Digital Commons Network^™

Enhanced Scratch Resistance Of Graphite Coating Using A Polydopamine Adhesive Underlayer, Adedoyin Abe, Min Zou

Mechanical Engineering Faculty Publications and Presentations

Graphite has great potential as a solid lubricant due to its low friction properties, but its poor adhesion to metal substrates limits its durability unless modified. This study explores the use of polydopamine (PDA), a bioinspired adhesive polymer, as an underlayer to enhance the adhesion and scratch resistance of graphite coatings applied to stainless steel (SS) substrates. Progressive load scratch tests were performed using a stainless steel ball counterface under normal loads ranging from 0.5 to 18 N. The PDA-modified coatings demonstrated significantly improved adhesion and durability, withstanding contact pressures up to 1.6 GPa without delamination or failure. In contrast, …

Non-Invasive Near-Field Microwave Sensors For Industrial Internet Of Things Applications, Abirami K

Theses and Dissertations

The industrial sector has been revolutionized by Industrial Revolution 4.0 with the advent of the Internet of Things (IoT) which integrates the physical environment using smart sensors and Artificial Intelligence (AI) mechanisms. This demands the design of smart sensors and actuators to improve the quality of services in Industrial IoT (IIoT). The sensor design using the microwave resonating principle has attracted the research and industrial community for portable, non-invasive, non-destructive and hygienic means to evaluate the quality of substances in the food and farming industry. The microwave planar sensor has advantages in terms of low footprint, low cost, and ease …

A Survey On Security Applications With Smartnics: Taxonomy, Implementations, Challenges, And Future Trends, Serigo Elizalde, Ali Alsabeh, Ali Mazloum, Samia Choeiri, Elie Kfoury, Jose Gomez, Jorge Crichigno

Faculty Publications

Over the last decade, network applications have grown exponentially, demanding high-speed interconnects. Unfortunately, chip manufacturers are approaching the upper limits of silicon-based computing with slow improvements in computational performance and energy efficiency. This trend has forced the industry to shift paradigms, moving from monolithic architectures to heterogeneous, domain-specific designs. Moreover, the ever-evolving threats compromise digital services and demand more scalable and flexible solutions to ensure service continuity in production networks. Smart Network Interface Cards (SmartNICs) are a product of this new paradigm, integrating domain-specific engines and general-purpose cores to offload various network infrastructure tasks, including those related to security. This …

Energy Equity In The Built Environment: Analyzing Building Energy Consumption For American Low-Income Households, Sorena Vosoughkhosravi

LSU Doctoral Dissertations

The built environment consumes a significant amount of energy in the United States, with outdated and inefficient affordable housing increasing financial pressure on low-income households (LIHs) who face high energy burdens. This research aims to assess the energy performance of American households, focusing on LIHs, to promote energy justice by providing data-driven insights and models for energy efficiency improvements. More specifically, this research aims to (1) create a large-scale national residential building energy dataset by integrating the American Housing Survey and the Residential Energy Consumption Survey using machine learning techniques; (2) analyze and model American household occupancy profiles by leveraging …

Anion Exchange Membrane Durability For Electrochemical Co2 Reduction In Membrane Electrode Assembly Cells, Soundarzo Tasnim

LSU Master's Theses

The electrochemical reduction of CO₂ using membrane electrode assembly (MEA) cells has emerged as a promising approach for carbon capture and conversion into valuable products. This study investigates the degradation mechanisms of anion exchange membranes (AEMs) in CO₂ reduction applications, focusing on Sustainion X37-50, PiperION, and FAA-3-50. The research analyzes the impact of chemical and mechanical degradation on membrane performance, highlighting key stability challenges in long-term operation. Fourier transform infrared spectroscopy (FTIR) and electrochemical impedance spectroscopy (EIS) were employed to monitor functional group stability and ionic conductivity loss over extended operation. The results indicate that hydroxide-induced degradation leads to nucleophilic …

Exact Solutions Of M-Fractional Complex Ginzburg-Landau Equation Via Two Analytical Methods, Nematollah Kadkhoda, Mojtaba Baymani, Maad M. Mijwil, Mostafa Abotaleb

Iraqi Journal for Computer Science and Mathematics

This article investigates the M-fractional complex Ginzburg-Landau (CGL) equationby utilizing the modified simplest equation method and the modified G'G-expansion method. The CGL holds significant importance in the realm of oscillatory phenomena and optical fibers. By implementing a fractional complex transformation, the M-fractional CGL equation is transformed into an ordinary differential equation (ODE).By employing these methodologies, bright periodic solutions, periodic solutions, and dark wave solutions relevant to phenomena witnessed in nonlinear optics or plasma environments are ascertained.It is demonstrated that these methods are very powerful and efficient to solve many fractional differential equations.

Reason for Expression of Concern: …

Enhancing Image Denoising Performance Through Cosine Similarity-Based Block Matching And Adaptive Thresholding - Ca-Ebm3d, R. Padmapriya, A. Jeyasekar

Iraqi Journal for Computer Science and Mathematics

Image denoising plays a vital role in enhancing visual quality by effectively suppressing noise while retaining critical image structures and textures. Traditional Block-Matching and 3D (BM3D) Filtering techniques, although widely adopted, often encounter challenges in achieving an optimal trade-off between noise reduction and feature preservation due to limitations in fixed-thresholding strategies and suboptimal block matching. To address these shortcomings, this study introduces a novel Cosine Adaptive BM3D (CA-BM3D) approach, which integrates cosine similarity for more accurate block matching and incorporates adaptive thresholding to enhance denoising efficiency. The proposed method was evaluated on six standard 8-bit grayscale images such as Leena …

From Industrial Automation To Intelligent Automation: The Impact Of Iiot On Process Control - A Review?, Ali S. Allahloh, Mohammad Sarfraz, Duraid Y. Mohammed, Nadeen Khaleel Ibrahim, Hayder Hussein Thary

Iraqi Journal for Computer Science and Mathematics

The Industrial Internet of Things (IIoT) is reshaping process control, turning torrents of plant data into near-instant insight. Field evidence already shows unplanned-downtime cuts of 55%, maintenance-budget savings of 40%, and gains in overall-equipment-effectiveness of roughly 15%; nevertheless, fewer than 30% of facilities have pushed beyond pilot scale to full, always-on predictive maintenance. To clarify why, this review screens 312 Scopus records published between 2010 and 2023, then subjects 62 peer-reviewed studies and a broad set of industry reports to deep content analysis, bibliometric mapping, and thematic clustering.The results reveal four tightly connected research fronts—IIoT/Industry 4.0 core technologies, classical process-control …

Reliability-Based Design Optimization Using Differential-Algebraic Equations, Saad Abbas Abed, Mona Ghassan, Shaimaa Qais Latef, Hind S. Hassan

Iraqi Journal for Computer Science and Mathematics

Reliability-based design optimization (RBDO) determines optimal design parameters by incorporating reliability constraints. This paper presents a RBDO approach using differential-algebraic equations (DAEs) for modeling and constraints. DAEs provide an accurate representation of dynamic engineering systems with coupled differential and algebraic equations. However, the nonlinearity and implicit nature of DAEs pose challenges for uncertainty propagation and optimization. This study proposes an efficient RBDO methodology based on stochastic collocation to quantify uncertainty in DAEs. The DAEs are transformed into an explicit ODE system to enable direct uncertainty analysis via sampling. Optimization under reliability constraints is achieved using a sequential approximate programming strategy. …

Challenges And Constraints In Trajectory Planning For Autonomous Robots, Jawad Abdouni, Tarik Jarou, Toufik Mzili, Abderrahim Waga, Karima Bensassi

Iraqi Journal for Computer Science and Mathematics

Autonomous mobile robots have revolutionized navigation by operating without human intervention, leveraging advanced data acquisition systems such as cameras, radar, and LIDAR, along with sophisticated planning, localization, and control algorithms. A critical challenge in this domain is path planning: determining optimal trajectories to ensure safe and efficient travel in diverse environments. This paper addresses the need to systematically evaluate trajectory-planning algorithms, whose selection directly impacts navigation performance. We present a comprehensive analysis of various classes of path-planning methods, detailing their advantages, limitations, and application contexts. By comparing these algorithms, we identify key criteria for selecting the most suitable approach for …

Diagnosis Of Covid-19 And Viral Pneumonia With Chest X-Ray Images Using Resnet-34, Sudhir Anakal, Krishna Prasad K, Chandrashekhar Uppin, Dileep Kumar M

Iraqi Journal for Computer Science and Mathematics

COVID-19 is a highly contagious viral infection that primarily affects the respiratory system, causing symptoms such as high fever, cough, and severe respiratory distress. Early detection of the disease is of utmost importance to control the spread and severity. Common diagnostic methods include Reverse Transcription Polymerase Chain Reaction (RT-PCR), antigen tests, chest X-rays, and computed tomography (CT) scans. Similarly, viral pneumonia, another severe lung infection, leads to fluid or pus accumulation in the lungs, causing symptoms such as chest pain, fatigue, excessive sweating, and nausea. The elderly and young children are particularly vulnerable to severe complications. Similarly, viral pneumonia, another …

Soft-Polymeric Contact Lenses Brands Evaluation According To User Preferences, Lina M. Shaker, Wan Nor Roslam Wan Isahak

AUIQ Technical Engineering Science

The development of soft-polymeric contact lenses (SPCLs) has significantly enhanced vision correction by integrating advanced polymeric materials with optimized optical properties. This study examines the impact of refractive index (RI), oxygen permeability (Dk/t), and water content (EWC%) on visual quality and ocular health, correlating material properties with user-reported experiences. A survey of 5,585 medical SPCL users revealed that 31% experienced ocular fatigue and redness, often linked to optical aberrations and replacement frequency. Notably, commercially available SPCLs exhibit RI values ranging from 1.37 to 1.43, deviating from the natural ocular tissue RI (∼1.33), which contributes to light distortions and reduced visual …

Internet Of Things In Sustainable Agriculture Systems, Ataguba E. Hillary, Ayodeji A. Okubanjo, Nurudeen. S. Lawal, Abisola A. Olayiwola

AUIQ Technical Engineering Science

The agriculture industry has evolved toward intelligent, data-driven processes due to the growing need for food worldwide, environmental sustainability, and effective resource use. A thorough analysis of smart agriculture as a game-changing element of the industry 4.0 revolution is provided in this study, with a focus on the incorporation of Internet of Things (IoT)-based technologies for sustainable farming. To optimize agricultural processes including irrigation, crop health monitoring, climate and weather tracking, animal management, and disease detection, it investigates the functions and uses of smart sensors and IoT devices. The study demonstrates how smart agriculture may meet important issues like food …

Internet Of Things For Sustainable Transportation Systems, Ayodeji Akinsoji Okubanjo, Ignatius Kema Okakwu, Oluyinka Esther Olaifa, Matthew Babatunde Olajide, Olufemi Peter Alao, Olayiwola Abisola

Al-Mustaqbal Journal of Sustainability in Engineering Sciences

This paper highlights the opportunities for the Internet of Things in the transportation industry. The need for the Internet of Things and its architecture to address various complex challenges in the transportation sector are discussed. Various smart applications of the Internet of Things and its noticeable benefits over the existing technology are well articulated. In addition, the role of new and emerging technology such as artificial intelligence, machine learning, big data, cloud, data storage, and analysis for future sustainable transportation are highlighted with specific cases. Furthermore, smart areas of the Internet of Things in transportation are pictorially discussed. In addition, …

Pollution And Biodiversity Loss: A Comprehensive Review Of Impacts And Mechanisms, Great Iruoghene Edo, Agatha Ngukuran Jikah, Patrick Othuke Akpoghelie, Joseph Oghenewogaga Owheruo, Endurance Fegor Isoje, Ufuoma Augustina Igbuku, Arthur Efeoghene Athan Essaghah

Al-Mustaqbal Journal of Sustainability in Engineering Sciences

Biodiversity plays a vital role in maintaining ecological balance and providing essential ecosystem services. However, human activities, including pollution and overexploitation, have led to significant biodiversity loss. Pollution has particularly emerged as a major threat to biodiversity, impacting various species and ecosystems worldwide. This article synthesizes evidence on pollution-driven biodiversity loss, emphasizing industrial, agricultural, and urban sources. We discuss cascading ecosystem impacts and propose mitigation strategies to inform policy making. Overall, the article highlights the importance of addressing the impact of pollution on biodiversity to ensure the preservation of our planet's ecology and the sustainability of our natural resources.

Biosynthesis Of Metallic Nanoparticles Using Plant Extracts: Mechanisms, Advances, And Sustainable Applications, Alice Njolke Mafe, Great Iruoghene Edo, Patrick Othuke Akpoghelie, Endurance Fegor Isoje, Ufuoma Augustina Igbuku, Joseph Oghenewogaga Owheruo, Arthur Efeoghene Athan Essaghah

Al-Mustaqbal Journal of Sustainability in Engineering Sciences

Growing concerns over the environmental and health impacts of conventional nanoparticle synthesis have driven a shift toward green, plant-based methods. This review highlights the biosynthesis of nanoparticles using plant extracts as a sustainable, economical and non-toxic alternative. Plant-derived phytochemicals such as flavonoids, phenolics, and alkaloids serve dual roles as natural reducing and stabilizing agents, enabling the production of nanoparticles typically ranging between 10 and 100 nm. Several studies have demonstrated up to 80% yield improvement when using optimized extracts from plants like Azadirachta indica and Ocimum sanctum. The review outlines recent progress, including the use of novel botanical sources, …

Especial Linkage To Poly(Vinyl Chloride) Structure To Enhance Its Characteristics, Amamer M. Redwan

Al-Mustaqbal Journal of Sustainability in Engineering Sciences

Due to a variety of factors that motivated multiple creativities, modification of poly(vinyl chloride) chemical structure has become a flourishing area of research. The current study acts as a condensed overview of the improvements produced using various methods for adjusting the characteristics of poly(vinyl chloride) that is widely utilized. This study explains and emphasizes, through a brief discussion, the findings of the efforts made in recent decades, even if it does not address all of the issues at hand. The article covers a special linkage to the polymer chemical structure such as using heterocyclic moieties to modify poly(vinyl chloride), C–N …

Synthesis And Characterization Of Temperature- And Ph-Responsive Pia-B-Pnipam@Fe3o4 Nanocomposites, Swati Kumari, Cayla Cook, Fatema Tarannum, Erick S. Vasquez-Guardado, Olufermi Ogunjimi, Keisha Walters

Chemical Engineering Faculty Publications and Presentations

Stimuli-responsive polymers (SRPs) have garnered significant attention in recent decades due to their immense potential in biomedical and environmental applications. When these SRPs are grafted onto magnetic nanoparticles, they form multifunctional nanocomposites capable of various complex applications, such as targeted drug delivery, advanced separations, and magnetic resonance imaging. In this study, we employed a one-step hydrothermal method using 3-aminopropyltrimethoxysilane (APTES) to synthesize APTES-modified Fe3O4 nanoparticles (APTES@Fe3O4) featuring reactive terminal amine groups. Subsequently, via two consecutive surface-initiated atom transfer radical polymerizations (SI-ATRP), pH- and temperature-responsive polymer blocks were grown from the Fe3O4 surface, resulting in the formation of poly(itaconic acid)-block-poly(N-isopropyl acrylamide) …

Synthesis And Characterization Of Temperature- And Ph-Responsive Pia-B-Pnipam@Fe3O4 Nanocomposites, Swati Kumari, Cayla Cook, Fatema Tarannum, Erick Salvador Vasquez-Guardado, Olufemi Ogunjimi, Keisha B. Walters

Chemical and Materials Engineering Faculty Publications

Stimuli-responsive polymers (SRPs) have garnered significant attention in recent decades due to their immense potential in biomedical and environmental applications. When these SRPs are grafted onto magnetic nanoparticles, they form multifunctional nanocomposites capable of various complex applications, such as targeted drug delivery, advanced separations, and magnetic resonance imaging. In this study, we employed a one-step hydrothermal method using 3-aminopropyltrimethoxysilane (APTES) to synthesize APTES-modified Fe₃O₄ nanoparticles (APTES@Fe₃O₄) featuring reactive terminal amine groups. Subsequently, via two consecutive surface-initiated atom transfer radical polymerizations (SI-ATRP), pH- and temperature-responsive polymer blocks were grown from the Fe₃O …

An Approach To The Mesostructure Sealing In Coal By Mine Water Clathrate, Haiyang Yi, Ze Li, Tao Yang, Zhuang Zhuo, Tingxiang Chu, Xianfeng Shi, Guang Xu

Mining Engineering Faculty Research & Creative Works

The sealing performance of coal mass is of significant importance for converting abandoned mines into geological repository. This study presents a novel approach to enhancing the sealing of the pore structure in coal seams, such a technique utilizes mined water as the primary substance and additive solution based crystalline. Sequent tests are implemented, including saturation test, ion chromatography test, permeability test and scanning electronic microscope observations. It was suggested that the produced crystalline decrease the porosity and permeability of the coal, with different crystal morphologies due to various ions of additive solutions. The produced rod-shaped crystals have the most remarkable …

Reduction-Driven Mobilization Of Structural Fe In Clay Minerals With High Fe Content, Anke Neumann, Luiza Notini, W. A.P.Jeewantha Premaratne, Drew E. Latta, Michelle M. Scherer

Michigan Tech Publications

Clay minerals contain significant amounts of Fe in their alumosilicate framework, and this structural Fe can be reduced and re-oxidized, constituting a potentially renewable source of reduction equivalents in sedimentary environments. However, dissolution and/or clay mineral transformations during microbial Fe reduction contradict this concept. Here, we investigate how Fe reduction and re-oxidation affect the propensity of Fe to be released from the clay mineral structure and use selective sequential extractions in combination with Mössbauer spectroscopy. Negligible amounts of Fe were released in the sequential extraction of high Fe content clay minerals NAu-1 and NAu-2. Once aqueous Fe(II) was added as …

Studying Effect Of Temperature On Photovoltaic Characteristics Of Photovoltaic Modules Based On Cigs Solar Cells, Farrux Anvar O‘G‘Li Akbarov, Anvar Akbarovich Alimov

Technical science and innovation

The article presents the experimental results of the temperature dependence of the load current-voltage characteristics of a solar photovoltaic (PV) module based on a polycrystalline semiconductor binary compound Cu(In,Ga)Se₂ under normal sunlight P_rad=800±5 W/m², in a temperature range of (32÷60) ^оС. It was found that the temperature dependence of the photocurrent has two slopes, which is explained by a change in the generation-recombination mechanism. An increase in the short-circuit current with an increase in the temperature of the photovoltaic module is explained by an increase in the drift length of minority charge carriers, due …

Algorithms For Combined Regular Synthesis Of Controller Parameters In Control Systems For Dynamic Objects, Khusan Zakirovich Igamberdiev, Latafat Abbas Gizi Gardashova, Yulduz Mukhtarkhodjayevna Abdurakhmanova, Uktam Farkhodovich Mamirov

Technical science and innovation

Nonlinear control system that includes m-dimensional input control signal and extended (n+s) - dimensional state vector, the last s components of which form a vector of unknown parameters θ satisfying a general difference equation is being considered. The quality criterion is determined by the loss function. The optimal control must satisfy the Bellman equation with respect to the optimal loss function. To be defined an approximate solution that preserves an active use of information. For this purpose, the system is linearized in accordance to the nominal trajectory. This problem is seen as incorrectly stated. The values of the preliminary data …

Development Of An Experimental Stand For The Study Of The Directions Of Movement And Velocity Of Air Flows In The Pneumatic Channel Of The Final Aspiration Of The Muz-16 Air Sieve Separator, Alexey Igorevich Ermakov, Alexey Alexandrovich Yazenkov, Sergey Anatolyevich Zelenko, Zulfiya Kakhramonovna Ergasheva

Technical science and innovation

The article describes the principle of operation of the MUZ-16 air-sieve separator produced by CJSC Borisov Plant Metalist, intended for preliminary, primary and secondary purification of grain and seeds of cereals, legumes, cereal crops and rapeseed. The results of a study of the directions of air flow in the MUZ-16 aspiration system and the efficiency of purifying buckwheat from impurities that differ in aerodynamic properties are presented. It has been established that the part of the MUZ-16 aspiration system, responsible for preliminary aspiration, works effectively, while the part of the system responsible for the final aspiration of the grain mixture …

Research Of Hereditarily Deformable Structures Under Seismic Impacts, Abdali Abdukarimov, Kazbek Nuratdinov

Technical science and innovation

This article examines the responses of a structure to both single-component and multi-component seismic impacts if they are generally described by three linear displacements and three rotations of the foundation relative to three orthogonal axes.

A mathematical apparatus has been created that allows developing statistical theories of seismic resistance for studying hereditarily deformable structures under random seismic impacts. Using impulse transition functions, having established the explicit form of the reaction of hereditarily deformable structures to an arbitrary form of random disturbance, it is possible to determine: the mathematical expectation and moments of the outgoing process; correlation functions; spectral densities, i.e. …

Chromatography In Analysis And Quality Control Of Oil And Gas Products: Modern Approaches And Prospects, Muborak Akramovna Mirshomilova, Natalia Evgenievna Sheina, Lala Bekirova

Technical science and innovation

Chromatography plays a key role in the analysis and quality control of oil and gas products. Modern chromatographic methods, including gas and liquid chromatography, provide high accuracy, sensitivity and speed of analysis. They allow you to identify impurities, control the composition and compliance of products with standards. The article considers innovative approaches, such as multidimensional chromatography and the use of automated systems. Development prospects are discussed, including integration with AI and digital technologies, which opens up new opportunities to improve the efficiency of quality control in the oil and gas industry. This article considers the role of chromatographic methods in …

Technological Schemes For Recycling Used Mineral Oils Carbon-Based Adsorbents Derived From Petroleum Coke, Jaloliddin Sharafiddinovich Bakhtiyorov, Vais Narzullaevich Juraev, Mirzhalol Nuriddinovich Norpulatov

Technical science and innovation

Currently, the demand for mineral oils used in engine vehicles and transformers is increasing year by year worldwide. Additionally, a significant portion of used oils is burned as fuel. At present, the contact method is widely used for oil regeneration with the help of adsorbents such as aluminosilicates, zeolites, silica gels, bleaching clays, and others. The existing industrial reprocessing technologies are of great importance in the recycling of used engine and transformer oils. Furthermore, scientists worldwide are conducting research to create long-lasting carbon-based adsorbents for the regeneration of used engine and transformer mineral oils. In this regard, special attention is …

Technical And Economic Justification Of The New Design Of A Hydro-Accumulation Syste, Kurbon Salikhdjanovich Dzhuraev, Abdurasul Sayfutdinov, Elyor Doniyorovich Ismoilov

Technical science and innovation

The effective utilization of renewable energy sources such as solar and wind requires reliable and efficient energy storage systems due to their irregular and intermittent supply. This paper presents a novel hydro-accumulation system that significantly reduces energy consumption by integrating hydraulic ram pumps instead of traditional electrically powered pumps. The proposed system operates in cascade mode, where the kinetic energy of water is used multiple times through a sequence of hydraulic rams to pump water from a lower reservoir back to the upper one. Each stage of the system reuses the outflow water of the previous ram, achieving up to …

Research On Geological Complications Occurring During Drilling Operations At Uzbekneftegaz Jsc Wells, Otabek Rajabovich Eshmurodov, Komilxodja Anvarxodjayevich Raximov, Shaxnoza Hikmatullayevna Mirsaatova, Tolib Olimovich Komilov, Sherali Halloqovich Umedov

Technical science and innovation

This article presents an analysis of maintaining wellbore stability, preventing pack-off formation, stuck pipe incidents, and drilling fluid losses. A technology aimed at ensuring successful and high-quality trouble-free well drilling is analyzed and recommended. Based on data obtained from the Surkhandarya Basin fields, many wells were not drilled to the designed depth. Geophysical data from studied fields indicate that pore pressure retained in clay formations causes wellbore instability. These data also help to identify zones prone to collapse; however, the direct measurement of pore pressure in such formations remains impossible. This research was primarily conducted in the Ustyurt region, one …

Research Into Technological Features In The Curring Process Of Multilayer Polymer Composite Parts, Umidbek Dilshod Ugli Kosimov, Jonibek Kobilovich Tokhirov, Andrey Dmitrievich Novikov

Technical science and innovation

This paper examines the main technologies and mechanisms used in the curing process of multilayer thick-walled parts of unmanned aerial vehicles (UAVs) made of polymer composite materials (PCM) based on epoxy resin. The study provides a detailed analysis of the technological features of the curing process, its kinetics, and the influence of heat transfer mechanisms on the final quality of molded components. It is emphasized that due to the low thermal conductivity of PCM, temperature inhomogeneity may occur during curing, leading to defects, internal stresses, and deterioration of the mechanical properties of the product. Therefore, ensuring uniform temperature distribution throughout …