Digital Commons Network^™

Dynamics Of Blood Coagulation, Jie Gao

Theses

In this paper we present a new method to analyze whole blood coagulation dynamics. Using a PC-286 computer equipped with a DASH-16 AID board.

The row data from a SONOCLOT analyzer is amplified and digitized on the DASH-16 A/D board and stored in the PC-286 hard disk. The data is filtered through a digital Butterworth filter. The filtered data is then fit to mathematical relationship by the least square method. The coefficients which define the mathematical relationships are used to identify blood specimens with normal coagulation dynamics as distinguished from specimens with abnormal dynamics.

The digital filter and curve-fitting routine …

Microwave Gaas Mesfet Nonlinearity And Large-Signal Modeling, Yan He

Theses

The nonlinearity analysis for a 0.5μm gate length microwave GaAs metal-semiconductor field-effect transistor (MESFET) by HP85150B Microwave Design System was investigated. The analysis starts with the construction of a large-signal MESFET equivalent circuit model. This model consists of bias dependent elements that were extracted by the optimization of DC and small-signal S-parameter measurement data. The details on this construction procedure are included in this work. The MESFET third-order intermodulation distortion was then simulated by HP85150B Microwave Design System. Reasonable agreement was obtained between simulation and measurement results. Microwave GaAs MESFET nonlinearity principles and large-signal modeling technique review are also presented. …

Computerizing Occupational Safety And Health Information, James Luke

Theses

Various regulations increase the responsibility of employers to retain appropriate safety and health information, for as long as several years. Handling this increasing volume of safety and health information manually is impractical, time consuming and hence, not at all cost effective.

The purpose of this research is to examine the various aspects of computerizing safety and health information, and to evaluate a number of commercially available safety software packages.

This paper initially discusses the impact of OSHA on retaining safety and health information, and the different areas which can benefit from computerization. It also provides guidelines to analyze existing safety …

Forward Kinematics Solution Of A Special Class Of General Stewart Platforms, Jian Li

Theses

A Stewart platform is a fully parallel, six-degree-of-freedom manipulator mechanism. A platform manipulator has a fixed platform acting as base, a mobile platform on which end-effector is mounted, and in-parallel kinematics chains (legs) between the two platforms. Although some direct position kinematics solutions for Stewart platforms of simplified geometry have been represented, to the best of our knowledge, no close-form direct kinematics solution for the general Stewart platform is available yet.

A common feature of six-degree-of-freedom Stewart platform of simplified geometry is the use of pairs of concentric ball joints. Due to inevitable manufacturing and assembly errors, practically there are …

Systems Integration In Pharmaceutical Industry Using Object-Oriented Expert System Technology, Korrapolu Reddy

Theses

SPHINX is an object-oriented expert system addressed to solve the burning problems of pharmaceutical industry. SPHINX stands for Systems integration in PHarmaceutical INdustry using object-oriented eXpert system technology.

Various problems that American pharmaceutical industries are facing have been explained. Using the revolutionary object-oriented concepts and the powerful expert systems technology, it has been shown how a prescription can be written to solve all the problems of pharmaceutical industries. A problem "Minimizing the wastage of Interferon" has been taken to demonstrate the power of Object-oriented Expert System technology.

Development Of A Composite User Equilibrium And System Optimization Assignment Model, Kimberly M. Stump

Theses

The Urban Transportation Modeling System (UTMS) is a set of procedures used by transportation planners to predict the volume of traffic that will flow through a network, and how the traffic is routed. This paper will focus on the final component of UTMS, traffic assignment, which assigns the traffic flows to actual routes in the network.

In this paper, two composite models which model both User Equilibrium and System Optimal assignments are presented. The composite models are solved using the GAMS (General Algebraic Modeling System) software, a powerful mathematical programming tool. The first model was based on Beckman's Formulation, (Beckman, …

Reduction Of Acoustic Feedback Oscillations By Use Of Spectrum Shifting, Youssef Abdelilah

Theses

The problem of whistling noise or self-oscillation in public address systems operating in closed halls or rooms can be very disturbing to the listeners. This noise is sustained when the positive acoustic feedback, of the public address-room system, meets the oscillation criteria. This feedback system results from the acoustic sound signal reflected off the room walls and any other obstacles in the room, originating from the public address speakers and then re-entering the microphone.

When all of the audio signal components entering the public address system are shifted by a frequency increment Δf of 6 Hz, an increase of 5 …

Studies Of Wet Thermal Oxidation Of Silicon And Porous Silicon, Nilesh A. Gharia

Theses

Wet Thermal Oxidation of Silicon in VLSI is an extremely important step in the formation of field oxides. Understanding oxidation kinetics is critical for process reproducibility. The present study aims at gaining an insight into the oxidation kinetics through large experimental data at process temperatures of 800°C, 900°C, 1000°C and 1100°C with a bubbler temperature of 98°C. Oxides with thicknesses ranging from 100A to 7000A have been grown. Rate constants are obtained for the growth kinetics. Extensive characterization studies have been performed on MOS structures produced after wet oxidation.

In addition, porous silicon which assumes a growing significance in the …

A Review Of Energy Storing Prosthetic Feet And Computer Aided Structural Optimization Of A Below-Knee Prosthesis, Poonam Gope Lalwani

Theses

Because people with physical disabilities have shown an interest in participation in sports, a new class of prosthetic feet known as "energy storing prosthetic feet" has been developed. These new developments in prosthetic foot design utilize energy storage and return to improve ambulation. This thesis reviews the design, materials, advantages and disadvantages of various energy storing prosthetic feet. Research studies, comparing gait in below-knee amputees using different prosthetic designs, can be applied to the design of prosthetic feet that are lighter, stronger and more reliable. Comparisions among these feet are reviewed in the context of functional capability and patient satisfaction. …

The Thermal Model Of The Rat Under Hemorrhagic Shock Hypothermia With Microwave Intervention, Liu Zhe

Theses

A whole body thermal model simulating heat distribution and temperature regulation in rats during hemorrhagic shock and during post-shock microwave core rewarming period was developed. An electrical circuit was used to simulate the thermal system and a software named PSpice? was used to analyze the circuit. The temperature regulation as the result of the simulation is demonstrated to match the measured temperature histories of rats in hemorrhagic shock and the microwave rewarming experiment.

The blood pressure drop and cardiac output decrease were considered in the simulation and the so called "set point temperature" was investigated in the model. Linear decrease …

A Planning Model For Intermodal Auto-Rail Transportation Assignment, Daniel Disario

Theses

This thesis presents a planning model for assigning trips in a corridor served by highways and commuter rail. The underlying assumption is that commuters will choose a mode (or a combination of modes) connecting the origin and destination in a way that will either minimize their individual travel times and costs (the user equilibrium principle) or minimize total system travel time and cost (system optimal principle). The model is structured as a mathematical program with a non-linear objective function and linear constraints.

The model was applied to a case study of the Raritan Valley Corridor located in Northern New Jersey. …

Reverse Engineering : An Evaluation Of Contact Technology And Application In Manufacturing Systems, Shailesh V. Jadhav

Theses

There are many instances where one-of-a-kind parts, such as prototypes or custom-built parts, need to be reproduced. When a Computer Aided Design (CAD) of an existing part is not available, reverse engineering is involved in recreation of such part. Currently, geometric measurements from the surface of a prototype are extracted manually and sent to a CAD system. It is typically time consuming, tedious, and potentially a source of error. This study outlines a methodology, for the development of a CAD model, rapid prototype, and subsequently manufacturing of the part. The method developed uses a contact technique to extract 2-D or …

Trouble Shooting In Plastic Injection Molding Machines, Zafar Kamal

Theses

The purpose of this thesis is to find the solution of those problems which occur during plastic injection molding process. Molding cycle problem analysis is an important field in plastic injection process. It is very necessary to catch the problems during operation. Therefore on the basis of research trouble shooting criteria is prepared.

Good quality control is an essential feature for finding any sort of fault. Quality control is associated with each and every step of operation to maintain the required shape and surface finishing.

Most of the molding problems are solved by varying the machine conditions and by changing …

An Enhancement And Improvement Of A Prototype Distributed System Based On Elements Of An Integration Architecture, Kunal R. Shah

Theses

The concepts and results presented in this thesis are related to Integrated System Development. It provides introduction to Generic System Integration Framework (GenSIF). And hence its three principal components, Domain Analysis, Integration Architectures and Enabling Technology. It addresses certain issues of distributed processing relating to systems integration.

The primary objective of this thesis is to develop/improve a prototype by applying concepts and ideas presented in GenSIF, with an example channel based building block integration architecture as an example. This prototype was developed with the objective of studying the effect of system intregration framework in mind while working on an application. …

The Flow Approach To Swept Volume, Haitao Jiang

Theses

In this thesis, a method for representing swept volume based on the sweep differential equation and sweep vector field flow is developed. This method can be used to determine the boundary representation of a swept volume generated by any polygonal object undergoing a general smooth 2-D sweep. For any given sweep and object, a. set of candidate boundary points is computed using a selection criterion based on vector field behavior. The set of candidate boundary points is then trimmed in order to obtain the true boundary of the swept volume. This trimming procedure is based on some simple topological principles …

Performance Analysis Of Pyramid Mapping Algorithms For The Hypercube, Jing-Chiou Liou

Theses

Comparative performance analysis of algorithms that map pyramids and multilevel structures onto the hypercube are presented. The pyramid structure is appropriate for low-level and intermediate-level computer vision algorithms. It is not only efficient for the support of both local and global operations but also capable of supporting the implementation of multilevel solvers. Nevertheless, pyramids lack the capability of efficient implementation of the majority of scientific algorithms and their cost may become unacceptably high. On a different horizon, hypercube machines have widely been used in the field of parallel computing due to their small diameter, high degree of fault tolerance, and …

Stepwise Reduction And Approximation Method For Performance Analysis Of Generalized Stochastic Petri Nets, Jinming Ma

Theses

This thesis delves into the performance analysis of generalized stochastic Petri net (GSPN) model by using an approximation method: the Stepwise Reduction and Approximation (SRA) Method. The key point is that we are able to analyze a subnet in isolation by keeping its token flow direction and its sub-throughput equivalent with all the possible tokens entering into the subnet. The thesis first defines various kinds of potentially reducible subnets, subnet selection rules, approximation subnet construction rules, and reduction evaluation rules. Then corresponding to the possible subnets, the approximation method is used stepwisely until the interested measures are found with the …

Modal Control Of Flexible Beam Using Smart Mateirals, Sujata Mallepalle

Theses

In this work, the dynamics and control aspects of a vibrating flexible beam using modal analysis are studied. To damp the vibrations of the system, the vibrations of each mode has to he controlled, which can he done if we know the individual mode shape. and the resonance frequency. These quantities can be derived mathematically or measured experimentally with a spectrum analyzer. Individual modal velocities can be computed by integration of the product of beam velocity and the mode shape, over the interval of beam length. The integration is carried out using numerical methods. The necessary discrete ordinates are obtained …

Protocol Conformance Test Generation Using Circular Uio With Overlapping, Sesharao Patchipala

Theses

The purpose of the protocol conformance testing is to ensure that protocol implementations are consistent with their specifications. After the U-method was introduced, several test methods based on the Unique Input/Output (UI0) sequences which were the main concept in the U-method have been proposed, namely, the RCP-method, MUIO-method, MUIO with overlapping method, B-method, C-method. A good test sequence must be short and have wide fault coverage. By comparing the test sequences generated by the above test methods based on experimental results, reveals that the test sequences by the MUIO with overlapping method are the worst in quality but their lengths …

Cause And Effect Diagrams For Process Analysis And Control, Philip Thomas

Theses

Cause and effect diagrams can be used as an effective tool for identifying the possible causes of a quality problem. Using this diagram one can go deep into the causes of the problem and take proper remedial action. Several graphical techniques like matrix diagrams, systematic diagrams, etc., can be combined with this tool to better represent the cause effect relationships. While a quantitative approach of this technique is feasible but limited, there are useful applications based on qualitative approach to this technique. The objective of this thesis is to propose a quantitative approach to the cause and effect diagrams especially …

Njit Highlanders Men's Volleyball 1993 Media Guide, New Jersey Institute Of Technology Athletic Department

Volleyball - Men's

No abstract provided.

A Theoretical Model For Biased Superlattice Devices, Michael Ferner

Theses

A model describing the subband structures and tunneling characteristics of superlattices is presented. The model solves the envelope function equations by the transfer matrix technique. The results are codified in a Fortran program, and the model is applied to several structures.

Superlattice have been studied extensively, however many new structures await investigation.

This model is presented as a preliminary design tool. The program allows a designer to do preliminary calculations. This type of investigation guides a designer toward a goal by making possible a large number of calculations on many different structures.

Graduate Catalog, 1992-1995, New Jersey Institute Of Technology, New Jersey Institute Of Technology

Course Catalogs

No abstract provided.

The Influence Of Pore Fluids On Shear Strength And Stress-Strain Behavior Of Granular Soils, Prasanna Ratnaweera

Dissertations

When a dry granular soil is subjected to an external load, the stresses are transferred through mineral to mineral contacts. The shear strength of such a soil is governed by its contact properties. Presence of a thin layer of fluid between mineral to mineral contacts in a saturated soil will alter its contact properties. Therefore any change in the physical properties of pore fluid can logically be reasoned to influence the deformation characteristics of granular soils.

To investigate the influence of pore fluid viscosity on shear strength and stress-strain behavior of a soil, a series of consolidated drained triaxial tests …

Expert System For The Injection Molding Of Engineering Thermoplastics, Tzy-Cherng Jan

Dissertations

Injection molding of engineering thermoplastics is the most widely used manufacturing method in industry. It is a priority to maintain a deviation-free operating environment to ensure high quality, low cost manufacture. An expert system for the injection molding of engineering thermoplastics has been investigated. The system can be used to attenuate the deviations experienced during the injection molding of engineering thermoplastics. The system is coded in C programming language.

The resolution procedures of this system include two stages such as the definition of declarative knowledge and the procedure of corrective actions. In the definition of declarative knowledge, all of the …

Quantitative Assessment Of Myocardial Oxygen Supply And Demand Using A Dynamic Model Of The Cardiovascular System, Badrinath R. Puranic

Theses

A quantitative understanding of the changes in coronary, pulmonary and systemic hemodynamic variables and their effect on myocardial supply and demand is important to the better management of anesthetic care of patients with impaired cardiac function. Animal studies have identified those hemodynamic factors that play an important role in determining the balance between oxygen supply and demand for the myocardium. These include myocardial contractility, left ventricular end-diastolic volume, systemic arterial pressure, systemic vascular resistance, and heart rate. The interactions of these factors are complex and their combined effects on myocardial oxygen supply and demand are difficult to predict a priori. …

Quantitative Measurement Of Pyrolysis And Combustion Species Concentration By Molecular-Beam-Sampling-Mass-Spectrometry, Xian Zhong

Theses

A molecular-beam-sampling apparatus utilizing both a time-of-flight mass spectrometer with vacuum ultraviolet (VUV) photoionization and a quadrupole mass spectrometer with electron impact ionization is described. These systems are used to analyze reactants and products, as well as reactive intermediates, from flow tube experiments at reduced pressures and elevated temperatures. It is shown that the quadrupole signal sensitivity can be predicted using literature cross sections which are based upon the atom hybridization within the various molecules. Measurements of the VUV photoionization sensitivity for stable species led to development of a group additivity approach to predict cross sections. This approach was extended …

Errors In Constant-Velocity Shaft Couplings, Philip M. Remington

Theses

A Multiloop spatial system of rotations is used to represent a shaft coupling, allowing a transmission plane which may deviate from the plane of symmetry to be specified. The plane of transmission, for intersecting input and output shaft axes, is the locus of intersections of screw axes that compose the system. By prescribing the transmission plane outside of the plane of symmetry (commonly called the "homokinetic plane" or "bisecting plane") to pecified orientations, a phase shift between the input and output shaft rotational displacements will he quantified. The rotational phase shift between the input and output shafts can be evaluated …

Point Pattern Matching By Heuristic Methods : A Genetic Algorithm And Simulated Annealing, Erh-Chin Chen

Theses

The problem we consider is to find a subset of points in a pattern that best match to a subset of points in another pattern through a transformation in an optimal sense. Exhaustive search to find the best assignment mapping one set of points to another set is, if the number of points that are to be matched is large, computationally expensive. We propose two stochastic searching techniques - a genetic algorithm and simulated annealing to search for the best ("almost the best") assignment efficiently. To make the comparison between GA and SA fair, we introduce a piece-wise linear cooling …

Automatic Surface Mount Solder Joints Inspection, Zhu Liu

Theses

This thesis reports the research results on automatic inspection of solder joints on printed circuit boards. The previous work on this subject has been advanced significantly in the following three aspects. With the support of AT&T Bell Lab, the most updated surface mount solder joints are inspected in this work instead of larger simulation solder joints or traditional through hole solder joints in the previous work. A small set of features is extracted for surface mount solder joints in both infrared and visual light inspection. A new image processing software named Khoros has been applied to improve the quality of …