Open Access. Powered by Scholars. Published by Universities.®

Digital Commons Network™

Open Access. Powered by Scholars. Published by Universities.®

Missouri University of Science and Technology

Discipline
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 451 - 480 of 17264

Full-Text Articles in Entire DC Network

Deep Learning Based High-Resolution Electromagnetic Inversion Imaging Using Deep Convolutional Double-Module Structure, He Ming Yao, Shiji Song, Lijun Jiang, Michael Ng Jan 2026

Deep Learning Based High-Resolution Electromagnetic Inversion Imaging Using Deep Convolutional Double-Module Structure, He Ming Yao, Shiji Song, Lijun Jiang, Michael Ng

Electrical and Computer Engineering Faculty Research & Creative Works

In this paper, a novel deep learning (DL) approach has been proposed to realize high-resolution electromagnetic (EM) inversion imaging. The newly proposed approach is based on the deep convolutional double-module structure (DCDMS), consisting of the pixel-interpolating module and the corresponding quality-improving module. While the pixel-interpolating module roughly increases the 'resolution' of the initial input, the following quality-improving module realizes quantitative EM imaging in high resolution. The input of the proposed DCDMS adopts the mixed input scheme, consisting of the received EM scattered field and the initial reconstruction in much low resolution computed from Gauss-Newton method. The output of the proposed …

Go to article

Enhancing Explainable Ai For Medical Imaging: Improved Lime Interpretation With Influence Mapping, Abiha Tahsin Chowdhury, Dhanush Bavisetti, Daniel B. Hier, Rahul Dubey, Tayo Obafemi-Ajayi Jan 2026

Enhancing Explainable Ai For Medical Imaging: Improved Lime Interpretation With Influence Mapping, Abiha Tahsin Chowdhury, Dhanush Bavisetti, Daniel B. Hier, Rahul Dubey, Tayo Obafemi-Ajayi

Electrical and Computer Engineering Faculty Research & Creative Works

The integration of artificial intelligence (AI) into medical imaging is progressing rapidly. It is essential for these AI tools to be transparent, interpretable, and explainable to gain the trust of clinicians and regulators. Current state-of-the-art explainable AI (XAI) techniques in imaging includes Local Interpretable Model-Agnostic Explanations (LIME), Shapley Additive Explanations (SHAP), and Gradient-weighted Class Activation Mapping (Grad-CAM). Recent studies have shown that LIME often suffers from inconsistency and unreliability which limits their utility in sensitive fields like medical imaging. This paper proposes Influence Map based Explanation (IME), an enhanced variant of the original LIME framework, that aggregates multiple runs to …

Go to article

Event-Based Predefined-Time Synchronization For Complex Networks With Deception Attacks: An Asynchronously Intermittent Strategy, Lei Xue, Jiong Yu, Haoyu Zhou, Yongbao Wu, Jian Liu, Donald C. Wunsch Jan 2026

Event-Based Predefined-Time Synchronization For Complex Networks With Deception Attacks: An Asynchronously Intermittent Strategy, Lei Xue, Jiong Yu, Haoyu Zhou, Yongbao Wu, Jian Liu, Donald C. Wunsch

Electrical and Computer Engineering Faculty Research & Creative Works

This article studies the practical predefined-time synchronization (PPTS) for complex networks (CNs) under deception attacks based on the asynchronously intermittent event-triggered control (AIE-TC). Notably, AIE-TC effectively integrates the advantages of asynchronously intermittent control (AIC) and event-triggered control, where AIC provides each subsystem node with independent control and rest intervals. Besides, all synchronization errors of the CNs converge to an adjustable neighborhood within the predefined time by designing a bounded time-varying function into the controller. Moreover, this article considers that the transmission network is subjected to stochastic deception attacks modeled by a Markov process, which captures the state-driven dynamic transition characteristics …

Go to article

Effect Of Sample Properties On Short-Circuited Waveguide Measurements For Materials Characterization, Alexander Hook, Jared Sinkey, Kristen M. Donnell Jan 2026

Effect Of Sample Properties On Short-Circuited Waveguide Measurements For Materials Characterization, Alexander Hook, Jared Sinkey, Kristen M. Donnell

Electrical and Computer Engineering Faculty Research & Creative Works

Microwave materials characterization measurements can be performed using a number of well-established approaches. One such approach, the filled transmission line approach featuring a short-circuited rectangular waveguide (SC-RWG) sample holder, is known to have sample placement restrictions related to measurement viability. This work focuses on this approach and addresses the measurement restrictions within the context of sample length and dielectric properties. The complex reflection properties, S11, of a sample placed in a SC-RWG sample holder are studied to quantitively define when a sample must be offset from the SC-end. The impact of the sample holder is also studied from a measurement …

Go to article

Multiphysics Modeling Of Melt Pool Dynamics And Powder Bed Stability In Lpbf Of Inconel 718 For A Circular Cavity, Nayan Pundhir, Oluwapelumi O. Adejumo, Kumbla Chandrashekhara, Joseph W. Newkirk, Heath Misak, Cesar Ortiz Rios Jan 2026

Multiphysics Modeling Of Melt Pool Dynamics And Powder Bed Stability In Lpbf Of Inconel 718 For A Circular Cavity, Nayan Pundhir, Oluwapelumi O. Adejumo, Kumbla Chandrashekhara, Joseph W. Newkirk, Heath Misak, Cesar Ortiz Rios

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Laser powder bed fusion (LPBF) is a metal additive manufacturing process in which a concentrated laser beam selectively melts successive powder layers to fabricate components. Final part quality is highly sensitive to process parameters such as hatch spacing, powder bed density, laser power, and scanning speed. In this study, a computational fluid dynamics model employing discrete element method has been developed in FLOW-3D to simulate LPBF of Inconel 718. The modeled powder bed incorporates particle size distribution data obtained from scanning electron microscopy and is evaluated for single-layer, single-track deposition over a circular cavity. The model captured melt pool dynamics …

Go to article

Atomized Oxidative Polymerization As A 3d Printing Platform For Binder-Free, Bulk Conductive Polymer Architectures, Tazdik Patwary Plateau, Hiep Pham, Jonghyun Park Jan 2026

Atomized Oxidative Polymerization As A 3d Printing Platform For Binder-Free, Bulk Conductive Polymer Architectures, Tazdik Patwary Plateau, Hiep Pham, Jonghyun Park

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Translating the ultrahigh intrinsic conductivity of conjugated polymers into bulk 3D architectures remains a formidable challenge due to the fundamental dichotomy between rheological printability and electronic purity. Existing strategies necessitate a compromise: solution-processing requires insulating binders that degrade charge transport, while binder-free vapor-phase polymerization (VPP) is kinetically confined to surface-limited thin films by diffusion constraints. Here, we introduce atomized oxidative polymerization (AOP), a manufacturing paradigm that overcomes these kinetic barriers via active, layer-by-layer monomer atomization. This approach ensures stoichiometric reaction conditions throughout the printed volume, driving a structural transition toward highly conductive quinoid-dominant chains with enhanced π-π stacking. The resulting …

Go to article

Design, Construction, And Initial Testing Of A Oxy-Acetylene Testing Facility, Blake Bowman, Davide Viganò Jan 2026

Design, Construction, And Initial Testing Of A Oxy-Acetylene Testing Facility, Blake Bowman, Davide Viganò

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Thermal Protection Systems (TPS) are critical for atmospheric re-entry and hypersonic flight vehicles, yet ground-based evaluation of TPS materials remains challenging due to the cost, complexity, and limited availability of large arc-jet and inductively coupled plasma (ICP) facilities. Oxy-acetylene testing provides a low-cost and accessible alternative for preliminary material screening, sensor development, and fundamental studies of material response under high heat-flux conditions. This paper presents the design, construction, and initial validation of the High-Enthalpy Acetylene Testing (HEAT) facility at Missouri University of Science and Technology. The facility incorporates a modular experimental architecture, independently controlled oxygen and acetylene mass-flow systems, and …

Go to article

A Large Thermal Vacuum (Tvac) Facility To Simulate Cryogenic Space Environments, Emmanuel Kofi Asuako Wie-Addo, Lucas Alexander Scott, Frank Daoru Han Jan 2026

A Large Thermal Vacuum (Tvac) Facility To Simulate Cryogenic Space Environments, Emmanuel Kofi Asuako Wie-Addo, Lucas Alexander Scott, Frank Daoru Han

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This work reports the upgrade of a 10-ft (3.0 m) long x 6-ft (1.8 m) diameter vacuum facility as part of ongoing efforts to address some of the technology gaps in NASA's Moon to Mars mission architecture, which include systems to survive and operate through extended periods in extreme environments. Consequently, a removable thermal shroud has been fabricated and installed to facilitate the simulation of extreme cryogenic conditions. The cooling rates of the shroud and a surrogate test article, using liquid nitrogen as the coolant are analyzed and documented under varying vacuum environments during cryogenic testing. The attainable vacuum level …

Go to article

Upconversion Photoluminescence In Wsse Alloy Monolayer Under Uniaxial Tensile Strain, Shrawan Roy, Jie Gao, Xiaodong Yang Jan 2026

Upconversion Photoluminescence In Wsse Alloy Monolayer Under Uniaxial Tensile Strain, Shrawan Roy, Jie Gao, Xiaodong Yang

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The optical responses of monolayer transition metal dichalcogenides (1L-TMDs) can be tuned effectively by using mechanical strain. In this work, the tuning of upconversion photoluminescence (UPL) emission in 1L-WSSe alloy by applying uniaxial tensile strain is investigated. When the uniaxial tensile strain is changed from 0 % to 1.02 %, the peak position of UPL emission has a redshift of around 25.6 nm, and the UPL intensity goes up with an exponential function of the applied strain as the upconversion energy difference is varied from −197 meV to −131 meV. The sublinear power dependence for UPL emission in 1L-WSSe alloy …

Go to article

A Combined Tomographic Particle Image Velocimetry And Numerical Simulation Approach For Supersonic Wind Tunnel Calibration, Joshua Gary, Josiah Mcdermott, Kyle Worden, Serhat Hosder, Davide Viganò Jan 2026

A Combined Tomographic Particle Image Velocimetry And Numerical Simulation Approach For Supersonic Wind Tunnel Calibration, Joshua Gary, Josiah Mcdermott, Kyle Worden, Serhat Hosder, Davide Viganò

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Supersonic wind tunnels remain essential tools for high-speed aerodynamics research, yet the characterization of their free-stream conditions remains technically challenging and lacks standardized criteria for defining "good" flow quality. While traditional calibration methods rely on intrusive probes, recent advances in optical diagnostics offer new opportunities for non-intrusive characterization. In this work, we demonstrate a novel use of Tomographic Particle Image Velocimetry (Tomo-PIV), combined with numerical simulations, as a methodology for supersonic wind tunnel calibration. The approach is applied to the recently upgraded Missouri S&T Supersonic Wind Tunnel, where Tomo-PIV measurements reveal uniform flow with low angularity and low turbulent noise …

Go to article

Optimal Takeoff Trajectory Prediction Of Electric Drones Based On A Fully Automated Optimal Experimental Design Method, Jiachen Wang, Dheeraj Paramkusham, Xiaosong Du Jan 2026

Optimal Takeoff Trajectory Prediction Of Electric Drones Based On A Fully Automated Optimal Experimental Design Method, Jiachen Wang, Dheeraj Paramkusham, Xiaosong Du

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Electric vertical takeoff and landing (eVTOL) aircraft is attracting great interest as a viable solution to promote urban aerial mobility with promising flexibility as well as emission reductions. However, the low specific energy of the current battery is still a strong constraint on the range and endurance of eVTOL flights, especially considering the significant power demands during the takeoff process. Engineering design optimization permits promising solutions for the minimum takeoff energy consumption but can be computationally intensive due to iteratively evaluating simulation models. Surrogate-based design optimization is efficient but still relies on optimization iterations which prohibit real-time decision-making. To fill …

Go to article

Tomo-Piv Study Of Baseline Flow Structures Behind A Strut Injector, Josiah Mcdermott, Connor Bell, Davide Viganò Jan 2026

Tomo-Piv Study Of Baseline Flow Structures Behind A Strut Injector, Josiah Mcdermott, Connor Bell, Davide Viganò

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Stabilizing combustion in scramjet engines is a formidable challenge due to the small-time scales afforded for air-fuel mixing. Numerous studies in this area have demonstrated the potential of strut-style platforms for fuel injection and mixing enhancement, which remains an active area of research. In the Aerodynamics Research Laboratory at Missouri S&T, a strut-style injector system has recently been installed. In this study, we characterize the baseline flow structures behind this platform absent fuel injection. The wake generated by a strut itself has an appreciable impact on the resulting air-fuel mixing, which motivates its characterization. In future studies, this characterization will …

Go to article

Impact Of Dispersed Crystalline Domains On Lithium-Ion Conductivity In Amorphous Li2.99ba0.005ocl Electrolytes, Emmanuel Olugbade, Junquan Ou, Leon Shaw, Jonghyun Park Jan 2026

Impact Of Dispersed Crystalline Domains On Lithium-Ion Conductivity In Amorphous Li2.99ba0.005ocl Electrolytes, Emmanuel Olugbade, Junquan Ou, Leon Shaw, Jonghyun Park

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Solid-state electrolytes promise safer, high-energy batteries, yet ionic transport is limited by structural heterogeneity and interfacial resistance. We combine hydrothermal synthesis and molecular dynamics (MD) to determine how dispersed crystallinity and interfacial orientation govern lithium-ion conduction in barium-doped anti-perovskite Li2.99Ba0.005OCl. Structural and thermal analyses identify a largely amorphous matrix with embedded nano crystallites, and MD captures the same short-range order and dispersion seen experimentally. Electrochemical impedance spectroscopy separates high amorphous-phase conductivity from a pellet-scale response dominated by interfacial limitations, consistent with direct-current polarization. Cyclic voltammetry indicates a broad electrochemical stability window. We quantify transport in crystalline …

Go to article

Physics-Constrained Generative Adversarial Networks For Dimensionality Reduction In Optimization, Samuel Sisk, Xiaosong Du Jan 2026

Physics-Constrained Generative Adversarial Networks For Dimensionality Reduction In Optimization, Samuel Sisk, Xiaosong Du

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Electric vertical takeoff and landing (eVTOL) aircraft make a unique form of urban air mobility due to their low noise, zero emission, and precision control. To maximize efficiency, high-fidelity simulation-based multidisciplinary design optimization discovers the optimal balance among subsystems within an eVTOL. However, conventional multidisciplinary design optimization is computationally intensive due to excessive high-fidelity model evaluations. Moreover, complex nonlinear constraints deteriorate optimization efficiency and convergence. While surrogate models enable efficient design optimization, surrogate modeling suffers in large-scale applications and surrogate-based optimization still has to deal with nonlinear constraints. To address these challenges, the authors' previous work proposed physics-constrained generative adversarial …

Go to article

Distributed Vibration Sensing For Identification Of Loose Connectors In Coaxial Data Transmission Lines, Saidanvar Esanjonovich Valiev, Anthony C. Okafor, Jeremiah J. Rittenhouse, Jie Huang, Daniel S. Stutts Jan 2026

Distributed Vibration Sensing For Identification Of Loose Connectors In Coaxial Data Transmission Lines, Saidanvar Esanjonovich Valiev, Anthony C. Okafor, Jeremiah J. Rittenhouse, Jie Huang, Daniel S. Stutts

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This study investigates the effect of vibration-induced loose connections on signal reflection (S11) for loose connection identification in aerospace coaxial cables using distributed sensing approach, which is effective in filtering the noise and identifying minor discontinuities. In this approach, a sliding gated window is applied to S11 signal, a fast Fourier transform is performed over the gated windows, cross-correlation is computed between the baseline and vibration-affected signals, and the standard deviation is mapped along the cable length. Sinewave signals from 9 kHz to 5 GHz were swept through cables with vibrating connectors under three conditions: fully tightened, loosened by 180°, …

Go to article

Supersonic Wind Tunnel Free Stream Turbulence Characterization Using 2-Point Focused Laser Differential Interferometry, Joseph Villarreal, Joshua Gary, Davide Vigano Jan 2026

Supersonic Wind Tunnel Free Stream Turbulence Characterization Using 2-Point Focused Laser Differential Interferometry, Joseph Villarreal, Joshua Gary, Davide Vigano

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Non-intrusive laser-based diagnostics, such as Two-Point Focused Laser Differential Interfer-ometry (2-FLDI), play a crucial role in modern aerodynamic research by enabling simultaneous measurements of density and velocity in compressible flows. A 2-FLDI system has been developed and implemented for the Missouri S&T Supersonic Wind Tunnel to characterize free stream turbulence fluctuations and free stream convective velocity. Design choices that enabled the 2-FLDI to overcome low turbulence to measure free stream velocity are detailed. The free stream velocity measurements are validated against previous particle image velocimetry data, showing good agreement. Analysis of normalized velocities and density-based turbulence intensities found that the …

Go to article

2-Point Focused Laser Differential Interferometry Measurements Of A Parallel Jet In Supersonic Flow, Joshua Gary, Joseph Villarreal, Davide Vigano Jan 2026

2-Point Focused Laser Differential Interferometry Measurements Of A Parallel Jet In Supersonic Flow, Joshua Gary, Joseph Villarreal, Davide Vigano

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Turbulence in compressible flows plays a central role in applications such as air-fuel mixing in supersonic combustors and is significantly more complex than incompressible turbulence due to the presence of fluctuating thermodynamic quantities. As such, models like the Strong Reynolds Analogy (SRA) are used to relate these quantities. However, SRA validity has been examined primarily in boundary-layer flows. In this work, a newly developed Two-Point Focused Laser Differential Interferometry (2-FLDI) system is implemented in a two-dimensional parallel supersonic jet. The diagnostic is described in detail, including optical alignment procedures, calibration methods, and data analysis techniques. Measurements acquired at multiple streamwise …

Go to article

Corrigendum To “3d Semi-Analytical Thermo-Elasto-Plastic Model For Additive Manufacturing”(Additive Manufacturing, (2026), 127, C, (105308), (S2214860426002344), 10.1016/J.Addma.2026.105308), Tao Liu, Ming C. Leu, Edward C. Kinzel, Chinedum Okwudire Jan 2026

Corrigendum To “3d Semi-Analytical Thermo-Elasto-Plastic Model For Additive Manufacturing”(Additive Manufacturing, (2026), 127, C, (105308), (S2214860426002344), 10.1016/J.Addma.2026.105308), Tao Liu, Ming C. Leu, Edward C. Kinzel, Chinedum Okwudire

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The author regret about the correction in the Equation B(1) in original article. The corrected version of the Equation B(1) is given below,(1.1)∂uxxx,ξ∂x=116πμ1−ν4ν−1x−ξxR3−3x−ξx3R5−8ν−5x−ξxR13+34ν−3x−ξx3R15−18x−ξxzξzR15+30x−ξx3zξzR17−12ν−12ν−1x−ξxR1R1+z+ξz2+4ν−12ν−1x−ξx3R13R1+z+ξz2+8ν−12ν−1x−ξx3R12R1+z+ξz3 The authors would like to apologise for any inconvenience caused. DOI of original article: < 10.1016/j.addma.2026.105308>

Go to article

Assessing The Criticality Of Construction Trades: Skilled Labor Shortages And Their Cost And Schedule Impacts, Tamima Elbashbishy, Islam H. El-Adaway Jan 2026

Assessing The Criticality Of Construction Trades: Skilled Labor Shortages And Their Cost And Schedule Impacts, Tamima Elbashbishy, Islam H. El-Adaway

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Skilled labor shortages are a pressing issue in the construction industry. Existing research has primarily focused on the effects of labor shortages at the project or industry level, but there is limited exploration of how these shortages vary across specific trades and their distinct impacts on project outcomes. Evidence indicates that labor shortages vary significantly among trades. This paper addresses this knowledge gap through quantitatively assessing the criticality of key construction trades based on the (1) extent of skilled labor shortages currently witnessed in each trade, (2) impact of these shortages on cost and schedule performance, and (3) degree of …

Go to article

Environmental Engineers Develop Solutions To Problems Of Planetary Health: The Legacy Of Professor P. Aarne Vesilind, Daniel B. Oerther Jan 2026

Environmental Engineers Develop Solutions To Problems Of Planetary Health: The Legacy Of Professor P. Aarne Vesilind, Daniel B. Oerther

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The principal ethical obligation of the engineering profession, to "hold paramount the health, safety, and welfare of the public," has been challenged for decades. Professor P. Aarne Vesilind identified two primary deficiencies: an anthropocentric bias that values nature only instrumentally and the use of non-mandatory, aspirational language for environmental protection, which resulted in the exclusion of enforceable environmental canons. This paper argues that two recent developments provide a comprehensive response to Vesilind's recommendations for engineering ethics. First, the United States Bureau of Labor Statistics has redefined environmental engineering as "developing solutions to problems of planetary health." Second, Oerther proposed a …

Go to article

Instrument Response Functions Of The Antarctic Demonstrator For The Advanced Particle-Astrophysics Telescope (Adapt), Wenlei Chen, James H. Buckley, Marion Sudvarg Dec 2025

Instrument Response Functions Of The Antarctic Demonstrator For The Advanced Particle-Astrophysics Telescope (Adapt), Wenlei Chen, James H. Buckley, Marion Sudvarg

Computer Science Faculty Research & Creative Works

The Antarctic Demonstrator for the Advanced Particle-astrophysics Telescope (ADAPT) gamma-ray/cosmic-ray instrument serves as a precursor to the proposed APT mission. The APT mission is designed to improve sensitivity in the MeV-TeV gamma-ray range by an order of magnitude compared to current missions and is optimized for dark-matter and multimessenger research. The ADAPT instrument uses scintillating fibers for particle tracking and sodium-doped cesium iodide (CsI:Na) tiles read out with wavelength shifting (WLS) fibers for imaging, with solid-state silicon photomultipliers (SiPMs) for calorimetry. It includes four layers of imaging calorimeter detectors and scintillating-fiber trackers, functioning both as a Compton and Pair telescope …

Go to article

Real-Time Likelihood Map Generation To Localize Short-Duration Gamma-Ray Transients, Jeremy Buhler, Marion Sudvarg Dec 2025

Real-Time Likelihood Map Generation To Localize Short-Duration Gamma-Ray Transients, Jeremy Buhler, Marion Sudvarg

Computer Science Faculty Research & Creative Works

High-energy transient astrophysical phenomena, such as supernovae and binary neutron star mergers, benefit from a multi-wavelength investigation in which a space- or balloon-based omnidirectional telescope detects and localizes early high-energy emissions (such as a gamma-ray burst), then alerts a narrow-field follow-up instrument to observe the source. The high-energy telescope must provide a map that assigns to each sky location a likelihood that the source appears there. To issue prompt alerts despite limits on communication bandwidth and latency, it is desirable to compute this map aboard the high-energy telescope, but doing so requires rapid response while computing under stringent size, weight, …

Go to article

Polyminhash: Efficient Area-Based Minhashing Of Polygons For Approximate Nearest Neighbor Search, Alima Subedi, Sankalpa Pokharel, Satish Puri Dec 2025

Polyminhash: Efficient Area-Based Minhashing Of Polygons For Approximate Nearest Neighbor Search, Alima Subedi, Sankalpa Pokharel, Satish Puri

Computer Science Faculty Research & Creative Works

Similarity searches are a critical task in data mining. As datasets grow larger, exact nearest neighbor searches quickly become unfeasible, leading to the adoption of approximate nearest neighbor (ANN) searches. ANN has been studied for text data, images, and trajectories. However, there has been little effort to develop ANN systems for polygons in spatial database systems and geographic information systems. We present PolyMinHash, a system for approximate polygon similarity search that adapts MinHashing into a novel 2D polygon-hashing scheme to generate short, similarity-preserving signatures of input polygons. Minhash is generated by counting the number of randomly sampled points needed before …

Go to article

Accessing Cation And Anion Redox In Mixed-Valent One-Dimensional Iron-Chalcogenides, Na1.5fe1s2–Xsex(X = 0, 1, And 2), For Na-Ion Batteries, Santhoshkumar Sundaramoorthy, Milad Aghayi-Anaraki, Sutapa Bhattacharya, Amitava Choudhury Dec 2025

Accessing Cation And Anion Redox In Mixed-Valent One-Dimensional Iron-Chalcogenides, Na1.5fe1s2–Xsex(X = 0, 1, And 2), For Na-Ion Batteries, Santhoshkumar Sundaramoorthy, Milad Aghayi-Anaraki, Sutapa Bhattacharya, Amitava Choudhury

Chemistry Faculty Research & Creative Works

Sodium-ion batteries (NIBs) have attracted considerable attention as a cost-effective and sustainable alternative to lithium-ion batteries (LIBs), owing to the abundance and low cost of sodium resources. Here, we investigate previously reported mixed-valent (Fe3+/2+) one-dimensional (1D) iron chalcogenides: Na1.5FeS2, its selenide analogue Na1.5FeSe2, and newly developed solid solution Na1.5FeSSe, focusing on their synthesis, structural characterization, and electrochemical performance in NIBs. While the full Fe2+sulfide version (NaFeS2) of the compound is explored in solid-state cells for its dual cation–anion redox mechanism, we reveal the effect of anion substitution on the electrochemical behavior of Na1.5FeS2–xSex(x = 0, 1, …

Go to article

Tunable Phase-Change Metasurfaces Coupled With Mid-Infrared Molecular Vibrations, Haotian Tang, Liliana Stan, David A. Czaplewski, Xiaodong Yang, Jie Gao Dec 2025

Tunable Phase-Change Metasurfaces Coupled With Mid-Infrared Molecular Vibrations, Haotian Tang, Liliana Stan, David A. Czaplewski, Xiaodong Yang, Jie Gao

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Chiral optical meta surfaces have emerged as a promising platform in coupling with molecular vibrational fingerprints through the enhanced light-matter interaction under different circularly polarized light illumination. This work reports the mode coupling between the mid-infrared phonon vibrations of polymethyl methacrylate (PMMA) molecules, and the thermally tunable chiral meta surfaces based on the phase-change material Ge₂Sb₂Te₅ (GST-225). Phase-change chiral meta surfaces with high circular dichroism (CD) in absorption and tunable plasmonic resonance in the frequency range of 48-56 THz are demonstrated, which covers the phonon vibrational frequency of PMMA molecules at 52 THz. The mode splitting features are observed in …

Go to article

Engineered Multifunctional Drug-Loaded Dendrimer Nanoparticles For Glaucoma: Triple Mechanism Via Antioxidant Activity, Iron Chelation, And Enhanced Ocular Transport, Burhan Ates, Ashish Trital, Vimalin Jeyalatha Mani, Lei Xu, Jonathan Kenlee, Nuran Ercal, Hu Yang Dec 2025

Engineered Multifunctional Drug-Loaded Dendrimer Nanoparticles For Glaucoma: Triple Mechanism Via Antioxidant Activity, Iron Chelation, And Enhanced Ocular Transport, Burhan Ates, Ashish Trital, Vimalin Jeyalatha Mani, Lei Xu, Jonathan Kenlee, Nuran Ercal, Hu Yang

Chemistry Faculty Research & Creative Works

In this study, we developed multifunctional nanoparticles based on polyamidoamine (PAMAM) dendrimers functionalized with caffeic acid (CA) and poly (ethylene glycol) maleimide (PEGM) for the topical delivery of hydrophobic antiglaucoma drugs brimonidine (BM) and betaxolol (BX). The PAMAM-CA and PAMAM-CA-PEGM conjugates exhibited antioxidant and iron-chelating activities in a dose-dependent manner. BM- and BX-loaded dendrimer nanoparticles produced using a multi-inlet vortex mixer showed uniform spherical morphology (∼80 nm by TEM) and hydrated sizes of ∼135-144 nm by DLS. Both nano formulations demonstrated high cytocompatibility with human corneal epithelial cells and were nonirritant in the HET-CAM assay, with PEGM further improving cytocompatibility. …

Go to article

Using Insecticidal Compounds To Elucidate The Potential Role Of Neurotransmitters In Lepidoptera Pupal Ecdysis, Niranjana Krishnan, Cassandra Gorman, Jillian Stewart, Steven Bradbury, Russell Jurenka Dec 2025

Using Insecticidal Compounds To Elucidate The Potential Role Of Neurotransmitters In Lepidoptera Pupal Ecdysis, Niranjana Krishnan, Cassandra Gorman, Jillian Stewart, Steven Bradbury, Russell Jurenka

Biological Sciences Faculty Research & Creative Works

Previously, we reported final-instar lepidopteran larvae exposed to low doses of imidacloprid, clothianidin, and thiamethoxam had arrest in pupal ecdysis, which is a novel adverse outcome for neonicotinoid insecticides. Since neonicotinoids disrupt acetylcholine signaling, we hypothesized that the excitatory neurotransmitter acetylcholine plays a critical role in regulation of pupal ecdysis, likely by modulating the release of peptides from crustacean cardioactive peptide (CCAP) neurons. In this paper, using two lepidopteran species, we undertook studies with five additional nicotinic acetylcholine receptor (nAChR) agonists and three muscarinic acetylcholine receptor (mAChR) agonists to hypothesize the putative nAChR subunits that mediate pupal ecdysis. We also …

Go to article

Wacsaw: An Adaptive, Statistical Method To Classify Movement Into Sleep And Wakefulness States, Austin Vandegriffe, V. A. Samaranayake, Matthew S. Thimgan Dec 2025

Wacsaw: An Adaptive, Statistical Method To Classify Movement Into Sleep And Wakefulness States, Austin Vandegriffe, V. A. Samaranayake, Matthew S. Thimgan

Mathematics and Statistics Faculty Research & Creative Works

Wearable actimeters can improve our understanding of sleep in the natural environments. Current algorithms may produce inaccuracies in specific individuals and circumstances, such as quiet wakefulness. New hardware allows data collection at higher frequencies enabling sophisticated analytical methods. We have developed a novel statistical algorithm, the Wasserstein Algorithm for Classifying Sleep and Wakefulness (WACSAW), to identify behavioral states from recordings of everyday movement. WACSAW employs optimal transport techniques to identify segments with differing activity variability. Functions characterizing the segments' movement distributions were clustered into two groups using a k-nearest neighbors and labeled as sleep or wake based on their proximity …

Go to article

Micro/Nanomechanical Properties Of Top-Seeded Melt Grown Ybco Single Crystals Determined Using Depth Sensing Indentation, Ugur Kolemen, Cafer Mert Yesilkanat, Fikret Yilmaz, Fatih Dogan, Orhan Uzun Dec 2025

Micro/Nanomechanical Properties Of Top-Seeded Melt Grown Ybco Single Crystals Determined Using Depth Sensing Indentation, Ugur Kolemen, Cafer Mert Yesilkanat, Fikret Yilmaz, Fatih Dogan, Orhan Uzun

Materials Science and Engineering Faculty Research & Creative Works

Mechanical properties of the bulk YBa2Cu3O7-x (YBCO) single crystal superconductor, prepared by using the Top Seeded Melt Growth (TSMG) method, were determined. Property measurements were conducted by the nanoindentation method under various loads and the micro indentation method at different temperatures. Hardness (H) and reduced elastic modulus (Er) values were calculated by using the Oliver–Pharr method. According to hf/h max values found from load- displacement curves, there is a sink in behavior around outer rim of the indents that was confirmed by atomic force microscopy (AFM) analysis. Nanoindentation analyses conducted on upper section, middle section and subsection revealed that all …

Go to article

Application Of Natural Language Processing And Machine Learning For Analyzing Mining Accident Reports And Automating The Process Of Root Cause Analysis, Siddhartha Agarwal, Y. P. Chugh, Atul Singh, Vikram Sakinala, Ayan Mukherjee, Balbir Prasad, Cihan Dagli, Yuhao Zou Dec 2025

Application Of Natural Language Processing And Machine Learning For Analyzing Mining Accident Reports And Automating The Process Of Root Cause Analysis, Siddhartha Agarwal, Y. P. Chugh, Atul Singh, Vikram Sakinala, Ayan Mukherjee, Balbir Prasad, Cihan Dagli, Yuhao Zou

Engineering Management and Systems Engineering Faculty Research & Creative Works

Coal mining accidents are a major concern worldwide, necessitating effective safety measures and comprehensive analysis to prevent future accidents. Our proposed solution is the first attempt for Indian mines, inspired by the potential of Natural Language Processing (NLP) that can read and analyze vast repositories of accident records in seconds. In combination with machine learning (ML), NLP algorithms can extract unstructured text by eliminating manual data entry errors, reading poorly scanned reports, and understanding multiple versions of the event and cluster documents based on types that would otherwise take months to collate. In the case of accident records, it can …

Go to article

First Prev Next Last