Digital Commons Network^™

The Design Thing : A Study Of Design In Practice And Theory, Magd Donia

Theses

The main purpose of this study was to present an overview of design practices and theories in different domains that would enrich the perspective of architectural design. To achieve this purpose, the study presented the initial purpose of architectural design which is providing an adequate shelter for different human activities. Positive and negative aspects of shelter were briefly discussed to trace the evolution of the concept of shelter. Change, as an essential aspect of design was presented in the context of problem formulation and problem resolution.

A presentation of design practices followed. It started by presenting design practices that are …

Simulation Of Manufacturing Cell Using Hoops Graphic Software And Siman Simulation Language, Parikh Vipul

Theses

Control of jobs being processed in manufacturing shop floor is important to management. The performance of job shop is affected by shop congestion due to arrival rate, batch size, number of machines, buffer capacity, process time variation, and dispatching rules use to load the jobs on the machine.

The job shop is a very complex system and hence, it is difficult as well as time consuming to obtained result using analytical method. A SIMAN simulation language is used to create generic model of a manufacturing cell and simulation analysis of those parameters variation such as job shop efficiency, the average …

Multilevel Embeddings For Massively-Parallel Hypercubes, Devenkuma P. Shah

Theses

Hierarchically structured arrays of processors have widely been used in the low and intermediate phases of image processing and computer vision. Since the pyramid structure efficiently supports local and global operations extensively required by these phases, it has been widely used for relevant algorithms. Multilevel systems keep all the advantages of the pyramid structure while providing a general hierarchical structure that is easier to be used for the development of several algorithms and may also provide higher performance.

Although the cost of pyramid machines may be tremendously high, they have limited applications. In contrast, the hypercube network is widely used …

Implementation Of An Object-Oriented University Database Using Vodak/Vml Prototype-2/C++, Bheeman Lingan, Madhumathi Tulasiram

Theses

Object-oriented database (OODB) technology has become very popular and successful in recent years. Currently, there are many commercial object-oriented database systems available that are used for developing large and complex real world applications. In addition, there are many research prototypes of object-oriented databases available. In a joint research project of the CIS Dept at NJIT and GMD-IPSI an object-oriented data model called the Dual Model was developed. Using this Dual Model a university environment database schema was designed. This univesity database schema was implemented using the VODAK/VML OODB prototype - 1. The university database was then reimplemented using the C++ …

Bayesian Methods In Preoperative Risk Assessment For Cardiac Surgery, Huey-Chung Teng

Theses

Many strides have been made in the last decade to improve the accuracy of preoperative risk estimation, particular for cardiovascular surgery. It is our goal to estimate the preoperative risk associated with cardiac bypass surgery for patients in different risk categories. These risk categories are determined by the Parsonett model.

The Parsonett model assigns a risk value to a range of risk factors consisting of patient attributes and disease parameters. Logistic modeling is applied to generate a comprehensive risk function. The database being utilized contains over 3,000 patients who have had cardiovascular surgery within the last 5 years.

This thesis …

Mixed Culture Biodegradation Of Pentachlorophenol, Hexachlorobenzene, And Tetrachloromethane Under Anaerobic Conditions, Jesse Zahn

Theses

Three chlorinated compounds, namely, Pentachlorophenol(PCP), Hexachlorobenzene (HCB), and Carbon tetrachloride were biodegraded under anaerobic conditions using a (CCl₄)mixed culture obtained from an anaerobic sewage sludge digestor in Linden, NJ.

Three sets of cultures capable of degrading each of the target compounds were established. Primary Enrichment Cultures (PECs) from the anaerobic sludge were exposed to each one of the target compounds. The cultures were able to degrade each target compound as follows: HCB, 0 to 1.2 ppm; PCP from 0 to 3-4 PPM; CCl₄, 0.5 to 15.5 PPM

One culture from each PEC group (CCl₄, …

Comparison Of Heart Rate With Chest Wall Vibrations, Kofi M. Arbuah

Theses

A study is done using a Microwave Interferometer as a computer-assisted non-invasive cardiopulmonary monitor. The Microwave Interferometer is used to record the mechanical vibration of the anterior chest wall by recording the velocity of the displacement of the chest wall. The objective is to first, record mechanical vibrations of the anterior chest wall at different heart rates, and second, attempt to identify the relation between heart rate and chest wall vibration.

The system uses two channels, the first signal produced by the Microwave Interferometer is a record of the velocity of the displacement of the chest wall caused by the …

Implementing A Tool For Designing Portable Parallel Programs, Geetha Chitti

Theses

The Implementation aspects of a novel parallel programming model called Cluster-M is presented in this thesis. This model provides an environment for efficiently designing highly parallel portable software. The two main components of this model are Cluster-M Specifications and Cluster-M Representations. A Cluster-M Specification consists of a number of clustering levels emphasizing computation and communication requirements of a parallel solution to a given problem. A Cluster-M Representation on the other hand, represents a multi-layered partitioning of a system graph corresponding to the topology of the target architecture. A set of basic constructs essential for writing Cluster-M Specifications using PCN are …

An Implementation Of A Versatile Camera Calibration Technique For High-Accuracy 3d Machine Vision Metrology Using Off-The-Shelf Tv Camera And Lenses, Bolang Li

Theses

This thesis studies and implements a new versatile camera calibration technique for high-accuracy 3D machine vision metrology using off-the-shelf TV camera and lenses developed by Roger Tsai [1]. This technique builds up a unique relationship from the world coordinate system to the computer image coordinate system of calibration points by using a radial alignment constraint. The technique has advantage in terms of accuracy, speed, and versatility over existing techniques.

The fundamental knowledge for using this technique is presented in this thesis first, followed by an overview of the existing calibration techniques, and a detailed description of the new technique. The …

Non-Contact Measurement For Thermal Conductivity Of Diamond-Like And Hard Carbon Thin Films, Ganming Qin

Theses

In this research work, non-contact temperature measurement was applied to determine the thermal conductivity of diamond-like and hard carbon thin films. Dielectric materials widely used as thin films in device manufacturing are SiO₂, Si₃N₄, polymer, and etc. However, their heat dissipating capacity is not good for power devices. It is necessary to develop a new material for this purpose. Diamond crystal is a high quality dielectric material. It has the highest room-temperature thermal conductivity [k=20W (cm · K) at 20°C] among all materials. In addition, it has high electrical resistivity ( >10¹⁶ Ω …

Modeling And Analysis Of Semiconductor Manufacturing Processes Using Petri Nets, Xinyao Wang

Theses

This thesis addresses the issues in modeling and analysis of multichip module (MCM) manufacturing processes using Petri nets. Building such graphical and mathematical models is a crucial step to understand MCM technologies and to enhance their application scope.

In this thesis, the application of Petri nets is presented with top-down and bottom-up approaches. The theory of Petri nets is summarized with its basic notations and properties at first. After that, the capability of calculating and analyzing Petri nets with deterministic timing information is extended to meet the requirements of the MCM models. Then, using top-down refining and system decomposition, MCM …

Blur Identification And Restoration Of Images Of Coronary Microvessel, Kuen Tak Wong

Theses

The objective of this research was to identify the blur characteristics of the blurred images of the rat coronary microvessel, and the information of the blur characteristics was used to restore the blurred images. The blur characteristics were analyzed by using the image power cepstrum. The Wiener filter was implemented to restore the images. There were two types of point spread functions proposed and studied for the restoration. They were: defocus blur PSF and motion blur PSF. The images were transferred from HP A900 system to an AVS workstation. The images were processed and manipulated by the AVS, and showed …

Monolithic Silicon Opto-Electro-Mechanical Light Modulator, Ching-Horng Wu

Theses

A Fabry-Perot light beam modulator of the reflection-type has been designed with process and performance parameters optimized. This design takes advantage of the economies of surface micromaching using silicon substrates and selected thin films. High performance with a low drive voltage are achieved using electrostatic actuation of a thin polysilicon diaphragm. The diaphragm is a novel corrugated structure which has maximum compliance and maintains planarity during actuation. In addition, the corrugationsuspension used provides an improved linearity of amplitude modulation response as a function of the actuation voltage.

A preliminary version of this device has been fabricated through a contract foundry …

Analysis Of The Optimum Extraction System Design For The Separation And Purification Of Rare Earths, Kenneth Yeon-Kang Chan

Dissertations

A mathematical model for the liquid-liquid equilibrium of the lanthanide and yttrium oxides in the nitric acid - water - tributyl phosphate (HNO₃-H₂O-TBP) two-phase system has been developed. This model is based on the interrelationships of chemical reactions, phase equilibrium, and material balance. The chemical reactions were modelled using experimentally derived empirical equations for components involved. The distribution coefficients of 16 rare earths which were experimentally determined. by UK Harwell Laboratory were used to evaluate the parameters of this equilibrium model. Once model parameters are determined, material balance for all species in the HNO₃-H …

Analysis Of A Band-Saw, Suat Ali Ozsoylu

Dissertations

The solution for the transverse oscillations of a band-saw is determined. Two different models are treated: a fourth-order model and a second-order model. The response characteristics for both models are determined using Laplace transformation. To obtain the inverse Laplace Transform for the fourth-order model, it was necessary to fmd the frequencies by applying the Extended Lanczos Method in order to overcome the problem for computer overflow.

The limits of stability for both models are studied by plotting the eigenvalues against changing parameter values. Conditions for the onset of divergence and flutter instabilities, which need to be taken into account in …

Study Of Surface Properties Produced By Magneto-Plasma On Nitriding For Improving Wear Resistance, I-Tsung Shih

Dissertations

In this work a newly developed surface treatment process, Magneto-Plasma Ion Nitriding process, was developed and studied. This process was developed to increase durability and wear resistance of operational surfaces of different machine components.

In this study, orthogonal experimental analysis was used to develop, optimize, and select the process parameters. Coating layers were characterized and studied by using scanning electron microscopy(SEM), Auger electron spectroscopy(AES), and image analysis system. The influence of different process treatment parameters, such as temperature, nitrogen concentration, and magnetization, on the layers properties was studied. The mechanism of layer formation and bonding was proposed and a mathematical …

Investigation Of The Consumer Electronics Bus, Jaesoo Yang

Dissertations

The objectives of this dissertation are to investigate the performance of the Consumer Electronics Bus (CEBus) and to develop a theoretical formulation of the Carrier Sense Multiple Access with Contention Detection and Contention Resolution (CSMA/CDCR) with three priority classes protocol utilized by the CEBus

A new priority channel assigned multiple access with embedded priority resolution (PAMA/PR) theoretical model is formulated. It incorporates the main features of the CEBus with three priority classes. The analytical results for throughput and delay obtained by this formulation were compared to simulation experiments. A close agreement has been found thus validated both theory and simulation …

On Adaptive Censored Cfar Detection, Loizos Anastasiou Prastitis

Dissertations

In an automatic radar detection system the received signal in every range resolution cell is compared with a threshold to test for the presence of a target. A Neyman-Pearson type test is used which maximizes the probability of detection for a fixed probability of false alarm. For the simple case where the noise is homogeneous a fixed threshold is chosen to achieve the designed constant false alarm rate (CFAR). In the more realistic case the noise background is non-stationary due to clutter and interference. In this situation, the threshold used for testing a particular cell is usually set adaptively using …

A Petri Net Toolkit For Parallel Program Debugging, Potla Kishore Reddy

Theses

An effective debugger must support the language and operating system resource abstractions that are available to the programmer. Earlier debuggers worked at the machine architecture level: they dealt with machine instructions and registers. Current debuggers, designed for single process debugging, permit access to program variables and breakpoints and single-stepping at the level of high-level language statements. Eventhough the current debuggers, are already implemented to be a powerful tool, they still cannot do a job of parallel debugger.

In this thesis, a computer simulation system has been established by Petri Nets execution providing a convenient and friendly interface as it allows …

Networking High-End Cad Systems Based On Pc/Ms-Dos Platforms, Dagmar Antje Brinkmann

Theses

The concept of today's technology has been dropped. Everything is now either oobsolete or experimental. Yesterday's technology is appealing only because it is tried-and-true and prices are reduced for clearance. Tomorrow's technology is exciting, somewhat expensive and not well tested.

In the field of architecture, where most firms are medium or small, having limited resources, the high cost initially required for a CAD installation was generally impossible to meet not too many years ago.

From spreadsheets and CAD graphics to network file systems and distributed database management, the basic systems and application tools have matured to the point that the …

A Thermal Desorption Modulator For Continuous Monitoring Of Volatile Organic Compounds, Yun Chen

Theses

A thermal desorption modulator is made from a short segment of thin tubing containing an adsorbent or a chromatographic stationary phase. A carrier gas containing the analyte is introduced into the analytical column through the modulator which acts as a sample trap. Rapid electrical heating of the modulator releases a "concentration pulse" of the analyte and this serves as an injection similar to that from an injection valve. The modulator also acts as a sample preconcentrator and can be used to make repetitive injections every few seconds. In this research, the mechanism of thermal desorption modulator was studied and was …

Application Of Organophilic Clay, Koshy Koshy

Theses

The overall goal of this project is to asses the feasibility of using clay to filter water contaminated with organic contaminants. The clays that were used were provided by the Union Carbide Corporation and the Industrial Mineral Ventures (IMV), a division of Floridin company. The organic contaminants that this project concentrated on were, naphthalene, 1,4-dioxane, and phenol. The feasibility studies were done by batch isotherm studies. The protocol for the batch studies were the same as the ones used previously for granular activated carbon. This project looked at a total of six Union Carbide clays and five IMV Floridin clays. …

Timed Petri Net Simulation Of Flexible Manufacturing Systems, Yan Chen

Theses

Standard Petri nets have been used to model and analyze Flexible Manufacturing Systems. The timed Petri net, which can incorporate the time delay associated with manufacturing events, provides additional information about real time behavior of practical systems. The Timed Petri Net Simulation Tool, a highly interactive graphical tool, is applied to simulate the modeled flexible manufacturing systems. Timed Petri net models are experimented with. Machine utilization data and throughput are obtained. Analysis of the results shows that the system performance can be optimized by choosing proper parameters.

A Comparison Of Integration Architectures, Amar Mahidadia

Theses

This paper presents GenSIF, a Generic Systems Integration Framework. GenSIF features a pre-planned development process on a domain-wide basis and facilitates system integration and project coordination for very large, complex and distributed systems. Domain analysis, integration architecture design and infrastructure design are identified as the three main components of GenSIF. In the next step we map Beilcore's OSCA interoperability architecture, ANSA, IBM's SAA and Bull's DCM into GenSIF. Using the GenSIF concepts we compare each of these architectures.

GenSIF serves as a general framework to evaluate and position specific architecture. The OSCA architecture is used to discuss the impact of …

Optical Flow Determination And Motion Analysis, Qian Wang

Theses

Optical flow, also known as image flow, is of fundamental importance in the processing of image sequences. Various approaches to determine optical flow have been proposed --- others continue to appear. Using several sets of real image sequences, here, the results of three different approaches to the the determination of optical flow are reported, the approaches are the Gradient-based approach, the Correlation-based approach and the Correlation-feedback approach. The comparisons are primarily empirical, and they show that the performance of these different algorithms differs significantly among the different image sequences, indicating that there does not exists one superior algorithm which could …

A Study Of Pulsation Of Chest Wall Using Microwave Interferometer, Paul Zeno

Theses

The microwave interferometer is utilized to pick up vibrations of the anterior chest wall produced by the cardiac activity. The objective of this project is to find the causes of different peaks in the output of the microwave interferometer. The output of the microwave interferometer is recorded simultaneously with EKG and jugular pressure pulses. Eighteen subjects had their mechanical vibrations of the chest wall, EKG and jugular pressure pulses recorded. The processed interferometer data, when compared with EKG and jugular pressure pulses appear to have a close relation to the mechanical events in the cardiac cycle. Four peaks in the …

Computer Implementation Of Mason's Rule And Software Development Of Stochastic Petri Nets, Xiaoyong Zhao

Theses

A symbolic performance analysis approach for discrete event systems can be formulated based on the integration of Petri nets and Moment Generating Function concepts [1-3]. The key steps in the method include modeling a system with arbitrary stochastic Petri nets (ASPN), generation of state machine Petri nets with transfer functions, derivation of equivalent transfer functions, and symbolic derivation of transfer functions to obtain the performance measures. Since Mason's rule can be used to effectively derive the closed-form transfer function, its computer implementation plays a very important role in automating the above procedure. This thesis develops the computer implementation of Mason's …

Computer Aided Finite Element Stress Analysis Of A Three Dimension Mandibular Bone Model Using I-Deas Software, Yixiong Xu

Theses

A three dimensional model of half of the mandibular bone, with 487 tetrahedra elements and 1,047 nodes, is established and analyzed by means of I-DEAS software. The masseter muscle is assumed to be 15° deviation from y-axis, and the Umetani boundary conditions are allowed to be varied. A 337 lb force was applied along the midline of the mandible to simulate a trauma force caused by the auto accident. The maximum principal stress is 18,400 psi and the minimum principal stress is -1,340 psi. Depending on the experimental results of dispalcement and maximum principal stress, the conclusions are drawn: 1) …

Behavior Of R/C Columns Under Nonproportional Variations In Axial And Lateral Loads, Kaniz Fatema Ahsan

Theses

The study on the behavior of reinforced concrete columns subjected to the motion of earthquake suggests that the structure may experience nonproportional variations in axial and lateral forces. In order to assess the capacity of a reinforced concrete structure under nonproportional loadings, an analytical model is developed using the fiber modeling technique.

The method is based on detailed analytical description of the geometry and material properties used in evaluating the behavior of the critical regions rather than a simplified and predefined set of hysteresis rules. The present study has two principal components of investigation. First, the analyses are done at …

An Improved Human Gait Model Incorporating The Effects Of Muscle Activity And Joint Friction, Tae Ho Choi

Theses

In designing an artificial leg for an amputee, it is important to find those underlying principles which determine the normal human gait. For this purpose we have developed a model of human walking, in which it is possible to predict an optimal gait at any given speed of walking based on the principle of minimum mechanical energy consumption.

Our model is an extension of the model proposed by Mochon and McMahon (1980). Their model assumes that during the swing phase of walking mechanical energy is conserved. Non-conservative forces due to muscle activity are assumed to occur during the double support …