Digital Commons Network^™

Series Compensation Investigation On The Hydro-Quebec And Nypa 765 Kv Transmission System : Modeling And Stability Analysis, Hans J. Candia

Theses

This thesis presents a mathematical approach for raising the power steady state stability limit by adding series capacitive compensation to a transmission line. The effect of series capacitive compensation and degree of compensation were investigated in detail. The power system studied includes an automatically controlled power system, IEEE Type I.

The results of the actual and theoretical steady state stability limits for a given series capacitance location and degree of compensation were obtained by applying the frequency domain technique. The natural frequencies of each compensated power network were examined.

The best location for series capacitive compensation is proposed which is …

Mathematic Models On Leaching Behavior Of Chemical Solidification And Stabilization Process For Heavy Metal Sludges, Sz-Hung Chen

Theses

Chemical Solidification and Stabilization of toxic metal-containing sludges is one of the most important problems for environmental protection. Although Chemical Solidification and Stabilization of hazardous wastes prior to disposal is increasing in importance, very little work has been done concerning the leaching mechanisms and kinetic models.

In this study, we apply Freundlich & Langmuir isotherms on Chemical Solidification and Stabilization process, and the theoretical results match with experimental data very well. In the same time, we develop a simple methematical kinetic model which relates leaching concentration of heavy metal to curing time. In this study kinetic model, what you need …

Real-Tv : Rtp/L3'S Visual Monitor, Richard Czop

Theses

Today many real-world activities are being monitored and controlled by some type of micro-processor based system. Emphasis is placed on manufacturing and controlling through the use of computers. The inherent nature of these real-world applications makes them difficult to control and monitor. They must be built meeting strict timing constraints and must be predictable. We need to develop simplistic, reliable, and cost effective methods for building, evaluating, monitoring and controlling these complex systems. These tools should provide the user with system insight. At the New Jersey Institute of Technology Real-Time Computing Laboratory, we are building a system that will provide …

A Finite Element Thermal And Diffusion Analysis At Bearing Metal Interface In Extrusion Processes, Biju Dennis

Theses

A mathematical model is developed to study the effect of extrusion speed and the bearing length on the surface temperature along the die billet interface. The surface temperature distribution resulting from the plastic work done on the die billet interface is studied. Finite element analysis is done on the model incorporating the mass transport effect occurring during the extrusion process and the interdependence of various parameters are presented. Die wearing problem is analyzed considering the effect of diffusion. Thermal analogy of the diffusion problem is utilized in the development of the mathematical model for diffusion problem and finite element analysis …

Computer Numerical Controlled (Cnc) Machining Of Screws And Dies For Plasticating Extruders : Determination Of The Criteria For Implementing Cnc Machining, Nilesh H. Desai

Theses

The work of this thesis is dedicated to the manufacturing industry making production equipment to manufacture plastic products. The main theme of the thesis is to determine the criteria for implementing Computer Numerical Control machining to make parts with complex geometries for production equipment.

A small manufacturing company with job shop type of production was chosen as the subject and study of extruder manufacturing process was performed. The various available alternatives of CNC manufacturing units available in the market were chosen and their feasibility examined.

At present a large variety of CNC machine tools are available in the market, offered …

Binary Image Decomposition And Compression Using Mathematical Morphology For Object Recognition, Venu Gopal Gogusetti

Theses

Image segmentation has been studied for several years. There are several segmentation techniques which are fast and effective but all of them are lacking the property of invariency to shift, rotation and sizing. In this study a new process is introduced which overcomes the shift, size and rotation variance and the compressed data can be used for object recognition.

Euclidean distance measurement is used in the compression process which is rotation invarient but is expensive in terms of time. Eucledean distance transformation is calculated using optimal double two scan algorithm with gray scale morphology, a new method developed by Dr. …

Attempts To Demonstrate Reductive Dechlorination Of Chlorobenzenes By Anaerobic Microorganisms, Melissa S. Gross

Theses

Chlorobenzenes are a source of environmental pollution throughout the world. Investigations of the potential biodegradability of these compounds have been conducted employing different media under various conditions. In this study, the biodegradability of hexachlorobenzene (HCB), pentachlorobenzene (QCB), and 1,2,3,4-tetrachlorobenzene (1,2,3,4-TetCB) at a concentration of 70 uM (20 ppm), 80 uM (20 ppm), and 93 uM (20 ppm), respectively, was investigated. The source of inoculum was fresh anaerobic digester sewage sludge. Compound and sludge were combined in a serum bottle incubation system under anaerobic conditions and allowed to incubate at 30°C for several weeks. An extraction method utilizing hexane and acetone …

A Machine Entity For A Coordinate Measurement Machine : The Generic Workcell Project, Richard C. Meyer

Theses

The Center for Manufacturing Systems (CMS) department at New Jersey Institute of Technology and Siemens Corporate Research located in Princeton have agreed to jointly implement a research project in generic workcell control architectures. This paper discusses the module, called a Machine Entity, developed by the author that interfaces the Brown & Sharpe Coordinate Measurement Machine located on the CMS factory floor with the cell control software. The module has been designed in such a manner to simplify the development of future Machine Entities, thereby reducing the time required to integrate the CMS factory floor.

Dynamic Machine Scheduling, Expansion, And Control Of A Generic Workcell, Peter A. Murray

Theses

Factory automation has come a long way since the invention of the automatic flour mill. A workcell is a group of machines (robots) working together to produce a product. In the past workcells have been hard wired using methods such as Programmable Logic Controllers (PLCs). To change a part of this system would require reprogramming the entire system.

The Generic Work Cell (GWC) is a dynamic architecture which allows a workcell to be modified on the fly. The architecture enables the generation of new cells with minimal effort, and the modification of the system without reprogramming the entire system. The …

Recalcitrance Of Polychlorinated Biphenyls To Biodegradation By Phanerochaete Chrysosporium In Soil, Thierry B. Poncet

Theses

The white rot fungus Phanerochaete chrysosporium has been shown in the past to effectively degrade a number of chlorinated aromatic compounds. Previous investigators (Eaton, D. C., "Mineralization of Polychlorinated Biphenyls by Phanerochaete chrysosporium, a Lignolytic Fungus", Enz. Microb. Technol., 7, 194-196 (1985); Bumpus, J. A., Tien, M., Wright, D., and Aust, S. D., "Oxidation of Persistent Environmental Pollutants by White Rot Fungus", Science, 228, 1434-1436 (1985)) have also claimed that this fungus is capable of mineralizing polychlorinated biphenyls (PCBs) in submerged cultures under stationary conditions. Therefore, the objective of this work was to study the biodegradation activity of the fungus …

Searching For Orthogonal States Of Neural Networks, Heng Wang

Theses

Two approaches to find orthogonal states of neural network are presented in the paper. The first approach is a recursive one, it builds N orthogonal vectors based on N /2 orthogonal vectors. The second approach is a formula approach, in which orthogonal vectors can be obtained using a formula. Using these approaches, orthogonal states of neural network are found. Some properties of the neural network built on these orthogonal vectors are presented in Appendix A and some examples are given in Appendix B.

Selective No Absorption From Gas Streams With Tertiary Organic Hydroperoxide Solutions, Huihong Ao

Theses

The selective removal of nitric oxide from gas streams was investigated using 3,6-dimethyl-3-octyl hydroperoxide, p-menthane hydroperoxide, pinane hydroperoxide, and cumene hydroperoxide in solutions of n-hexadecane (cetane). The influence of different parameters such as temperature, gas stream flow rate (or residence time), and concentration of hydroperoxide compounds on efficiency of NO removal was evaluated. The basis of this research was to duplicate atmospheric reactions between hydroperoxides and NO in order to produce NO₂. We succeeded in removing NO from gas streams, but failed to produce NO₂. NO reacted with the hydroperoxides to produce nitrates. These nitrates are …

I. Removal Of Chromium From A Highly Contaminated Soil/Slag Matrix By Soil Washing At Low Ph, Ii. Removal Of Chromium From Impregnated Clay Matrices By Soil Washing At Low Ph, Erez Gotlieb

Theses

Section I. Chromium is a major soil contaminant of industrial sites in New Jersey, as well as in many of the Superfund sites throughout the United States. Removal of chromium by soil/slag washing with low pH sulfuric acid solutions is described. The extraction parameters are acid concentration, contact time, temperature, solvent/soil ratio, and acid type. The effect of two-stage extraction is discussed.

Soil/slag washing with sulfuric acid concentrations of 2% weight:volume (units are g/ml. This concentration is approximately equal to 0.4 N) at 75:1 v:w solvent/soil ratios yielded chromium extraction efficiencies of 95%, but 50% of the soil matrix was …

Immobilization Of Heavy Metals In Incinerator Ash Using A Microbiological System, Gordon Hinshalwood

Theses

The heavy metals contained in incinerator ash constitute an environmental hazard because they can be leached out of the ash matrix by rain water after the ash is landfilled. This study focused on a novel biological treatment process in which immobilization of the heavy metal content of incinerator ash is achieved using naturally occurring microorganisms. Specifically, immobilization was obtained by the use of a sulfide producing bacteriological system. The genus Desulfovibrio was cultured under anaerobic conditions, providing a source of sulfide from the reduction of sulfate as a natural metabolic function. The sulfide produced then formed highly insoluble precipitates with …

Characterization Of Low Pressure Chemical Vapor Deposited Silicon Dioxide Thin Films, Xue Du

Theses

LPCVD deposited amorphous silicon dioxide SiO₂ thin films from a new chemical vapor source, diethylsilane (DES), were characterized. This work is focused on evaluation of SiO₂ films prepared by varies deposition temperatures and flow rates series.

SiO₂ thin films were evaluated for density, porosity, and refractive index. Techniques for evaluation of the above mentioned parameters for this work included the use of infrared absorption spectroscopy, preferential etch procedures, optical measurement of refractive index and thickness, and thermal annealing of CVD films. The densification in vacuum ambient has been carried out at the temperature of 600 °, 750 …

Kinetics Of Phenol Biodegradation By Pseudomonas Resinovorans (Atcc 14235), Susmita Guptapal

Theses

The kinetics of phenol biodegradation were studied by using a pure culture of Pseudomonas resinovorans (ATCC 14235). Experiments were performed in shaker flasks and samples were analyzed for biomass content (based on optical density), and for phenol concentrations (based on HPLC measurements). The experimental data indicated that phenol is an inhibitory substrate at high concentrations. Specific growth rate data were fitted to an Andrews' expression with good success. The regressed kinetic constants were also used in predicting phenol biodegradation as a function of time. It was found that predicted and actual experimental values were close at least for the first …

Computer Aided Shape Optimization Using Finite Element Analysis, Charanpreet Singh Bagga

Theses

Various theories behind Computer Aided Shape Optimization are studied. A special attention is paid to the shape representation, mesh generation and refinement during the shape optimization process. Shape optimization process for a wall bracket is performed using the Computer Aided Engineering package of I-DEAS. Finite element analysis of the wall bracket is done and the stress distribution over the bracket is studied. The bracket is trimmed in the selected low stress regions using shape optimization capability of I-DEAS and an optimized shape of the wall bracket is obtained. The end product is evaluated using Supertab module of I-DEAS as well …

Conditional Artificial Dielectric : Optically Controlled Microwave Modulator, J. Manuel Jimenez

Theses

A conditional artificial dielectric with embeddings of either CdS, GaAs or Si in PMMA form the dielectric material of a microstrip in a homodyne microwave detection system. The system consists of a Michelson or Mach-Zehnder interferometers with the microstrip placed in one arm. The index of refraction of the microstrip substrate is modulated by chopped incident light causing amplitude and phase variations in the incoming RF signal. Those variations are detected by mixing the light modulated microwave carrier(information channel) with the unmodulated carrier (reference channel) in the interferometer. The output is sensed by the square law detector and a lock-in …

A Heuristical Method Of Corner Points Detection On An Image Boundary, Qiulin Li

Theses

A heuristics-based method of corner points detection on an image boundary is proposed and implemented. The method uses the sampled boundary distances to find all of the candidate corner points along the image boundary. Then the curvature characteristical value is used to measure the severity of curvature change of the candidate points. Those candidates whose curvature characteristical value is under some threshold are eliminated. The paper also proposed some mechanism to reduce the effect of noises on the boundary. Experiments show that it is an efficient method and it gives satisfactory results on some image boundaries.

A Knowledge-Based Design System For A Housing Project For Altzheimer's [Sic] Disease Patients And Their Caregivers, Karin S. Bannier

Theses

Since the beginning of the 20th century, architecture went through several different developments. Throughout these developments a large number of movements and design models Emerged, based on different design knowledge. The motivation for design projects is related Mainly to historical, functional, or site related issues. Today's changes in social relationships and therefore living arrangements question the validity of existing traditional design solutions, especially in the case of disabled clients. A new or modified specific design knowledge base has to be considered in order to meet the specific client's needs. To satisfy the wide range of changing nontraditional criteria that face …

Biodegradation Of Phenol And Benzoic Acid In Batch And Sequencing Batch Reactors, Stephane Reynaud

Theses

A pure culture of Pseudomonas aeruginosa ( ATCC 10145 ) was used for the biodegradation of phenol and benzoic acid. Two sets of small scale (shaker flask) experiments were originally performed: in the first set, phenol was the only carbon source present while in the second, benzoic acid was the sole carbon source. These experiments revealed the kinetics of benzoic acid degradation (they were found to be described by a Monod, non-inhibitory model), as well as of phenol biodegradation (they were found to be described by Andrews'inhibitory model) by Pseudomonas aeruginosa.

The kinetic expressions from the small scale experiments …

Behavior Of Square And L-Shaped Slender Reinforced Concrete Columns Under Combined Biaxial Bending And Axial Compression, Wen Hu Tsao

Dissertations

A numerical analysis was developed to evaluate the complete load-deflection and moment-curvature relationships for square and L-shaped slender reinforced concrete columns subjected to biaxial bending and axial load. This computer model can be used for any cross section geometry and material properties of normal concrete. The analysis was based on a deformation control and both the ascending and descending branches of curves can be studied. The finite difference method was introduced to calculate the deflections which satisfy the compatibility equations. Six square slender columns and eight L-shaped slender columns were tested to compare their experimental load-deformation results with the analytical …

A Generalized, Parametric Pr-Qmf/Wavelet Transform Design Approach For Multiresolution Signal Decomposition, Hakan Caglar

Dissertations

This dissertation aims to emphasize the interrelations and the linkages of the theories of discrete-time filter banks and wavelet transforms. It is shown that the Binomial-QMF banks are identical to the interscale coefficients or filters of the compactly supported orthonormal wavelet transform bases proposed by Daubechies.

A generalized, parametric, smooth 2-band PR-QMF design approach based on Bernstein polynomial approximation is developed. It is found that the most regular compact support orthonormal wavelet filters, coiflet filters are only the special cases of the proposed filter bank design technique.

A new objective performance measure called Non-aliasing Energy Ratio(NER) is developed. Its merits …

Analytical Methodology For Atm Control Panel Design, Donald C. Johnson

Theses

This thesis presents a methodology for control panel design and layout along with a case study of an automated teller machine (ATM). A predictive model of human endurance and fatigue is developed from anthropometric, biomechanical and kinematics research. The layout problem is formulated to assign controls to locations to minimize the fatigue imposed on an operator performing a known set of tasks. A family of optimal and near-optimal layouts are found using conventional algorithms. The final hardware design refinements are suggested by human factors concerns. Ergonomic guidelines are also proposed for software aspects of the design. The methods and guidelines …

Computer Control For 2-Axis Magnetic Suspension System, Jian Chen

Theses

A two-axis magnetic suspension system. using linear-potentiometer position sensing and DC solenoids, controlled digitally by a 80386 microcomputer has been built and operated in our laboratory. Control algorithms obtained by combining the full-state feedback control law with two methods of estimating velocities are studied. One method uses a nonlinear reduced-order observer; the other uses a finite difference algorithm. The nonlinear reduced-order observer performs better in simulation but the difference algorithm takes less calculation time and is used in the implementation. The system has been operated successfully to suspend weights up to 1.2 lb. and to get a slant angle more …

Minimum-Time Control For Submarine Interception, Zaiping Chen

Theses

This thesis attempts to offer a possible improvement for conventional anti-submarine system which is mounted on warship. It consists of two parts: the control law and its realization concerning the particular problem. The control based on optimal theory is devised for three-dimentional minimum-time interception. A microprocessor system is also designed to achieve all necessary steps to track and attack the target. The thesis focuses on the question of how to launch a group of subcharges to destroy a submarine cruising under water: find the optimal trajectory by developing a numerical method to solve the nonlinear dynamic system and design a …

Editing Digital Audio Using A Perceptual Model, J. Mark Goode

Theses

In this paper we describe an intelligent system used to aid an audio recording producer in the selection of edit points in a musical sequence. It is possible to make meaningful recommendations concerning auditory input data without the ability to fully classify that data or interpret all outside goals. Perceptual modeling of the auditory input can allow sufficient reasoning ability for an intelligent system to be of use editing digital audio. To create a perceptual model, the information which can be extracted by the ear is embodied in several expert sections which communicate with a rule based decision maker via …

A Case Study On Petri Net Modeling, Animation, And Simulation, Suresh C. Gurala

Theses

Petri nets as a graphical tool has developed over the last decade into a suitable model for representing, modeling, designing, analyzing and studying concurrent systems. In this thesis, Petri nets are applied for analyzing, modeling and simulation of a flexible assembly station. An existing AT&T FWS200 flexible assembly workstation for printed circuit board is modeled using Petri nets without the consideration of insertion failures and other abnormalities in the system. The Petri net model is then simulated using Graphics simulation language (GSL).

Advanced Manufacturing Applications Of Cost Estimating Techniques For Metal Cutting Industries, Zubair Hamid

Theses

In this work, different cost estimating techniques in metal cutting industry were studied. A basic understanding of estimation concepts were given. The typical breakdown of total cost was also given and discussed in details. Practical applications of cost estimating is studied. The effect of different parameters which relate to the lot sizes or quantity were discussed. All these results show that total cost is minimum at a point which is called least cost point, after that cost increases because of the addition of extra resources, in terms of man, machine and increase in administrative expenses.

Bridge Deterioration Models, Christopher R.H. Howard

Theses

The deteriorated condition of America's bridges raises the need for a proper and optimal method of bridge management, from the conceptual stage through the construction stage, and throughout the useful life of our bridges. State agencies need to expand their data collection process so as to include additional information pertinent to the formulation of a credible system. This is critical in order to accommodate increased research efforts to investigate the behavioral pattern/s of the nations bridges and to eventually optimize bridge management systems. This thesis looks at the bridge deterioration model as a vital tool in realizing more effective bridge …