Digital Commons Network^™

Hardened Concrete Properties And Durability Assessment Of High Volume Fly Ash Concrete, Kyle Marie Marlay

Masters Theses

"Concrete is produced more than any other material in the world. Sustainable construction is extremely important in today's industry and fly ash is the leading material for sustainable concrete design. The addition of fly ash improves many fresh and hardened concrete properties. However, the slow hydration process associated with fly ash makes the use of the material in large amounts undesirable in conventional construction. This study evaluated the hardened concrete and durability performance of several high-volume fly ash (HVFA) concrete mixes. The various HVFA concrete mixes evaluated within this study consisted of 70 percent replacement of portland cement by weight …

Density Determination Of Tristructural-Isotropic Nuclear Fuel Using Multiple Projection X-Ray Radiography, Frank Angelo Strantz

Masters Theses

"Effective methods of enhancing the safety and efficiency of the nuclear power industry embolden its perception and economic viability. Fuel reliability is an essential component of the prosperity of next generation high temperature reactors; as such, an equally dependable quality control method is mandatory. Tristructural-isotropic (TRISO) fuel, the fuel developed for use in these reactors, utilizes density measurement of coating layers as a standard for quality control. Common methods of measuring density, such as sink-float and ceramography are destructive, and as such generate radioactive waste, take a relatively long time to prepare samples, rely on a low sampling rate to …

A Rapid-Acquisition Electrical Time-Domain Reflectometer For Analysis Of Time-Variant Impedance Discontinuities, Joseph Andrew Bishop

Masters Theses

"A distributed crack sensor has been developed for the measurement of cracks in concrete structures. The sensor is measured using a distributed measurement technique known as electrical time-domain reflectometry (ETDR). ETDR has traditionally been used to measure time-invariant (i.e. unchanging with time) impedance discontinuities, however applications of the sensor in structural failure analysis require measurement of time-variant (i.e. changing with time) impedance discontinuities at rates as high as 10 k measurements per second. ETDR is a suitable measurement technique for these applications since a time-domain reflectometer (TDR) acquisition can be performed in less than 100 µs. Employment of ETDR in …

The Sorption Of Chemical And Nuclear Contaminants From Soil And Water Using Nanosize Particles Of Hydroxyapatite, Chyrene Joseph

Masters Theses

"High surface area (>200 m²/g) crystals composed of nanosize (30-50nm) hydroxyapatite; (Ca₅(PO₄)₃OH) particles are being investigated as an alternative in cleaing [sic] contaminated groundwater and soil by removing toxic wastes and radionuclides. Static batch tests were carried out at 2, 4, 8, 24 and 120 hour time periods by reacting hydroxyapatite with individual solutions prepared with specific elements to evaluate the applicability of hydroxyapatite in removing potential contaminants. Chemical analyses on leachant solutions, leachate solutions, and post-reaction digested solids were conducted by Inductively Coupled Plasma-Mass Spectroscopy to determine the extent of ion removal. Removal of these ions is expected …

Continuous Low Thrust For Small Spacecraft Proximity Operations, James Harris Meub

Masters Theses

"Recently, both DoD and NASA have demonstrated increased interest in the development of close proximity operations for space systems. AFRL's Advanced Sciences and Technology Research Institute for Astrodynamics (ASTRIA) has defined several key research topics relevant to military priorities, with one area of critical importance being the inspection and observation of low Earth orbit resident space objects (RSOs). This study investigates the feasibility of using a low-thrust cold-gas propulsion system to effectively and accurately facilitate resident space object inspection. Specifically, this study focuses on the Missouri S&T Satellite mission (M-SAT) as a means to demonstrate autonomous RSO inspection. This paper …

Processing And Mechanical Characterization Of Polyurea Aerogels, Jared M. Loebs

Masters Theses

"The use of aerogels historically has been limited to extreme cases largely in part to the nature of their mechanical properties. Until recently many aerogels produced have been brittle and weak, though looking at their specific strength would suggest otherwise. This thesis outlines the processing and major mechanical properties of a relatively new type of aerogel, polyurea aerogel, that shows promise in a variety of fields including structures.

Processing polyurea aerogel begins with a liquid solution that solidifies to form a solid gel filled with liquid that is later removed by supercritical drying. Once dry, polyurea aerogels are difficult to …

The Effects Select Physical Parameters Have On An Explosively Formed Projectile's Performance, Phillip R. Mulligan

Masters Theses

"Identifying how changes in the physical parameters of an Explosively Formed Projectile (EFP) affect its performance is crucial in determining what physical parameters could be changed to achieve a desired performance. This research analyzes five of the physical parameters of an EFP, similar to an Iranian design (Worsey, 2009), and the effects on performance. The five physical parameters selected for this research were charge weight, confining geometry, flyer thickness, flyer curvature, and explosives-type. Eighteen different EFP designs were used to test the penetration, measured velocity, production of a dominant projectile, and kinetic energy of these five physical parameters. Of the …

Waterjet Injection Of Powdered Activated Carbon For Sediment Remediation, Chris J. Redell

Masters Theses

"In situ sediment remediation through waterjet-activated carbon amendment delivery is an innovative means to mitigate the dangers posed by hydrophobic organic compounds. Ease of use and applicability to inundated environments makes this technique valuable. This work made feasible low-pressure injections of a 15% (by dry weight) carbon/water slurry through a pulsating piston pump waterjet. The project fabricated nozzle tips and a unique injection apparatus comprising a quantitative system for the evaluation of bench scale models. Based on a series of iterative processes, injections of carbon were analyzed for depth and concentration. Injections varied in duration and they were made into …

Design Of A Hydrogen Community For Santa Monica, Vijay Mohan

Masters Theses

"Hydrogen systems infrastructure development and fuel cell vehicles (FCVs) have the potential to replace the gasoline internal combustion engine vehicles thus increasing energy security and reducing greenhouse gas emissions. Hydrogen fueling infrastructure development is critical for the commercialization and consumer acceptability of the FCVs, thus recognizing hydrogen as an affordable transportation fuel. This paper presents the conceptual design of a scalable and reproducible hydrogen fueling station in Santa Monica, California. The various hydrogen production technologies have been evaluated and the usage of renewable energy sources such as biogas and landfill gas has been emphasized. The technical specifications of the hydrogen …

Driven Pile Load Test Data For Load And Resistance Factor Design In Missouri, Joseph Ronson Cravens

Masters Theses

"The Missouri Department of Transportation (MoDOT) has recently migrated from allowable stress design (ASD) to load and resistance factor design (LRFD) of driven piles. This transition was initiated when the Federal Highway Administration (FHWA) issued a policy stating that all new bridge designs shall be designed in accordance with the American Association of State Highway and Transportation Officials (AASHTO) LRFD Bridge Design Specifications to eliminate the difference in design methodologies for bridge superstructures and bridge substructures. However, the resistance factors for driven piles specified in the AASHTO LRFD specifications are based on nationwide pile data, consisting of a wide range …

Shaker Table Vibration Testing Of A Microsatellite, Tonya Michelle Sanders

Masters Theses

"In the satellite development process, structural testing is a means to gain confidence in analytical models and ultimately support qualification of the spacecraft for flight. Vibration testing, in particular, is motivated by the safety considerations of crew or launch personnel, the survivability of delicate hardware and electronics, and the avoidance of large stresses that cause structural fatigue or failure. The subject of this thesis is concerned with the shaker table vibration testing of a microsatellite pair designed and built by students at the Missouri University of Science and Technology in Rolla, Missouri. A finite element model (FEM) used in structural …

Design And Analysis Of A Speed-Aware Routing Protocol For Mobile Ad Hoc Networks, Kirthana Akunuri

Masters Theses

"The flexibility of movement for the wireless ad hoc devices, referred to as node mobility, introduces challenges such as dynamic topological changes, increased frequency of route disconnections and high packet loss rate in Mobile Ad hoc Wireless Network (MANET) routing. This research proposes a novel on-demand routing protocol, Speed-Aware Routing Protocol (SARP) to mitigate the effects of high node mobility by reducing the frequency of route disconnections in a MANET. SARP identifies a highly mobile node which forms an unstable link by predicting the link expiration time (LET) for a transmitter and receiver pair. When the nodes have high relative …

Evaluation Of The Orientation Of 90⁰ And 180⁰ Reinforcing Bar Hooks, Nichole Lynn Podhorsky

Masters Theses

"This thesis describes test results of a study initiated to evaluate the potential influence of hook tilt angle of standard reinforcing hooks on the bond strength of concrete. The topic of the evaluation of the orientation of 90 and 180 degree reinforcing bar hooks in concrete members was identified by the Concrete Reinforcing Steel Institute (CRSI) as high-priority for the reinforcing steel industry. In this test program, a series of single bar and multiple bar specimens were designed and tested to examine bar behavior and potential group effects that may exist in wide flexural members with multiple bars, such as …

A Framework For Transparent Depression Classification In College Settings Via Mining Internet Usage Patterns, Raghavendra Kotikalapudi

Masters Theses

Depression is a serious mental health problem affecting the mind and body of people in our society. As of today, depression affects about 5 to 7% of the American population, which roughly translates to 14 million people! A particularly worrying concern these days is the increasing incidence of depression among college students. The problem is so severe that many US campuses have dedicated centers with mental health professionals catering to students needs. Although there are very effective treatments for depression, studies report that ~80% of depressed students do not seek any help due to the lack of perception of the …

Model Based Diagnostics And Prognostics Of Practical Industrial Systems, Raja Sekhar Kraleti

Masters Theses

"In this thesis, the diagnosis and prognosis of single and simultaneous multiple incipient faults in practical industrial systems is demonstrated in two papers. For the purpose of fault detection and failure prediction, a model based strategy is adopted, which involves using an online adaptive estimator. The online estimator estimates the system dynamics. Residual is generated based on the physical system model and the estimated system dynamics. This residual is used to detect the fault. Once the fault is detected, a tunable nonlinear neural network online approximator in discrete-time (OLAD) along with a robust adaptive term is initiated. The OLAD utilizes …

Trait Approach To Leadership In Campus Organizations: The Hogan Personality Inventory As A Predictor, Christyn Nicolle Collum

Masters Theses

"The trait approach to leadership has been researched extensively and applied to several fields. This study examined whether or not student leadership in registered student organizations is related to personality traits on the Missouri University of Science and Technology campus from spring semesters 2008, 2009, and 2010. It also explored whether or not traits are related to students joining organizations, during these same semesters. The students' personalities were evaluated using the Hogan Personality Inventory (HPJ), which entering freshmen voluntarily completed. The seven scales of the HPJ are Adjustment, Ambition, Sociability, Interpersonal Sensitivity, Prudence, Inquisitiveness, and Learning Approach. Personality results were …

Microcontroller-Based Multiple-Input Multiple-Output Transmitter Systems, Balaji Madapuci Kanday

Masters Theses

"Multiple-Input Multiple_output (MIMO) Systems use multiple antennas at both the transmitter and receiver to increase data throughput and/or system reliability. An MIMO transmitter can be implemented using a variety of approaches. This work describes some of the approaches that can be used to generate the transmitted waveforms, and discuss the features and limitation of each. In particular, it shows haw a microcontroller-based system can be used for applications which require low power consumption. This thesis also describes the high-level design of a microcontroller-based MIMO transmitter. The computational speed of the microcontroller, as compared to Field-programmable Gate Array (FPGA) and Digital …

Risk-Sensitive Preventive Maintenance Policies Using Semivariance, Venkata Manojramam Tirumalasetty

Masters Theses

"Preventive maintenance is an important tool that increases the reliability of the production system by reducing downtime due to failures. In the literature, maintenance and replacement policies for productions systems have been widely studied and modeled. Traditionally preventive maintenance has focused only on minimizing expected costs without considering variability in costs. Cost variability is also commonly known as risk. In a 2003 paper, Chen and Jin used variance of costs as a measure of risk for formulating preventive maintenance policies. The variance criterion that they used ignored the probability of costs exceeding monthly or yearly budgets provided to managers. The …

Additivity Of Strengthening Mechanisms In Ultrafine Grained Aluminum Alloy, Nilesh Kumar

Doctoral Dissertations

"Friction stir processing (FSP) has been used in the present work to obtain ultrafine grained (UFG) microstructure in a twin-roll cast (TRC) Al-Mg-Sc alloy. An attempt has been made to establish a correlation between processing, microstructure, and properties (mechanical) in UFG regime for this alloy system.

The effect of initial microstructural conditions and processing parameters (tool rotation rate) were shown to have a profound impact on the development of UFG microstructure. FSP led to a microstructure consisting of grains with an average grain size as small as 390 nm, having high angle grain boundaries and a completely random texture. The …

Development Of Hybrid Composite Bipolar Plates For Proton Exchange Membrane Fuel Cells, Nathaniel James Richie

Masters Theses

"Bipolar plates are one of the most expensive components of a PEM fuel cell and by far the heaviest. Bipolar plates are responsible for providing flow fields for reaction gases, acting as current collectors for electrons liberated during the chemical reaction inside the cell, and providing structural support for the fuel cell stack. Current PEM fuel cell bipolar plate technology is built on the use of sintered graphite which is costly and requires time-consuming machining. Furthermore, due to the brittle nature of graphite, plates must be made relatively thick which adds significant weight and volume to larger stacks, such as …

Effect Of Initial Conditions On Molecular Mixing In A High Schmidt-Number Rayleigh-Taylor Mixing Layer, Lakshmi Ayyappa Raghu Mutnuri

Masters Theses

"Characterizing molecular mixing in Rayleigh-Taylor instability (RTI) driven flows where the density and velocity fields are coupled is essential for developing exacting predictive models. Sensitivity of the Rayleigh Taylor mixing layer to initial conditions is a topic that is being explored extensively in interests of accurate turbulent mix model development and its direct consequence in various applications like design of inertial confinement fuel capsule and atmospheric modeling. As part of the current work, an experimental investigation of the effect of initial conditions on molecular mixing in a low Atwood number(~7.5 x 10⁻⁴), high Schmidt number(~1000), RTI driven mixing layer is …

Optimal Control Of A Helicopter Unmanned Aerial Vehicle (Uav), David John Nodland

Masters Theses

"This thesis addresses optimal control of a helicopter unmanned aerial vehicle (UAV). Helicopter UAVs may be widely used for both military and civilian operations. Because these helicopters are underactuated nonlinear mechanical systems, high-performance controller design for them presents a challenge. This thesis presents an optimal controller design via both state and output feedback for trajectory tracking of a helicopter UAV using a neural network (NN). The state and output-feedback control system utilizes the backstepping methodology, employing kinematic and dynamic controllers while the output feedback approach uses an observer in addition to these controllers. The online approximator-based dynamic controller learns the …

Hall-Effect Thruster Surface Properties Investigation, David George Zidar

Masters Theses

"Surface properties of Hall-effect thruster channel walls play an important role in the performance and lifetime of the device. Physical models of near-wall effects are beginning to be incorporated into thruster simulations, and these models must account for evolution of channel surface properties due to thruster operation. Results from this study show differences in boron nitride channel surface properties from beginning-of-life and after 100's of hours of operation. Two worn thruster channels of different boron nitride grades are compared with their corresponding pristine and shadow-shielded samples. Pristine HP grade boron nitride surface roughness is 9000±700 Å, while the worn sample …

Social Network Analysis Of The Video Bloggers' Community In Youtube, Anusha Mogallapu

Masters Theses

"This research studied the structure of the social network of the video blogger community on YouTube. It analyzed the social network structure of friends and subscribers of the 187 video bloggers on YouTube and calculated the social network measures. This thesis compares the results to the structure described by Warmbrodt et al. in 2007 and explains the reasons for the distinctions. The number of video bloggers has increased enormously, and the form of their interactions has changed. As a result, the video blogger social network has evolved from a core/periphery structure to one that is centralized. This indicates that the …

An Incentive Based Approach To Detect Selfish Nodes In Mobile P2p Network, Hemanth Meka

Masters Theses

"The growth of mobile devices led to the wide use of Mobile P2P networks. These networks are used in a wide variety of areas and hence there is lot of research in the field of mobile networks. Detecting selfish nodes is one of the research topics triggered due to the popularity of mobile P2P networks. It is necessary to detect selfish nodes in such networks to improve the efficiency of the network. In this thesis, an incentive based approach to detect selfish nodes is designed and evaluated. This approach differs from the existing work as it (i) can be used …

A Time Series Approach To Electric Load Modelling, Matthias Benjamin Noller

Masters Theses

"With resources becoming more and more scarse [sic] as well as increasing competition caused by the liberalisation of the energy markets electric load modelling becomes ever more important for proper resource allocation.

This work tries to bridge the gap between long-term modelling done mainly via econometric approaches and short-term modelling in which time series models are more commonplace by focussing [sic] on pure time series modelling [sic] and exploring its limits in the process. Due to various seasonalities present in the data the approach chosen starts with a subdivision of the time axis in different time frames: A model for …

Development Of Virtual Cnc Machine Tools And Web-Based Machining Process Simulation: Mechanistic Cutting Force Models And Determination Of Specific Force Coefficients In Helical End Milling, Vinay Rao Talekar

Masters Theses

"This thesis presents the results of the investigations of mechanistic modeling and simulation of cutting forces in high speed end milling of titanium alloy, Ti-6Al-4V, and the determination of specific cutting and edge force coefficients for carbide bull-nose helical end-mill. A generalized mathematical model representing the outer geometry of an end-mill and the cutter edge geometry is presented. Mechanistic cutting force models have been developed for a general helical end-mill and modeled specifically for a bullnose helical end-mill. A MATLAB code for the mechanistic cutting force models have been developed for the simulation of cutting force components in end milling …

Electron Transport Through Two Irreducibly-Coupled Aharonov-Bohm Rings With Applications To Nanostructure Quantum Computing Circuits, Casey Andrew Cain

Masters Theses

"A thorough investigation was conducted into the six fundamental classes of two coupled Aharonov-Bohm rings that share a finite center common path, when the phase of the electron wave function was modulated by two distinct magnetic fluxes. The coupling is similar to two coupled atoms. The behavior of charge accumulation along the center common path or equivalently the bonding and anti-bonding of the two rings can be achieved as the two applied fluxes are varied. Thus when three external terminals are connected to such coupled rings, the behavior of the electron transport is divided into several classes depending on the …

Crack Formation In Investment Casting Ceramic Shells, W. A. Everhart

Masters Theses

"This thesis is a collection of papers that discuss shell cracking in investment casting during pattern removal. The application of rigid polymeric foam for large investment casting patterns with complex geometries can improve the dimensional tolerances and the surface quality of the casting. However, these pattern materials have a tendency to promote crack formation in investment casting shells during pattern removal by firing.

The first two papers discuss the factors affecting shell cracking and methods to prevent it. Experimental methods were combined with finite element modeling to predict stress in the shell. A 3D nonlinear finite element model was developed …

"Long" Carbon Fiber Reinforced Concrete For Impact And Blast Resistance, Benjamin Paul Gliha

Masters Theses

"One of the most commonly used materials for protective structures and construction is traditional reinforced concrete. However, in a blast, conventional reinforced concrete (RC) is susceptible to significant spalling (small to medium size chunks of concrete detaching from the original member). The force of the blast turns spalled concrete into projectiles, resulting in secondary fragmentation and the majority of loss of life. Furthermore, the concrete debris makes for difficult and uncertain footing. Both phenomena endanger personnel and complicate post-blast recovery efforts. A very promising but barely explored change to conventional RC construction is the addition of "long" carbon fibers (fibers …