Digital Commons Network^™

Urban Scale Vehicle-To-Building-To-Grid Integration Leveraging Human Mobility Modeling, Yapan Liu

Dissertations - ALL

In the United States (U.S.), the buildings sector consumes about 76% of electricity use and 40% of all primary energy use and associated greenhouse gas emissions. Occupant behavior, which includes the presence of people in the space, interactions between the occupant and building systems, and occupant adaptations to the built environment, has a significant impact on the energy consumption of buildings. Many researchers have investigated occupant behaviors at a single building scale, however, very few studies have been conducted at the community scale or urban scale. Our previous review study introduced human mobility modeling approach from other domains into the …

Investigating The Effects Of Suspended Algal Content, Dissolved Oxygen, And Temperature On A High-Frequency Acoustic Attenuation System In A Controlled Laboratory Environment, Noah Watson

Honors Theses

The Single Frequency Acoustic Attenuation System (SFAAS) has been developed at the National Center for Physical Acoustics (NCPA). This system uses acoustic methods to monitor fine suspended sediment concentration in streams. Site-specific calibrations are necessary for this system, and previous research has indicated that algal concentration or dissolved oxygen concentration of water may affect collected data. Temperature, dissolved oxygen concentration, and fluorescence, used as a proxy for algal concentration, were monitored during this system’s use, and calibrations were derived to account for the effect of each of these variables on acoustic measurements. It has been shown that temperature has a …

Comparative Life Cycle Assessment Of Recycling Processes For Perovskite Solar Cells, Juan P. Herrera, Jules Freeman, Achyuth Ravilla, Ilke Celik

Student Research Symposium

Perovskite solar cells (PSCs) have emerged as a promising option for solar energy generation. However, it is essential to consider the environmental impact of these innovative photovoltaic (PV) technologies as the industry moves towards commercialization. Researchers are currently exploring ways to recycle PSCs to recover valuable materials and reduce their environmental impact at the end of their life. To ensure the sustainability of PSCs, this study evaluates and compares the environmental impacts of five recently developed recycling approaches. The Tool for Reduction and Assessment of Chemicals (TRACI) method was utilized to measure environmental impacts in categories such as acidification (kg …

Pulse Modulation In Braided Pneumatic Actuators Mimics Contractile Behavior Of Biological Muscles, Mohamad Elzein

Student Research Symposium

Advancements in robotics and bioengineering aim to emulate biological muscle systems through robotic actuators, blending mechanical strength with biological adaptability. A lesser-explored aspect is mimicking the pulse-like control characteristic of biological muscles, which contract in response to action potentials from motoneurons, with muscle contractile force relying heavily on the timing between these potentials. This study explores the effect of pulse lengths and the gaps between pulses on braided pneumatic actuators (BPAs), which mimic the nonlinearity and dynamic response of biological muscles. It hypothesizes that artificial muscles utilizing pulse-based control will exhibit a similar force dependency on the intervals between pulses …

Deriving Analytical Design Constraints For Absolute & Relative Encoding Schemes In Functional Subnetworks, Cody W. Scharzenberger-Braet, Alexander Hunt

Student Research Symposium

As neural networks have become prolific solutions to modern problems, there has been a congruent rise in the popularity of the numerical machine learning techniques used to design them. While they are highly generalizable, numerical methods tend to produce networks that act as inscrutable “black boxes,” making it difficult to interpret their behavior. One solution to the problem of network transparency is to use analytical techniques, but these methods are underdeveloped compared to their numerical alternatives. In order to enhance the viability of analytical techniques, this work extends previous efforts to quantify the impact that non-spiking neural encoding schemes have …

Modeling Of Continuous Stirred Tank Reactor For Esterification Process, Olimjon Rikhsiboyevich Maksudov, Abdulaziz Nodirbek Ogli Bakhtiyorov, Orifjon Olimovich Zaripov, Аdhаm Tilovovich Norkobilov

Technical science and innovation

This paper presents a comprehensive study on the synthesis of ethyl acetate through the esterification of acetic acid with ethanol using a continuous stirred tank reactor (CSTR). Ethyl acetate is a significant solvent in various industries due to its eco-friendly characteristics and economic efficiency. The study develops a detailed mathematical model focusing on the operating of the CSTR to enhance the understanding of the reaction kinetics and thermodynamics in a continuous processing environment. The reactor model was validated with experimental data to optimize process parameters, aiming to improve yield and selectivity. Key variables such as reactant ratios, and operational temperatures …

Presence Of Atheromatous Plaques And Theirs Effects On The Blood Flow, Belhocine Mostefa Bm, Amrani Hichem Ah, Fedaoui Kamel Dr, Mazouz Hammoudi Mh

Emirates Journal for Engineering Research

The paper utilizes a finite element method to study both the blood flow and atheromatous plaques. Specifically, the COMSOL finite element package is employed to achieve a fluid model. COMSOL is a powerful finite element tool commonly used in various research and industrial domains to study multiphysics problems. The focus of the investigation is on the geometric aspects of the atheromatous plaques. The study considers different forms and arrangements of stenosis, taking into account the irregularities formed by various shapes of the plaques and the resulting flow patterns. The key findings of the research suggest that the pressure and velocity …

Analyzing Heat Generated From Electro-Osmotic Flow Utilizing Computational Fluid Dynamics, Jordan Elizabeth Grothe

Honors Thesis

Without extensive vascularization, the transfer of fluid and nutrients through human tissue is limited to diffusion and weak interstitial flow. Electroosmosis, or the flow of fluid driven by an electrical field, has become a promising solution. Scientists have begun applying electricity to human tissue to promote stronger interstitial flow; however, optimization of this process has proven to be a challenge due to ohmic heating. Cells function within a small range of temperatures and exposure to voltages exceeding the threshold will cause cells to degrade and die prematurely. This research seeks to better understand and quantify the range of voltage where …

Non-Contact Wind Turbine Blade Crack Detection Using Laser Doppler Vibrometers, Ali Zabihi, Farhood Aghdasi, Chadi Ellouzi, Nand Kishore Singh, Ratneshwar Jha, Chen Shen

Henry M. Rowan College of Engineering Departmental Research

In response to the growing global demand for both energy and a clean environment, there has been an unprecedented rise in the utilization of renewable energy. Wind energy plays a crucial role in striving for carbon neutrality due to its eco-friendly characteristics. Despite its significance, wind energy infrastructure is susceptible to damage from various factors including wind or sea waves, rapidly changing environmental conditions, delamination, crack formation, and structural deterioration over time. This research focuses on investigating non-destructive testing (NDT) of wind turbine blades (WTBs) using approaches based on the vibration of the structures. To this end, WTBs are first …

The Analysis Of Mechanical Exfoliation Of Graphene For Various Fabrication And Automation Techniques, Lance Yarbrough

Physics Undergraduate Honors Theses

Mechanical Exfoliation

Barocaloric Heat Pumps Based On Soft Materials., Naveen Weerasekera

Electronic Theses and Dissertations

Solid-state refrigeration offers a promising alternative to traditional vapor compression systems that are relatively inefficient, unreliable, and have a high global warming potential. Various solid-state cooling technologies, including those based on electrocaloric, magnetocaloric, and elastocaloric effects have been investigated in the recent past. However, concerns regarding their efficiency, scalability and cost remain. Refrigeration and heat pump technologies based on the barocaloric effect (temperature/entropy change due to hydrostatic pressure) hold great promise but have received comparatively less attention. Barocaloric heating/cooling based on low cost, compressible soft materials with large barocaloric response have the potential to pave the way for efficient, scalable, …

Numerical Investigation Of Supersonic Flow Over A Wedge By Solving 2d Euler Equations Utilizing The Steger–Warming Flux Vector Splitting (Fvs) Scheme, Mitch Wolff, Hashim H. Abada, Hussein Awad Kurdi Awad Kurdi Saad

Mechanical and Materials Engineering Faculty Publications

Supersonic flow over a half-angle wedge (θ = 15°) with an upstream Mach number of 2.0 was investigated using 2D Euler equations where sea level conditions were considered. The investigation employed the Steger–Warming flux vector splitting (FVS) method executed in MATLAB 9.13.0 (R2022b) software. The study involved a meticulous comparison between theoretical calculations and numerical results. Particularly, the research emphasized the angle of oblique shock and downstream flow properties. A substantial iteration count of 2000 iteratively refined the outcomes, underscoring the role of advanced computational resources. Validation and comparative assessment were conducted to elucidate the superiority of the Steger–Warming flux …

Implementation Of Explainable Ai For Bearing Fault Classification, Mohammad Mundiwala

Honors Scholar Theses

It is difficult to overstate the impact of artificial intelligence (AI) over the past decade. The rapid expansion of machine learning has stimulated a race to deploy AI in all facets of life, one such domain being machine health monitoring. There is no doubt that machine learning excels in prediction accuracy, but oftentimes, these models are cryptic and fail to provide valuable insight into their decisions. This paper presents an overview of a neural network and what it means to learn. Next, two distinct Explainable AI (XAI) techniques will be presented: Gradient Class Activation Mapping and SimplEx . Finally, these …

Modeling Vibration Stiffness: An Analytical Extension Of Hertzian Theory For Angular Contact Bearings With A Thin Viscoelastic Coating, Davis R. Burton

Honors Theses

This thesis considers the novel angular contact rolling-element bearings proposed by NASA’s Glenn Research Center, which are coated with a thin solid lubricant that exhibits viscoelastic behavior. Current analytical models for the dynamic stiffness matrix of angular contact bearings, critical for vibration analysis, lack the ability to model the effects of a solid coating, as well as the time dependencies inherent in viscoelastic theory. The author first presents an overview of the stiffness matrix derivation, followed by a treatment of the underlying Hertzian contact theory. An analytical extension of this theory is proposed which accounts for a thin elastic layer …

Towing Tank Trials Of Hydrokinetic Turbine Scale Model To Support Marine Energy System Verification, Shahab Rouhi

LSU New Orleans Theses and Dissertations

In response to the escalating demand for sustainable energy solutions and the critical reevaluation of conventional fossil fuels due to environmental concerns, this dissertation embarks on a comprehensive exploration of hydrokinetic energy as a promising alternative. The study delves into the underexplored domain of hydrokinetic energy, leveraging innovative methodologies for effective utilization and harnessing, particularly through the development and investigation of hydrokinetic turbines.

In the realm of hydrokinetic energy conversion, our research has exclusively concentrated on horizontal-axis turbines, distinct from other turbine configurations. Noteworthy is the adaptation of a conventional horizontal-axis wind turbine for water currents, revealing enhanced performance through …

Transfer-Learning-Enhanced Regression Generative Adversarial Networks For Optimal Evtol Takeoff Trajectory Prediction, Shuan Tai Yeh, Xiaosong Du

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Electric vertical takeoff and landing (eVTOL) aircraft represent a crucial aviation technology to transform future transportation systems. The unique characteristics of eVTOL aircraft include reduced noise, low pollutant emission, efficient operating cost, and flexible maneuverability, which in the meantime pose critical challenges to advanced power retention techniques. Thus, optimal takeoff trajectory design is essential due to immense power demands during eVTOL takeoffs. Conventional design optimizations, however, adopt high-fidelity simulation models in an iterative manner resulting in a computationally intensive mechanism. In this work, we implement a surrogate-enabled inverse mapping optimization architecture, i.e., directly predicting optimal designs from design requirements (including …

Summonable Construction Delivery Robot, Kevin M. Lewis

Honors Capstones

In many different construction industries, there is a need for tools, parts, and other necessary items to be transported quickly and efficiently over various types of terrain. Human resources have often been used to address these needs, which can become very time and cost inefficient over long periods. The design proposal here is aimed at addressing this need by developing an autonomous outdoor mobile robot based on a quadrupedal robot design. This approach differs by incorporating a wheeled and quadrupedal hybrid actuation system that provides terrain negotiation and speed at the appropriate times. The team uses Robot Operating System (ROS) …

Spatial Hearing In Simulated Reverberant Classroom Environments, Gabriel Seth Evan Weeldreyer

Durham School of Architectural Engineering and Construction: Dissertations, Theses, and Student Research

Spatial hearing provides access to auditory spatial cues that promote speech perception in noisy listening situations. However, reverberation degrades auditory spatial cues and limits listeners’ ability to utilize these cues for segregating target speech from competing babble. Hence, spatial unmasking—an intelligibility benefit from a spatial separation between a target and masker—is reduced in reverberant environments as compared to free field. This work tests the hypothesis that interaural decorrelation, the result of increasing reverberation, will broaden the perceived auditory source width with a cascading effect of reduced auditory spatial acuity and subsequently poorer spatial unmasking. To understand the perceptual consequences of …

Investigation On The Effects Of Biofouling On The Boundary Layer, Adam N. Bacon

LSU New Orleans Theses and Dissertations

This study is an investigation of the effect of biofouling on the boundary layer of a flat plate and a NACA 4-digit series foil. Three identical hydrofoils made of resin were placed in the Gulf of Mexico at Grand Isle, Louisiana, and observed and analyzed by marine biologists at the University of New Orleans for their species composition. The resulting biofouling that grew was primarily made up of barnacles and bryozoans. The foils were submerged in an open channel flume at zero incidence and subjected to a series of experiments whose arc-length Reynolds numbers ranged from approximately 13000 to 32000. …

Experiment Development And Validation Of A Granular Jamming Robotic Gripper, Jacob R. Dowd

UNLV Theses, Dissertations, Professional Papers, and Capstones

A granular jamming gripper (GJG) is widely known as a Universal Gripper because of the wide range of objects that it can grasp and the simplicity of control, design, and manufacturing. Despite multitude of research improving the GJG, here, we focus on the base version of the GJG and attempt to glean the range of objects that it may reliably grasp. Despite the limited range of objects, which were a sphere, rectangular prism, and cylinder, we gleaned geometric properties as it relates to successful and unsuccessful grasping. This was based on the two types of testing: push and pull testing …

Performance Effects Of Dissociated Hydrogen In Nuclear Thermal Propulsion Engines, Richard Adam Gorrell

UNLV Theses, Dissertations, Professional Papers, and Capstones

Nuclear thermal propulsion (NTP) research considers hydrogen dissociation as negligible to design and analysis of propulsion engines. This study reintroduces chemically reacting flow to NTP engine analysis for investigation of the dissociation effect on engine performance. A first-principles approach observes the basic chemical mechanism and reaction within the high-speed, high-temperature NTP flow to baseline expected atomic hydrogen levels and validate equilibrium. A surface reaction study looks into hydrogen absorption through dissociation and its effect on the boundary layer, and bulk flow. For total performance, the resulting dissociated flow is analyzed through nozzle expansion and performance metrics calculated.

All historic reactor …

The Analysis Of Mechanical Exfoliation Of Graphene For Various Fabrication And Automation Techniques, Lance Yarbrough

Mechanical Engineering Undergraduate Honors Theses

Mechanical Exfoliation of Graphene is an often-overlooked portion of the fabrication of quantum devices, and to create more devices quickly, optimizing this process to generate better flakes is critical. In addition, it would be valuable to simulate test pulls quickly, to gain insight on flake quality of various materials and exfoliation conditions. Physical pulls of graphene at various temperatures, pull forces, and pull repetitions were analyzed and compared to the results of ANSYS simulations, solved for similar results. Using ANSYS’ ability to predict trends in exfoliations, flake thickness and coverage using stress and deflection analyses were investigated. Generally, both strongly …

Experimental And Numerical Investigation Of Air-Cooled Heat Sinks, Ethan Weems

Mechanical Engineering Undergraduate Honors Theses

Lightweight and affordable cooling capabilities are critical as the physical scale of electronics continues to decrease. Air-cooled heat sinks that dissipate heat from electronic components to the surrounding air are excellent candidates to fill this role. While plate-fin and pin-fin heat sinks have been implemented extensively for electronic cooling, recent advances in additive manufacturing enable the fabrication of more complex structures. In this undergraduate Honors thesis, a means by which to generate novel heat sink geometries is presented. To that end, an experimental characterization facility is developed to evaluate existing traditional heat sinks. The heat transfer performance of the heat …

Numerical Simulation Of Laser Induced Elastic Waves In Response To Short And Ultrashort Laser Pulses., Alireza Zarei

All Dissertations

In an era of intensified market competition, the demand for cost-effective, high-quality, high-performance, and reliable products continues to rise. Meeting this demand necessitates the mass production of premium products through the integration of cutting-edge technologies and advanced materials while ensuring their integrity and safety. In this context, Nondestructive Testing (NDT) techniques emerge as indispensable tools for guaranteeing the integrity, reliability, and safety of products across diverse industries.

Various NDT techniques, including ultrasonic testing, computed tomography, thermography, and acoustic emissions, have long served as cornerstones for inspecting materials and structures. Among these, ultrasonic testing stands out as the most prevalent method, …

Drag Reduction In Channel Flow Configurations For Laminar And Turbulent Flow Past Superhydrophobic Surfaces, Henry Louis Ems

Dissertations and Doctoral Documents, University of Nebraska-Lincoln, 2023–

In this work, we present friction drag reduction in minichannel laminar flow past superhydrophobic metallic surfaces. Femtosecond laser surface processing (FLSP), a one-step scalable method, was used to create permanent microscale and nanoscale structures on 316 stainless steel plates. The resulting superhydrophilic plates were covered by tall (215 μm) or short (27 μm) structures. The FLSP plates were then transitioned to superhydrophobic by evaporative deposition of a fluorinated silane, a low surface energy coating. Using purified water, the friction factor was obtained by measuring pressure drop along a minichannel with a rectangular cross section for flow rates corresponding …

Thermal-Fluid And Optical Considerations In The Design Of Porous Cavity Receivers, Koda D. Boldt

Boise State University Theses and Dissertations

Concentrated solar power (CSP) is a versatile renewable energy source that cleanly provides thermal energy by means of concentrating solar irradiance. One form of CSP, central receiver systems (CRS), utilizes receivers that allow for a solid medium to act as a heat exchanger between the solar irradiance and an optically clear working fluid. This solid medium can take many forms. One such form that shows great potential in high temperature applications is a porous receiver made of a ceramic material. The porous media is subject to solar irradiance to heat its surface. Air is then pulled across the porous media …

Multiscale Design And Numerical Modeling Of A Porous Lattice For Concentrated Solar Thermal Applications, Aidan T. Mcconnehey

Boise State University Theses and Dissertations

Due to the rising demand in the market for renewable energy, concentrated solar power (CSP) systems are increasing in popularity. One CSP receiver configuration showing increased promise is the volumetric cavity solar receiver, which employs a porous lattice for radiative heat absorption and transport. However, due to the presence of large temperature gradients, mechanical failure as a result of thermal expansion is a crucial metric in the design of these systems.

This thesis involves the design of a porous lattice, constrained by thermal transport requirements as well as mechanical failure criteria. The design is then numerically analyzed to determine thermal …

Evaluation Of Beach-Fx — Beach Nourishment Planning Model – Miami Beach Case Study, Brennan Chase Banks

Theses and Dissertations

Miami Beach, located on the Southeast coast of Florida, is a concerning location for coastal erosion because of the increasing intensity and frequency of tropical storms, nuisance flooding, and accelerated sea-level rise due to climate change. Miami Beach is famous for its beautiful beaches, making it a location of high interest for tourists, citizens, and investors. It is vital for coastal practitioners to accurately model coastal processes, beach evolution, and storm damage during the planning stage of coastal protection projects. The U.S. Army Corps of Engineers developed the Beach-fx model as a tool for engineers, planners, and economists to …

Developing General Purpose Apps To Automate Image Analysis Of Wave-Augmented-Varicose-Explosion Atomization And Other Multi-Phase Interfacial Flows, Ethan Newkirk

Senior Honors Theses

Atomization involves disrupting a flow of contiguous liquid into small droplets ranging from one submicron to several hundred microns (micrometers) in diameter through the processes of exerting sufficient forces that disrupt the retaining surface tensions of the liquid. Understanding this phenomenon requires high-speed imaging from physical models or rigorous multiphase computational fluid dynamics models. We produce a MATLAB application that utilizes various methods of image analysis to quickly analyze and store mathematical data from detailed image analyses. We present a user with numerous tools and capabilities that provide results that deviate from 1.8% to 8.9% of the original image sequence …

On-Demand Fabrication Of Piezoelectric Sensors For In-Space Structural Health Monitoring, Amanda White, Isaac Little, Anastasiya Artyuk, Nicholas Mckibben, Fereshteh Rajabi Kouchi, Claire Chen, David Estrada, Zhangxian Deng

Mechanical and Biomedical Engineering Faculty Publications and Presentations

Inflatable structures, promising for future deep space exploration missions, are vulnerable to damage from micrometeoroid and orbital debris impacts. Polyvinylidene fluoride-trifluoroethylene (PVDF-trFE) is a flexible, biocompatible, and chemical-resistant material capable of detecting impact forces due to its piezoelectric properties. This study used a state-of-the-art material extrusion system that has been validated for in-space manufacturing, to facilitate fast-prototyping of consistent and uniform PVDF-trFE films. By systematically investigating ink synthesis, printer settings, and post-processing conditions, this research established a comprehensive understanding of the process-structure-property relationship of printed PVDF-trFE. Consequently, this study consistently achieved the printing of PVDF-trFE films with a thickness of …