Digital Commons Network^™

Object Oriented Design Of Petri Net Simulator, Himanshu Juneja

Theses

Petri nets are highly useful for modeling discrete event dynamic systems. The objective of this effort is to develop a tool for drawing, editing and simulating Petri nets using object oriented programming on a standard platform. The object oriented approach was chosen because of its code reuse and extendability features which simplify the task of adding features to the tool as the model evolves. The design stresses on modeling of the problem by objects which closely relate the system design with the implementation.

C++ is used for implementing the object oriented design, and the XView toolkit is used for building …

Local Stress Factors Of Pipe-Nozzle Due To Radial Load, Circumferential And Longitudinal Moments, Junyu Lin

Theses

This thesis presents a series of stress factor data which provide more detailed information for the calculation of local stresses at the nozzle region, as well as the pipe region, of a pipe-nozzle intersection, subjected to an external radial load, circumferential bending moment, and longitudinal bending moment, respectively.

The pipe and nozzle thicknesses are assumed to be identical. Numerical solutions are obtained through the use of the finite element method. In obtaining the numerical solutions via ANSYS, the quadrilateral element is used to simulate the thin shell pipe-nozzle geometries. The local stresses, at eight different points on both the pipe …

Far Infrared Fourier Transform Spectroscopy Using Ring Interferometer, Changqing Qiu

Theses

A circular mirror interferometer named ring interferometer, which was designed by Dr. K.D. Moller, was built and set up for far-infrared Fourier transform spectroscopy. The ring interferometer has ten circular mirrors with the same area. By applying Fraunhofer diffraction theory, the calculation shows that the ring interferometer will have large diffraction angle range compared with lamellar grating interferometer which has rectangular mirrors with same width. Therefore the ring interferometer will be more efficient than lamellar grating in far-infrared spectroscopy. The experimental results show that this ring interferometer will work as expected.

In addition, a "home made" helium cooled detector was …

Design Of Mask For Striped Filters And Thin-Film Multi-Layer Emissivity Modeling For Multi-Wavelength Imaging Pyrometer, Jitesh Navinchandra Shah

Theses

Multi-Wavelength Imaging Pyrometry (M-WIP) measures thermal radiation of any target (color or gray) in multiple narrow-spectral-regions and can simultaneously determine target temperature and emissivity. One approach for measuring radiation at multiple wavelengths using a 320X244 element Pt-Si SBD infrared camera is to use narrow-band striped filters deposited on a transparent substrate with proper alignment. The major focus of this thesis was the design of a four layer mask for investigating the feasibility of defining three-wavelength striped filters compatible with focal plane array. This mask design allows twelve distinct narrow band striped filter geometries and four test-patterns on a 4-inch silicon …

Real Time Control Of A Dual Resonator System, Penghuai Shen

Theses

An experimental multi-resonator system has been developed to study modelling and robust control of such systems in a real-time environment. The plant to be controlled consists of a pair of interconnected resonators whose resonant frequency and plant structure are known. The control objectives are to provide closed loop stability and asymptotic regulation of the frequency, gain and phase of each of the resonators. Furthermore, it is desired to use a minimal controller configuration so as to reduce implementational complexity.

The theoretical results follow directly the paper " Decentralized Robust Control of Interconnected Resonators" written by my advisor Dr. Timothy N. …

Statistical, Random And Fractal Characterizations Of Surface Topography With Engineering Applications, Gongyao Zhou

Dissertations

Two methods, namely the conventional and fractal geometry methods, are developed for surface topography characterization. The conventional method utilizing statistical and random process techniques is used to study waterjet machined surfaces. In the study the waterjet surfaces are separated into smooth and striation zones, where striation influence is negligible in the smooth zone. It is found that the smooth zone has a random, moderately isotropic texture, with the height distribution nearly Gaussian. In the striation zone the major frequencies of the surface profile power spectra are independent of cutting parameters, while the amplitudes of these frequencies monotonically increase with cutting …

Constitutive Equation For Concrete Using Strain-Space Plasticity Model, Yuxiang Xing

Dissertations

Plasticity theory has been used to model the concrete constitutive relationship for about two decades. With the modifications and refinement based on experimental data, achievement has been made in these plasticity models for concrete. Almost all the existing models are developed in stress space. With a lot of experimental data and more understanding about stress states of concrete, the stress-space model shows many advantages. Because of this and also due to conventional engineering practice, the stress-space plasticity approach has been in the dominant position. However, the conventional stress-space plasticity method has one inherent drawback in which it cannot deal with …

On Orthogonal Collocation Solutions Of Partial Differential Equations, Herli Surjanhata

Dissertations

In contrast to the h-version most frequently used, a p-version of the Orthogonal Collocation Method as applied to differential equations in two-dimensional domains is examined. For superior accuracy and convergence, the collocation points are chosen to be the zeros of a Legendre polynomial plus the two endpoints. Hence the method is called the Legendre Collocation Method. The approximate solution in an element is written as a Lagrange interpolation polynomial. This form of the approximate solution makes it possible to fully automate the method on a personal computer using conventional memory.

The Legendre Collocation Method provides a formula for …

Minimum Redundancy Array Structure For Interference Cancellation, Wan-Ling Chen

Dissertations

Adaptive antenna arrays are widely used in many advanced radar, sonar, and communication systems because of their effectiveness in cancelling intentional or unintentional interferers. A uniformly spaced linear array, referred to as a Uniform Regular Array (URA), is the usual structure used for interference cancellation. The Minimum Redundancy Array (MRA) structure proposed in this work is a special kind of thinned array whose application was limited in the past to direction finding. MRAs with the same number of array elements can resolve directions of much more closely spaced signals than URAs.

The URA structure is customarily utilized for interference cancellation, …

Algorithms For Generation Of Path-Methods In Object-Oriented Databases, Ashish Mehta

Dissertations

A path-method is a mechanism in object-oriented databases (OODBs) to retrieve or to update information relevant to one class that is not stored with that class but with some other class. A path-method is a method which traverses from one class through a chain of connections between classes to access information at another class. However, it is a difficult task for a user to write path-methods, because it might require comprehensive knowledge of many classes of the conceptual schema, while a typical user has often incomplete or even inconsistent knowledge of the schema.

This dissertation proposes an approach to the …

Dmodel And Dalgebra : A Data Model And Algebra For Office Documents, Fortune Solani Mhlanga

Dissertations

This dissertation presents a data model (called D_model) and an algebra (called D_ algebra) for office documents. The data model adopts a very natural view of modeling office documents. Documents are grouped into classes; each class is characterized by a "frame template", which describes the properties (or attributes) for the class of documents. A frame template is instantiated by providing it with values to form a "frame instance" which becomes the synopsis of the document of the class associated with the frame template. Different frame instances can be grouped into a folder. Therefore, a folder is a set of frame …

Characterization Of Advanced Etching Reactors Using Novel Diagnostic Tools, Vipulkumar Patel

Dissertations

Plasma etching equipment used for sub-micron integrated circuit fabrication at present are exclusively based on 13.56 MHz, capacitively coupled, parallel-plate geometry. The underlying mechanisms of plasma processes in these reactors are not well understood and there is even less understanding of how the etch-tool parameters relate to the plasma discharge characteristics which actually determine the etch process. In this thesis, new diagnostic techniques were applied for the characterization and optimization of plasma etching processes in various reactor configurations.

Specifically, diode and triode configurations were studied extensively using tuned scanning Langmuir probes. Both radial and axial distributions of plasma density were …

Unreinforced Masonry Structures : Nonlinear Analysis And Evaluation Of Some Rehab Schemes, Sanjay Mehta

Dissertations

Unreinforced masonry (URM) structures have been a common type of construction in the past and are still used in regions of low seismicity. Retrofitting of these structures is necessary because of two reasons: Firstly, observed damage after earthquakes reveals that URM construction is one of the most hazardous constructions even in the region of low seismicity; secondly, reclassification of seismic zones would require retrofitting of existing structures to comply with new guidelines for earthquake design.

Retrofitting measures require that the response of original and new structural systems as well as their interaction be considered. It is therefore important to correctly …

Megsdf Mega-System Development Framework, Tamar Zemel

Dissertations

A framework for developing large, complex software systems, called Mega-Systems, is specified. The framework incorporates engineering, managerial, and technological aspects of development, concentrating on an engineering process. MegSDF proposes developing Mega-Systems as open distributed systems, pre-planned to be integrated with other systems, and designed for change.

At the management level, MegSDF divides the development of a Mega-System into multiple coordinated projects, distinguishing between a meta-management for the whole development effort, responsible for long-term, global objectives, and local managements for the smaller projects, responsible for local, temporary objectives.

At the engineering level, MegSDF defines a process model which specifies the tasks …

Nucleus 1993, Classic Innovations, New Jersey Institute Of Technology

Yearbooks

This is a digitized, downloadable version of the New Jersey Institute of Technology Nucleus.

Competition Between Two Microbial Populations In A Sequencing Fed-Batch Reactor And Its Implications For Waste Treatment Applications, Sitaram Dikshitulu

Dissertations

Pure and simple competition between two microbial populations in a sequencing fed-batch reactor (SFBR) was studied both at the theoretical and experimental level. Competition occurred for a single chemical pollutant which could serve as the sole carbon and energy source for both competitors. A mathematical model describing the process under inhibitory kinetics (as is usually the case with hazardous and toxic substances) was derived and theoretically analyzed. The model predicts that the dynamics of a SFBR, and the kinetics of biodegradation, result in a complex set of operating regimes in which neither species, only one species, or both species survive …

Coordinate Measuring Machines : A Modern Inspection Tool In Manufacturing, Matthias Richard Mantel

Theses

Coordinate Measuring Machines (CMM) are flexible and universal dimensional measuring devices with the capability for full integration into a CIM information network. Developed as highly precise measuring machines for specially designed measuring rooms, today's CMMs are more and more used in shop floor applications which is a hostile environment for a precise measuring tool. CMMs are offered in a variety of configurations and levels of automation. For the CMM buyer it is therefore essential to have an overview of the different types of CMMs and their subsystems before making a purchasing decision.

To obtain reliable measuring results that are used …

Techniques Of Petri Net Reduction, Sreeranga Kalavapalli

Theses

Petri Nets have the capability to analyze large and complex concurrent systems. However, there is one constraint. The number of reachability states of the concurrent systems outweighs the capability of Petri Nets. Previous Petri Net reduction techniques focussed on reducing a subnet to a single transition and hence not powerful enough to reduce a Petri Net. This paper presents six reduction rules and discusses their drawbacks. A new reduction technique called Knitting Technique to delete paths of a Petri Net while retaining all the properties of the original net is presented. Further Structural matrix which facilitates reduction is presented.

A Mathematical Model For The Prediction Of Depth Of Cut In The Course Of Awj Machining, Naijian Ma

Theses

The objective of this study is to develop a practical mathematical model for prediction of the depth of cut in the course of Abrasive Water Jet (AWJ) machining. Semi-empirical method which is an integration of theoretical derivation and statistical analysis is used for process description. A theoretical model was constructed based on kinetic energy conservation equation, physical relationship among operating parameters, abrasive size, material properties and cutting results. Then, correlation between the depth of cut and operational parameters was analyzed in order to improve the theoretical model. Finally, a regression equation representing 1000 samples was constructed.

Three statistical criteria were …

Graphical Deep Knowledge Representation In Vodak/Vml Object-Oriented Database, Jue Wang

Theses

Applying Object-oriented concepts to the design of complex graphical interface has received great attention in the database and knowledge representation disciplines. Traditional CAD systems can not support efficient environments for design processes because they store information about all the objects for display purposes but do not store any knowledge for reasoning purposes. They are called "knowledge poor". "Graphical Deep Knowledge" in Artificial Intelligence has been proven successful to represent knowledge about objects for display purposes as well as reasoning purposes. We introduwd the theory of "Graphical Deep Knowledge" into the object-oriented database s stem VML to design a "Knowledge rich" …

Modeling And Investigation Of Current Transport Phenomena In Schottky Structures, Yan Zeng

Theses

We have used a numerical method to describe the importance of the contribution of generation-recombination current to the I-V characteristics of Schottky barrier contacts. The current-voltage relationship is derived directly from the fundamental set of equations such as Poisson; current-density and continuity equations, without having to make many simplifications or approximations. The final result includes not only the thermionic emission or drift diffusion mechanisms of current flow, but also the generation recombination processes.

The experimental devices used for this work are very common low barrier height Schottky structures, Al/T_0.3W_0.7/n-Si/A1 and Ti_0.3W_0.7/n-Si/Al. The …

Classification Of Patterns In Eeg Recordings : A Comparison Of Back-Propagation Networks Vs. Predictive Autoencoder Networks, Brian Armieri

Theses

Recent research exploring the use of neural networks for electro-encephalogram (EEG) pattern classification has found that a three-layer back-propagation network could be successfully trained to identify high voltage spike-and-wave spindle (HVS) patterns caused by epileptic seizures (Jando et. al., in press). However, there is no reason to predict that back-propagation is the best possible network architecture for EEG classification. A back-propagation neural network and a predictive autoencoder neural network were compared to determine which network was better at correct classifying both HVS and non-HVS patterns.

Both networks were able to classify 88%-89% of all patterns using a limited set of …

Properties And Determination Of Optimal Decentralized Feedback Structure, Kangsong Han

Theses

In this thesis, the decentralized feedback structure for large scale, linear time invariant systems is studied. The internal differences and the relationship between decentralized feedback structure and centralized feedback structure are discussed. The conventional diagonal feedback structure. corresponding to the classical single loop design strategy, is first analyzed. This is followed by an arbitrary decentralized information flow constraint which is dependent upon the actual plant characteristics. Although signal flow graphs have limited use in describing decentralized control systems. the concept of a control cycle unit based on signal flow is introduced as a supplementary tool to characterize some fixed modes …

Improving The Jitter Performance Of Timing Recovery By Employing Delay Shifts, Xin De Lu

Theses

Many methods have been developed for evaluating the jitter performance of timing recovery circuits for binary synchronous transmission systems. These circuits consist of a nonlinear device followed by a narrowband filter tuned to the pulse repetition frequency. This thesis introduce delay shifts in the timing recovery circuits to improve the jitter performance. The function of the delay shifts is analyzed and mathematical proof of jitter performance improvement is given for the system using square-law device. Finally, the numerical results obtained from the specific examples serve to illustrate the significant improvement between the system with and without delay shifts. That is, …

Recursive Soft Morphological Filters, Padmaja Puttagunta

Theses

Mathematical morphology which is based on set-theoretic concept, extracts object features by choosing a suitable structuring shape as a probe. Morphological filters are set operations that transform an image into a quantitative description of its geometrical structure: Appropriately used, they can eliminate noises or irrelevancies while preserv¬ing the details of the original image. The applications of morphological filters in image processing and analysis are numerous, which include shape recognition, industrial parts inspection, nonlinear filtering, and biomedical image processing.

Soft morphological filters are used for smoothing signals with the advantage of being less sensitive to additive noises and to small variations …

The Postbus Fault Tolerant Clos Network, Udayabhanu Sarangapani

Theses

The trend in modern computing is to develop multiprocessor systems with hundreds, even thousands, of processors and memory modules. The task of providing communication paths among all these units is not a trivial one. For a small number of functional units, direct connections could be used but for large systems interconnection networks have to be used. Multistage Interconnection Networks (MINs), provide a dynamic means for interconnecting processors and memory in a multiprocessor system. These networks are built with switches in each stage.

The Clos network is a well defined family of MINs and consists of three stages. The ordinary Clos …

Computer Simulation Of Intracranial Hemodynamics During The Induction Phase Of Anesthesia, Gopinath P. Sundaram

Theses

The induction of general anesthesia is associated with severe hemodynamic compromises which, in turn, may cause acute elevation of intracranial pressure (ICP). Quantitative assessment of cerebrovascular responses arising from multiple mechanical and pharmacological interventions occurring in a short time interval require a large number of human studies which are difficult to perform. The purpose of this project is to evaluate the effect of various stimuli on the intracranial hemodynamics during induction using a mathematical model of cerebrovascular circulation.

A five compartmental model of the cerebrovascular system is used for our simulation. Autoregulation is modeled by adjusting arterial-arteriolar resistance in order …

Fracture Of Cementitious Composites, Sira Tindukasiri

Theses

Studies in fracture mechanics of concrete use a testing setup which tends to include unacceptably large errors in deflection measurements. Recent work reported by Kim [3] has proposed a new testing setup to eliminate these errors and consequently produce better determinations of fracture parameters.

The error which occurs most frequently is in the measurement of the load-line deflection. Until recently, the way this measurement has been made, using a dial gauge or LVDT (Linear Variable Differential Transformer) to measure the deformation between the center of the specimen and the frame, includes the crushing of the concrete surface at the supports …

A Multicompartmental Model For The Simulation Of Soluble Gas Exchange In The Lungs, Chitaranjan Varadhan

Theses

No abstract provided.

An Elementary Reaction Model For Thermal Decomposition Of Cf2cl2 In A H2 Atmosphere And Experimental Studies On Oxidation Of Ch3oh Plus Ch4 Under Fuel Rich, Stoichiometric And Fuel Lean Conditions, Cheng Guo

Theses

Pyrolysis of CF₂CL₂ in an atmosphere of H₂, has been studied in a tubular flow reactor, 723 to 873 K. Overall eaction conversion proceeds via loss of Cl with CHF₂CL formation, then loss of the second Cl atom and CH₂F₂ product. Initiation occurs by unimolecular Cl atom loss. Subsequent chain propagation steps rapidly generate active H atoms which abstract Cl atoms, but abstraction of fluo-rine atoms by atomic hydrogen is slow at the temperatures of this study.

A small mechanism, about 35 elementary reaction steps, and a thermodynamic data base …