Digital Commons Network^™

Posterior Stabilized Knee Design Biomechanical Considerations, Donald E. Mcnulty

Theses

Numerous posterior stabilized knee systems are available for primary and revision total knee arthroplasty. Design of these systems requires an understanding of the articulating geometries and kinematic/kinetic biomechanical considerations of the normal knee. The findings for the normal knee are integrated into the design of a prosthetic system.

The natural femoral, tibial and patella articulating geometries are defined to enable subsequent kinematic and kinetic analyses. The articulating geometries are characterized from review of anthropometric studies of the tibiofemoral and patellofemoral joint.

The kinematic analysis of the natural knee defines knee motion in terms of rotation, adduction/abduction, range of motion and …

Character Recognition Using String Matching, Xiaozhi Ye

Theses

To handle noisy and distorted pattern is the use of similarity or distance measures. A similarity or distance measure can be defined between a representation of an unknown pattern and a representation of a prototype pattern. Recognition of the unknown pattern can be carried out on the basis of the maximum-similarity or minimum distance criterion (Bunke 1990) This approach is proposed to recognize the noisy or distorted character image. In this work, a directly string representation of the pattern ( prototype as well as unknown input) using the histogram method, a decision procedure for classification is the well known Levenshtein …

Planning Of Optimal Transit System Design, Yongning Liu

Theses

This study presents a methodological approach for finding an optimal design of bus transit service in an urban transportation corridor with elastic demand and under various objective functions. Service design decision variables to be optimized include the route length, route density, headway, number of stops and stop spacing pattern. The objective functions that optimize the transit system design include: minimizing operator cost, maximizing profit, minimizing sum of operator and user costs and maximizing the users' net benefits.

The analysis uses an elastic demand function wherein the number of trips are sensitive to the quality of service provided and price charged …

Adaptive Map Configuration And Dynamic Routing To Optimize The Performance Of A Satellite Communication Network, Santhalingam Balasekar

Theses

Availability of alternate routes are shown to enhance the performance of non-hierarchical circuit switched networks at moderate load conditions on which the networks typically operate. But alternate routes introduce instability at heavy and overloaded conditions and at these load conditions the network performance is found to deteriorate. To alleviate this problem, one of the control mechanism used is to reserve a fraction of the capacity of each link for direct routed calls. In this work, the feasibility of changing the facilities of a satellite network is taken advantage in optimizing the performance of such a network. A mesh connected, circuit …

Computation Of Collision Parameters Of Spheres By Computer Vision, Sumit Sen

Theses

Collision parameter evaluation of rigid spherical particles requires estimation of pre- and post-impact position, velocity and angular velocity vectors of colliding particles. A three dimensional experimental technique is devised where the instantaneous position and orientation of the particles are determined by analyzing frames obtained through high speed video imaging system. Since the image obtained is two dimensional, a mirror setting is designed to capture two orthogonal views of collision in order to estimate motion in depth. The translational velocity vector is determined from the position information extracted through application of available image analysis techniques over two time frames of digitized …

Determination Of Pentachlorophenol In Wood And Leachate From Discarded Treated Wooden Poles, Yan Zha

Theses

Pentachlorophenol(PCP) has long been used as a preservative in the wood industry. The disposal of the used treated wood poles in landfill is of an environmental concern.

The study presented in this paper was designed to determine the leaching of pentachlorophenol from treated aged wood. An analytical method for HPLC determination of PCP was developed and validated to perform the analysis of pentachlorophenol in samples of the oringinal wood and leaching solutions.

Further studies involved the description of the PCP distribution in wood poles, the estimation of the leaching rate of PCP and the factors which influence the leaching rate …

Domain Analysis Within The Gensif Framework, Heiko Thimm

Theses

The GenSIF framework which is targeted towards very large, distributed, and complex software systems recently has been proposed to accomplish a form of systems engineering and systems development in which the issue of systems integration is considered from the beginning on.

One of the components of GenSIF is domain analysis. Domain analysis leads to the design of a domain model. The specific needs GenSIF has in that area were investigated with an emphasis on domain modeling. Main points addressed in that investigation were the issue regarding the relevant information for the domain modeling process and the required type of domain …

Performance Analysis Of Queueing Systems With Synchronous Server, Wonmu Hur

Theses

The performance measures are derived for a queueing system which is characterized by its synchronous server operations. This property is the one which normal queueing systems lack. A system of this nature contains a single common server to which multiple number of buffers are connected in parallel, where the server operates only when all system buffers are occupied.

In this thesis, the analysis is carried out focusing on the simplest system involving only two buffers. Throughout the analysis, a symmetricity of the system is assumed (i.e., system is symmetrical in terms of arriving customer statistics.). Also assumed are the Poisson …

Bacterial Biosorption Of Heavy Metals From Liquid Wastestreams, Emilia Rus

Theses

In this study, immobilized activated sludge from a municipal wastewater aerobic treatment plant has been evaluated as a potential biosorbent for the removal of heavy metals from liquid waste streams. The method of immobilization consists of entrapment of the microorganisms in calcium alginate beads.

The affinity of immobilized activated sludge to cadmium, lead, chromium and copper has been evaluated under well defined laboratory conditions.

Initially, the time course of metallic ions uptake and the effect of pH and temperature on biosorption were studied for each metal. Then the biosorption pattern and the effect of biosorbent concentration on binding capacity were …

Mathematical Model And Simulation Of The Progression Of Cutaneous T-Cell Lymphoma, Maria L. Agostinho

Theses

A simple mathematical model and simulation of the progression of cancer with particular emphasis on Cutaneous T Cell Lymphoma was investigated. The mathematical model consists of a set of differential equations that first satisfies the homeostasis levels of the different components present and second predicts the dynamics during a diseased or unhealthy condition. The simulation was done using a FORTRAN program for integrating the differential equations.

Simulation of the immune system is important in evaluating the usefulness of particular sorts of biologically targeted therapies and in selecting the most promising treatment strategies for clinical trials. In particular, the effects of …

Thermal Decomposition Of Dichloromethane In Absence And Presence Of Added Oxygen And/Or Methane, Hong-Ming Chiang

Theses

Thermal decomposition experiments on dichloromethane in absence and presence of added O₂ and/or ₄ and in argon bath gas were conducted in a tubular flow reactor. The thermal reactions were studied at 1 atmosphere pressure with residence times of 0.3 - 2.0 seconds in the temperature range from 680 to 840 °C.

The degradation of dichloromethane and the decomposition product distributions were studied in both oxidative and pyrolytic reaction environments. The slowest decay of dichloromethane occurred when CH₄ was present and 02 was absent. The concentration of all products, (except HCl, CO, and CO₂ in the oxidation), …

Synthesis Of Bisphenol A Bis-2-Hydroxypropylmethacrylate (Bisgma) And Diethylchlorophosphate And 2-Hydroxyethylmethacrylate (Decp-Hema) And Preparation Of Dental Adhesives, Da Xie

Theses

BisGMA and DECP-HEMA were separately synthesized from Bisphenol A and glycidyl methacrylate and from diethylchlorophosphate and 2-hydroxyethyl-methacrylate. The structure of the monomer, BisGMA, was further analyzed by means of chromatography, VPO, IR, FTIR and GC-MASS.

Based on the main monomers, BisGMA, DECP-HEMA and an organosilane compound, a dental adhesive has been formulated. Although the tervile strength of the adhesive has been found to be not as good as the adhesive formulated by a previous worker (student), its applicability to teeth is more suitable for clinic practice.

Development Of The Interface Between Cad And Waterjet Nc Systems, Sivayasivan Sambandan

Theses

There has been a continuous need in the present to develop softwares that provide interface between cutting machines and computer control. There involves a number of complex stages from the birth of an algorithm, to develop such software, till the end where it successfully gets tested and implemented. Cutting Path Simulation (CPS) is a partially developed software designed to model 2-d and 3-d objects and down load them to water jet cutting machine. Additional menus were created in the software to perform specific functions. Bugs that existed in the previously done work were removed. Investigation was conducted on the feasibility …

Three-Dimensional Beam-Columns, Mohammad Hassan Shams

Theses

This thesis explores several special cases of three-dimensional beam-columns and suggests that the method of finite differences can be used when a solution of general case is required. The thesis begins with a review of the three-dimensional beam-column equations and then shows how these equations can be used to generate the member stiffness matrix for the nonlinear analysis of three-dimensional frames. Examples are included which discuss the differences between the analytical and numerical solutions.

Application Of Desktop Manufacturing System (Sla) For The Manufacturing Of A Centrifugal Pump Impeller Using Cad (I-Deas), Wasimuddin Azam Muhammad Syed

Theses

Desktop Manufacturing (DTM) systems which combine personal computer, laser and other technologies are being used to sculpt objects from computer generated models created on computer aided design (CAD) workstations. As a member of DTM systems, StereoLithography Apparatus (SLA) transforms 3-dimensional designs into a 3-D output. This can substantially reduce the time required to produce a prototype through the process of photopolymerization. The process involves the transfer of a liquid plastic monomer into a solid polymer by exposing it to ultraviolet light.

Although the process looks productive, inefficiencies can occur, if incorrect parameters are selected before its application for a particular …

Modeling, Evaluation, And Control Of A Flexible Manufacturing Cell Using Petri Nets, Glenn Arthur Thorniley

Theses

This thesis describes the usefulness of Petri nets in modeling, evaluating, and controlling a Flexible Manufacturing Cell (FMC). The basics of Petri net theory are explained and a specific FMC is examined. First, the FMC is modeled. The purpose of modeling is to facilitate the evaluation and provide a framework on which the control methodologies can be applied. The objective of the evaluation is to determine how the FMC would benefit most by replacing or adding equipment. Several ideas on control are combined to form a useful framework for the designing of the control net. With this framework the control …

Catalytic Ozone/Ultraviolet Light Oxidation Of Organics In Water : Integrated Charcoal/Ozonation/Uv Radiation, Dawei Wang

Theses

A novel heterogeneous catalytic-oxidation technology where activated carbon is used as a catalyst-adsorbent, ozone serves as the oxidant and UV light as activation agent, is developed in a lab scale study. We demonstrate this process for destruction of recalcitrant organics in water i.e: combined oxidation by ozone, UV light plus activated carbon. The investigation includes evalution of various operating conditions: ozone levels, activated carbon levels; time for complete destruction of the individual target pollutants, plus evalution of activity of the continuously recativated carbon surface in-situ. All experiments were performed at room temperature in a semi-batch reactor. Seven representative chemicals was …

Design And Implementation Of Two Text Recognition Algorithms, Madhumathi Yendamuri

Theses

This report presents two algorithms for text recognition. One is a neural-based orthogonal vector with pseudo-inverse approach for pattern recognition. A method to generate N orthogonal vectors for an N-neuron network is also presented. This approach converges the input to the corresponding orthogonal vector representing the prototype vector. This approach can restore an image to the original image and thus has error recovery capacility. Also, the concept of sub-networking is applied to this approach to enhance the memory capacity of the neural network. This concept drastically increases the memory capacity of the network and also causes a reduction of the …

Instrumentation For The Characterization Of 10 Micron Focal Plane Array Detectors, Zhen Zong

Theses

In the atmospheric window thermal imaging technology, the 8-12 micron spectral range is of particular interest, since the 300 K black body radiation peaks at around 10 micron with a flux as large as 1019photons/cm2sec. Due to its extreme temperature sensitivity for the 300 K background imaging, this long wave length infrared atmospheric window is vital for a variety of applications. A monolithic GaAs multiple quantum well (MQW) IR image sensor in this spectrum region is being developed in the research group of Profs. K. Chin and J. C. Hensel.

The work performed here is to set up a computer-controlled …

Automatic Motion Analysis Of Colliding Spheres, John Vijayakumar Caesar

Theses

Motion analysis is useful to compute linear and angular velocities and acceleration of an object from a sequence of images. This thesis is part of an investigation to compute the translation and rotation velocities needed to determine the collision parameters of two colliding spheres. This involves the tracking of the spheres and feature points on the spheres over a time interval. An experimental setup releases two spheres such that they collide and a high speed imaging system, i.e., Kodak Ektapro 1000 is utilised to record the motion of the spheres. The imaging system is capable of recording at a speed …

A Theoretical Study Of The Subband Structures And Tunneling In Polytype Heterostructures, Hong Chen

Theses

A theoretical study of the electronic and optical properties in polytype heterostructures is presented in this thesis.

In the first part of the thesis (Chap. 2 and Chap. 3), an explicit expression for calculating the subband structure and tunneling is formulated by the incorporation of the envelope function approximations and the transfer matrix technique. It is based on the k*p theory as done to date, but contains two significant improvements: a more realistic treatment of the spatial and energetic dependance of effective masses and band edges; the availability of the calculations, in favor of direct numerical evaluation, to various quantum …

Porting Cosmos Expert System From Unix To Dos, Ching-Jeng Chiu

Theses

COSMOS is an object-oriented Knowledge Based System building Tools (KBSTs) to solve problem in engineering industry. COSMOS stands for C++ Object-oriented System Made for expert System development.

In order to provide more people those who don't have a Sun workstation to use this expert system, our task is porting COSMOS form UNIX to DOS.

Because the differents of workstation environment, the user interface and structure of original COSMOS no longer can be used, therefore we made some necessary change before we porting it to IBM Personal Computer.

In stead of X Window system®, we implemented ObjectWindows® runs on Microsoft WindowsTM. …

Uses And Applications Of Artificial Intelligence In Manufacturing, Manojkumar H. Desai

Theses

The purpose of the THESIS is to provide engineers and personnels with a overview of the concepts that underline Artificial Intelligence and Expert Systems. Artificial Intelligence is concerned with the developments of theories and techniques required to provide a computational engine with the abilities to perceive, think and act, in an intelligent manner in a complex environment.

Expert system is branch of Artificial Intelligence where the methods of reasoning emulate those of human experts. Artificial Intelligence derives it's power from its ability to represent complex forms of knowledge, some of it common sense, heuristic and symbolic, and the ability to …

Modification, Reimplementation And Studies Using The Meisner Model Of The Heart, Ari Zvi Zivotofsky

Theses

The study of left ventricular filling in both the normal and the pathological heart is of great importance. A computer model simulation of the heart with emphasis on mitral flow was designed by Meisner in 1986 and implemented in QuickBASIC. This paper discusses how the original program was altered to be able to perform "Parameter vs. Parameter" runs in which it can be observed how varying an input parameter affects output parameters. The output data is then formatted in such a way that it can be used by QUATTRO PRO, a standard spreadsheet package, to yield graphical outputs.

In addition, …

Investigation Of Waterjet-Workpiece Interaction, Hung-Yuan Li

Dissertations

The objective of this research is to develop new knowledge related to the fundamental physical phenomena of waterjet machining of ductile materials, and to use this knowledge to construct a numerical analysis model. The resulting knowledge will enable enhancement of waterjet cutting efficiency.

Experimental study of fundamental mechanisms and the acquisition of the data detailing micro and macro scale phenomena which occur during the machining process is carried out. It is shown that the material damage mechanism associated with waterjet machining is erosion cavitation which initiates ultrasonic stress wave propagation in the workpiece. Fatigue, an important element in producing material …

Development Of Prediction Technique For The Geometry Of The Abrasive Waterjet Generated Kerf, Yichung Chung

Dissertations

This study is concerned with the development of a practical and accurate technique for off-line determination of the variables characterizing the macro-geometry of the kerf generated in the course of abrasive waterjet (AWJ) machining of ductile materials. The study involved generation and processing of a database relating operational conditions with kerf dimensions. The total number of generated samples exceeded 1500.

A physical model relating the process results with operational conditions was constructed and used for the selection of a statistical technique for analysis of the acquired experimental information. The semiempirical model developed here is based on a simple theoretical model …

Performance Evaluation Of Spread Spectrum System With Cochannel Interference Through A Nonlinear Channel, Yong H. Kim

Dissertations

This thesis deals with the problem of more than one subscriber transmitting data signals through a common satellite repeater using code division multiplexing to separate the signals. We are concerned with the problem of amplifying two DS spread spectrum signals, both QPSK or BPSK modulated, in a common device in which limiting occurs. One signal is considered the signal we desire to receive, and the other, having the same nominal carrier frequency with a small random offset, is considered to be a cochannel interferer. The case of a cochannel interferer on the uplink and downlink in QPSK signalling and BPSK …

Structural Reliability Using Finite Element Method, Che-Chen Liou

Dissertations

During the last decade, structural reliability theory has been treated in a large number of research papers; therefore, from being a subject only well known by a relatively small number of researchers, it has become an important engineering discipline. From the application point of view, many practical applications have been made successfully.

In this dissertation some important fundamental concepts in statistics and in reliability theory are presented. The concept of failure mode can be defined as: A set of failed elements turn a structure into a mechanism. Usually, a structure has many possible failure modes; therefore, it will be necessary …

A Modified Approach To Flood Prediction In Urban Watersheds, Joseph Ofungwu

Dissertations

The purpose of this dissertation was to develop a better method for dealing with the problems of flood prediction in Urban Watersheds. It has long been realized that urbanization activity such as increased imperviousness, drainage improvements, etc. increases runoff volumes. Therefore, traditional flood prediction methods using the Log Pearson III distribution underestimate flood frequencies when applied to urban watersheds without modification.

In attempt to compensate for the effects of urbanization on streamflow, previous workers usually employed regional analysis techniques involving a number of different watersheds at various degrees of urbanization. Results obtained by this approach leave room for improvement primarily …

1992 Nucleus, Designing The Future, New Jersey Institute Of Technology

Yearbooks

This is a digitized, downloadable version of the New Jersey Institute of Technology Nucleus.