Open Access. Powered by Scholars. Published by Universities.®

Digital Commons Network™

Open Access. Powered by Scholars. Published by Universities.®

Missouri University of Science and Technology

Discipline
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 481 - 510 of 17264

Full-Text Articles in Entire DC Network

Local Hydrodynamics And Phase Distribution In Large-Scale Trickle Bed Reactors Using Multi-Detector Γ-Ray Densitometry, Sebastián Uribe, Ahmed Jasim, Saba A. Gheni, Nora Selem, Nouhaila Filali, Tiberiu M. Leib, Sourav Sengupta, Muthanna H. Al-Dahhan Dec 2025

Local Hydrodynamics And Phase Distribution In Large-Scale Trickle Bed Reactors Using Multi-Detector Γ-Ray Densitometry, Sebastián Uribe, Ahmed Jasim, Saba A. Gheni, Nora Selem, Nouhaila Filali, Tiberiu M. Leib, Sourav Sengupta, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

This study presents a new approach of using gamma ray computed tomography (CT) in a form of arc multi-detector γ-Ray Densitometry (Arc MD-GRD) Technique where it measures the line averaged holdups of the phases which are projected on the diameter of the column to obtain their diameter profiles. This technique then was used to investigate the diameter profiles of the phases' holdups in a 12-inch diameter trickle bed reactor (TBR) using sulfur hexafluoride (SF6) as the gas phase to represent to a certain extent the industrial higher density of the used gas phase due to either the type of the …

Go to article

Draft Genome Sequences Of Four Phosphate-Solubilizing Microbes Of The Family Burkholderiaceae Isolated From Tailings From The Former Pea Ridge Mine In Washington County, Mo, Usa, Prince Oppong Amoh, Abiodun E. Idowu, Elizabeth R. Grube, Melanie R. Mormile, Hunter W. Schroer Dec 2025

Draft Genome Sequences Of Four Phosphate-Solubilizing Microbes Of The Family Burkholderiaceae Isolated From Tailings From The Former Pea Ridge Mine In Washington County, Mo, Usa, Prince Oppong Amoh, Abiodun E. Idowu, Elizabeth R. Grube, Melanie R. Mormile, Hunter W. Schroer

Biological Sciences Faculty Research & Creative Works

We present draft genome sequences of four Gram-negative phosphate-solubilizing microbes isolated from Pea Ridge Mine tailings in Missouri, USA. Belonging to the family Burkholderiaceae, these isolates exhibit a phosphate-mineral-dissolving phenotype in liquid and solid cultures. Genome sizes span 5.6–9.7 Mb, with GC contents of 61.6%–67.0%.

Go to article

Early Career Setback And Future Achievement In Professional Sports, Suman Kalyan Maity, Yang Wang, Nima Dehmamy, Victoria Medvec, Brian Uzzi, Dashun Wang Dec 2025

Early Career Setback And Future Achievement In Professional Sports, Suman Kalyan Maity, Yang Wang, Nima Dehmamy, Victoria Medvec, Brian Uzzi, Dashun Wang

Computer Science Faculty Research & Creative Works

A central tenet of human performance posits that past success is a key predictor of future outcomes. This principle underpins selection processes in various human endeavors, shaping opportunity, wage, and winner-take-all inequalities. Here we systematically examine the future performance of previous winners and non-winners across two sports contexts using two different empirical strategies. First, we track young athletes participating in world-class track and field competitions and compare the future performance of bronze medalists to those finishing just shy of the podium. Next, we study a novel natural experiment in tennis, where we compare future performances of 'lucky losers'—players who advanced …

Go to article

Dendrimer Gel Nanoparticles With Dual-Targeting Of Upar And Ribonucleotide Reductase R2 Influence Necrosis, Apoptosis, And Cell Cycle Arrest In Triple-Negative Breast Cancer, Hsin Yin Chuang, Yue-Wern Huang, Hu Yang Dec 2025

Dendrimer Gel Nanoparticles With Dual-Targeting Of Upar And Ribonucleotide Reductase R2 Influence Necrosis, Apoptosis, And Cell Cycle Arrest In Triple-Negative Breast Cancer, Hsin Yin Chuang, Yue-Wern Huang, Hu Yang

Biological Sciences Faculty Research & Creative Works

Triple-negative breast cancer (TNBC) is an aggressive breast cancer subtype with limited treatment options due to the absence of estrogen (ER), progesterone (PR), and human epidermal growth factor receptor 2 (HER2) receptors. We previously developed highly adaptable polyamidoamine (PAMAM) dendrimer-based gel nanoparticles (GDP-uPA/GTI) with dual-targeting capabilities against urokinase-type plasminogen activator receptor (uPAR) and ribonucleotide reductase R2 (R2) to achieve selective antitumor effects. In this study, we investigated the underlying mechanisms of GDP-uPA/GTI-induced tumor inhibition. In vivo, GDP-uPA/GTI significantly downregulated R2 expression and activated caspase 8 and caspase 3, indicating caspase-dependent apoptosis. Histological evaluation of major organs revealed no observable toxicity. …

Go to article

Catalytic Synthesis Of Iron-Doped Graphitic Aerogels From Poly(Phloroglucinol-Terephthalaldehyde – Urethane) Precursors, Stephen Yaw Owusu, Rushi U. Soni, Chariklia Sotiriou-Leventis Dec 2025

Catalytic Synthesis Of Iron-Doped Graphitic Aerogels From Poly(Phloroglucinol-Terephthalaldehyde – Urethane) Precursors, Stephen Yaw Owusu, Rushi U. Soni, Chariklia Sotiriou-Leventis

Chemistry Faculty Research & Creative Works

We report a new class of graphitic carbon aerogel precursors based on iron oxide-doped poly(phloroglucinol-terephthalaldehyde–urethane) (T-POL/PU-FeOx) networks. The hybrid polymeric network incorporates a rigid aromatic triisocyanate, tris(4-isocyanatophenyl)methane, which reacts in situ with the hydroxyl groups of phloroglucinol to form a polyurethane-containing framework. Monolithic aerogels derived from this system undergo catalytic graphitization at significantly reduced temperatures (800–1500 °C) compared to conventional graphitization (2500–3300 °C). An oxidative ring fusion aromatization step (240 °C, air) prior to pyrolysis enhanced the degree of graphitization. The resulting graphitic aerogels were characterized by XRD, Raman spectroscopy, TGA, TEM, SEM, XPS, and N₂ sorption porosimetry. Compared to …

Go to article

Bone Void Filler Materials For Augmentation In Comminuted Fractures: A Comprehensive Review, S. Sina Mohammadi, Sunjeev S. Phull, B. Sonny Bal, Mark R. Towler Dec 2025

Bone Void Filler Materials For Augmentation In Comminuted Fractures: A Comprehensive Review, S. Sina Mohammadi, Sunjeev S. Phull, B. Sonny Bal, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

Comminuted fractures, characterized by multiple bone fragments, present significant challenges in orthopedic surgery. Effective treatment often requires augmentation techniques to enhance fixation stability and promote bone regeneration. This review explores the application of bone void filler materials, including autografts, allografts, polymethyl methacrylate (PMMA), and synthetic bone substitutes such as calcium phosphate ceramics and bioactive glass, in managing comminuted fractures. Autografts are the gold standard due to their superior osteogenic potential but are limited by donor site morbidity and availability. Allografts mitigate these issues but face concerns regarding immunogenicity and reduced biological activity. PMMA, widely used for structural augmentation, provides immediate …

Go to article

Resolving The Energy Efficiency Paradox: Leveraging Benefits For Saudi Arabia’S Building Sector, Fateh Belaïd, Mahelet G. Fikru Dec 2025

Resolving The Energy Efficiency Paradox: Leveraging Benefits For Saudi Arabia’S Building Sector, Fateh Belaïd, Mahelet G. Fikru

Economics Faculty Research & Creative Works

This article examines the economics of energy efficiency in Saudi Arabia's building sector, centering on the "energy efficiency paradox," the observed under adoption of cost-effective technologies despite their clear benefits—such as reducing energy use and associated emissions. We show that a mix of market barriers and behavioral biases—including split incentives, informational gaps, and the value-action gap—constrains adoption of energy-efficient solutions. Recent modeling suggests that improved air-conditioning labels could save up to 80 TWh of electricity annually, though rebound effects may erode some of these gains. Our analysis shows that tackling market failures is necessary but not enough. Strong building codes …

Go to article

Enhancing Management Of Transportation Projects: Integration Factors For Using Smart Contracts, Mariam Elazhary, Islam H. El-Adaway Dec 2025

Enhancing Management Of Transportation Projects: Integration Factors For Using Smart Contracts, Mariam Elazhary, Islam H. El-Adaway

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The US Department of Transportation (USDOT) delivers a wide range of infrastructure projects, backed by a fiscal year 2023 budget exceeding $100 billion. These projects face mounting pressures to meet performance, accountability, and delivery standards, driven by their dependence on public funding and their operational complexity. Transportation infrastructure presents sector-specific challenges - such as time-sensitive user disruptions, multiparty coordination, and asset intersection risks - that demand more robust, automated, and transparent project delivery mechanisms. Blockchain-enabled smart contracts have emerged as a promising solution to address these operational pain points through real-time automation, immutable data records, and decentralized transaction processing. However, …

Go to article

Experimental Determination Of Tnt Equivalence Values For Binary Energetic Materials, Gracie May M. James, Rachel L. Bauer, Emily M. Johnson, Catherine E. Johnson Dec 2025

Experimental Determination Of Tnt Equivalence Values For Binary Energetic Materials, Gracie May M. James, Rachel L. Bauer, Emily M. Johnson, Catherine E. Johnson

Mining Engineering Faculty Research & Creative Works

TNT equivalency quantifies the impact of energetic materials relative to TNT, aiding in safety guidelines and performance evaluations. Despite widespread use in industry, military, and research, many binary energetics lack published TNT equivalence values. This study experimentally determines TNT equivalency values for Helix, Texpak, Rimfire, Tannerite, and Kinepak using three tests: (1) plate dent, (2) reaction velocity and (3) air blast. Each test evaluates distinct aspects of energetic performance, addressing both close-in destructive power and downstream effects. Helix produced TNT equivalence values from 0.64 to 1.10, comparable to TNT, while Kinepak had lower values (0.18 to 0.58) indicating limited brisance, …

Go to article

Learning-Assisted Schedulability Analysis: Opportunities And Limitations, Sanjoy Baruah, Pontus Ekberg, Marion Sudvarg Dec 2025

Learning-Assisted Schedulability Analysis: Opportunities And Limitations, Sanjoy Baruah, Pontus Ekberg, Marion Sudvarg

Computer Science Faculty Research & Creative Works

We present the first (to our knowledge) Deep-Learning based framework for real-time schedulability-analysis that guarantees to never incorrectly mis-classify an unschedulable system as being schedulable, and is hence suitable for use in safety-critical scenarios. We relate applicability of this framework to well-understood concepts in computational complexity theory: membership in the complexity class NP. We apply the framework upon the widely-studied schedulability analysis problems of determining whether a given constrained-deadline sporadic task system is schedulable on a preemptive uniprocessor under both Deadline-Monotonic and EDF scheduling. As a proof-of-concept, we implement our framework for Deadline-Monotonic scheduling, and demonstrate that it has a …

Go to article

Unlocking The Potential Of Copper Sulfide Tailings As A Secondary Source For Tellurium And Precious Metals: A Comprehensive Characterization Study, Fardis Nakhaei, Lana Alagha, Gary Wyss Dec 2025

Unlocking The Potential Of Copper Sulfide Tailings As A Secondary Source For Tellurium And Precious Metals: A Comprehensive Characterization Study, Fardis Nakhaei, Lana Alagha, Gary Wyss

Mining Engineering Faculty Research & Creative Works

This study investigated historical copper sulfide tailings as an unconventional source of tellurium (Te), gold (Au), and silver (Ag). Advanced analytical studies were conducted to determine the geochemical and mineralogical properties of the tailing samples. The results showed that tetradymite (Bi2Te2S) was the predominant Te-bearing mineral, while hessite (Ag2Te) was a minor Te carrier, both notably occurring within fine-grained (< 8 μm) inclusions in pyrite. Gold was present as native Au, electrum (Au-Ag), and within complex silver tellurides hosted primarily in chalcopyrite and pyrite. Froth flotation studies showed that the 180 to 38 μm size range was the optimum feed size that yielded recoveries of 59 %, 37 %, and 27 % for Te, Au, and Ag, respectively. These findings suggested that froth flotation is a feasible method for concentrating Te-Au-Ag-bearing phases. Given the strong association between Te, Au, Ag, and Cu, the co-extraction of these metals should significantly enhance the economic viability of tailings' processing.

Go to article

Method To Measure Blast Overpressure Exposure On Military Personnel Using Orthogonal Sensor Orientations, Nicholas W. Kuehl, Catherine E. Johnson Dec 2025

Method To Measure Blast Overpressure Exposure On Military Personnel Using Orthogonal Sensor Orientations, Nicholas W. Kuehl, Catherine E. Johnson

Mining Engineering Faculty Research & Creative Works

Measuring and recording blast exposure to military personnel from shoulder-fired weaponry or improvised explosive devices to correlate health outcomes like mild traumatic brain injury has been a goal for many years. To ensure overpressure is recorded, sensor manufacturers either recommend multiple sensors on different parts of the body or have integrated multiple sensors into one unit. Despite this, knowing the sensor orientation in relation to the blast source is important to know if it's a head on, side on or oblique pressure recording. This research investigates whether pressures recorded at three independent orientations in the x, y and z planes …

Go to article

Effects Of Wc Additions On The Phase Formation Of (Hf,Nb,Ta,Ti,Zr)C-(Hf,Nb,Ta,Ti,Zr)B2 High Entropy Dual Phase Ceramics, Rubia Hassan, William G. Fahrenholtz, Gregory E. Hilmas Dec 2025

Effects Of Wc Additions On The Phase Formation Of (Hf,Nb,Ta,Ti,Zr)C-(Hf,Nb,Ta,Ti,Zr)B2 High Entropy Dual Phase Ceramics, Rubia Hassan, William G. Fahrenholtz, Gregory E. Hilmas

Materials Science and Engineering Faculty Research & Creative Works

High entropy dual phase (Hf,Nb,Ta,Ti,Zr)C-(Hf,Nb,Ta,Ti,Zr)B2 ultra-high temperature ceramics were produced from powders synthesized by boro-carbothermal reduction. Systematic additions of 2.5 wt%, 5 wt%, and 10 wt% WC were incorporated after powder synthesis. Additions of 2.5 wt% and 5 wt% WC dissolved into the host ceramics, resulting in complete solid solution formation and nearly full densification. In contrast, a secondary monoboride phase evolved for the composition with 10 wt% WC, in addition to the main high entropy carbide and diboride phases. Thermodynamic analysis revealed that WB formation was favorable for WC additions in the presence of metal diborides at the sintering …

Go to article

Thermal Properties Of High Entropy Dual Phase (Hf,Nb,Ta,Ti,Zr,)C-(Hf,Nb,Ta,Ti,Zr)B2 Ceramics: Comparison With The High Entropy Single-Phase Ceramics And The Effect Of Wc Additions, Rubia Hassan, William G. Fahrenholtz, Gregory E. Hilmas Dec 2025

Thermal Properties Of High Entropy Dual Phase (Hf,Nb,Ta,Ti,Zr,)C-(Hf,Nb,Ta,Ti,Zr)B2 Ceramics: Comparison With The High Entropy Single-Phase Ceramics And The Effect Of Wc Additions, Rubia Hassan, William G. Fahrenholtz, Gregory E. Hilmas

Materials Science and Engineering Faculty Research & Creative Works

The heat capacity, thermal diffusivity and thermal conductivity of (Hf,Nb,Ta,Ti,Zr)C-(Hf,Nb,Ta,Ti,Zr)B2 high entropy dual phase ceramics were evaluated from room temperature to 1800 °C and compared with the constituent high entropy single phase ceramics of the same nominal compositions. Thermal conductivity of the (Hf,Nb,Ta,Ti,Zr)C-(Hf,Nb,Ta,Ti,Zr)B2 dual phase ceramic increased from 17.7 W m−1 K−1 at room temperature to 54 W m−1 K−1 at 1800 °C. The addition of WC to the dual phase ceramic reduced its thermal conductivity. For the addition of 5 wt% WC, room temperature thermal conductivity was 16.8 W m−1 K−1 …

Go to article

A Precipitation-Hardened High-Entropy Alloy With Excellent Mechanical Properties Additively Manufactured By In-Situ Alloying, Matthew Luebbe, Shahryar Mooraj, Jonathan Poplawsky, Hans Pommerenke, Wen Chen, Haiming Wen Dec 2025

A Precipitation-Hardened High-Entropy Alloy With Excellent Mechanical Properties Additively Manufactured By In-Situ Alloying, Matthew Luebbe, Shahryar Mooraj, Jonathan Poplawsky, Hans Pommerenke, Wen Chen, Haiming Wen

Materials Science and Engineering Faculty Research & Creative Works

Studies on precipitation-hardened high-entropy alloys (PHEAs) have demonstrated high strength, good ductility, and thermal stability, making them excellent candidates for high-temperature structural applications such as nuclear reactors. However, many complex parts for those applications would need to be produced via additive manufacturing (AM), whose rapid cooling rates and multiple heating cycles could change the microstructure of the chosen alloys and accordingly their mechanical properties. A PHEA, (Fe0.3Ni0.3Mn0.3Cr0.1)88Ti4Al8, which was developed and produced via conventional manufacturing in our previous work with high strength but low ductility, was chosen to test the effects of AM on the microstructure and mechanical properties. Scanning …

Go to article

Effect Of Powder Recycling On Powder Characteristics And Mechanical Properties Of Materials Produced By Laser Powder Bed Fusion (Lpbf): A Review, Mihiretu Ganta, Marta Kurek, Arezoo Emdadi, Tadeusz Łagoda, Marek Pagáč Dec 2025

Effect Of Powder Recycling On Powder Characteristics And Mechanical Properties Of Materials Produced By Laser Powder Bed Fusion (Lpbf): A Review, Mihiretu Ganta, Marta Kurek, Arezoo Emdadi, Tadeusz Łagoda, Marek Pagáč

Materials Science and Engineering Faculty Research & Creative Works

As the Laser powder bed fusion (LPBF) process advances toward industrial-scale production, the sustainability of metal powder feedstocks has become a focal point of research. The powder recycling approach, while environmentally and economically favorable, results in a series of physicochemical variations that could compromise the part quality. The resulting variation in powder characteristics with powder recycling could affect the powder layer density and melt pool dynamics, resulting in defect formation and hindering the structural integrity of LPBFed parts. These alterations pose significant constraints to mechanical performance, particularly in fatigue-sensitive applications where even minor imperfections can substantially reduce service life. The …

Go to article

Variable-Temperature Plasmonic High-Entropy Carbides, Simon Divilov, Sean D. Griesemer, Robert C. Koennecker, Michael J. Ammendola, Adam C. Zettel, Hagen Eckert, Jeffrey R. Shallenberger, Xiomara Campilongo, William G. Fahrenholtz, Arrigo Calzolari, Douglas E. Wolfe, Stefano Curtarolo Dec 2025

Variable-Temperature Plasmonic High-Entropy Carbides, Simon Divilov, Sean D. Griesemer, Robert C. Koennecker, Michael J. Ammendola, Adam C. Zettel, Hagen Eckert, Jeffrey R. Shallenberger, Xiomara Campilongo, William G. Fahrenholtz, Arrigo Calzolari, Douglas E. Wolfe, Stefano Curtarolo

Materials Science and Engineering Faculty Research & Creative Works

Effective thermal management at variable and extreme temperatures face limitations for the development of novel energy and aerospace applications. Plasmonic approaches, shown to be capable of tailoring black-body emission, could be effective if materials with high-temperature and tunable plasmonic resonance were available. Here, we report a synergy between experimental and theoretical results proving that many high-entropy transition metal carbides, consisting of four or more metals at equal molar ratio, have plasmonic resonance at room, high (>1000∘C) and variable temperatures. We also found that these high-entropy carbides can be tuned and show considerable plasmonic thermal cycling stability. This paradigm-shift approach …

Go to article

Tuning A Magnetic Energy Scale With Pressure And Field In Ute2, Hyunsoo Kim, I. Lin Liu, Wen Chen Lin, Yun Suk Eo, Sheng Ran, Nicholas P. Butch, Johnpierre Paglione Dec 2025

Tuning A Magnetic Energy Scale With Pressure And Field In Ute2, Hyunsoo Kim, I. Lin Liu, Wen Chen Lin, Yun Suk Eo, Sheng Ran, Nicholas P. Butch, Johnpierre Paglione

Physics Faculty Research & Creative Works

When a fragile ordered state is suppressed to zero temperature, a quantum phase transition occurs, which is often marked by the appearance of unconventional superconductivity. While the quantum critical point can be hidden, the influence of the quantum criticality extends to fairly high temperatures, manifesting non-Fermi liquid behavior in a wide range of the field-temperature-pressure phase space. Here, we report the tuning of a magnetic energy scale in the heavy-fermion superconductor UTe2, previously identified with a peak in the c-axis electrical transport temperature dependence, using applied hydrostatic pressures and a-axis-oriented magnetic fields as complementary (and opposing) tuning parameters: …

Go to article

Applications Of Machine Learning In Gravitational-Wave Research With Current Interferometric Detectors, Elena Cuoco, Marco Cavaglià, Ik Siong Heng, David Keitel, Christopher Messenger Dec 2025

Applications Of Machine Learning In Gravitational-Wave Research With Current Interferometric Detectors, Elena Cuoco, Marco Cavaglià, Ik Siong Heng, David Keitel, Christopher Messenger

Physics Faculty Research & Creative Works

This article provides an overview of the current state of machine learning in gravitational-wave research with interferometric detectors. Such applications are often still in their early days but have reached sufficient popularity to warrant an assessment of their impact across various domains, including detector studies, noise and signal simulations, and the detection and interpretation of astrophysical signals. In detector studies, machine learning could be useful to optimize instruments like LIGO, Virgo, KAGRA, and future detectors. Algorithms could predict and help in mitigating environmental disturbances in real time, ensuring detectors operate at peak performance. Furthermore, machine-learning tools for characterizing and cleaning …

Go to article

Time-Resolved 3d Momentum Spectroscopy In Continuous Wave Atomic Photoionization Experiments, K. L. Romans, B. P. Acharya, A. H.N.C.De Silva, K. Foster, O. Russ, Daniel Fischer Dec 2025

Time-Resolved 3d Momentum Spectroscopy In Continuous Wave Atomic Photoionization Experiments, K. L. Romans, B. P. Acharya, A. H.N.C.De Silva, K. Foster, O. Russ, Daniel Fischer

Physics Faculty Research & Creative Works

An experimental continuous-wave (cw) pump-probe scheme is demonstrated by investigating the population and photoionization dynamics of an atomic system. In particular, 6Li atoms are initially prepared in optically pumped 22S1/2 and 22P3/2 states before being excited via multi-photon absorption from a tunable femtosecond laser. The subsequent cascade back to the ground state is analyzed by ionizing the atoms in the field of a cw optical dipole trap laser. Conventional spectroscopic methods, such as standard cold-target recoil ion momentum spectroscopy or velocity map imaging, cannot provide simultaneous momentum and time-resolved information on an event-by-event basis for the system investigated here. The …

Go to article

Trust And Procedural Justice Mediate The Effects Of Ai Hiring On Organizational Attraction And Intent To Apply, Amaneh Babaee, Daniel Burton Shank Dec 2025

Trust And Procedural Justice Mediate The Effects Of Ai Hiring On Organizational Attraction And Intent To Apply, Amaneh Babaee, Daniel Burton Shank

Psychological Science Faculty Research & Creative Works

The growing emphasis on human capital has made it more critical for organizations to effectively attract, select, hire, onboard, utilize, and retain talent. While the integration of AI in recruitment offers unprecedented efficiency, scalability, reduced human bias, and optimized talent acquisition, its introduction generates challenges that may influence applicants' perceptions and behavioral intentions. Based on signaling and organizational justice theories, the lack of human relational cue and AI's transparency algorithms may lead job applicants to wonder whether the hiring process is trustworthy and procedurally just. Such challenges may alter not only how applicants interpret organizational values, but also whether they …

Go to article

Investigating The Correlation And Synergy Of Artificial Intelligence Techniques, Construction Technologies, And Their Key Benefits, Fareed Salih, Islam H. El-Adaway Dec 2025

Investigating The Correlation And Synergy Of Artificial Intelligence Techniques, Construction Technologies, And Their Key Benefits, Fareed Salih, Islam H. El-Adaway

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Despite its reputation as one of the least digitized sectors, the construction industry increasingly adopts artificial intelligence (AI) and construction technologies. However, previous research has not adequately explored the benefits of AI techniques and construction technologies nor the correlations between them. This study aims to fill this knowledge gap. To this end, the authors used a multistep research methodology. First, a systematic literature review of studies published between 1985 and 2022 was conducted to identify AI techniques and construction technologies. Second, content and frequency analysis were performed to determine the benefits associated with AI and technology adoption. Finally, a survey …

Go to article

Bond Behavior Of Full-Scale Beams Using Sustainable Self-Compacting Concrete, Hayder H. Alghazali, Atheer H.M. Algburi, John J. Myers Dec 2025

Bond Behavior Of Full-Scale Beams Using Sustainable Self-Compacting Concrete, Hayder H. Alghazali, Atheer H.M. Algburi, John J. Myers

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Sustainable concrete is a step towards greener and more eco-friendly concrete construction practices, helping to solve global environmental problems. The present study focuses on the bond behavior between steel reinforcement and greener self-compacting concrete, specifically sustainable self-compacting concrete (SUS-SCC). Three SUS-SCC mixtures with different fly ash (FA) to cement replacement levels of [50, 60, and 70% (by mass)] were developed. Twelve full-scale SUS-SCC beams with a cross-section of (305 x 57) mm and a total length of 3048 mm were cast and tested using a four-point load test setup. The effect of longitudinal and lateral steel reinforcement ratios in the …

Go to article

Friction And Texture Evaluation Of Asphalt-Based Binders As Alternatives To Epoxy-Based High-Friction Surface Treatments, Alireza Roshan, Magdy Abdelrahman Dec 2025

Friction And Texture Evaluation Of Asphalt-Based Binders As Alternatives To Epoxy-Based High-Friction Surface Treatments, Alireza Roshan, Magdy Abdelrahman

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

High-friction surface treatment (HFST) is a safety-focused pavement treatment that restores and maintains pavement friction to reduce road accidents. Traditional epoxy-based HFSTs, while widely used, face challenges such as high costs, potential compatibility issues with the substrate pavement, and long-term durability under specific conditions. This study investigates asphalt-based alternative HFST, which is compatible with various pavement types and cost-effective and versatile solutions for a wider range of pavement applications. Performance and friction testing, including the British pendulum test, British wheel test, and dynamic friction test, were performed to examine the coefficient of friction (COF) before and after polishing with a …

Go to article

Nonlinear Flow Structures From The Interaction Of Internal Waves With Topography, Matthew R. Klema, S. Karan Venayagamoorthy Dec 2025

Nonlinear Flow Structures From The Interaction Of Internal Waves With Topography, Matthew R. Klema, S. Karan Venayagamoorthy

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This paper presents numerical simulations of the interaction of first-mode internal waves with a topographic edge at the intermediate scale, O (100) m, with a focus on the evolution of flow structures. Flow structure variation and evolution is explored through direct modifications to the amplitude of the internal wave interacting with topographic features of varying wave-topographic slope (g/s), height of the topography to the total domain depth (ht/d), and the wave Froude number (Fr = U0/cph), where g is the internal wave slope, s is the topographic slope, ht is the height of the topography, d is the simulation depth, …

Go to article

Identifying Influential Assets In Higher Order Interdependent Infrastructure Networks Through Population Impact, Akshat Chulahwat, Emad M. Hassan, Mersedeh Tariverdi, Miguel Nunez-Del-Prado, Hussam Mahmoud Dec 2025

Identifying Influential Assets In Higher Order Interdependent Infrastructure Networks Through Population Impact, Akshat Chulahwat, Emad M. Hassan, Mersedeh Tariverdi, Miguel Nunez-Del-Prado, Hussam Mahmoud

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

A significant increase in catastrophic events worldwide has had a disastrous impact on the built environment, as these disruptive events devastate critical infrastructure lifelines, resulting in a substantial reduction of services across a community. Management of critical infrastructure assets is essential, and this can be achieved by optimal resource allocation to key assets within interconnected systems. The majority of current literature focuses on capturing the behavior of infrastructure systems individually, which presents a computational problem when dealing with complex, interdependent infrastructure systems. In this study, a comprehensive framework to evaluate a type of influence metric for ranking node and edge …

Go to article

The Equity Implications Of Pecuniary Externalities On An Electric Grid, Charles Sims, Gasser G. Ali, J. Scott Holladay, Tim Roberson, Chien Fei Chen, Islam H. El-Adaway Dec 2025

The Equity Implications Of Pecuniary Externalities On An Electric Grid, Charles Sims, Gasser G. Ali, J. Scott Holladay, Tim Roberson, Chien Fei Chen, Islam H. El-Adaway

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The adoption of rooftop photovoltaic (PV) systems can create upward pressure on retail electricity rates as utilities are forced to spread their fixed costs of generation and transmission across a smaller customer base. Since high-income households are more likely to purchase PV systems, low-income households may be disproportionately impacted by these rate increases. Using a novel combination of agent-based computational economic modeling and a choice experiment of rooftop solar adoption, we show how this pecuniary externality between low- and high-income customers increases low-income electricity bills by 10% in an area with some of the highest poverty rates in the United …

Go to article

Evaluating Crumb Rubber Modified (Crm) Asphalt As A Sustainable Binder Alternative For High-Friction Surface Treatments, Abdallah Aboelela, Alireza Roshan, Magdy Abdelrahman Dec 2025

Evaluating Crumb Rubber Modified (Crm) Asphalt As A Sustainable Binder Alternative For High-Friction Surface Treatments, Abdallah Aboelela, Alireza Roshan, Magdy Abdelrahman

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

High-friction surface treatments (HFSTs) are widely applied to improve pavement safety by enhancing long-term skid resistance. Although epoxy resins are commonly used due to their strength and durability, their high cost, susceptibility to delamination, incompatibility with substrates of flexible pavements, and adverse environmental concerns limit their long-term performance. This study presents crumb rubber modified (CRM) asphalt as a sustainable alternative binder for HFST applications. CRM binders offer high performance and compatibility with existing pavement surfaces, cost effectiveness and reduced environmental impacts as compared to epoxy binders. In addition, the binder development utilizes enhanced recycling technologies for interacting with used tire …

Go to article

Data Driven Design Of Ultra High Performance Concrete Prospects And Application, Bryan K. Aylas-Paredes, Taihao Han, Advaith Neithalath, Jie Huang, Ashutosh Goel, Aditya Kumar, Narayanan Neithalath Dec 2025

Data Driven Design Of Ultra High Performance Concrete Prospects And Application, Bryan K. Aylas-Paredes, Taihao Han, Advaith Neithalath, Jie Huang, Ashutosh Goel, Aditya Kumar, Narayanan Neithalath

Electrical and Computer Engineering Faculty Research & Creative Works

Ultra-high-performance concrete (UHPC) is a specialized class of cementitious composites that is increasingly used in various applications, including bridge decks, connections between precast components, piers, columns, overlays, and the repair and strengthening of bridge elements. The mechanical and durability properties of UHPC are significantly influenced by factors such as low water-to-binder ratios, the inclusion of supplementary cementitious materials (SCMs), and fiber reinforcement. Machine learning (ML) has been employed to predict the performance of UHPC and optimize its mixture designs by using various raw materials. This study first provides a comprehensive review of ML applications in UHPC, focusing on predicting workability, …

Go to article

Fluorosilane-Induced Softening And Collapse Of Micropillar Arrays, Gabriela Moreira Lana, Maja Fehlberg, Petra Herbeck-Engel, Gisela Heppe, Raimund Schlüßler, Torsten Jähnke, Eduard Arzt, Roland Bennewitz Nov 2025

Fluorosilane-Induced Softening And Collapse Of Micropillar Arrays, Gabriela Moreira Lana, Maja Fehlberg, Petra Herbeck-Engel, Gisela Heppe, Raimund Schlüßler, Torsten Jähnke, Eduard Arzt, Roland Bennewitz

Chemical and Biochemical Engineering Faculty Research & Creative Works

Replica molding is a widely used technique for the fabrication of polymer microstructures. As structural dimensions decrease, anti-stick surface treatment of the mold becomes increasingly critical to ensure clean demolding and preserve structural integrity. We fabricated arrays of micropillars with 20 µm diameter and 60 µm height using medical-grade polydimethylsiloxane (PDMS), MDX4-4210, and observed a high fraction of collapsed pillars for the first molding after fluorosilanization of the mold to reduce sticking. To address this issue, we systematically investigated the surface treatment protocol for the molds, made from the PDMS Sylgard 184. We provide results from complementary measurement methods, to …

Go to article

First Prev Next Last