Hsu (1). From the investigation it is deduced that …

Behavior Of Tee-Shaped Reinforced Concrete Columns Subjected To Biaxial Bending And Axial Compression, Antoun Romanos Nader

Theses

The investigation deals with the effect of eccentric loading on the moment-curvature relationship of reinforced concrete tee columns.

The test program consisted of two series of tee-shaped reinforced concrete columns, loaded biaxially at constant angle from the principle axes. Their end conditions were assumed to be pinned-ended.

Loads, at constant rate, were gradually applied until failure. At each loading stage, measurements were made for the strains and deflections at the mid span section.

The experimental and theoretical results of the load- deformation and moment-curvature were compared and found that the analytical approach proposed by Hsu is applicable to irregular sections …

A Study Of Worker Motivation, Farid Uddin Ahmad

Theses

This thesis mainly deals with the motivation of the production managers, engineers, technicians and production workers. The purpose is to emphasize the need for providing due motivations to an important work group of the industry who are largely ignored. An attempt has been made to amply demonstrate the various techniques for worker motivation. As the study of standard motivational theories alone cannot solve the complex motivational problems, all possible efforts have been made to relate, integrate and blend the theories with actual applications in the organizations. All the relevant and important issues connected with worker motivation have been highlighted. Points …

The Effects Of Heavy Metals On The Chick Embryo Development, Yasmin Alibhai

Theses

The following is a research report on the effects of heavy metals on the avian embryo. A total of eight metals were used in the study. The metalE included were : cobalt, copper, indium, iron, manganese, molybdenum, arsenic and cadmium. A total of 800 eggs were used for the study. Salts of each of the metal were dissolved in physiological saline and injected into the air sacs of white Leghorn chick eggs. Dose levels varied with the metal to be tested. Control eggs were injected with an equivalent volume of saline (0.1 ml per egg). The eggs were injected on …

Energy And Economic Analysis Of Alternate Total Energy Systems, Swaminathan Balakrishnan

Theses

The purpose of this study is to evaluate the Performance of Diesel engines, gas engines, and gas turbines when used in a Total Energy System. To begin with, the history of cogeneration was studied, current literature and texts reviewed and companies which deal with these engines or turbines were contacted. Electricity and gas tariffs were obtained from the P.S.E.&G. Co. It was decided to consider an apartment complex of approximately 200,000 ft² having peak heating and cooling loads of approximately 4.92 million Btu/hr and 2.93 million Btu/hr respectively for this analysis. The average electrical demand was 520 KW. Next …

Volatile Organic Pollutant Levels In Indoor Environments From The Use Of Kerosene Heaters, Kashinath Banerjee

Theses

The indoor air pollutant levels caused by use of kerosene stoves as sources of heat in residences is of increasing concern as the use of such heaters becomes more widespread. Emission of volatile organic. species (aliphatic hydrocarbons from hexane to dodecane, cyclohexane and aromatic species including benzene, toluene, ethyl benzene, m/p xylenes, o-xylene and styrene) from these devices were measured at different sites. The organic vapor samples have been collected by adsorption on Tenax GC, and quantitatively analyzed by thermal desorption into a high Resolution capillary column gas chromatograph. Mass spectral analysis was also conducted for qualitative identification of sample …

Successful Management Techniques For Introduction Of Computerized Systems In A Production Facility, Michael James Boyle

Theses

This thesis surveys the potential for introducing significant organizational change into a manufacturing environment which is undergoing large scale capital improvement.

The first portion describes both the organizational and technological barriers present at a specific manufacturing facility. The capabilities of a computer based process control system are detailed along with its ability to fulfill the employer's particular business needs.

The next portion details the work necessary to train both management and production operators, not only on how to use this computer based equipment, but also how they themselves must change their personal modes of thinking in order to carry out …

Risk Assessment For New Products In Office Automation, Dolores Ann Canale

Theses

As investors survey the industrial growth of technology for the late 1980's one area leading the range for large potential growth is the area of office automation. Though this area has been under heavy speculation by many large firms (such as IBM, AT&T and EXXON) for the pass ten years it still remains an unexplored market for many investors. The objective of this research paper is to study the risks companies. will face developing products for this horizon.

Investors believe that success in this area, as well as, many other areas of engineering rely in large measure on the willingness …

Deposition Of Suspension In Inclined Channels Due To The Effects Of Inertia, Gravity And Image Force, I-Hsi Chu

Theses

This investigation was made to determine the effect on the deposition of particle in an inclined parallel-plate channel due to the influences of image charge, viscosity, inertia and gravity. The flow considered was lamina, imcompressible and steady. The flow patterns considered were uniform and fully developed with symmetry about the axis of the channel.

The governing equations derived for a particle were based on Newton's Second Law of motion. Since the resulting governing equations are linear second order differential equations, Runge-Kutta algorithm is used to solve the problem and graphical techniques is used to interpret the results of the numerical …

Microcomputer Controlled Instrumentation System For Studies Of Metabolic Changes In Rats, Murat Dertlioglu

Theses

The system measures the respiratory exchange in rats in a controlled experiment. An interface unit provides data, received from several measurement instruments such as gas analyzers, an electronic flowmeters, electronic thermometer and an electronic hygrometer, to the computer. The data is gathered from different chambers in a multiplexed mode.

The computer samples the chambers sequentially and prints out the results and stores them on the disk. The sampling duration of each chamber and the number of the rats to be tested can be programmed. The system can perform experiments with twelve animals, in the following arrangments, either one group of …

The Involvement Of Labor Unions In Policies Of Worker Safety And Health, Kenneth J. Dzierzawiec

Theses

American workers are exposed to many seen and unseen hazards in their working environment. As the potential hazards in the workplace became more complicated, so too did the analysis of these hazards, as well as the means of endeavoring to protect a workers safety and health.

In the period between the 1920's and the 1960's the major thrust of Union demands were in the areas of economic gain. Although there was concern for worker welfare.

The period of the late 1960's through the early 1970's brought with it a new outlook on industrial practices as compared with worker welfare and …

Computer Simulation For Studying The Performance Of Plasticating Extruders, K. S. Govindaraju

Theses

A Computer program for simulation of a single screw plasticating extruder is presented. The computer program simulates the performance of different size extruders with various screw geometries for plasticating and pumping different thermoplastic resins. The simulation yields valuable information on the performance of an extruder for a variety of operating conditions. The simulation program provides a means of separating the effect of one variable at a time on the overall performance of the extruders.

Tourist Development And Environmental Impact Of Future Airport Construction In Athens, Greece, Vasilios Michael Halkias

Theses

The present thesis is an overall study of the suitablility of the eastern region of the Attica Peninsula in Greece, for a Tourist Development. The future construction of the new International Airport of Athens within the region is a significant factor that has been taken into account for the study.

It also examines and projects the Environmental Impacts due to the Airport construction.

The description of the studied area is presented by maps and refers to the Environmental Inventory. This Inventory examines the Water Resources of the region, Topography, Land Uses, Transportation System, Air and Noise Quality, Archaeological Sites, Utilities, …

Performance Modeling And Simulation Of Multiple Microcomputer Systems, Moorthy Narayana Hariharan

Theses

Multiple processor systems are the logical choice for applications demanding high computing power, throughput and reliability. Moderately coupled Multiple Microprocessor systems can be applied to a variety of applications demanding high performance. The structure of Multiple Microprocessor systems is examined. Various interconnection structures are analysed for performance comparisons.

Queueing theory is a powerful tool in modeling and analysing Computer systems. Queueing models are developed for popular Multiple processor interconnection topolog es like the Shared memory, Shared bus, Star and Loop configurations.

The usefulness of Digital computer Simulation techniques in estimating the performance of Multiple processor systems is demonstrated through a …

Intelligent Computer Decision Systems, Robert J. Heath

Theses

This paper demonstrates that the concepts developed through Artificial Intelligence research are applicable to computerized information systems; and that a system of expert problem solvers and natural language interfaces exhibiting characteristics of "intelligent behavior" offer several advantages over present-day, conventional database management designs. Development of the conclusion was accomplished after an analysis and assimilation of the current literature in the field of Artificial Intelligence and participation in university symposia concerning its application to the business environment. It is concluded that incorporating the notions of learning and creativity, common sense(heuristics), and self-awareness, intelligent computer decision systems will provide managers with : …