Open Access. Powered by Scholars. Published by Universities.®

Digital Commons Network™

Open Access. Powered by Scholars. Published by Universities.®

Missouri University of Science and Technology

Discipline
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 1171 - 1200 of 33676

Full-Text Articles in Entire DC Network

Quantifying Deviation Of Elasticity In The Quasi-Elastic Domain Of Granular Soils, Wen Deng, Yufan Jin, Pingxin Xia, Qingqing Fu, Xiong Xia, Xiaoxia Guo Jan 2025

Quantifying Deviation Of Elasticity In The Quasi-Elastic Domain Of Granular Soils, Wen Deng, Yufan Jin, Pingxin Xia, Qingqing Fu, Xiong Xia, Xiaoxia Guo

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The absence of purely elastic properties in granular soil is attributed to the reversible sliding that occurs between particles during the loading–unloading cycle, leading to the dissipation of energy through friction. Instead of the strictly elastic domain, we opt for a quasi-elastic domain to examine elastic behavior within the confines of elastic theory. Within this quasi-elastic realm, the response deviates to some extent from the idealized pure elastic behavior posited by the elastic theory. As a result, the elastic constitutive relations applied to granular materials are no longer strictly accurate and may exhibit deviations. With the aim of exploring the …

Go to article

Extending The Applicability Of Thermal Protection System Ballistic Limit Equations Beyond The Testable Regime, William P. Schonberg, Michael D. Squire Jan 2025

Extending The Applicability Of Thermal Protection System Ballistic Limit Equations Beyond The Testable Regime, William P. Schonberg, Michael D. Squire

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Spacecraft use thermal insulation in their design, which is usually placed on their exterior. As such, it is susceptible to high-speed impacts by meteoroids and orbital debris, which can damage it to a point where the protection it offers is below acceptable limits. It is important to be able to characterize expected levels of damage stemming from such high-speed impacts. In this paper, we extend the applicability of a previously developed ballistic limit equation (BLE) for one such thermal insulation material using the results of a series of Smooth Particle Hydrodynamics Code (SPHC) impact simulations at velocities in excess of …

Go to article

Formation Of Hydrocarbons And Carbon Oxides In Mxene Reactions With Water Under Varying Oxidative Conditions, Shuohan Huang, Guanglei Xiang, Vadym Mochalin Jan 2025

Formation Of Hydrocarbons And Carbon Oxides In Mxene Reactions With Water Under Varying Oxidative Conditions, Shuohan Huang, Guanglei Xiang, Vadym Mochalin

Chemistry Faculty Research & Creative Works

Titanium carbide / carbonitride MXenes have garnered significant attention due to their remarkable properties, versatile solution processability, and broad range of potential applications. However, when exposed to the environment, MXenes are susceptible to degradation, which ultimately leads to the formation of metal oxides, a process that may be regarded as either disadvantageous or beneficial, depending on the application of a MXene and our knowledge about the underlying mechanisms. Therefore, it is very important to understand the reactivity of MXenes in different environments and conditions. Although researchers have made efforts to understand MXene degradation in air and water, our knowledge of …

Go to article

Identification Of A Serine Protease Involved In Spinosad Degradation In The Yellow Fever Mosquito, Aedes Aegypti, Hongxiao Yu, Caixia Peng, Zhaohui Chen, Jie Li, Yunqi Li, Xiaojing Zhu, Yuqi Huang, Linlong Jiang, Pablo Sobrado, Jianqiang Lan, Yingying Guo, Qian Han Jan 2025

Identification Of A Serine Protease Involved In Spinosad Degradation In The Yellow Fever Mosquito, Aedes Aegypti, Hongxiao Yu, Caixia Peng, Zhaohui Chen, Jie Li, Yunqi Li, Xiaojing Zhu, Yuqi Huang, Linlong Jiang, Pablo Sobrado, Jianqiang Lan, Yingying Guo, Qian Han

Chemistry Faculty Research & Creative Works

Spinosad is a widely used insecticide effective in controlling Aedes aegypti populations, but the molecular mechanisms underlying resistance remain poorly understood. This study explores the role of a serine protease, AeaSP (AAEL002624), in the potential detoxification ability of spinosad. Our results showed the crude protein of Ae. aegypti degraded approximately 48% of spinosad in vitro within 1 h; based on our previous research, AeaSP was believed to be potentially involved in the degradation of spinosad. Subsequently, AeaSP was recombinantly expressed in vitro, and its enzymatic activity was tested using BAEE as a substrate, with a Michaelis constant (KM) of 0.88 …

Go to article

Empirical Study Of Far-Field Radio Frequency Wireless Power Transfer Testbed For Underground Mines Based On 1.8 Ghz, Anabi Hilary Kelechi, Samuel Frimpong Jan 2025

Empirical Study Of Far-Field Radio Frequency Wireless Power Transfer Testbed For Underground Mines Based On 1.8 Ghz, Anabi Hilary Kelechi, Samuel Frimpong

Mining Engineering Faculty Research & Creative Works

A novel 1.8 GHz far-field wireless power transfer (WPT) testbed was designed to achieve long-distance energy harvesting in underground mine (UM). Prior experimental studies confirm that underground mines experience 50 dB radio frequency (RF) signal attenuation compared to a typical wireless environment. Due to this severe signal attenuation, the currently proposed radio frequency energy harvesting (RF-EH) testbed cannot be deployed in underground mines. In this study, we proposed, designed and performed an empirical study with a military-grade class A radio frequency wireless power transfer (RF-WPT) testbed. The various digital modulation schemes experimented with included: BPSK, DBPSK, QPSK, OQPSK, Pi4DQPSK, 8PSK, …

Go to article

Anisotropic And Temperature-Tunable Second-Harmonic Vortex Generation In Ferroelectric Nbocl2 Holograms, Jayanta Deka, Xiaodong Yang, Jie Gao Jan 2025

Anisotropic And Temperature-Tunable Second-Harmonic Vortex Generation In Ferroelectric Nbocl2 Holograms, Jayanta Deka, Xiaodong Yang, Jie Gao

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Optical vortex beams with helical phase fronts have immense potential to enhance data capacity due to the unbounded values of orbital angular momentum. Chip-scale platforms for producing vortex beams are of paramount importance for a variety of applications. On the other hand, 2D materials with unique optical properties are essential for developing multifunctional ultrathin photonic devices. Here, anisotropic and temperature-tunable second-harmonic vortex beam generation is demonstrated with ultrathin ferroelectric niobium oxide dichloride (NbOCl2) fork holograms. The polarization-resolved Raman measurements are performed on the NbOCl2 crystal to understand the anisotropic behavior of the Raman modes. It is demonstrated …

Go to article

Machine Learning Approach For Defect Prediction In Metal 3d Printing For Aerospace Applications, Yerlik Gabdulla, Md Hazrat Ali, Frank Liou, Essam Shehab Jan 2025

Machine Learning Approach For Defect Prediction In Metal 3d Printing For Aerospace Applications, Yerlik Gabdulla, Md Hazrat Ali, Frank Liou, Essam Shehab

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Additive manufacturing (AM) has revolutionized the aerospace industry by enabling the production of lightweight and high-strength components, such as aerospace engine components and structural elements. The ability to create complex geometries and reduce material waste is particularly beneficial for aerospace applications, where performance and weight reduction are paramount. However, ensuring the quality and reliability of these components remains a challenge, particularly in mass production, which is related to material quality, expensive processes, and longer computational times than conventional manufacturing methods. This paper proposes an approach utilizing a Decision Tree Classification Machine Learning Algorithm to predict the possibility of defect occurrence …

Go to article

In-Situ Transmission Electron Microscopy Investigation Of Grain Size And Temperature Dependent Irradiation Behavior Of 304l Stainless Steel, Anish Ranjan, Matthew Luebbe, Nastaran Motaharinia, Wei Ying Chen, Frank Liou, Haiming Wen Jan 2025

In-Situ Transmission Electron Microscopy Investigation Of Grain Size And Temperature Dependent Irradiation Behavior Of 304l Stainless Steel, Anish Ranjan, Matthew Luebbe, Nastaran Motaharinia, Wei Ying Chen, Frank Liou, Haiming Wen

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The influence of grain size, irradiation temperature, and dose on the evolution of irradiation-induced defects in austenitic 304L stainless steel (SS) was systematically investigated. Coarse-grained (CG), ultrafine-grained (UFG), and nanocrystalline (NC) specimens were exposed to irradiation doses up to 10 displacements per atom (dpa) at room temperature (RT), 300°C, and 500°C. Dislocation loop size and density were quantitatively analyzed using transmission electron microscopy, and results showed that the dislocation loop size remained comparable across different grain sizes. However, loop density was strongly dependent on the grain size. The CG specimens exhibited the highest loop density due to a limited fraction …

Go to article

Electrochemical Observation And Ph Dependence Of All Three Expected Redox Couples In An Extremophilic Bifurcating Electron Transfer Flavoprotein With Fused Subunits, Debarati Das, Wassim El Housseini, Monica Brachi, Shelley D. Minteer, Anne Frances Miller Jan 2025

Electrochemical Observation And Ph Dependence Of All Three Expected Redox Couples In An Extremophilic Bifurcating Electron Transfer Flavoprotein With Fused Subunits, Debarati Das, Wassim El Housseini, Monica Brachi, Shelley D. Minteer, Anne Frances Miller

Chemistry Faculty Research & Creative Works

Bifurcating enzymes employ energy from a favorable electron transfer to drive unfavorable transfer of a second electron, thereby generating a more reactive product. They are therefore highly desirable in catalytic systems, for example, to drive challenging reactions such as nitrogen fixation. While most bifurcating enzymes contain air-sensitive metal centers, bifurcating electron transfer flavoproteins (bETFs) employ flavins. However, they have not been successfully deployed on electrodes. Herein, we demonstrate immobilization and expected thermodynamic reactivity of a bETF from a hyperthermophilic archaeon, Sulfolobus acidocaldarius (SaETF). SaETF differs from previously biochemically characterized bETFs in being a single protein, representing a concatenation of the …

Go to article

Effect Of Gluconate Molecules On The Reaction Kinetics Of C-(N)-A-S-H And N-A-S-H Gel Formation, Jiafeng Kong, Chao Sun, Zuhua Zhang, Chenglong Cai, Yubin Cao, Yanru Wang, Hongyan Ma, Xuesen Zeng, Hao Wang Jan 2025

Effect Of Gluconate Molecules On The Reaction Kinetics Of C-(N)-A-S-H And N-A-S-H Gel Formation, Jiafeng Kong, Chao Sun, Zuhua Zhang, Chenglong Cai, Yubin Cao, Yanru Wang, Hongyan Ma, Xuesen Zeng, Hao Wang

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Organic ligands are widely used to regulate setting in cementitious binders, yet their chemistry-selective action in geopolymers (GPs) remains unclear. Here we isolate the role of sodium gluconate (SG) in early reaction kinetics across a Ca-rich GP that forms a calcium-(sodium)-aluminosilicate hydrate (C-(N)-A-S-H) gel and a Ca-poor GP that forms a sodium-aluminosilicate hydrate (N-A-S-H) gel. Four GPs spanning Ca/Si ≈ 1.01 to 0.01 were prepared with identical activator chemistry and dosages of SG up to 5 wt.% of precursors. Setting time, isothermal calorimetry, pore-solution speciation (TOC, ICP-OES, and pH), selective dissolution (reaction extent), low-field1H NMR, XRD, FTIR, SEM-EDS, …

Go to article

Every Publication Needs An Author Verified Tl;Dr Statement, Sarah Oerther, Daniel B. Oerther Jan 2025

Every Publication Needs An Author Verified Tl;Dr Statement, Sarah Oerther, Daniel B. Oerther

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

No abstract provided.

Go to article

Impact Of Surface And Physical Property On Multiphase Flow In Sealed Vessel: Liquid Dropdown Performance, Mehedi Hasan Tusar, Palash K. Bhowmik, Kazuma Kobayashi, Syed Bahauddin Alam, Shoaib Usman Jan 2025

Impact Of Surface And Physical Property On Multiphase Flow In Sealed Vessel: Liquid Dropdown Performance, Mehedi Hasan Tusar, Palash K. Bhowmik, Kazuma Kobayashi, Syed Bahauddin Alam, Shoaib Usman

Nuclear Engineering and Radiation Science Faculty Research & Creative Works

This study explores multi-phase (i.e., liquid-gas) and multi-fluid (i.e., air-water, and water-silicone oil) flow-pattern and flow-blockage physics phenomena for wall wettability conditions ranging from superhydrophilic to superhydrophobic cases in sealed vessels utilizing computational fluid dynamics (CFD) simulation tools and volume-of-fluid (VOF) method with sharp interface modeling. Detailed modeling and simulation (M&S) of such physics phenomena—in which liquid (e.g., water) stands over top of gas (e.g., air or steam) in a closed channel and exhibited flow blockage, flow reversal related challenges—are pivotal for design, analysis, and qualification of component-level (e.g., heat pipes, heat exchangers) to system-level (e.g., emergency core cooling systems …

Go to article

Momentum Imaging Of Electrons And Recoil Ions From Anion-Neutral Interactions In A Cryogenic Ion Storage Ring, F. Herrmann, W. Zhang, M. Schulz, D. V. Chicharro, A. Dorn, M. Grieser, F. Grussie, H. Kreckel, O. Novotny, F. Trost, A. Wolf, T. Pfeifer, C. D. Schröter Jan 2025

Momentum Imaging Of Electrons And Recoil Ions From Anion-Neutral Interactions In A Cryogenic Ion Storage Ring, F. Herrmann, W. Zhang, M. Schulz, D. V. Chicharro, A. Dorn, M. Grieser, F. Grussie, H. Kreckel, O. Novotny, F. Trost, A. Wolf, T. Pfeifer, C. D. Schröter

Physics Faculty Research & Creative Works

We have momentum-analyzed electrons and recoil ions in triple coincidence with projectiles neutralized in 300-keV Si-+Ar collisions. The experiment was performed at a cryogenic ion storage ring with an in-ring reaction microscope. Differential momentum distributions for detachment with simultaneous target ionization were obtained. At more than 15% of the detachment-only rate the ionization rate is surprisingly large. A correlated two-electron channel is found to be dominant. This is also unexpected because the projectile energy is well below the threshold for the correlated process.

Go to article

Anisotropic Third-Harmonic Vortex Beam Generation With Ultrathin Germanium Arsenide Fork Gratings, Jayanta Deka, Jie Gao, Xiaodong Yang Jan 2025

Anisotropic Third-Harmonic Vortex Beam Generation With Ultrathin Germanium Arsenide Fork Gratings, Jayanta Deka, Jie Gao, Xiaodong Yang

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Optical vortices have the tremendous potential to increase data capacity by leveraging the extra degree of freedom of orbital angular momentum. On the other hand, anisotropic 2D materials are promising building blocks for future integrated polarization-sensitive photonic and optoelectronic devices. Here, highly anisotropic third-harmonic optical vortex beam generation is demonstrated with fork holograms patterned on ultrathin 2D germanium arsenide flakes. It is shown that the anisotropic nonlinear vortex beam generation can be achieved independent of the fork grating orientation with respect to the crystallographic orientation. Furthermore, 2D fork hologram is designed to generate multiple optical vortices having different topological charges …

Go to article

Thermo-Rheological And Tribological Properties Of Low- And High-Oleic Vegetable Oils As Sustainable Bio-Based Lubricants, Abiodun Saka, Tobechukwu K. Abor, Anthony C. Okafor, Monday U. Okoronkwo Jan 2025

Thermo-Rheological And Tribological Properties Of Low- And High-Oleic Vegetable Oils As Sustainable Bio-Based Lubricants, Abiodun Saka, Tobechukwu K. Abor, Anthony C. Okafor, Monday U. Okoronkwo

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Vegetable oil-based lubricants have attracted increased research attention in recent decades as sustainable alternatives to conventional petroleum-based lubricants in metal machining. However, more studies are required to fully elucidate the thermo-rheological and tribological properties. This study presents an investigation of the thermo-rheological and tribological properties of different vegetable oils, including low- and high-oleic soybean oil, high-oleic sunflower, safflower, and canola oils. The lubricity, and evolution of viscosity and thermodynamic properties as a function of temperature were investigated to obtain important parameters including the viscosity index, flow behavior index, flow activation energy, specific heat capacity, thermal conductivity, coefficient of friction, contact …

Go to article

Generative Adversarial Networks For Dimensionality Reduction In Evtol Aircraft Takeoff Trajectory Optimization, Samuel Sisk, Farzaam Khorasani-Gerdehkouhi, Abdulaziz Abutunis, K. Chandrashekhara, Xiaosong Du Jan 2025

Generative Adversarial Networks For Dimensionality Reduction In Evtol Aircraft Takeoff Trajectory Optimization, Samuel Sisk, Farzaam Khorasani-Gerdehkouhi, Abdulaziz Abutunis, K. Chandrashekhara, Xiaosong Du

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Electric vertical takeoff and landing (eVTOL) aircraft play a key role in urban air mobility (UAM), which aims to alleviate traffic congestion in urban areas. Despite their value, eVTOL aircraft suffer from battery energy consumption, which affects their range and endurance in real world flight tasks. Especially, the takeoff process has been identified for excessive power demands. Multidisciplinary analysis and optimization manage to discover optimal takeoff trajectories with minimum energy consumption while balancing multidisciplinary trade-offs, such as short distance takeoff and passengers' comfort. However, conventional parametrization methods (such as B-spline curves) leverage an empirically high-dimensional design space to include real …

Go to article

Ai-Powered Image-Based Assessment Of Pressure Injuries Using You Only Look Once (Yolo) Version 8 Models, Mehedi Hasan Tusar, Fateme Fayyazbakhsh, Niloofar Zendehdel, Eduard Mochalin, Igor Melnychuk, Lisa Gould, Ming C. Leu Jan 2025

Ai-Powered Image-Based Assessment Of Pressure Injuries Using You Only Look Once (Yolo) Version 8 Models, Mehedi Hasan Tusar, Fateme Fayyazbakhsh, Niloofar Zendehdel, Eduard Mochalin, Igor Melnychuk, Lisa Gould, Ming C. Leu

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Objective: The primary objective of this study is to enhance the detection and staging of pressure injuries using machine learning capabilities for precise image analysis. This study explores the application of the You Only Look Once version 8 (YOLOv8) deep learning model for pressure injury staging. Approach: We prepared a high-quality, publicly available dataset to evaluate different variants of YOLOv8 (YOLOv8n, YOLOv8s, YOLOv8m, YOLOv8l, and YOLOv8x) and five optimizers (Adam, AdamW, NAdam, RAdam, and stochastic gradient descent) to determine the most effective configuration. We followed a simulation-based research approach, which is an extension of the Consolidated Standards of Reporting Trials …

Go to article

Multifidelity Dust Erosion Analysis Of Mars Entry Vehicles, Adam Boland, Dominic Zanti, Serhat Hosder, Andrew Hinkle Jan 2025

Multifidelity Dust Erosion Analysis Of Mars Entry Vehicles, Adam Boland, Dominic Zanti, Serhat Hosder, Andrew Hinkle

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The objective of this paper is to present a multifidelity approach for estimating recession rate and kinetic energy impact rate on the surface of planetary entry vehicles operating in dusty atmospheric environments at hypersonic speeds. The multifidelity model used a co-Kriging approach that combined a low-fidelity correlation with a correction factor from high-fidelity CFD solutions. The developed multifidelity model enables efficient and accurate exploration of a design space to determine at what conditions encountering dust is most dangerous to TPS survivability. Two sample problems are used to demonstrate the effectiveness of the approach: the Mars 2020 lander and a HIAD-type …

Go to article

Improving Neural Network Efficiency With Multi-Fidelity And Dimensionality Reduction Techniques, Vignesh Sella, Thomas O'Leary-Roseberry, Xiaosong Du, Mengwu Guo, Joaquim R.R.A. Martins, Omar Ghattas, Karen Willcox, Anirban Chaudhuri Jan 2025

Improving Neural Network Efficiency With Multi-Fidelity And Dimensionality Reduction Techniques, Vignesh Sella, Thomas O'Leary-Roseberry, Xiaosong Du, Mengwu Guo, Joaquim R.R.A. Martins, Omar Ghattas, Karen Willcox, Anirban Chaudhuri

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Design problems in aerospace engineering often require numerous evaluations of expensive to-evaluate high-fidelity models, resulting in prohibitive computational costs. One way to address the computational cost is through building surrogates, such as deep neural networks (DNNs). However, DNNs may only be an effective surrogate when sufficient evaluations of the high-fidelity model are required such that the up-front training cost is amortized, or in situations that require real-time responses (such as interactive visualizations). Typically, the data requirements for adequately accurate training of DNNs are often impractical for engineering applications. To alleviate this issue, the proposed work utilizes output dimensionality reduction along …

Go to article

Tensile Behavior Of Directed Energy Deposited Bi-Metallic Ti-Ni-Based Alloy At Interfacial Area, Yitao Chen, Cesar Ortiz Rios, Frank Liou Jan 2025

Tensile Behavior Of Directed Energy Deposited Bi-Metallic Ti-Ni-Based Alloy At Interfacial Area, Yitao Chen, Cesar Ortiz Rios, Frank Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

A Ti-Ni-based bi-metallic shape memory alloy was fabricated using directed energy deposition, and the tensile testing behavior at two sections after post-heat treatments were focused. The Ti-rich Ti-Ni-Cu ternary shape memory alloy was first fabricated on a TiNi shape memory alloy with near-equiatomic composition to achieve multi-functional shape memory behaviors using powder-based additive manufacturing. The bi-metallic part then underwent 400°C and 600°C heat treatment at the interfacial area, and the interfacial area was subject to tensile loading and unloading. The digital image correlation technique was applied to extract the tensile stress–strain behavior and map out the local strain evolution of …

Go to article

Advancing Cislunar Space Domain Awareness Through Robust Optimization Framework For Optical Sensors-Based Autonomous Satellite Systems, Smriti Nandan Paul, Siwei Fan, Igor Panfil Jan 2025

Advancing Cislunar Space Domain Awareness Through Robust Optimization Framework For Optical Sensors-Based Autonomous Satellite Systems, Smriti Nandan Paul, Siwei Fan, Igor Panfil

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The number of cislunar resident space objects is expected to proliferate rapidly because of strategic interests targeting long-term presence on the Moon and exploration of other planets (e.g., Artemis Accords) and liberalization of space through the entry of private space players (e.g., Intuitive Machines). It necessitates expanding current near-Earth space domain awareness (SDA) operation systems and knowledge to the relatively unexplored cislunar region. Besides the traditional complexities, xGEO orbits (orbits beyond the geosynchronous Earth orbit (GEO) region) face additional challenges because of highly non-linear and non-Keplerian dynamics, which results in inaccuracies in uncertainty propagation and state estimation. Further challenges include …

Go to article

Hands-Free Uav Control: Real-Time Eye Movement Detection Using Eog And Lstm Networks, Niloofar Zendehdel, Khosro Ghorbani Zadeh, Haodong Chen, Yun Seong Song, Ming C. Leu Jan 2025

Hands-Free Uav Control: Real-Time Eye Movement Detection Using Eog And Lstm Networks, Niloofar Zendehdel, Khosro Ghorbani Zadeh, Haodong Chen, Yun Seong Song, Ming C. Leu

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Industry 4.0 has created a growing need for effective human-robot collaboration (HRC). As robots and humans work more closely together, efficient communication becomes essential for coordinating their actions seamlessly. While speech may seem like the obvious choice for communication, noisy factory environments can render it impractical. Additionally, workers often have their hands occupied with assembly tasks, making hand-controlled interfaces less practical for controlling robots. To address these challenges, this paper presents a novel, hands-free method for robot control using electrooculography (EOG) signals–specifically, eye movements and blinks–with unmanned aerial vehicles (UAVs) used as the demonstration platform. We developed a real-time system …

Go to article

Characterizing Intralaminar Distal Crack And Delamination In Multidirectional Laminates Under Low Velocity Impact: Modeling Approach With Ultrasound Testing Validation, Niildiip Chandraa, Rachel Van Lear, Arief Yudhanto, Yuqing Zhao, David A. Jack, Douglas E. Smith Jan 2025

Characterizing Intralaminar Distal Crack And Delamination In Multidirectional Laminates Under Low Velocity Impact: Modeling Approach With Ultrasound Testing Validation, Niildiip Chandraa, Rachel Van Lear, Arief Yudhanto, Yuqing Zhao, David A. Jack, Douglas E. Smith

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Multidirectional laminated composites are essential for load-bearing structures, especially under frequent impact loading. While existing modeling techniques simulate various impact damage modes, our understanding of the underlying mechanisms, specifically the initiation and progression of intralaminar distal cracks and interlaminar delamination, needs improvement. Validating these mechanisms is crucial for enhancing modeling accuracy and expediting the design process. In this work, we propose a three-dimensional finite element modeling (3D FEM) approach aimed at elucidating the impact damage mechanisms in multidirectional carbon fiber reinforced polymer (CFRP). Our model incorporates cohesive zone models (CZM) to simulate the behavior of intralaminar cracks at distal points …

Go to article

Physics-Constrained Generative Artificial Intelligence For Rapid Takeoff Trajectory Design, Samuel Sisk, Xiaosong Du Jan 2025

Physics-Constrained Generative Artificial Intelligence For Rapid Takeoff Trajectory Design, Samuel Sisk, Xiaosong Du

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The urban air mobility (UAM) industry is rapidly growing to alleviate regional transportation congestion. Electric vertical takeoff and landing (eVTOL) aircraft plays a critical role in this growth due to their efficiency and reduced operating cost. However, excessive energy demands by the takeoff phase impact the practicality of the aircraft. Conventional multidisciplinary analysis and optimization (MDAO) identifies a minimum energy trajectory but can be computationally intensive due to iteratively evaluating high-fidelity simulation models. In addition, complex constraints in practical MDAO pose crucial challenges to the already demanding process. Surrogate models enable efficient design optimization, but complex constraints could prohibit surrogate-based …

Go to article

Versatile Injector Platform: A Modular Design For Supersonic Flow Research, Connor Bell, Davide Viganò Jan 2025

Versatile Injector Platform: A Modular Design For Supersonic Flow Research, Connor Bell, Davide Viganò

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Fuel–air mixing remains a critical challenge in the development of high-speed air-breathing propulsion due to the extremely short residence times in supersonic combustors. Experimental studies are essential to investigate the underlying mixing mechanisms, but they require injection systems that can deliver repeatable and controlled flow conditions. In this work, we present the design of a modular strut-type injection platform developed for the Missouri S&T Supersonic Wind Tunnel. In its initial configuration, the platform features a planar trailing-edge slit to generate a two-dimensional jet and includes interchangeable trailing-edge modules to support a wide range of geometries and flow-control strategies. Designed with …

Go to article

Reliability Of Cazro3 And Mgo Capacitors At High Temperatures, Alan Devoe, Hung Trinh, Fatih Dogan Jan 2025

Reliability Of Cazro3 And Mgo Capacitors At High Temperatures, Alan Devoe, Hung Trinh, Fatih Dogan

Materials Science and Engineering Faculty Research & Creative Works

Calcium zirconate and magnesium oxide have both been found to have useful dielectric properties at high temperatures. Multilayer ceramic capacitors (MLCCs) were made with these dielectrics and platinum electrodes. The relationship between the lifespan (meantime to failure) and applied voltage was determined using Weibull statistics. CaZrO3 capacitors were tested between 550°C and 600°C while MgO capacitors were tested between 600°C and 650°C. The temperature coefficient Ea and the voltage coefficient n of the Prokopowicz–Vaskas equation were determined under various test conditions. Activation energies for calcium zirconate and magnesium oxide were 3.25 eV and 3.48 eV, respectively. Resistance degradation of …

Go to article

Mindful Or Mindless? How And Why Virtual Communities Fail To Contain Information Pollution Across Different Disasters, Mahmudul Hasan, Varqa Shamsi Bahar, Cecil Eng Huang Chua, Michael David Myers Jan 2025

Mindful Or Mindless? How And Why Virtual Communities Fail To Contain Information Pollution Across Different Disasters, Mahmudul Hasan, Varqa Shamsi Bahar, Cecil Eng Huang Chua, Michael David Myers

Business and Information Technology Faculty Research & Creative Works

People visit virtual communities to find trusted information (i.e. verifiable, accurate and reliable information) during disasters. Virtual communities are open spaces where people interact and share information. However, virtual communities often suffer from information pollution (including too much information and false or contradictory information) which decreases peoples' ability to find trusted information. Oddly, some virtual communities will develop useful practices for combatting information pollution during one disaster but subsequently fail to effectively employ the same practices or adapt them in subsequent disasters. We conducted a longitudinal, exploratory cross-case study to better understand how and why this occurs. Using the lenses …

Go to article

Synthesis And Characterization Of Free Radical Scavenging Dendrimer Nanogels Via Cross-Linking Reaction-Enabled Flash Nanoprecipitation, Lin Qi, Da Huang, Huari Kou, Anna Chernatynskaya, Nuran Ercal, Hu Yang Jan 2025

Synthesis And Characterization Of Free Radical Scavenging Dendrimer Nanogels Via Cross-Linking Reaction-Enabled Flash Nanoprecipitation, Lin Qi, Da Huang, Huari Kou, Anna Chernatynskaya, Nuran Ercal, Hu Yang

Chemistry Faculty Research & Creative Works

This work reports the development and evaluation of dendrimer-based nanogels based on Poly amidoamine (PAMAM) dendrimer generation 5, engineered to act as a carrier with reactive oxygen species (ROS)-scavenging capabilities. We developed a cross-linking reaction-enabled flash nanoprecipitation method in which the cross-linking reaction occurs during the flash nanoprecipitation process to form a cross-linked nanostructure. Using this approach, an N-hydroxy succinimide (NHS)-functionalized ROS-responsive thioketal cross-linker (TK-NHS) was synthesized and utilized to cross-link DAB-core PAMAM dendrimer G5, resulting in the formation of G5-TK nanogels. The resulting nanogels were characterized using dynamic light scattering and transmission electron microscopy, and their cytocompatibility, irritancy, cellular …

Go to article

Scalable Fabrication Of High-Payload Dendrimer-Based Nanoparticles For Targeted Atherosclerosis Therapy, Huari Kou, Lin Qi, Da Huang, Jiandong Wu, Honglan Shi, Hu Yang Jan 2025

Scalable Fabrication Of High-Payload Dendrimer-Based Nanoparticles For Targeted Atherosclerosis Therapy, Huari Kou, Lin Qi, Da Huang, Jiandong Wu, Honglan Shi, Hu Yang

Chemistry Faculty Research & Creative Works

Nanoparticle-based therapeutics hold promise for the treatment of atherosclerosis, but challenges such as low drug-loading capacity and a lack of scalable, controllable production hinder their clinical translation. Flash nanoprecipitation, a continuous synthesis method, offers a potential solution for scalable and reproducible nanoparticle production. In this study, we employed a custom-designed multi-inlet vortex mixer to perform cross-linking reaction-enabled flash nanoprecipitation, facilitating controlled and scalable synthesis of cross-linked Poly amidoamine (PAMAM) dendrimer nanoparticles. Notably, this approach allows simultaneous nanoparticle cross-linking and drug loading in a single step. The mannose moiety enabled specific targeting of macrophages via mannose receptors, enhancing the localization of …

Go to article

Unveiling Pseudocapacitance: A Kinetic Treatment Of The Pseudocapacitive Biosensor, Rokas Gerulskis, Egor Baiarashov, Maryam Karimi, Wassim El Housseini, Shelley D. Minteer Jan 2025

Unveiling Pseudocapacitance: A Kinetic Treatment Of The Pseudocapacitive Biosensor, Rokas Gerulskis, Egor Baiarashov, Maryam Karimi, Wassim El Housseini, Shelley D. Minteer

Chemistry Faculty Research & Creative Works

A kinetic framework is introduced for a pseudocapacitive potentiometric biosensor. Mathematical derivation and kinetic modeling demonstrate that experimentally observed linearity in analyte-OCP response arises from a dynamic equilibrium between competing redox reactions on a single electrode. This system can be expanded to develop a new generation of biosensors.

Go to article

First Prev Next Last