Digital Commons Network^™

Investigating The Dynamic Rating Method: Effects Of Flood Wave Geometry On Discharge Estimation, Daniel James Read

Masters Theses

Rating curves are a vital tool to convert from observed stage to discharge in streamflow monitoring. Most gaging sites utilize a simple rating curve, which assumes a monotonic relationship between stage and discharge. In most cases, this assumption is valid; however, dynamic effects of flood waves often cause significant error in discharge estimation for mildly sloped streams. The dynamic rating method utilizes a numerical solution of the St. Venant Equations applied to time series stage data to compute discharge. Within this method, there is a flood wave parameter called the flood wave factor. The researchers designed a formal computational model …

Validating A Low-Cost Radio Frequency Characterization Framework For Development-Grade Software-Defined Radios In Short-Duration Cubesat Missions, Thomas Wayne Francois

Masters Theses

Software-defined radios (SDRs) and CubeSat platforms have reduced the cost and complexity of space-based communication systems, enabling broader participation in satellite missions. While low-cost radio hardware is increasingly accessible, the ability to characterize and validate its performance remains constrained by the high cost and limited access to traditional RF test equipment. This disparity creates a challenge for small satellite development teams, which must characterize communication-system technical performance with limited access to laboratory-grade instrumentation.

This thesis presents a low-cost RF characterization framework for assessing key radio-frequency performance metrics using readily available hardware and measurement techniques. The approach integrates frequency translation, SDR-based …

Examination Of Laser Microwelding As A Technique For The Repair Of Steel Castings, Allan John Woldow

Masters Theses

"Metal castings have long been plagued with minor defects caused by various process and design conditions. Commonly, minor defects are not seen until after machining operations have been completed, and by the time they are identified, they cannot be salvaged in a manner that is structurally sound and does not have other detrimental effects on the product. Detrimental effects may include warping from high heat input in traditional welding, warping from reheat treatment, oxidation of machined surfaces, microstructural anomalies, and reduced mechanical properties. Micro laser welding has the potential to provide a solution to these issues by providing a low …

Design For Extrusion-Based Additive Manufacturing: Generation Of Guidelines For Ceramics With Comparison To Thermoplastics, Hollis Hervey Waites

Masters Theses

"Design for Additive Manufacturing (DfAM) has made much progress for polymer material extrusion processes (MEX-P), like Fused Deposition Modeling (FDM), but very little progress for ceramic MEX processes (MEX-C) like Direct Ink Writing (DIW). This thesis leverages MEX-P design guidelines to create an initial set of design guidelines for DIW. FDM and DIW processes and material properties are compared, and the effect of these factors on the differences in rules is discussed. Five design guidelines are identified as applying to all MEX. For three of these, an exact limit for DIW of alumina is studied: minimum corner radius in the …

Specialty Glass Fibers For Optical Applications, Theodore Carver Lewis

Masters Theses

"Fibers were draw from melts of a commercial Na-aluminosilicate for ion-exchange treatments. A process was developed to draw 100-meters of fiber with a diameter of 100±10m. The fibers were sectioned for ion exchange treatments. SEM analysis showed an ion penetration depth of 45um after 4 hours of ion exchange in a 400°C KNO3 salt bath. The pristine and ion-exchanged fibers were characterized by a two-point bend test in room temperature air with controlled relative humidity (RH) and faceplate velocities between 100 and 4000 μm/s to characterize fatigue effects. Pristine fibers tested in air (40% RH) at 4000 μm/s had failure …

Aura-Visionpose: Creating Datasets For Vision-Based Pose Estimation, Mohanad Alameer

Masters Theses

"Spacecraft rendezvous is an integral part of many orbital missions, including active space debris removal (ADR) and in-orbit servicing, assembly, and manufacturing (ISAM). Traditionally, rendezvous missions rely mainly on manual ground-based control to perform rendezvous and docking. While this can be effective on an individual basis, it becomes less practical at scale. Autonomous vision-based methods can reduce reliance on human control, and may improve scalability, response time, and reduce the possibility of human error for both ADR and ISAM. This work lays the necessary groundwork for developing a machine learning (ML) model for autonomous rendezvous by creating a labeled image …

Near-Field Scan Method For Radiated Susceptibility Analysis And The Design And Optimization Of A Miniaturized Spiral Antenna For Ultra-Wideband Applications, Mckennan Edward Starkey

Masters Theses

"The work presented in this thesis consists of two separate topics. The first topic is a new method for the characterization of radiated susceptibility of electronic devices, while the second topic is on antenna design. The first topic proposes an approach to experimentally determine locations within an electronic system that are well coupled to external far-field radiators. This method is performed by using a differential magnetic field probe to sweep across the target device while measuring the total radiated power (TRP) produced by the device in a mode stirred tent. Scan locations where the TRP is larger than the background …

Sources Of Tensions In Ai Adoption For Organ Procurement Organizations, Amaneh Babaee

Masters Theses

"Although medical AI systems have promise, the healthcare system has not fully integrated them for improved organizational operations. Studies have been conducted to identify root causes for this hesitancy without targeting a specific domain in healthcare. This generalization can be enhanced for the nuanced or domain-specific factors that offer practical insights to organizations leader. In this thesis, I focus on the factors and sources of tensions in AI adoption in transplant system, which is highly regulated but encourages innovation. Applying the Extended Technology, Organization, Environment (TOE) framework, 10 interviews were conducted at Organ Procurement Organizations (OPOs).

Although not always technically …

Cervical Ligament Systems In Sauropod Dinosaurs: What Support Is There?, Audrey Rose Williams

Masters Theses

"Sauropod dinosaurs, such as Diplodocus, have been the subject of numerous hypotheses about what ligamentous structures could have lifted and supported their long necks. Because the supportive tissues rarely fossilize, palaeontologists rely on osteological correlates on the bone to infer their nature. Options for supportive cervical ligaments in sauropods are mammal-style nuchal ligaments, avian-style interlaminar elastic ligaments, reptilian-style supraspinal ligaments, or some combination thereof. This study tested for the presence of a mammal-style nuchal ligament via histological and micro-computed tomography of posterior cervical hemispinous processes of Apatosaurus and Diplodocus, in addition to examining gross morphological features of the cervical vertebrae …

Transformer-Based Language Models For Bitcoin Market Prediction And Interpretation, Erich Gozebina

Masters Theses

"In the context of a Master's thesis in applied mathematics, this work investigates compact transformer-based language models as an instrument for Bitcoin-related predictions and decision support. The work connects three topics: the structure of the Bitcoin system and its data, the mathematical and algorithmic foundations of deep autoregressive transformers, and the design of practical training pipelines for financial applications. On this foundation, a reproducible ETL pipeline for Bitcoin data is developed and two forecasting experiments are conducted with the compact language model nanochat. The first experiment approaches the prediction of next-day price movements through autoregressive next-token generation based on structured …

Characterizing A Delay-Programmable Two-Color Femtosecond Light Source For Coherent Control Of Atomic Multi-Photon Ionization Processes, Mason Tanner Toombs

Masters Theses

"In this work a delay-programmable two-color femtosecond laser based on a chirped-seed noncollinear optical parametric amplifier was characterized. This design utilizes a titanium-sapphire crystal oscillator to generate broadband pulses of light spanning approximately 600-1200 nm, with a pulse duration of ~5 fs, repetition rate of 80 MHz, and pulse energy of ~2.5 nJ. An infrared portion of the light, spanning approximately 1020-1060 nm, is split off from the pulse and used to generate a pump beam. By dispersing the remaining seed beam and controlling the relative timing delay between the seed and the pump, tunable frequencies within the seed can …

Optical Fiber Eaf Refactory Lining Temperature Monitoring For Safety And Operating Efficiency, Manoj Kumar Pullagura

Masters Theses

"Electric arc furnace (EAF) sidewalls experience severe thermal, chemical, and mechanical loading, especially near burner and injector regions where refractory wear and water ingress from damaged cooling components pose safety risks. Conventional thermocouples and resistance temperature detectors provide reliable point measurements but lack the spatial resolution needed to capture steep gradients and localized anomalies. This research investigates embedded optical fiber sensors for high-resolution temperature monitoring of EAF refractory safety linings to support early water-leak detection and assessment of refractory thermal behavior. A combined Rayleigh backscattering-based optical frequency domain reflectometry (OFDR) and fiber Bragg grating (FBG) approach was evaluated through laboratory …

The Occurence Of Expansive Clay Soils In Illinois And Their Effects On Shallow Lightly Loaded Foundations, Greg James Gollaher

Masters Theses

"The damage caused to shallow foundations and slabs on grade by the shrink-swell activity of clay soils is well documented across the United States. There are local and national resources available that delineate areas that are problematic and areas that are not. These resources paint Illinois as an undemanding foundation environment. However, our experience differs from this. Our experience tells us that damage related to the shrink-swell activity of clay soils is widespread, and commonly severe causing not only cosmetic damage to structures and hard improvements but also affecting the serviceability and longevity of structures. My goal is to accurately …

Castrip Process Technology: Non-Grain Oriented (Ngo) Si Steels Extension And Carbide-Free Bainitic (Cfb) For Flat Products, Naram Naidu Meesala

Masters Theses

"This research explores the development of advanced steel grades manufactured through Castrip® twin-roll thin strip casting technology, with particular attention to non-grain-oriented electrical Si-Steels (NGOES) and carbide-free bainitic (CFB) steels. The Castrip® process offers a near-net-shape route for producing thin steel strips, which greatly decreases the number of processing stages, lowers energy demand, and reduces carbon dioxide emissions when compared with traditional steel production methods.

In the NGOES part of the study, several industrial Fe–Si steel compositions were cold rolled to final thicknesses ranging from 0.35 mm to 0.15 mm. These materials were then exposed to short-duration continuous annealing at …

Structured Decomposition And Efficient Adaptation For Scientific Data Movement: From Transfer Concurrency To Genomic Data Acquisition, Rasman Mubtasim Swargo

Masters Theses

"The end-to-end performance of scientific data movement is increasingly limited not by raw network capacity but by whichever resource along the path is momentarily slowest, a bottleneck that no single static configuration can track. This thesis argues that the right response is to decompose each problem along the resource or workflow axis where bottlenecks vary, adapt only the genuinely dynamic control variables at runtime, and make that adaptation efficient through utility-guided or offline-learned control rather than expensive online search. The thesis develops this principle through four systems of widening scope. AutoMDT decomposes a transfer by operation, assigning separate concurrency levels …

Moth Assemblages Of Fort Leonard Wood, Missouri, Kimberly Anne Steese

Masters Theses

"Moths (Lepidoptera) are ecologically important insects that function as herbivores, pollinators, prey resources, and indicators of ecosystem integrity. Despite their ecological significance, moth communities in the Missouri Ozarks remain poorly documented, particularly within military-managed landscapes. This thesis examined patterns of moth diversity, assemblage structure, and environmental drivers at Fort Leonard Wood (FLW), Missouri, while also assessing the distribution and genetic diversity of species within the genus Papaipema.

Field surveys were conducted from 2019 through 2021 across prairie, savanna, forest, and restoration habitats at FLW using UV bucket traps, sheet trapping, and targeted larval surveys. Across all sampling efforts, 29,116 individual …

General Approach To Determining The Embodied Energy Of Refractory Products, Jacob A. Kerr

Masters Theses

"Refractories are an important group of engineered materials that are critical for sustaining life in the modern age. These products are key components in many industrial processes, such as the production of steel, cement, glass, aluminum, copper, lead, and many others. It is estimated that 50 million tons of refractory products are produced and used around the world every year. Of this, an estimated 28 million tons of spent refractory is generated after use, much of which ends up in landfills all over the globe. By utilizing embodied energy methodologies, a complete sum of energy inputs can be mapped throughout …

Elevated Temperature Flexure Behavior Of Continuous Carbon Fiber Reinforced Zrb2–Zrsi2 Ultrahigh Temperature Ceramic Matrix Composites, Jacob Stacy, Aaron Ginsparg, Jason Lonergan, Jeremy Watts, Gregory Hilmas

Materials Science and Engineering Faculty Research & Creative Works

Ultrahigh temperature ceramic matrix composites (UHTCMCs) were fabricated from unidirectional prepreg tapes consisting of a matrix of ZrB₂ with 5, 10, and 15 vol.% ZrSi₂ additions and continuous polyacrylonitrile carbon fibers and were densified at 1600°C in a hot press. The relative matrix densities ranged from 88% to 93% with interlayer spacings of ∼72 µm and fiber volume fractions between 30% and 36%. Phenolic resin additions were utilized to react with ZrSi₂ acting as a transient sintering aid to form ZrC and SiC phases. Elastic moduli of the UHTCMCs decreased with increasing temperature during 4-pt flexure testing. …

Quantitative Grain Structure And Texture Analysis Of Hot-Pressed Zrb2 Via 3d Ebsd, Randi Swanson, Michael Chapman, Yue Zhou, Ashley Hilmas, Lisa Rueschhoff, Michael Uchic, William Fahrenholtz, Scott J. Mccormack

Materials Science and Engineering Faculty Research & Creative Works

Understanding and controlling the grain structure of ZrB₂ is critical for optimizing its mechanical and thermal performance in high-temperature applications. Fully dense ZrB₂, densified by hot pressing at 2150˚C and 32 MPa, was analyzed in three dimensions using electron backscattered diffraction, electron and optical microscopy, and mechanical polishing serial sectioning. Grain size followed a gamma distribution, with extreme deviations observed only in the largest 0.1% of grains. Large grains exhibited plate-like morphologies, with the shortest-to-longest axis ratio converging to ∼0.4 as grain volume increased. This work revealed a crystallographically controlled growth mechanism orthogonal to [0001] that is …

Simulated Lunar Gravity Testing Of A Magnetic And Electrostatic System For Beneficiating Lunar Regolith, Blake A. Coffman, Gabriel Porter, Lindsay Manteufel, Mitchell Cottrell, Jeffrey D. Smith, David J. Bayless, William Shonberg, Frank D. Han, Fateme Rezaei, Kirby Runyon

Materials Science and Engineering Faculty Research & Creative Works

We present the design and testing of a lunar regolith beneficiation device that utilizes magnetic and electrostatic separation methods to concentrate desired minerals by removing unwanted material, such as the mineral anorthite, from bulk lunar regolith. The beneficiated materials would have value for downstream in-situ resource utilization (ISRU) processes such as metal extraction, oxygen extraction, and metal oxide additive manufacturing processes. The apparatus uses a dual-strength magnet system with N52 and N42 neodymium magnets to separate particles by magnetic susceptibility. The electrostatic separation system, which acts like a sieve, sorts the regolith simulant by particle size using a single-phase 50% …

Sadqn-Based Residual Energy-Aware Beamforming For Lora-Enabled Rf Energy Harvesting For Disaster-Tolerant Underground Mining Networks, Hilary Kelechi Anabi, Samuel Frimpong, Sanjay Madria

Mining Engineering Faculty Research & Creative Works

The end-to-end efficiency of radio-frequency (RF)-powered wireless communication networks (WPCNs) in post-disaster underground mine environments can be enhanced through adaptive beamforming. The primary challenges in such scenarios include (i) identifying the most energy-constrained nodes, i.e., nodes with the lowest residual energy to prevent the loss of tracking and localization functionality; (ii) avoiding reliance on the computationally intensive channel state information (CSI) acquisition process; and (iii) ensuring long-range RF wireless power transfer (LoRa-RFWPT). To address these issues, this paper introduces an adaptive and safety-aware deep reinforcement learning (DRL) framework for energy beamforming in LoRa-enabled underground disaster networks. Specifically, we develop a …

Overcoming Resolution Vs. Throughput Trade-Offs In Ceramic Material Extrusion Additive Manufacturing Via Viscoelastic Filament Stretching, Abid H. Rafi, David W. Lipke, Jeremy L. Watts, Gregory E. Hilmas, Ming C. Leu

Materials Science and Engineering Faculty Research & Creative Works

Fabricating large, monolithic ceramic parts using material-extrusion additive manufacturing remains challenging due to difficulty maintaining uniform moisture content during printing, which can lead to drying-induced defects such as warping and cracking, especially as part size and print time increase. Fabricated parts have trade-offs among print resolution, high throughput, and structural fidelity. Our study has shown that increasing the ratio of nozzle traverse speed vs. material extrusion speed increases filament stretching in viscoelastic ceramic paste, helping to overcome the trade-offs between resolution and throughput. Using aqueous ZrB2–SiC (70/30 vol.%) as a representative ultra-high temperature ceramic paste, rheological characterisation revealed viscoelastic yield-stress …

Sustmine: A Framework For Integrating Sustainable Development Dimensions Into Strategic Mine Planning, Hussam Altalhi, Kwame Awuah-Offei, Gabriel Nicolosi, Abdullah Al Moinee, Nasib Al Habib

Mining Engineering Faculty Research & Creative Works

Strategic mine planning involves optimizing resource extraction to achieve economic, environmental, and social objectives. However, only a few frameworks offer a unified approach that simultaneously employs systematic indicator selection and weightless trade-off evaluation. This study addresses these issues by proposing a comprehensive framework for integrating sustainability into strategic mine planning, named SustMine. SustMine introduces two key advancements: (1) a rigorous, systematic, criteria-based process for selecting site-specific sustainable development indicators (SDIs), and (2) a weightless evaluation strategy that utilizes Pareto front analysis to construct composite indices. This allows decision-makers to identify non-dominated (optimally balanced) alternatives without relying on arbitrary or subjective …

Emergent Spin Fluctuation And Structural Metastability In Self-Intercalated Cr1+Xte2 Compounds, Clayton Conner, Ali Sarikhani, Theo Volz, Mathew Pollard, Mitchel Vaninger, Xiaoqing He, Steven Kelley, Jacob Cook, Avinash Sah, John Clark, Hunter Lucker, Cheng Zhang, Paul Miceli, Yew San Hor

Physics Faculty Research & Creative Works

Intercalated van der Waals (vdW) magnetic materials host unique magnetic properties due to the interplay of competing interlayer and intralayer exchange couplings, which depend on the intercalant concentration within the van der Waals gaps. Magnetic vdW compound chromium telluride, (Formula presented.), has demonstrated rich magnetic phases at various Cr concentrations, such as the coexistence of ferromagnetic and antiferromagnetic phases in (Formula presented.) (equivalently, (Formula presented.)). The compound is created by intercalating 0.25 Cr atom per unit cell within the van der Waals gaps of (Formula presented.). In this work, we report a notably increased Curie Temperature and an emergent in-plane …

Generation Of Wave Turbulence In Dipolar Gases Driven Across Their Phase Transitions, Georgios A. Bougas, Koushik Mukherjee, Simeon Mistakidis

Physics Faculty Research & Creative Works

Ultracold quantum gases with long-range anisotropic interactions host novel exotic phases of matter, such as super solids, exhibiting both rigid and superfluid characteristics. The impact of this interplay on the out-of-equilibrium dynamics of dipolar gases, and in particular its connection with universal turbulent behavior, remains highly unexplored. Here, upon considering a dipolar Bose-Einstein condensate of dysprosium atoms being dynamically driven across the super solid-superfluid phase transition and vice versa, we unveil the emergence of a robust nonequilibrium quasi-steady state. This state displays self-similar momentum distributions exhibiting algebraic decay at large momenta, with scaling exponents supporting the existence of wave turbulence. …

Upconversion Photoluminescence In Wsse Alloy Monolayer Under Uniaxial Tensile Strain, Shrawan Roy, Jie Gao, Xiaodong Yang

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The optical responses of monolayer transition metal dichalcogenides (1L-TMDs) can be tuned effectively by using mechanical strain. In this work, the tuning of upconversion photoluminescence (UPL) emission in 1L-WSSe alloy by applying uniaxial tensile strain is investigated. When the uniaxial tensile strain is changed from 0 % to 1.02 %, the peak position of UPL emission has a redshift of around 25.6 nm, and the UPL intensity goes up with an exponential function of the applied strain as the upconversion energy difference is varied from −197 meV to −131 meV. The sublinear power dependence for UPL emission in 1L-WSSe alloy …

Physics-Constrained Generative Adversarial Networks For Dimensionality Reduction In Optimization, Samuel Sisk, Xiaosong Du

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Electric vertical takeoff and landing (eVTOL) aircraft make a unique form of urban air mobility due to their low noise, zero emission, and precision control. To maximize efficiency, high-fidelity simulation-based multidisciplinary design optimization discovers the optimal balance among subsystems within an eVTOL. However, conventional multidisciplinary design optimization is computationally intensive due to excessive high-fidelity model evaluations. Moreover, complex nonlinear constraints deteriorate optimization efficiency and convergence. While surrogate models enable efficient design optimization, surrogate modeling suffers in large-scale applications and surrogate-based optimization still has to deal with nonlinear constraints. To address these challenges, the authors' previous work proposed physics-constrained generative adversarial …

Tomo-Piv Study Of Baseline Flow Structures Behind A Strut Injector, Josiah Mcdermott, Connor Bell, Davide Viganò

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Stabilizing combustion in scramjet engines is a formidable challenge due to the small-time scales afforded for air-fuel mixing. Numerous studies in this area have demonstrated the potential of strut-style platforms for fuel injection and mixing enhancement, which remains an active area of research. In the Aerodynamics Research Laboratory at Missouri S&T, a strut-style injector system has recently been installed. In this study, we characterize the baseline flow structures behind this platform absent fuel injection. The wake generated by a strut itself has an appreciable impact on the resulting air-fuel mixing, which motivates its characterization. In future studies, this characterization will …

Optimal Takeoff Trajectory Prediction Of Electric Drones Based On A Fully Automated Optimal Experimental Design Method, Jiachen Wang, Dheeraj Paramkusham, Xiaosong Du

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Electric vertical takeoff and landing (eVTOL) aircraft is attracting great interest as a viable solution to promote urban aerial mobility with promising flexibility as well as emission reductions. However, the low specific energy of the current battery is still a strong constraint on the range and endurance of eVTOL flights, especially considering the significant power demands during the takeoff process. Engineering design optimization permits promising solutions for the minimum takeoff energy consumption but can be computationally intensive due to iteratively evaluating simulation models. Surrogate-based design optimization is efficient but still relies on optimization iterations which prohibit real-time decision-making. To fill …

Impact Of Dispersed Crystalline Domains On Lithium-Ion Conductivity In Amorphous Li2.99ba0.005ocl Electrolytes, Emmanuel Olugbade, Junquan Ou, Leon Shaw, Jonghyun Park

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Solid-state electrolytes promise safer, high-energy batteries, yet ionic transport is limited by structural heterogeneity and interfacial resistance. We combine hydrothermal synthesis and molecular dynamics (MD) to determine how dispersed crystallinity and interfacial orientation govern lithium-ion conduction in barium-doped anti-perovskite Li_2.99Ba_0.005OCl. Structural and thermal analyses identify a largely amorphous matrix with embedded nano crystallites, and MD captures the same short-range order and dispersion seen experimentally. Electrochemical impedance spectroscopy separates high amorphous-phase conductivity from a pellet-scale response dominated by interfacial limitations, consistent with direct-current polarization. Cyclic voltammetry indicates a broad electrochemical stability window. We quantify transport in crystalline …