Digital Commons Network^™

Knowledge Based Designing Of Broadband Coaxial Cable Networks, Tauqir Hameed

Theses

The objective of this research was to build a broadband coaxial cable network. One of the basic requirement of a network is the physical link transmission medium. For the purposes of this research, broadband coaxial cable was chosen as a physical medium of data communication. The approach taken in this research was to divide network design into three main steps. In the first step, the decision on topology of the network was determined. Both Star and Minimum Spanning Tree topologies were used and then the Esau-Williams Algorithm was employed to minimize the cable length. In the second step, various signal …

A Three-Dimensional Finite Element Stress Analysis Of Interface Conditions In Porous Coated Hip Prosthesis, Siu-For Yau

Theses

A three-dimensional finite element model of a collar-type hip stem and both the cortical and cancellous bones is used to investigate the stress distributions on an implanted femoral stem, adjacent bone, and specifically at the bone/implant interface for various amounts of porous coating and different stem materials. The finite element model consists of 909 nodes comprising 536 linear eight-node solid brick elements and 176 two-node interface elements. The finite element analysis code employed is SUPERTAB from SDRC. The interface elements consist of coincident-node spring elements and gap elements which model the rigidly bonded and loose interfaces respectively. Local coordinate systems …

Mobile Manipulator Path Planning By A Genetic Algorithm, Min Zhao

Theses

The thesis addresses the path planning problem for a mobile manipulator system which is used to perform a sequence of tasks specified by locations and minimum oriented force capabilities. The problem is to find an optimal sequence of base positions and manipulator configurations for performing a sequence of tasks given a series of task specifications. The formulation of the problem is nonlinear. The feasible regions for the problem are nonconvex and unconnected. Genetic algorithms applied to such problems appear to be very promising while traditional optimization methods cause difficulties. Computer simulation is carried out on a three degrees-of-freedom manipulator mounted …

Low Pressure Chemical Vapor Deposition (Lpcvd) Of Silicon Carbide From Diethylsilane, Yi-Tong Shi

Theses

The depositions of amorphous and cubic-crystal SiC from a new chemical vapor deposition source, diethylsilane(DES), have been studied. Amorphous SiC thin films and crystalline cubic-SiC materials have been deposited on silicon wafers at temperature lower and higher than 850C, respectively. The activation energy and a reaction mechanism involving the production and subsequent desorption of diethylsilene has been suggested, which explains the observed deposition dependency with the temperature and reactor pressure. A model based on the polymerization of DES is offered and the deposition rate is found to be the result of a large number of simultaneously occuring deposition processes for …

Biodegradation Of Diflufenican Using Anaerobic Microbial Consortia, Velukumar T. Nanjagowder

Theses

In this thesis I examine the feasibility of using anaerobic microbial consortia from digested anaerobic sludge to degrade Diflufenican, a fluorinated herbicide released into the environment as a result of agricultural usage. The compound is manufactured by Rhone Poulenc and it is an active ingredient of agricultural herbicides. The anaerobic digested sludge served both as a source of microorganisms and as a growth medium. Initial studies were conducted by making a stock solution of 1 ppm concentration of Diflufenican in acetone, the optimal solubility of the compound as suggested in the material safety data sheet is 0.05 ppm in water. …

Work-Preserving Real-Time Emulation Of Meshes On Butterfly Networks, Alf-Christian Achilles

Theses

The emulation of a guest network G on a host network H is work-preserving and real-time if the inefficiency, that is the ratio W_G/W_H of the amounts of work done in both networks, and the slowdown of the emulation are O(1).

In this thesis we show that an infinite number of meshes can be emulated on a butterfly in a work-preserving real-time manner, despite the fact that any emulation of an s x s-node mesh in a butterfly with load 1 has a dilation of Ω(logs).

The recursive embedding of a mesh in a butterfly presented by …

Oscillatory Potentials Model And Parameter Identification, Huizhong Pan

Theses

Two mathematicals model are presented for the oscillatory potentials of the electroretinogram. These models represent the oscillatory potential in terms of sets of parameters whose values may provide information of diagnostic value.

The test setup and protocol for obtaining the oscillatory potentials are described, as well as the data processing including acquisition up to identification of the model parameters.

Data from eight subjects, five normals and three diabetics, were used to evaluate the two models. These preliminary test results show a marked difference in the values of some of the model parameters between normals and diabetics.

A Microengineered Beam Diaphragm Structure For The High Performance Pressure Sensor, Alkesh Shah

Theses

The thesis details the design for a novel microengineered beam diaphragm structure for piezoresistive pressure sensor applications. The beam diaphragm structure is used as a pressure sensing device, within a Wheatstone bridge circuit. The single crystal silicon with [100] orientation is used for the beam diaphragm structure.

It has the advantages of high sensitivity(2.56 v/v/mm of Hg), good linearity(3Kpa to 1.4 Mpa) and overpressure protection with the help of the bosses. It's protection range is about 400 times the standard pressure range. The beam diaphragm structure has two rectangular bosses which are formed by anisotropic etching. Two pairs of diffused …

Low-Temperature Crosslinking Of Polycyclopentadiene, Lawrence Peters

Theses

Cyclopentadiene was polymerized via a Diels-Alder mechanism at 174°C under an inert atmosphere. The polymer obtained after ll hrs of reaction had a low bulk viscosity of 8 cps and a viscosity-average molecular weight, Mv, of up to 3000. An unsaturated polyester was synthesized from maleic anhydride and ethylene glycol in the presence of chlorosulfonic acid at room temperature. The polyester had an intrinsic viscosity of 0.024 cps. At 60°C, polycyclopentadiene (PCPD), and the unsaturated polyester were reacted to yield a viscous liquid which was crosslinked at room temperature over 48 hours in the presence of styrene, triethyleneglycol dimethacrylate (TEGDMA), …

Undergraduate Catalog, 1991-1993, New Jersey Institute Of Technology, New Jersey Institute Of Technology

Course Catalogs

No abstract provided.

A Comparative Analysis Of The Efficacy Of Zero-Order, First-Order And Monod Kinetic Models In Representing Raw Aerobic Biodegradation Data, Andrew I. Bakun

Theses

A total of 148 raw aerobic biodegradation data sets from batch and continuous stirred-tank reactors were extracted from the open literature and previous NJIT MS theses. Kinetic analysis of each of these data sets was performed with respect to the following commonly used empirical models: (1) zero-order, (2) first-order, and (3) Monod. Two constant-biomass versions of each model were evaluated; one in which So (i.e., the boundary condition for substrate concentration at time equal to zero) was assumed to be equal to the measured value of the initial substrate concentration and the other in which So was treated as a …

Mathematical Modeling Of Mass Transfer In Microvascular Wall And Interstitial Space, Daekyung Kim

Dissertations

The dynamics of macromolecular transport across the microvascular wall and into the adjoining interstitial space was studied in the hamster cheek pouch using intravital fluorescence microscopy in combination with digital image processing. Fluorescein isothiocyanate-labe led dextrans (FITC-Dx) of 70,000 and 150,000 daltons were used as tracers. In each experiment, the time-dependent extravasation of FITC-Dx from a leakage site in a blood vessel was videotaped for about 2 hours. The macromolecular transport from individual microvessels was quantified by digital video-image processing. Histograms of the light intensity distributions for selected fields at various times were obtained and then converted to the interstitial …

The Theory Of Bootstrapped Algorithms And Their Applications To Cross Polarization Interference Cancelation, Abdulkadir Dinc

Dissertations

Dual-polarized transmission has become an important method for frequency re-use, particularly in satellite and microwave radio communication. Nevertheless, cross-polarization interference, which is inherent to this method, may cause degradation in system performance.

Different canceler [sic] structures have been proposed to mitigate the effect of cross-polarization. Among these are the diagonalizer, the least mean square (LMS) canceler [sic] and the bootstrapped cancelers [sic]. Bootstrapped canceler [sic] schemes have been proposed and implemented in different applications, such as satellites, tactical communications, and quadrature amplitude madulation [sic] (QAM) dual polarized microwave radio. Nevertheless, no attempt was made in the past to quantify the …

Mathematical Modeling Of Chemical Vapor Deposition Processes And Its Application To Thin Film Technology, Norman W. Loney

Dissertations

A number of workers in the field of Chemical vapor deposition (CVD) have presented mathematical models in the literature. Some workers were able to produce analytical expressions for the interwafer concentration profile. These analytical expressions were based entirely on zero or first order chemical reaction rates. Until now, it appears that a chemical reaction rate expression that is not zero or first order directly, must be handled by a numerical scheme.

Presented herein is a mathematical model with an analytical interwafer concentration profile. This concentration profile is neither zero nor first order but shifts from zero to first order as …

Nucleus 1991, Developing A Unique Style, New Jersey Institute Of Technology

Yearbooks

This is a digitized, downloadable version of the New Jersey Institute of Technology Nucleus.

Investigation Of Stagnation Flow Heat Transfer For A Heated Horizontal Round Plate, Ching-Hua Wei

Dissertations

The heat transfer characteristics in stagnation flow are investigated through three cases in this study. The first is forced convection by an array of air jets; the second is free convection of a downward-facing heated round plate; the third is free convection of an upward-facing heated round plate.

The first case is investigated by systematic experiments which examine the heat transfer characteristics mainly by five air jets impinging normally to a flat plate, with varying nozzle diameters, and Reynolds numbers, at different distances between the nozzles and the plate. The empirical formulas of heat transfer around the stagnation point and …

Graphical User Interface For Image Processing, Kumar Chebrolu

Theses

A user friendly, menu driven, highly interactive X Windows package for Image Processing Applications using Motif Widget Set under Motif Window Manager is developed. Modules related to Segementation, Enhancement, Representation, Transformations are developed. The above routines are useful for image manipulation. The current gray scale/binary image is displayed on the window. Online histogram is provided so that the user can change the threshold value interactively. The OSF/Motif toolkit is used efficiently and also Xlib calls to display the image by allocating colormap. An on-line image manipulation help menu facility is incorparated in the tool to make it more versatile.

Performance Analysis Of Symbol Timing Recovery Circuits Employed In Digital Communications Systems, Elisha Yegal Bar-Ness

Theses

An analytical approach is presented for the jitter performance of a timing recovery circuit consisting of a prefilter, a zero-memory nonlinear device, and a narrow band postfilter tuned to the pulse repetition frequency. Assuming first a squarer type of nonlinearity, analytical expressions for the rms jitter in the timing wave are obtained as a function of the pre and post filtering characteristics. These expressions are suitable for judging the case where the baseband signal is bandlimited. Also for some specific examples, the jitter performance of this kind of STR circuit is evaluated.

Secondly, a general type of nonlinerity is assumed, …

Development Of A Classification And Coding System For Computer-Aided Process Planning, Shilpan K. Patel

Theses

The chore of this work was to develop a Group Technology Classification Code which can represent the full gamut of simple, rotational parts. The automated coding plan is developed to alleviate the endeavor of the process planner to plan the tasks related to the manufacturing of a specific part. The 15 digits were devised from the Japanese KK-3 Classification and Coding system. The KK-3 System contains 21 digits. Our aim is to minimize the code length, and concurrently to eliminate the redundancies. As a result, a 15 digit G.T. Code is created. The proposed plan also generates the operation logic …

Dynamic Analysis Of The Generalized Slider Crank, Sahidur Rahman

Theses

A numerical technique is used to analyze the kinematics of the generalized slider crank mechanism and an analytical technique to derive dynamic force equations for that mechanism has been formulated. The numerical technique used for displacement analysis is based on a combination of Newton-Raphson and Davidon-Fletcher-Powell optimization algorithm using dual-number coordinate-transformation matrices. Velocity analysis is performed by using a dual number method. Finally, dynamic force analysis is accomplished on the basis of the dual-Euler equation and D'Alembert's principle. The approach is developed in such a manner that a digital computer can detect when a solution is possible and then solve …

Task Scheduling For Fms Based On Genetic Algorithm, Hung-Yuan Li

Theses

A Flexible Manufacturing System (FMS) consisting of p automated guided vehicles (AGV's), m workstations and n tasks is studied. The main problem investigated in this thesis is to find an optimal or suboptimal task scheduling for p AGV's among m workstations to complete n tasks.

An efficient approach based on genetic algorithms has been designed and implemented to solve the problem of task scheduling for a FMS. Near-optimal, or even optimal, task scheduling is accomplished by genetic algorithms. Simulation results on the algorithm are also discussed.

Petri Net Modeling And Analysis Of An Fms Cell, Paresh A. Patel

Theses

Petri nets have evolved into a powerful tool for the modeling, analysis and design of asynchronous, concurrent systems. This thesis presents the modeling and analysis of a flexible manufacturing system (FMS) cell using Petri nets. In order to improve the productivity of such systems, the building of mathematical models is a crucial step.

In this thesis, the theory and application of Petri nets are presented with emphasis on their application to the modeling and analysis of practical automated manufacturing systems. The theory of Petri nets includes their basic notation and properties. In order to illustrate how a Petri net with …

Off-Line Programming Using Igrip, Narahari K. Bhandary

Theses

AT&T's FWS-200 (Flexible Work Station) has been modeled and simulated to implement Off-Line Programming (OLP). IGRIP (Interactive Graphics Robot Instruction Program) from Deneb Robotics, Inc. has been used to simulate the FWS operation.

A GSL(Graphics Simulation Language) program has been used to simulate the chip placements during PCB assembly. The program leads the user through the motions of chip placement, and after the simulation run downloads the motion sequence to the FWS. The animation sequences of the FWS have been downloaded to the FWS on the Factory Floor using a C program, which is utilized to communicate the data to …

Biological Coal Desulfurization, Ming Le

Theses

Sulfur removal from coal before combustion is of considerable interest to avoid emission of oxides of sulfur(SO_x). Chemical and physical methods have been developed for removing the inorganic sulfur component in coal. This component is generally associated with pyrites(FeS2). However, no commerical methods have been developed for the removal of the organic sulfur conponent. This study describes microbial methods for removing organically bound sulfur from coal. The specific goals of this study were to ascertain whether a robust biologically active population such as activated sludge biomass can remove organic sulfur from coal and to devise sulfur analytical methods …

A Parallelogram Four-Frame Model In 3-D Motion And Structure Recovery Using Unified Optical Flow Field Approach, Zhichun Lin

Theses

In this paper a new concept of the unified optical flow field (UOFF) for 3 D motion analysis from a stereo image sequence is implemented which is an extension of the temporal optical flow formulations developed by Horn and Schunck. A four frame model is established and a spatial optical flow is also introduced.

In order to alleviate the problem of the strict requirement of two identical sensors in common stereo imagery a new imaging system is presented in this paper that needs only one camera, two plane mirrors and two switches to generate a phase shifted binocular sequence of …

Size Reduction Of Polymeric Particulates By Jet Milling, Cheng Hua

Theses

A basic theory for the size reduction operation by jet milling has been developed.

Typical samples of feedstock have been analyzed using screen analysis to determine the initial distribution of polymeric particulate sizes prior to jet milling.

A statistical theory .was developed using probabilities to represent the likelihood that specific size reductions would occur. These probabilities include the effects of various equipment.

The theory was then used to predict the distribution of polymeric particulate sizes after jet milling. The agreement between the predictions and actual results was within 5 %.

Encouraged by the successful work of the simulation of the …

Burn Wound Healing Evaluation By Infrared Imaging, Shang-Yuan Chen

Theses

Infrared imaging is a pictorial method of temperature representation. Its advantage in the treatment of burns is that it is a non-invasive, safe and reliable method for estimating the area, temperature and depth of burns. An Imaging Burn program was developed for comparing changes in burn area in response to treatment with time. The program proved itself capable of determining the surface area of simulated lesions on the skin of human volunteers to within an error of 1.6 percent. The size and temperature of burn lesions in patients was recorded. First degree burns were warmer than surrounding areas of normal …

Isolation And Characterization Of A Crude Extracellular Phenol Oxidase From A Recirculation Bioreactor, Yun Tang

Theses

The study of phenol biodegradation has been performed using calcium alginate entrapped activated sludge in a recirculation reactor. An effective recirculation reactor system may be used on the laboratory scale to produce phenol oxidase, Phenol oxidase was isolated and concentrated from the degradation solution of phenol by ultrafiltration and freeze-drying respectively,

The effects of various concentrations of phenol, pH, temperature, ionic strength, cations, anions and 2- chlorophenol were studied on the oxidation reaction of enzyme. The optimal conditions of activated sludge phenol oxidase are [phenol] = 100 ppm; pH = 6.0; temperature 37°C; ionic strength equivalent to 0.1 M Na …

Experiments In Aerobic And Anaerobic Biodegradation Of Methylene Chloride Using Activated Sludge, Vivek Chandrakant Sinkar

Theses

Biological removal of methylene chloride was studied under aerobic and anaerobic conditions using activated sludge cultures. Shaker flask experiments were conducted to test the ability of the microorganisms to degrade methylene chloride under aerobic conditions. Hydrogen peroxide was used a as source of dissolved oxygen to minimize physical removal of methylene chloride due to aeration. The effect of secondary substrates like glucose, cellulose acetate, ammonium acetate and nutrient broth on biodegradation of methylene chloride was studied. Biodegradation in the presence of surfactant and alkaline stress was also investigated.

No significant degradation was observed in all aerobic experiments.

Anaerobic sludge was …

Acid Recovery Of Cadmium And Lead From Immobilized Activated Sludge Used To Biosorb Metals, Chandrakanth Hartman

Theses

A study of the adsorption and subsequent desorption of heavy metals using various concentrations of hydrochloric acids has been performed.

To accomplish this task, the following areas were investigated : immobilization of the sludge, adsorption of heavy metals, various concentrations of acid used as stripping agents, examination of the relative fractions of heavy metals obtained using various stripping agents, and the actual concentration of the acid at a particular fraction.

It was observed that water helps in extraction of cadmium to a certain extent, but lead cannot be extracted with water. Also, water mixed with dilute hydrochloric acid is more …