Digital Commons Network^™

Design, Construction, And Initial Testing Of A Oxy-Acetylene Testing Facility, Blake Bowman, Davide Viganò

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Thermal Protection Systems (TPS) are critical for atmospheric re-entry and hypersonic flight vehicles, yet ground-based evaluation of TPS materials remains challenging due to the cost, complexity, and limited availability of large arc-jet and inductively coupled plasma (ICP) facilities. Oxy-acetylene testing provides a low-cost and accessible alternative for preliminary material screening, sensor development, and fundamental studies of material response under high heat-flux conditions. This paper presents the design, construction, and initial validation of the High-Enthalpy Acetylene Testing (HEAT) facility at Missouri University of Science and Technology. The facility incorporates a modular experimental architecture, independently controlled oxygen and acetylene mass-flow systems, and …

Supersonic Wind Tunnel Free Stream Turbulence Characterization Using 2-Point Focused Laser Differential Interferometry, Joseph Villarreal, Joshua Gary, Davide Vigano

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Non-intrusive laser-based diagnostics, such as Two-Point Focused Laser Differential Interfer-ometry (2-FLDI), play a crucial role in modern aerodynamic research by enabling simultaneous measurements of density and velocity in compressible flows. A 2-FLDI system has been developed and implemented for the Missouri S&T Supersonic Wind Tunnel to characterize free stream turbulence fluctuations and free stream convective velocity. Design choices that enabled the 2-FLDI to overcome low turbulence to measure free stream velocity are detailed. The free stream velocity measurements are validated against previous particle image velocimetry data, showing good agreement. Analysis of normalized velocities and density-based turbulence intensities found that the …

Temperature Compensation In Loop And Patch Fss Strain Sensors: Analysis And Experimental Validation, Swathi Muthyala Ramesh, Kristen M. Donnell

Electrical and Computer Engineering Faculty Research & Creative Works

Frequency selective surfaces (FSSs) are arrays of conductive elements or apertures that exhibit frequency-dependent reflection and transmission properties. Their electromagnetic response is influenced by geometry and environmental conditions, making them attractive for wireless strain-sensing applications. However, temperature variations can produce frequency shifts similar to those caused by strain, reducing measurement accuracy. This work investigates the effects of intrinsic temperature compensation on two common FSS unit cell geometries—loop and patch—through comprehensive simulation analysis. The results show that loop-based cells offer superior thermal stability, while patch-based cells provide greater strain sensitivity, illustrating the trade-off between thermal robustness and mechanical responsiveness. A patch-type …

Large Language Models For Neurology: A Mini Review, Donald C. Wunsch, Daniel B. Hier

Electrical and Computer Engineering Faculty Research & Creative Works

Large language models have the potential to transform neurology by augmenting diagnostic reasoning, streamlining documentation, and improving workflow efficiency. This Mini Review surveys emerging applications of large language models in Alzheimer's disease, Parkinson's disease, multiple sclerosis, and epilepsy, with emphasis on ambient documentation, multimodal data integration, and clinical decision support. Key barriers to adoption include bias, privacy, reliability, and regulatory alignment. Looking ahead, neurology-focused language models may develop greater fluency in biomedical ontologies and FHIR standards, improving data interoperability and supporting more seamless collaboration between clinicians and AI systems. Two future developments have the potential to be particularly impactful: (1) …

Evaluation Of Multiple Generative Large Language Models On Neurology Board-Style Questions, Mohammad Almomani, Vijaya Valaparla, James Weatherhead, Xiang Fang, Alok Dabi, Chih Ying Li, Peter Mccaffrey, Dan Hier, Jorge Mario Rodríguez-Fernández

Electrical and Computer Engineering Faculty Research & Creative Works

Objective: To compare the performance of eight large language models (LLMs) with neurology residents on board-style multiple-choice questions across seven subspecialties and two cognitive levels. Methods: In a cross-sectional benchmarking study, we evaluated Bard, Claude, Gemini v1, Gemini 2.5, ChatGPT-3.5, ChatGPT-4, ChatGPT-4o, and ChatGPT-5 using 107 text-only items spanning movement disorders, vascular neurology, neuroanatomy, neuroimmunology, epilepsy, neuromuscular disease, and neuro-infectious disease. Items were labeled as lower- or higher-order per Bloom's taxonomy by two neurologists. Models answered each item in a fresh session and reported confidence and Bloom classification. Residents completed the same set under exam-like conditions. Outcomes included overall and …

Safety Aware Continual Reinforcement Learning-Based Output Tracking Control Of Nonlinear Continuous-Time Systems, Irfan Ganie, Sarangapani Jagannathan

Electrical and Computer Engineering Faculty Research & Creative Works

An output feedback (OF)-based control scheme utilizing both a scalable multilayer neural network (MNN) observer and actor–critic MNN via integral reinforcement learning (IRL)/adaptive dynamics programming (ADP) approach for a class of nonlinear systems with output constraints is introduced. The proposed observer, critic, and actor MNN weight updates are derived using a singular value decomposition (SVD) of MNN activation function gradient along with output error, Bellman and control input errors, respectively. Next, the approach incorporates continual learning (CL), utilizing a penalty function in the weight update laws for both actor–critic MNNs to consolidate knowledge from previous tasks and enhance learning in …

Multi-Parameter Optimization And Adaptive Temperature Compensation For Fbg Strain Sensors In Wide-Temperature-Range Aerospace Applications, Ruling Zhou, Jiacheng Yu, Yutang Dai, Jianguan Tang, Minghong Yang, Farhan Mumtaz

Electrical and Computer Engineering Faculty Research & Creative Works

Accurate strain measurement in cryogenic fuel pipelines is crucial for ensuring the structural integrity and reliability of rocket engine systems operating under extreme thermal conditions. Fiber Bragg grating (FBG) sensors show significant potential for such applications; however, their inherent temperature-strain cross-sensitivity limits performance over wide temperature ranges. This research presents an enhanced compensation strategy combining multi-parameter optimization with temperature-zone-specific adaptation to improve the accuracy and stability of FBG-based strain sensing in harsh aerospace environments. Four special steel substrate materials including S03, S06, S07, and 1Cr18Ni9Ti, were evaluated using strain transfer theory and thermo-mechanical coupling simulations. Genetic algorithms optimized key design …

Safe Optimal Control Framework For Cooperative Manipulation Of Objects In Human–Robot Teams, Irfan Ganie, Sarangapani Jagannathan

Electrical and Computer Engineering Faculty Research & Creative Works

This article introduces a distributed deep neural network (NN)-based adaptive control framework for cooperative object manipulation in human–robot teams with unknown agent dynamics by using three distinct multilayer NN observers (MNNOs). The first observer, termed the reference point estimator, enables each robotic agent to estimate the object's reference center using consensus-based learning, even without direct access to global reference trajectories. The second observer, referred to as the human force-to-trajectory estimator, uses human-applied forces to infer the intended position, velocity, and acceleration of the object, enabling real-time estimation of human intent. Together, these two observers allow distributed estimation of human-intended motion. …

High-Resolution, Fast-Response Optical Fiber Temperature Sensor With A Large Measurement Range Based On Fiber-Tip Alumina Fabry-Pérot Interferometer, Ruimin Jie, Chen Zhu, Robert Abbott, Michael Davis, Xiong Zhang, Jie Huang

Electrical and Computer Engineering Faculty Research & Creative Works

We present an alumina-tip optical fiber Fabry-Pérot interferometric temperature sensor exhibiting high-temperature performance, rapid response, and high resolution. Fabricated by fusion splicing an alumina micro disk directly to a single-mode fiber, the sensor achieves robust, stable operation without complex fabrication processes or adhesives. Experimental evaluation confirms a measurement range extending to 1000°C, with sensitivity of 28.66 pm/°C, a resolution of 0.042°C, and a rapid response time of approximately 13 ms. Compared to state-of-the-art optical fiber FPI sensors, our alumina-tip sensor offers superior overall performance, effectively addressing critical demands for high-resolution, fast-response temperature measurement in extreme environments including aerospace, structural monitoring, …

Embeddable Optical Fiber Sensor For Simultaneous Strain And Temperature Monitoring, Amardeep Kaur, Sudharshan Anandan, Steve Eugene Watkins, Yinan Zhang, Kumbla Chandrashekhara, Hai Xiao

Electrical and Computer Engineering Faculty Research & Creative Works

We present an embeddable hybrid optical fiber sensor based on a cascaded extrinsic Fabry–Pérot interferometer (EFPI) and intrinsic Fabry–Pérot interferometer (IFPI) for simultaneous strain and temperature monitoring in high-performance composite materials. The sensor is fabricated using femtosecond laser micromachining and is embedded within bismaleimide composite laminates manufactured via an out-of-autoclave process. Experimental results demonstrate linear and decoupled responses to strain and temperature, with the EFPI showing minimal temperature sensitivity (1.7 pm/°C) and the IFPI exhibiting high temperature sensitivity (16.1 pm/°C). Strain sensitivities for both components were consistent at 0.6pm/με in embedded conditions. The sensor maintained structural integrity and stable spectral …

Self-Calibrating Uav Navigation: Reinforcement Learning Approaches For Horizontal Trajectory Estimation, Shirin Nasr-Esfahani, S. Jagannathan

Electrical and Computer Engineering Faculty Research & Creative Works

Accurate unmanned aerial vehicle (UAV) trajectory estimation is essential for autonomous navigation, particularly in GPS-denied environments. Visualodometry and simultaneous localization and mapping (SLAM) approaches require precise camera intrinsic parameters, which are typically obtained through predefined or offline calibration. Instead, in this work, we propose a reinforcement learning (RL)-based self-calibration framework that estimates camera intrinsic parameters directly from monocular video sequences, without requiring prior knowledge of the camera, environment, or calibration targets. This intrinsic parameter estimation is then leveraged to achieve robust UAV trajectory estimation using only video data. We formulate the problem as a sequential decision-making task, where an RL …

Integrating Optical And Radiofrequency Interferometry For Enhanced Phase Sensing, Ruimin Jie, Zhaopeng Zhang, Chen Zhu, Jie Huang

Electrical and Computer Engineering Faculty Research & Creative Works

Interferometry is a crucial investigative technique used across diverse fields to achieve high-precision measurements. It works by analyzing the phase difference between two interfering waves, which results from variations in optical path lengths within an interferometer. We introduce a novel method for directly measuring changes in the phase difference within an optical interferometer, importantly, with the added advantage of a controllable enhancement factor. This approach is achieved through a two-step process: first, the optical phase difference is encoded into a sub-GHz radiofrequency (RF) signal using microwave-photonic manipulation; then, RF interferometry-assisted phase amplification is implemented at the destructive interference point. In …

Online Lifelong Optimal Adaptive Control Of Partially Uncertain Strict Feedback Discrete-Time Systems With Application To Quadrotor Uavs, Maxwell Geiger, Sarangapani Jagannathan

Electrical and Computer Engineering Faculty Research & Creative Works

This article considers the infinite time horizon optimal adaptive tracking control of partially uncertain strict feedback discrete-time (DT) systems with application to quadrotor uncrewed aerial vehicles (UAVs). First, the strict feedback DT system is transformed into an equivalent affine nonlinear DT system in terms of the tracking error dynamics. The optimal adaptive tracking control problem is solved using an augmented system approach, where a horizon of future bounded reference trajectory points is used in the augmented state, when compared to using a single point. It is assumed that the internal dynamics of the strict feedback system are unknown, but the …

New Metrics For Disambiguating Feature Overlap And Catastrophic Forgetting In Incremental Learning Contexts, Niklas M. Melton, Leonardo Enzo Brito Da Silva, Donald C. Wunsch

Electrical and Computer Engineering Faculty Research & Creative Works

Catastrophic forgetting remains a central challenge in lifelong learning, where newly acquired knowledge interferes with previously learned tasks, degrading performance over time. Mitigation strategies such as rehearsal and regularization have been proposed, but both introduce limitations, either by retaining old data or by constraining model updates in ways that may impair learning. Complicating matters, recent findings show that feature-space overlap between tasks can produce similar performance drops even in models that memorize data, making it difficult to distinguish true forgetting from representational interference. Current accuracy-based metrics fail to disentangle these effects, undermining diagnostic clarity. In this work, we introduce the …

Rf-Attennet: A Hybrid Attention-Enhanced Network For Mixed Signal Classification In Uav Swarm Detection, Prajoy Podder, Mohammad Atikur Rahman, Maciej Zawodniok, Sanjay Madria

Electrical and Computer Engineering Faculty Research & Creative Works

The continuous increase of UAVs, particularly in swarms, creates significant challenges for security and airspace regulation. Traditional RF fingerprinting methods struggle to detect and classify UAV swarms due to overlapping signals and interference. This study introduces RF-AttenNet, a hybrid deep learning model designed to classify mixed UAV signals by analyzing composite RF spectrograms. RF-AttenNet uses dual attention mechanisms, channel and spatial attention to focus on critical spectral features, enabling the model to effectively separate and identify overlapping UAV signals. We have developed custom composite UAV datasets that simulate real-world swarm interference, incorporating both single and mixed UAV classes. RF-AttenNet achieves …

Fixed-Time Consensus Tracking For Nonlinear Multi-Agent Systems Under Aperiodically Intermittent Control, Lei Xue, Tong Wu, Wenwen Jia, Donald C. Wunsch

Electrical and Computer Engineering Faculty Research & Creative Works

This article explores the problem of fixed-time consensus tracking (FT-CT) for nonlinear multi-agent systems utilizing the a periodically intermittent control (AIC) strategy. In contrast to existing control algorithms, the proposed algorithm utilizes the AIC strategy instead of the conventional continuous-time control strategy, effectively reducing the consumption of communication resources. Moreover, the problem of intermittent FT-CT is well handled by proposing the average control rate of the AIC strategy. Two theorems based on the cases of directed and undirected graphs are proposed, respectively. Finally, the validity of these results is confirmed through numerical simulations on a general nonlinear system and a …

Effect Of Process Parameters On Thermal Response Of An Oxy-Fuel Burner/Injector Panel In An Electric Arc Furnace Via Fiber Optic Sensors, Mobashir Ahmed, Rony Kumer Saha, Koustav Dey, Todd Sander, Jie Huang, Ronald J. O'Malley

Electrical and Computer Engineering Faculty Research & Creative Works

Modern oxy-fuel burner/injectors in electric arc furnaces (EAFs) play a critical role in scrap melting, liquid steel refining, and slag foaming. However, varying operational modes, combined with dynamic process conditions, such as arcing and slag behavior, can expose the injector panel surface to intense thermal conditions that can compromise efficiency and safety. Conventional monitoring techniques, including cooling water temperature measurements and thermocouples, fail to capture localized thermal anomalies due to their limited spatial resolution and susceptibility to electromagnetic interference. In this study, four high-resolution Rayleigh backscattering-based fiber optic sensors, interrogated via optical frequency domain reflectometry, were embedded in top and …

Honey-Cnt Memristive Artificial Synaptic Device For Sustainable Neuromorphic Computing System, Md Mehedi Hasan Tanim, Zoe Templin, Harshvardhan Uppaluru, Jinhui Wang, Kuan Yew Cheong, Feng Zhao

Electrical and Computer Engineering Faculty Research & Creative Works

Brain-inspired neuromorphic computing systems require hardware components analogous to biological neurons and synapses. Honey based natural organic memristor has demonstrated promising nonvolatile memristive behaviors, with the advantages of sustainability, environmentally friendliness, and low-cost manufacturing. In this study, carbon nanotubes (CNTs) are added in honey to fabricate honey-CNT memristive artificial synaptic devices. Honey-CNT film is characterized by micro-Raman spectroscopy and the distribution of CNT bundles embedded in the honey-CNT composite layer by cross-sectional scanning electron microscopy for the first time. Critical synaptic functions of the honey-CNT memristor, including spike-rate-dependent plasticity, spike voltage dependent plasticity, learn-forget-relearn, and supralinear spatial summation are revealed, …

Resolving Stiffness Trade-Offs In Simultaneous Pressure And Vibration Sensing Using A Corrugated-Tube Fiber-Optic Sensor, Yizheng Chen, Yan Tang, Jie Huang, Qi Zhang, Biyao Shi, Zewei Wu

Electrical and Computer Engineering Faculty Research & Creative Works

This article proposes and experimentally demonstrates a corrugated-tube-based fiber-optic sensor capable of measuring pressure, vibration, or both simultaneously. To address the limited sensitivity of conventional diaphragm-based designs, the sensor incorporates an optimized corrugated tube that balances the conflicting stiffness requirements for pressure and vibration measurements. The corrugated tube, acting as a mechanical transducer, is integrated with an extrinsic fiber-optic Fabry–Perot interferometer (EFPI). The EFPI cavity is formed between a reflective surface at the sealed end of the corrugated tube and the cleaved end face of an optical fiber fixed within a mounting assembly. In this configuration, displacement of the corrugated …

Transformer-Customer Relationship Identification Based On Load-Switching Fluctuation Characteristics Considering Same-Feeder-Adjacent-Transformer Condition, Yanan Zhang, Gan Zhou, Yuyuan Liu, Wei Gu, Yanjun Feng, Yujue Wang, Rui Bo

Electrical and Computer Engineering Faculty Research & Creative Works

Accurately identifying the connectivity between transformers and downstream three-phase customers in low-voltage distribution networks is challenging, because voltage curves of different phases and nearby nodes can be weakly distinguishable, especially when adjacent transformers on the same feeder serve geographically close customers with highly similar voltage curves. This paper proposes a novel method based on load-switching fluctuation characteristics recorded by smart meters. By extracting localized current and voltage fluctuations and establishing correlation matching, the method overcomes the limited discriminability using steady-state measurements. The method operates in two stages: first, switching-induced fluctuation characteristics are extracted and matched to cluster customers by the …

Corrections To: Enhancing Measurement Accuracy: The Impact Of Missing Data On Parameter Estimation In Mass-Spring-Damper Systems (Ieee Transactions On Instrumentation And Measurement (2026) 75 (1–12) Doi: 10.1109/Tim.2026.3676091), Michkath Omanda Bouraima, Steven Thompson, Maciej J. Zawodniok

Electrical and Computer Engineering Faculty Research & Creative Works

In the above article [1], a wording ambiguity appears in Proposition 4 regarding the description of the missing at random (MAR) mechanism. The published sentence states that the probability of observing the kth sample depends on the realized measurement value. This wording may be interpreted as dependence on the current unobserved value y[tk], which could suggest a missing not at random (MNAR) mechanism. The intended MAR mechanism is that the observation probability for the kth sample depends only on previously observed measurement information, such as y[tk-1], and not on the current unobserved value y[tk]. Therefore, the corrected wording clarifies that …

Multi-Agent Reinforcement Learning Driven Package Pdn Design Automation, Haran Manoharan, Chulsoon Hwang

Electrical and Computer Engineering Faculty Research & Creative Works

The design of package-level power delivery networks (PDNs) has become increasingly challenging as modern high-performance systems demand higher currents. Existing PDN design flows treat ball map assignment, stackup selection, and power plane routing as separate, largely manual steps, leading to long iteration times and limited scalability. This work proposes a unified and automated package PDN design framework based on multi-agent reinforcement learning (MARL). Each power domain is modeled as an agent, with specialized agents responsible for ball map assignment, routing layer selection, and power plane synthesis. A central controller coordinates agent decisions using a global reward that captures electrical and …

Enhancing Explainable Ai For Medical Imaging: Improved Lime Interpretation With Influence Mapping, Abiha Tahsin Chowdhury, Dhanush Bavisetti, Daniel B. Hier, Rahul Dubey, Tayo Obafemi-Ajayi

Electrical and Computer Engineering Faculty Research & Creative Works

The integration of artificial intelligence (AI) into medical imaging is progressing rapidly. It is essential for these AI tools to be transparent, interpretable, and explainable to gain the trust of clinicians and regulators. Current state-of-the-art explainable AI (XAI) techniques in imaging includes Local Interpretable Model-Agnostic Explanations (LIME), Shapley Additive Explanations (SHAP), and Gradient-weighted Class Activation Mapping (Grad-CAM). Recent studies have shown that LIME often suffers from inconsistency and unreliability which limits their utility in sensitive fields like medical imaging. This paper proposes Influence Map based Explanation (IME), an enhanced variant of the original LIME framework, that aggregates multiple runs to …

Event-Based Predefined-Time Synchronization For Complex Networks With Deception Attacks: An Asynchronously Intermittent Strategy, Lei Xue, Jiong Yu, Haoyu Zhou, Yongbao Wu, Jian Liu, Donald C. Wunsch

Electrical and Computer Engineering Faculty Research & Creative Works

This article studies the practical predefined-time synchronization (PPTS) for complex networks (CNs) under deception attacks based on the asynchronously intermittent event-triggered control (AIE-TC). Notably, AIE-TC effectively integrates the advantages of asynchronously intermittent control (AIC) and event-triggered control, where AIC provides each subsystem node with independent control and rest intervals. Besides, all synchronization errors of the CNs converge to an adjustable neighborhood within the predefined time by designing a bounded time-varying function into the controller. Moreover, this article considers that the transmission network is subjected to stochastic deception attacks modeled by a Markov process, which captures the state-driven dynamic transition characteristics …

Effect Of Sample Properties On Short-Circuited Waveguide Measurements For Materials Characterization, Alexander Hook, Jared Sinkey, Kristen M. Donnell

Electrical and Computer Engineering Faculty Research & Creative Works

Microwave materials characterization measurements can be performed using a number of well-established approaches. One such approach, the filled transmission line approach featuring a short-circuited rectangular waveguide (SC-RWG) sample holder, is known to have sample placement restrictions related to measurement viability. This work focuses on this approach and addresses the measurement restrictions within the context of sample length and dielectric properties. The complex reflection properties, S11, of a sample placed in a SC-RWG sample holder are studied to quantitively define when a sample must be offset from the SC-end. The impact of the sample holder is also studied from a measurement …

Evaluation Of Chromium-Crosslinked Amps-Hpam Copolymer Gels: Effects Of Key Parameters On Gelation Time And Strength, Maryam Sharifi Paroushi, Baojun Bai, Thomas P. Schuman, Yin Zhang, Mingzhen Wei

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Controlling CO₂ channeling in heterogeneous reservoirs remains a major challenge for both enhanced oil recovery (EOR) and secure geological storage. AMPS-HPAM copolymers exhibit high-temperature resistance and brine tolerance compared with conventional HPAM gels, making them well suited for the harsh environments associated with CO₂ injection. Chromium-based crosslinkers (CrAc and CrCl₃) were investigated because sulfonic acid groups in AMPS can coordinate with trivalent chromium ions, enabling dual ionic crosslinking and the formation of a robust gel network. While organic crosslinked AMPS-HPAM gels have been widely studied, the behavior of chromium-crosslinked AMPS-containing systems, particularly their gelation kinetics under …

Effect Of Ionic Strength On Gelation Time And Strength Of Amps-Based Polymer Gels, Maryam Sharifi Paroushi, Xuyang Tian, Baojun Bai, Thomas P. Schuman, Yin Zhang, Mingzhen Wei

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Polymer gel treatment has been widely applied for improving sweep efficiency and controlling excessive water and gas production. Their performance depends on gelation time and final gel strength. In most studies, brine salinity is used to describe the effect of formation water on gel behavior. However, changing salinity also changes ionic strength and ion composition at the same time. Because of this coupling, it is difficult to identify the mechanisms controlling gelation, which has led to inconsistent trends in the literature. Increasing salinity has been reported to either slow or accelerate gelation and to weaken or strengthen gels depending on …

Solubility And Dissolution Mechanism Of Novel Multi-Ester Headgroup Surfactants In Supercritical Co2, Ning Xu, Yan Ling Wang, Baojun Bai, Shi Zhang Cui, Yu Zhang, Wen Jing Shi, Zhao Nian Zhang, Wen Hui Ding, Pei Xu Ma, Zan Gao

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

To address the limited solubility and applicability of conventional hydrocarbon surfactants in supercritical CO₂, a series of multi-ester headgroup surfactants were designed and synthesized by leveraging the CO₂-philic properties of ester groups. The molecular structures were characterized using Fourier transform infrared (FT-IR) spectroscopy and ¹H NMR. A custom-designed laser-based apparatus was developed to quantify surfactant solubility and systematically investigate phase behavior in CO2. Molecular dynamics (MD) simulations were employed to elucidate structure–solubility relationships across multiple scales, including solubility parameters, interaction energies, radial distribution functions (RDFs), and free volume fractions. Results indicate that, at 323.15 K, …

Reflections On Linear B (Part 13): Sign 21 May Derive From The Ancient Egyptian 'Wedjat Eye’ (‘Eye Of Horus’ But Also Associated With Ra), Gerald Leonard Cohen

Arts, Languages and Philosophy Faculty Research & Creative Works

This article suggests that Linear B sign 21 (of unknown origin)

may derive ultimately from the Ancient Egyptian ‘wedjat eye’

(Eye of Horus). A point of special interest here is the possibility

that the pronunciation of Linear B sign 21 (designated as ‘qi’)

derives in abbreviated form from the Proto-Indo-European dual

of ‘eye’ and would therefore be the oldest Greek attestation of

that reconstructed PIE form.

The Impact Of Value Homophily, Rational And Emotional Persuasion On Information Passing Of Social Media Advertisements: A Model Comparison Approach, Gloria Hui Wen Liu, Cecil Eng Huang Chua, Neil Chueh An Lee, Jenny Hua Jen Wu

Business and Information Technology Faculty Research & Creative Works

Increasingly, businesses collaborate with influencers and content creators (the source) to advertise on social media, with social media users being exposed to an environment saturated with unsolicited advertisements. With social contacts remaining the most trusted advertisement sources, users' passing of such advertisements helps their dissemination and creates a specific kind of electronic word of mouth called information passing. Information passing involves users forwarding advertisements about products/services to someone else. Prior studies have found at least three factors influence information passing, including value homophily (similarity with the source as perceived by users), rational appeal (information about how a product can meet …