Digital Commons Network^™

Automated Eeg Analysis And Spike Detection, Walter Vanderschraaf

Theses

EEG analysis of epileptic patients is extremely time consuming. Patients are monitored up to 36 hours at a time. The neurologist must visually review stacks of EEG records to determine whether they contain epileptic or artifactual activity. This process is very subjective and can vary from one neurologist to another based on his or her training and experience. The neurologist is only human and may tire or lose his or her concentration. Automated EEG analysis can efficiently reduce the amount of data and time involved in analysis. It is also more consistent and objective than human analysis.

The main objective …

Representation Of Graphical Deep Knowledge In An Object-Oriented Database System, Prasanna S. Venkatesh

Theses

Object-oriented approaches to the design of complex graphical interfaces have received an enormous impetus in the database and knowledge representation disciplines. As traditional CAD systems store information about all the objects for display purposes but do not store any knowledge for reasoning purposes, they are considered as "knowledge poor" and they cannot support efficient environments for design. In Artificial Intelligence the notion of "Graphical Deep Knowledge" has been proved successful to represent knowledge about objects for display purposes as well as reasoning purposes. To design "knowledge rich" systems which can support better graphical interfaces, the theory of "Graphical Deep Knowledge" …

Position Recovery And Motion Analysis From Stereo Image Sequences, Yuxin Xie

Theses

Based on four stereo images, a new concept of unified optical flow field has been developed recently [3]. It is a generalization of the optical flow in stereo imagery. A set of fundamental equations is established to characterize the unified optical flow field. Another set of equations is then derived from which 3-D structure can be reconstructed and its motion can be analyzed by the use of the unified optical flow field quantities. In this thesis, we use some synthetic images of a rotated conical structure to study and test the theoretical results. The simulation and results are presented, thus …

Simulation And Modeling Of Kinetics Of Silicon Oxidation In The Thin Oxide Regime, Tirthankar Dutta

Theses

Thermal oxidation of Silicon in dry O₂, in the thin regime(< 500A) is of vital importance to VLSI device engineers, because thin layers of SiO₂ are exclusively used as gate dielectric for high performance of MOS devices. There exist a number of models to explain the kinetics of oxidation in this thin regime. However there is considerable variance among them and the reported rate constants, which are supposed to describe the oxidation process. Rather than arriving at an alternative model, the present study aims at an extensive study and simulation of existing models of oxidation in dry oxygen, in the thin regime, with a recent set of experimental data and …

The Effects Of Oxygen Tension On Nitrate Reduction By Pseudomonas Isolate, Hao-Jan Hsing

Theses

It is a generally accepted concept that nitrate reduction only occurs under anaerobic conditions. Oxygen inhibits denitrification. However many studies of nitrate reduction under low oxygen tension have shown what has been called aerobic denitrification. This project examines the process of aerobic denitrification.

Oxgyen affects cell growth and the amount of nitrate utilized. When oxygen is absent, the cell growth rate is lower and nitrate utlization is higher then when oxygen is present.

Nitrate is reduced to nirite under anaerobic conditions. Nitrite accumulation did not continue increase. But increased then decreased producing a "Z" shaped graph when plotted.

Measurement Of The Removal Of Selected Vocs From A Municipal Treatment Plant, Hong Yu

Theses

Industrial wastewater contains a variety of volatile chemical constituents. The large majority of the volatiles are organics. Many of these volatile or¬ganic compounds (VOCs) end up in the effluent to wastewater treatment plants. It is necessary to estimate the emission of the VOCs from sewerage plants in order to study the fate of these volatile organic compounds.

This study focuses on the estimation and comparison of the emission of 28 volatile organic compounds from the water and air in four operation units of Linden Roselle Sewerage Authority (LRSA) wastewater treatment plant. The removal rates of these target compounds have been …

Software Development For Analysis Of Stochastic Petri Nets Using Transfer Functions, Aman U. Jamwal

Theses

This thesis research is an implementation of a closed-form analytical technique for study, evaluation and analysis of Stochastic Petri Nets (SPN). The technique is based on a theorem that an isomorphism exists between an SPN and a Markov Chain. The procedure comprises five main steps: reachability graph generation of the underlying Petri net, transformation of the reachability graph to a state machine Petri net, calculation of transfer functions, computation of equivalent transfer functions via Mason's rule, and computation of performance parameters of the SPN model from the equivalent transfer functions and their derivatives. The software is developed in UNIX using …

Experiments In Aerobic And Anaerobic Biodegradation Of Trichloroethylene, Qiong Liao

Theses

The removal of trichloroethylene (TCE) from industrial waste has been intensively studied in recent years, Biodegradation has been determined to be an effective treatment for TCE in the environment. Many researchers have studied the biodegradation of TOE and obtained successful results based on the use of specific isolated bacteria. At the NJIT Biotechnology Laboratory, a new method is being developed in which immobilized activated sludge is used to degrade several toxic chemicals in various reactor configurations. The objective of this research is to determine if these methods can be extended to treat TCE.

Activated sludge from a wastewater treatment plant …

Design Of An Advanced Control Algorithm For A Nuclear Power Plant Feedwater Control System, Randall C. Ezzo

Theses

Electric power companies with nuclear power plants have been aggressively looking for ways to increase plant safety and availability by increasing the reliability and performance of the plant's control systems. The performance of the Oyster Creek Nuclear Station's feedwater control system can be significantly improved by replacing the proportional-integral compensator with a compensator based on modern control concepts. In response to a -10 inch reactor water level setpoint change, settling time is improved from 107 seconds with 3% overshoot to 34 seconds with no overshoot.

Three Dimensional Visualisation Of Tmj Anatomy Using Mri Techniques, Mythreyi T. Krishnaswamy

Theses

The best assessment of temporomandibular joint (TMJ) can only be done by the scanning the jaw and getting an image without invivo analysis which causes patient discomfort. There have been innumerable efforts to get the best view using CT techniques for three dimensional visualisation. But very few have done work using MRI techniques.

The TMJ is an integral part of the jaw and helps in mastication and biting. Since the joint is a hinge sliding articulation any dislocation causes immense pain and discomfort.

To get a better assessment of the TMJ, MRI techniques have been used for data acquisition. The …

Computer Aided Design Of A Broadband Microwave Power Divider, Jaideep Mukherjee

Theses

The purpose of this thesis to provide alternative design procedure for a power divider that has broadband characteristics. The Wilkinson power divider consisting of cascaded quarter wave sections is known to increase the bandwidth while maintaining high isolation and good match conditions at individual ports. Resistors placed between the quarter wave sections served to increase isolation. The values of required components were determined using odd and even mode analysis. In this work, the approximate theory developed previously is used as a preliminary design model, and it is extended further by considering optimization techniques and coupling between adjacent arms. This novel …

Study Of A Non-Contact Gaging System Of Inspection, Gordhanbhai Ketan Patel

Theses

The quality control function has traditionally been performed using manual inspection methods and statistical sampling procedures. Manual inspection is generally a time - consuming procedure which involves precise, yet monotonous work. It often requires that parts be removed from the vicinity of the production machines to a separate inspection area. This causes delays and often constitutes a bottleneck in the manufacturing schedule.

As a solution to the above problem a Non - Contact Gaging System developed by Optical Gaging Products, Inc., has been used here to study the feasibility of using an automated inspection system and a procedure of developing …

Extension And Applications Of Knitting Technique For Petri Net Synthesis, Yanzhong Zhang

Theses

Petri nets have been used for modeling and analyzing various systems [1,2,3,4,8]. One approach to Petri net synthesis is a knitting technique [4,5, 6,7]. It was developed for modeling concurrent systems. The Petri net model is incrementally expanded by adding paths of nodes according to rules. To extend the knitting technique to cover synchronized systems, a set of new rules based on synchronic distance concept is presented. The rules penult synchronizing M exclusive processes (M 2) to a synchronic distance of any positive integer N. They can be applied to both exclusive processes and independent processes. The resulting Petri net …

A Study In Systems Integration Architecture, Sashidhar M. Prasad

Theses

This Thesis studies the two architectures OSCA and ANSA which support the ODPSE principle in the first two parts. In the third part the framework for integrating these two architectures is described. The idea of integration architectures in relation to open architectures is studied using the enabling technologies.

Vision-Guided Servoing Robot Arm System, Shing Lee

Theses

This thesis investigate the problem of tracking 2-D circle parts with an eye-in-hand robot arm system. A vision module capable of measuring the motion of a circle is developed. Two algorithms based on the conic equation representation of circle and the symmetric property are developed. The first algorithm approximates the image of the circle as an ellipse. The second algorithm use the arc radius estimator to extract two image points of the circle located at the center of the largest arc. These image points are then used to solve for the inverse perspective transformation. An inverse kinematics solution based on …

Biomass Conversion Of Solid-Waste (Newsprint) Into A Clean Fuel (Ethanol) By Enzymic Hydrolysis And Fermentation, Nimesh V. Gandhi

Theses

A feasibility study has been performed with two bioprocesses for conversion of newsprint waste to an environmentally safe fuel (ethyl alcohol) and carbon dioxide.

The following areas were investigated to accomplish this task: one hour pretreatment of newsprint by attrition, saccharification of paper slurry to glucose by cellulase and cellobiase, effects of pH, temperature and concentration of enzymes on conversion of paper to sugar, fermentation of glucose to ethanol and carbon dioxide by immobilized yeast, and simultaneous saccharification and fermentation of paper to ethanol and carbon dioxide using enzymes and immobilized yeast.

Results indicate that the enzymic hydrolysis of newsprint …

Integrated Anaerobic-Aerobic System For The Biodegradation Of Highly Chlorinated Aromatic Compounds, Cheng-Ming Kung

Dissertations

A two-step process was developed for the complete mineralization of hazardous chlorinated aromatic compounds. The system consisted of an anaerobic reactor, in which reductive dehalogenation took place, coupled with an aerobic reactor in which the complete mineralization of the products of the anaerobic dehalogenation occurred.

A mixed anaerobic culture from a municipal sewage treatment plant was enriched and then immobilized on silica-based porous beads to treat 2,4,6-trichlorophenol (TCP), which is the model target compound in this work. In the anaerobic reactor, TCP was degraded to 2,4-dichlorophenol which was, in turn, reduced to 4-chlorophenol (4-CP). Stoichiometric amounts of 4-CP were recovered …

An Experimental Sequence Examining The Effect Of Task Type, Memory Condition, And Display Presentation Type On Performance Time And Error Rate, Using Columnar Table Versus Vertical Bar Graph Versus Line Graph, Suparna Das

Theses

A total of 126 subjects at various levels of school and a health related manufacturing firm participated in three experiments that compared Tables, Line graphs and Bar graphs forms of data presentation. The experiments were performed each consisting of a training task followed by answering some questions based on the presented material. The experimental series were presented to six groups. Group 1, 3, 5 viewed Line graphs, Tables or Bar graphs respectively while answering the questions while the other three groups answered questions based on memory of either Line graphs, Table or Bar graph presentation.

The independent variables were:

1. Memory …

Canmol : Expert System In Medicine, Kulin Hemani

Theses

The intriguing words for the nineteen nineties are "Expert Systems", and "Artificial Intelligence". To a layman these terms conjure up thoughts of spaceships and futuristic beings. In reality they exemplify man's capability to harness technology.

Expert systems are computer software programs that make use of previously accumulated knowledge to assist in solving complex problems.

In recent years the practice of medicine has changed dramatically from a fundamentally individually deductive approach to an Artificial Intelligence based science. The modern physician no longer draws conclusions simply by examining the patient. Today the physician employs sophisticated computer based diagnostic tools to generate a …

Calcium Channel Dynamics In Hippocampal Neurons : Simulation And Physiological Studies, Prasad D. Jasthi

Theses

Mathematical modelling and computer simulations of neurons was presented by various researchers in the past. Computer simulations provide a time efficient and cost effective method to obtain required information about the physiological system. The objective of this project is to study the kinetics of calcium channels in hippocampal neurons. In an attempt to study the calcium channel activity we have developed a mathematical model for the CA3 region of the hippocampus and have analysed the calcium current noise obtained from the physiological recordings. The Simulation results had reproduced the action potential and activities of sodium and potassium channels, but did …

Development Of Technology For Glass Shaping By The Use Of Abrasive Water-Jet, Li-Yuan Shih

Theses

This study is to investigate the effects of AWJ properties on the results of glass machining and to develop a practical procedure for prediction of these results of abrasive waterjet (AWJ) machining. The use of glass in engineering and Abrasive Waterjet Cutting Technology are introduced. A practical technique to prevent defects and to improve the quality of the glass surface is suggested. A earlier parameter introduced, Exergy Distribution Density (EDD), is used in order to characterize the cutting conditions.

It was found that besides of EDD the results of machining are affected by the particles' destruction in the course of …

A Common Application Model For Interfacing With Advanced Program To Program Communication/Vm, Joseph Viviano Jr.

Theses

The Merrill Lynch data processing environment is composed of a conglomeration of applications which reside on various platforms. LAN and minicomputer based applications coexist with those making their home in the mainframe arena. Unfortunately, coexistence does not imply cooperation, data uniformity, data centralization or coordinated application development. Within the Merrill Lynch mainframe arena alone there are two operating systems which reside across several computing complexes, MVS (Multiple Virtual Storage) and VM (Virtual Machine). Critical business applications and data are unique to each of these environments. The problem lies in the need for cooperative processing and sharing of distributed data among …

Broadband Isdn Control Using Neural Networks, Stavros Zervoudakis

Theses

Broadband Integrated Services Digital Networks (B-ISDN) are considered to become the standard communications networks in the near future. Major research efford is being applied in determining the appropriate mode of operation for B-ISDN systems. Two proposals, the Synchronous Transfer Mode (STM) and the Asynchronous Transfer Mode (ATM) claim to best fit the B-ISDN transmission requirements individually. A new method for B-ISDN traffic control is proposed in this paper. This method assigns priority levels to incoming traffic while integrating STM with ATM. A neural network is used to decide how the multiplexing of the incoming packets will be performed. Several traffic …

Biodegradation Of Phenol And 4-Chlorophenol Using A Single Species In A Sequencing Batch Reactor, Kung-Wei Wang

Theses

Biodegradation of phenol and 4-chlorophenol (4CP) using Pseudomonas putida (ATCC 17514) was studied in batch and sequencing batch reactors. Batch experiments were first performed in order to reveal the kinetics of biodegradation for each substrate. 4-Chlorophenol was degradable only in the presence of phenol, or immediately after exposure of the organism to phenol. It was postulated that an enzyme induced by the presence of phenol was necessary to initiate degradation of 4-chlorophenol.

A mathematical model was then developed to describe the dynamic behavior of both substrates in a sequencing batch reactor (SBR). The model utilized rate parameters obtained from batch …

Design Optimization Of Laminated Fiber Composites, Ramarao G. Prasad

Theses

Laminated Fiber Composites are finding a wide range of applications in structural design especially for light weight structures that have stringent stiffness and strength requirements Finding an efficient composite structural design that meets the requirements of a certain application can be achieved not only by sizing the cross-sectional areas and member thicknesses but also by global or local tailoring of the material properties through selective use of orientation, number and stacking sequence of the laminae that make up the composite laminate.

The work presented here treats the design optimization problem involving minimum weight design of fiber composite laminates subject to …

Disc Size Scale-Up In Rotating Biological Contactor System, Chi-Sheng Chang

Theses

Disc size scale-up of prototype and small-scale RBC plants are successfully developed by applying the 114 data sets obtained from 12 RBC plants to the evaluation of percent sBOD remaining. These data analyses are performed by the least square method, therefore, the scale-up factors of the prototype and the small-scale are determined at different hydraulic loading. Furthermore, the relationship between scale-up factor and the disc diameter are established under the given flow rate, the number of stages, and the number of discs. A group of Curves are obtained and can be utilized for the full-scale RBC plant preliminary design. The …

Deconvolution Applications In Arterial Dynamics, Shanthi Ganesan

Theses

This thesis deals with the computation of the Arterial Impulse Response Function by deconvolving aortic pressure and flow signals in time domain. Several methods have been developed in the past to obtain a solution for the convolution integral. These are (1) Transform method, and (2) Numerical Approximation methods : a. Conventional method b. Relaxation methods.

These methods have been applied in the past to the RC network model and it was found to work well. In this thesis, the methods are applied to data from more realistic models and also on data obtained from dogs. The model considered is a …

Radiation From The Cylindrical Dielectric Taper, Tor-Odd Hoydal

Theses

The radiation problem of the cylindrical dielectric taper, excited by the HE₁₁ dominant mode, is studied. A theoretical model and a numerical investigation into the radiation characteristics of such a tapered structure are presented. The model is based upon the combination of the exact modal field solutions for a step profile cylindrical dielectric waveguide, Local Mode Theory, and the Equivalence Principle for the determination of equivalent current densities.

The far-zone radiation field is considered to be the summation of the fields produced by two radiative components in the dielectric rod/conical structure: The "aperture" of the uniform dielectric rod at …

Bio-Mechanics Of The Hip Joint And The Engineering Considerations In The Treatment Of Unstable Intertrochanteric Fractures, Manoj D. Nene

Theses

Numerous previous attempts have been made to determine the magnitude and the direction of forces acting on the hip joint. The mechanism of femoral neck fractures and the frequently occurring failure of its internal fixation has led engineers to analyze the forces involved. An unstable intertrochanteric fracture is one which lacks continuity of the bone cortex on the opposing surfaces of the proximal and digital fragments. A mathematical model is created in this study to examine the 135° and 150° nail plate. The results give an approximate estimation of stresses on the two plates. A 3D finite element model of …

Cascading Space Efficient Variation Of The Lzw Algorithm And Arithmetic Coding, Shobha Raj

Theses

Two known compression algorithms appropriate for communication are LZW and the Arithmetic Coding method. Both are adaptive and require no extra communication from the encoder to the decoder. Here we have considered a space efficient variation of the LZW algorithm which achieves better compression.

We present a scheme to cascade the space efficient variation of the LZW algorithm with Arithmetic Coding into a space efficient data compression algorithm which achieves a higher compression ratio and is appropriate for communication.