Digital Commons Network^™

Technological Schemes For Recycling Used Mineral Oils Carbon-Based Adsorbents Derived From Petroleum Coke, Jaloliddin Sharafiddinovich Bakhtiyorov, Vais Narzullaevich Juraev, Mirzhalol Nuriddinovich Norpulatov

Technical science and innovation

Currently, the demand for mineral oils used in engine vehicles and transformers is increasing year by year worldwide. Additionally, a significant portion of used oils is burned as fuel. At present, the contact method is widely used for oil regeneration with the help of adsorbents such as aluminosilicates, zeolites, silica gels, bleaching clays, and others. The existing industrial reprocessing technologies are of great importance in the recycling of used engine and transformer oils. Furthermore, scientists worldwide are conducting research to create long-lasting carbon-based adsorbents for the regeneration of used engine and transformer mineral oils. In this regard, special attention is …

Technical And Economic Justification Of The New Design Of A Hydro-Accumulation Syste, Kurbon Salikhdjanovich Dzhuraev, Abdurasul Sayfutdinov, Elyor Doniyorovich Ismoilov

Technical science and innovation

The effective utilization of renewable energy sources such as solar and wind requires reliable and efficient energy storage systems due to their irregular and intermittent supply. This paper presents a novel hydro-accumulation system that significantly reduces energy consumption by integrating hydraulic ram pumps instead of traditional electrically powered pumps. The proposed system operates in cascade mode, where the kinetic energy of water is used multiple times through a sequence of hydraulic rams to pump water from a lower reservoir back to the upper one. Each stage of the system reuses the outflow water of the previous ram, achieving up to …

Research On Geological Complications Occurring During Drilling Operations At Uzbekneftegaz Jsc Wells, Otabek Rajabovich Eshmurodov, Komilxodja Anvarxodjayevich Raximov, Shaxnoza Hikmatullayevna Mirsaatova, Tolib Olimovich Komilov, Sherali Halloqovich Umedov

Technical science and innovation

This article presents an analysis of maintaining wellbore stability, preventing pack-off formation, stuck pipe incidents, and drilling fluid losses. A technology aimed at ensuring successful and high-quality trouble-free well drilling is analyzed and recommended. Based on data obtained from the Surkhandarya Basin fields, many wells were not drilled to the designed depth. Geophysical data from studied fields indicate that pore pressure retained in clay formations causes wellbore instability. These data also help to identify zones prone to collapse; however, the direct measurement of pore pressure in such formations remains impossible. This research was primarily conducted in the Ustyurt region, one …

Research Into Technological Features In The Curring Process Of Multilayer Polymer Composite Parts, Umidbek Dilshod Ugli Kosimov, Jonibek Kobilovich Tokhirov, Andrey Dmitrievich Novikov

Technical science and innovation

This paper examines the main technologies and mechanisms used in the curing process of multilayer thick-walled parts of unmanned aerial vehicles (UAVs) made of polymer composite materials (PCM) based on epoxy resin. The study provides a detailed analysis of the technological features of the curing process, its kinetics, and the influence of heat transfer mechanisms on the final quality of molded components. It is emphasized that due to the low thermal conductivity of PCM, temperature inhomogeneity may occur during curing, leading to defects, internal stresses, and deterioration of the mechanical properties of the product. Therefore, ensuring uniform temperature distribution throughout …

Comparative Analysis Of Gas And Mechanical Emissions From Electric Cars And Internal Combustion Engine Vehicles, Bakhtiyor Akhmatjonovich Kosimov

Technical science and innovation

This article analyzes the environmental impact of modern cars, in particular the amount of harmful substances emitted into the environment by electric cars and internal combustion engine cars, and provides scientific information on the substances that are released from cars in the form of not only gaseous emissions, but also dust particles generated by the mechanical wear of the brake system and tires. At the same time, this article also takes a scientific approach to the wear rates of brake pads and tires, their impact on environmental safety, and the level of dispersion of the microdust generated. Comparative tables have …

Intelligent Control Of Reducing Energy Consumption And Water Loss In Smart Home Systems, Hakimjon Nasriddinovich Zaynidinov, Damira Farxodovna Hodjaeva, Dhananjay Singh

Technical science and innovation

The article presents an innovative approach to developing an intelligent control system for managing temperature and water level in smart home systems. The proposed method integrates an adaptive PID controller with fuzzy logic algorithms, enabling dynamic adjustment of the PID controller coefficients in real time. The mathematical model of the system incorporates heat balance equations, differential heat transfer relations, and nonlinear models of fluid loss. The adaptive control algorithms developed within the study allow the system to effectively respond to changes in input data.

A comprehensive analysis of the membership functions is conducted, along with adaptive tuning of the PID …

Development And Characterization Of Pmma/Pvp Nanofiber-Loaded Bioactive Agents With Enhanced Breast Cancer Activity, Samar A. Salim, The British University In Egypt, Esraa Abdelazim, Marwa Abdel Aleem

Nanotechnology Research Centre

Breast cancer remains a leading cause of cancer-related mortality globally, driving the need for novel effective and less toxic therapeutic agents. This study explores the synthesis and characterization of bioactive compounds: 1-(4-methoxyphenyl)-N- (p-tolyl)methanimine (MPTI), N-(4-methylphenyl)benzamide (MPB), and 4-methyl-N-(p-tolyl)benzenesulfonamide (MTS), and their incorporation into a PMMA/PVP polymer matrix for potential anticancer applications. Morphological analysis of the PMMA/PVP-loaded agents via SEM depicts structural modifications in the PMMA/PVP nanofibrous matrix upon incorporation of the bioactive agents. The FTIR analysis of the synthesized compounds before and after loading into the 7PMMA:3PVP nanofibers reveals successful incorporation of MPTI, MPB, and MTS, with characteristic absorption bands …

Improving The Methodology Of Complex Organization Of Rural Areas Based On Gis Technologies, Anvarjon Pardaboyev

Technical science and innovation

In the world, scientific research is being conducted aimed at improving the efficiency of complex organization of rural areas by utilizing modern geographic information systems (GIS) and remote sensing data. These studies focus on shaping the land allocated to these areas, organizing their activities, and forming the basis of cartographic information. Additionally, the use of modern GIS and remote sensing data has become widespread in the complex organization of rural areas in many countries. This method stands out for its effectiveness in organizing regions today.

In our republic, comprehensive measures are being implemented to consistently develop production through structural, institutional, …

Training Stages And Algorithms Of Multilayer Neural Networks For The Control System, Abdishukurov Maqsudovich Shavkat, Xuecheng Li

Technical science and innovation

The application of neural network technologies in control systems consists of several stages. In technological object control systems, each layer of the multilayer perceptron neural networks is represented using separate transfer functions. The result of synthesizing neural network technology into control systems allows for the rapid solution of many problems. Using neural network technology, it is possible to perform many calculations. Chain rules of neural networks are added this paper. Lots of training algorithms are compared to choose better to train network. Backpropagation neural networks is seen deeply in the last page. Problems of interpolation and extrapolation are solved. Algorithms …

Utilization Of Ftir-Atr For Material Characterization And Forensic Analysis, Helmut Leodarta, Ahmed S. El-Ashwah, Punyaslok Rath, Magdy Abdelrahman, William G. Buttlar

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The growing use of chemical modifiers and additives in asphalt mixtures necessitates a reliable system for their identification and quantification, crucial for quality control, assurance, and forensic investigations. Fourier Transform Infrared (FTIR) spectroscopy offers a cost-effective method by analyzing the interaction of infrared light with chemical groups, producing distinct spectral fingerprints. This study evaluates 44 materials, including binders, warm mix additives (WMAs), rejuvenators, release agents, and concrete admixtures. It also assesses the ability of FTIR testing to identify and quantify chemical changes and aging in asphalt binders with rejuvenator addition. An Attenuated Total Reflectance (ATR) accessory was employed for practical …

Mechanical And Deformation Behavior Of Silt Reinforced With Wicking Geotextile: An Experimental Study, Yipeng Guo, Yiyong Xue, Yongjie Zhang, Wei Ruan, Yafeng Li, Xiong Zhang, Zhili Han

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Silt is widely utilized as a filling material in transportation construction, However, it frequently suffers from problems, such as excess pore water pressure buildup, settlement, and mud pumping. Wicking geotextiles have emerged as a sustainable solution by improving both drainage and reinforcement capacities, yet their optimal design parameters remain unclear. To address this gap, a series of tests were performed to investigate the effects of compaction degree, reinforcement configuration (number, spacing, position), and specimen geometry on the mechanical and consolidation of silt reinforced with wicking geotextiles. The results reveal that the failure mechanism of reinforced silt progresses through four distinct …

Reduction-Driven Mobilization Of Structural Fe In Clay Minerals With High Fe Content, Anke Neumann, Luiza Notini, W. A.P.Jeewantha Premaratne, Drew E. Latta, Michelle M. Scherer

Michigan Tech Publications

Clay minerals contain significant amounts of Fe in their alumosilicate framework, and this structural Fe can be reduced and re-oxidized, constituting a potentially renewable source of reduction equivalents in sedimentary environments. However, dissolution and/or clay mineral transformations during microbial Fe reduction contradict this concept. Here, we investigate how Fe reduction and re-oxidation affect the propensity of Fe to be released from the clay mineral structure and use selective sequential extractions in combination with Mössbauer spectroscopy. Negligible amounts of Fe were released in the sequential extraction of high Fe content clay minerals NAu-1 and NAu-2. Once aqueous Fe(II) was added as …

Harnessing Environmentally Healthy Approaches For Plastic Degradation: A Review And Future Perspectives, Marc Chojnacki

Beyond: Undergraduate Research Journal

In the face of escalating plastic pollution, innovative degradation strategies, such as enzymatic degradation, smokeless incineration technology, and biodegradable plastics, are gaining traction. This paper collates comprehensive research on these methods, assessing their environmental impact and operational feasibility. A special focus is placed on the role of technology and its capacity to spark advancements in these degradation strategies as well as to draw on specific research to understand the economic implications of these methods. At the core of this study is the exploration of potential new, inventive degradation methodologies. Through examining methods of green plastic degradation, the study aims to …

Leveraging Oxygen Mobility With Zirconia In Low-Temperature Plasma For Enhanced Methane Reforming To Syngas, Fnu Gorky, Levy Pile, Grace Jones, Apolo Nambo, Mourad Benamara, Maria L. Carreon

Chemical Engineering Faculty Publications and Presentations

Despite extensive efforts to optimize the single-step production of syngas, hydrocarbons, and oxygenates via plasma catalysis, several challenges remain unresolved. In particular, understanding the various reaction pathways is hindered by the complexity of the reactions and the diverse range of chemical products formed. In this study, our main objective is to evaluate and compare the influence of zirconia on reaction pathways, methane (CH4) and carbon dioxide (CO2) conversions (%), and syngas selectivity (%) relative to the plasma-only route. Experiments were conducted at a low radio-frequency plasma power of 50 Watts without external heating. The results demonstrated significantly enhanced conversions of …

Deployable Systems Eat, Utah State University Space Dynamics Laboratory

Space Dynamics Laboratory Publications

What Are Mechanisms?

• Moving Mechanical Assembly (MMA)

• A device that controls the movement of a deployable or other movable system of a space or launch vehicle

• Why do mechanisms exist?

• 1) Fit within launch vehicle or dispenser
• 2) Stow for launch loads
• 3) Change position or pointing once on orbit
• 4) Deploy objects

Unveiling Degradation Patterns In Dye-Sensitized Solar Cells: A Machine Learning Perspective, Ahmed Alali, Mahmoud Ashraf, Ahmad Muhammad, Sameh O. Abdellatif

Electrical Engineering

This study examines the time-dependent degradation of dye-sensitized solar cells (DSSCs) by systematically investigating several critical parameters, including TiO2 thickness, porosity, dye concentration, and iodine-based electrolyte concentration. We developed a novel figure of merit (FOM) to quantify the degradation rates, utilizing a finite element model (FEM) in COMSOL to simulate performance over time. 400 DSSC samples were fabricated, resulting in a comprehensive dataset comprising over 228,000 data points derived from experimental results and simulations. The findings reveal that PCE declines significantly over time, with an average initial efficiency of 4.0% for the DSSCs, dropping to approximately 0.5% after 360 h. …

Analyzing The Interfacial Properties Of Natural Fiber Composites, Rahul Kumar Arram

Doctoral Dissertations and Master's Theses

In response to growing environmental concerns and the urgent demand for sustainable development, the composite materials industry is increasingly challenged to balance high performance with environmental responsibility. Conventional composites, typically composed of synthetic fibers and petroleum-based resins, offer outstanding mechanical properties but are associated with significant ecological drawbacks due to their non-biodegradable nature and energy-intensive production. This has led to increased interest in the development of sustainable composites that minimize environmental impact without compromising functionality. This study presents the development of eco-friendly composites reinforced with natural bast fibers—specifically ramie and jute—through a comprehensive program of materials processing and characterization. To …

Summary Of: Immersive Modeling Of Water Banking Elicits Local Knowledge And Strategies To Get More Water To Great Salt Lake, Hadia Akbar, David E. Rosenberg

Civil and Environmental Engineering Student Research

Getting more water to the declining Great Salt Lake (GSL) is difficult. Strategies must address complex water rights, competing water needs, differing stakeholder priorities, historical legacies, lack of trust, and more arid and variable hydrology. Here we used immersive online collaborative modeling to explore water banking strategies to get more water to GSL. This 2-page brief describes the immersive modeling method, a Win-Win outcome, key results, new insights collaborators took from a model session, 2 new strategies to deliver water to GSL, and 3 next steps.

Investigating Vacuum Insulator Flashover Resistance Of Rexolite And Acrylic Before And After Applying Novel Insulator Cleaning Techniques, Ritin Joseph

Electrical and Computer Engineering ETDs

Pulsed power involves accumulating large amounts of electrical energy and releasing it instantaneously. Large pulsed power accelerators use a vacuum insulator stack to facilitate power transfer from the liquid to vacuum section. Limiting the probability of surface flashover in this setting to acceptable levels improves machine longevity and prevents energy loss. Post-shot debris deposition requires a refurbishment process to prevent deterioration of dielectric performance, though the current technique of hand-sanding is long, labor-intensive, and pose serious health hazards. I have collected flashover data on frustrum-shaped Acrylic and C-Lec Rexolite® (cross-linked polystyrene) samples using a 500-kV, 20-ns risetime pulsed power test …

A Comprehensive Review Of Software Requirements Dependencies Analysis Techniques, Nahla Mohamed, Sherif Mazen, Waleed Helmy

Iraqi Journal for Computer Science and Mathematics

The software Requirements Prioritization (RP) process is essential for producing a successful software project. Requirements are interdependent in software projects, so handling their dependency during the RP process is mandatory. Many researchers have shown that requirements dependency is challenging for large-scale systems. Extracting requirements dependency is difficult since requirements are documented in natural language. Improper handling of dependencies among requirements while prioritization can cause inaccurate prioritization results and deadlocks, which cause project delays, rework, and redesign. Many techniques have been introduced to automate the dependency analysis process among software requirements, including artificial intelligence (AI) and other logic-based methods such as …

Fixed Points Of Multi-Valued Graph Maps In Strong B-Metric, Shaimia Qais Latif, Salwa Salman Abed, Haider Ahmed Shihab

Iraqi Journal for Computer Science and Mathematics

This paper involves adopting a well-known generalization method in the branches that dealing with fixed points via weakening the suppositions. As appearing in previous sources, letting (Ω,Sb,K) be a strong b-MS, and F,H be two multi-valued maps on Ω equipped with a graph σ s.t the set of vertices of σ,Λ(σ) = Ω and the set of edges of σ, Ξ(σ) ⊆ Ω × Ω. The acceptable assupmtions have been adopted to finding a common fixed point for in Ω. …

Enhanced Detection Of Intracranial Hemorrhage: A New Hybrid Model Design Based On The U-Net Segmentation Method, Hassan F. Hassan, Hadeel K. Aljobouri, Oktay Algin

Iraqi Journal for Computer Science and Mathematics

Intracranial hemorrhage (ICH) denotes bleeding inside the skull, which can occur in or around the brain. Computed tomography (CT) has been used to detect ICH due to its high efficiency and accuracy. Nowadays, deep learning model design is introduced to allow an accurate and efficient classification of ICH in CT images. This work focused on developing U-Net-based models for the segmenting of ICH. Furthermore, the proposed model employed two transfer learning models, MobileNet and Xception, as the backbones of the U-Net topology. This approach aims to establish metrics that improve ICH treatment through precise segmentation techniques. A free dataset from …

Retracted: A Novel Benchmarking Framework For Selecting The Best Deep Learning Model Diagnosing Covid-19 Based On New Development For Dual Mcdm Methods, Mahmood M. Salih, Yousif Raad Muhsen, M.A. Ahmed, Reem D. Ismael, Moceheb Lazam Shuwandy, Z.T. Al-Qaysi

Iraqi Journal for Computer Science and Mathematics

COVID-19 was diagnosed using deep learning models by a group of studies. Evaluating and benchmarking these models are essential to achieving the most suitable model for diagnosing coronavirus. Objective: In this investigation, we offer an inclusive valuation of several deep learning models to detect the maximum appropriate and active model which gratifies doctors' requirements and assessment criteria. Method: This study combines Fuzzy decision by the opinion score method (FDOSM) and Fuzzy-Weighted Zero-Inconsistency (FWZIC). According to the advantage of Trapezoidal Intuitionistic fuzzy, we developed FWZIC into Trapezoidal Intuitionistic fuzzy named (TrIF-FWZIC) for weighting criteria and FDOSM into Trapezoidal Intuitionistic fuzzy FDOSM …

Leveraging Machine Learning For Accurate Prediction Of Nba Player Salaries, Ye Cheng, Yan Song, Mingqi Wang

Iraqi Journal for Computer Science and Mathematics

Basketball players in the NBA are renowned for their talent, athleticism, and commitment to the game. NBA players may make enormous sums of money; however, they vary greatly. Rookie agreements begin at a lower price and go up following performance. NBA players’ pays are influenced by several factors. Because they influence games and the success of the club, exceptional players fetch larger compensation. This study employs Machine Learning (ML) techniques, including Lasso Regression and Random Forest Regression (RFR) models to analyze wage trends, enhanced by the Slime Mould Algorithm (SMA) and Artificial Rabbit Optimization (ARO) for accuracy. The goal is …

الأمن السيبراني والذكاء الاصطناعي: حلول لإدارة أزمات البنية التحتية الرقمية, عبدالله سعد الغامدي

Journal of the Association of Arab Universities for Research in Higher Education مجلة اتحاد الجامعات العربية للبحوث في التعليم العالي

في ظل التحول الرقمي المتسارع، أصبحت إدارة الأزمات التقنية تحديًا استراتيجيًا يستوجب تبني حلول مبتكرة للحفاظ على استمرارية الأعمال وحماية البنية التحتية الرقمية. ناقشت هذه الورقة دور الأمن السيبراني والذكاء الاصطناعي في تعزيز قدرات المنظمات والجهات على التنبؤ بالأزمات والاستجابة لها بفعالية ، وتعتمد على منهجية تحليلية تجمع بين دراسة الحالات الواقعية وتحليل البيانات باستخدام تقنيات التعلم العميق Deep Learning ونظم الأمن السيبراني المتقدمة مثل SIEM وSOAR ومدى الاستفادة من دمج هذه التقنيات لتحسين زمن الاستجابة وتقليل معدل الهجمات الناجحة، مع التدليل على أمثلة من المملكة العربية السعودية والتي سجلت أكثر من 38 مليون محاولة هجوم سيبراني في عام 2024. …

Green Energy Production Using A Hydro-Generator In An Underground Mine Water Pumping Station – Case Study, Andrzej Chmiela, Beata Barszczowska, Eugeniusz Krause, Arkadiusz Kulawik, Adam Smolinski

Journal of Sustainable Mining

The paper analyses the experience of almost one year of production of “green” electricity by a hydro-generator using a constant water drop in the pits of mine water pumping stations. The main technical, economic and environmental parameters obtained by the applied technical and organisational system are presented. Equipping the mine water pumping station with a hydro-generator proved to be a good investment. The investment offers a relatively low risk with a relatively low initial outlay and a relatively short payback period of about 4 years. The innovative use of typical but modern elements in an atypical operating environment has not …

Machine Learning Techniques For Optimizing The Efficiency And Costs Of Drill Steel In Sandstone And Granodiorite: A Case Study In Peru, Marco Cotrina, Jairo Marquina, Jose Mamani, Solio Arango, Eusebio Antonio, Eduardo Noriega, Teofilo Donaires, Dominga Cano

Journal of Sustainable Mining

This research aims to optimize the efficiency and costs of drilling steel in sandstone and granodiorite rocks using machine learning techniques in a Peruvian mine. Predictive models, including random forest (RF), XGBoost (XGB), decision trees (DT), and artificial neural networks (ANN), were applied, along with optimization algorithms such as genetic algorithm (GA), particle swarm optimization (PSO), ant colony optimization (ACO), and simulated annealing (SA). A dataset of 705 entries was analyzed, focusing on drill bit wear, percussion and rotation pressures, and cost per meter drilled. Model performance was evaluated using R², RMSE, MAE, and MAPE. The ANN model …

Assessing The Living Conditions Of Mining-Induced Resettled Persons: The Case Of Ahafo South Resettlement Communities, Ghana, Jonathan Zinzi Ayitey, Mustapha Okyere, Frank Gyamfi-Yeboah

Journal of Sustainable Mining

This study examines the living conditions of mining-affected persons in the Ahafo South Mining Communities in Ghana using Cernea’s Impoverishment Risks and Reconstruction (IRR) model. Employing a case study design, data for the study was obtained through a combination of semi-structured interviews and close-ended questionnaires administered to ninety (90) respondents in the Ntotroso and OLA resettlement communities in the Asutifi North District, Ghana. The results show a complex mix of outcomes of mining-induced displacement and resettlement of the resettled population. While an analysis of resettlement impacts found a high level of satisfaction among the resettled population with housing provision, road …

Damage Assessment In The Case Of Post-Mining-Induced Seismicity: How To Use And Adapt Macroseismic Intensity Scales?, Johanna Vieille, Caterina Negulescu, Pierre Gehl, Pascal Dominique, Romain Guidez, Grzegorz Mutke

Journal of Sustainable Mining

Following coal mine closures, the impact of flooding on underground mining excavations and on the geomechanical stability of the rock mass has the potential to trigger superficial earthquakes. The generated vibrations may induce damages to the surface infrastructures. Therefore, they represent a significant source of concern for the population. Nowadays, seismic risk assessment procedures in Europe usually build upon the EMS-98, which has been developed for natural tectonic earthquakes. This study aims to investigate the applicability of EMS-98 to seismic events induced by post-mining context while comparing it to a new intensity scale MSIIS-22 adapted to very low intensities from …

Rockfill Trenching For Enhancing Overburden Dump Height On Weak Soil Strata, Rahul Shende, Srinivasan Venkatraman, K. Athiveera Pandian, Shubham Jain, Anjan Patel

Journal of Sustainable Mining

Dumping waste on weak soil layers can destabilize the dump, compromising its capacity for material disposal. This study focuses on the stability of dumps placed over weak black cotton (BC) soil strata in central India, with an emphasis on assessing the effectiveness of rockfill trenches (RFT) in improving dump stability. A combined approach using nine limit equilibrium methods (LEM) and the finite element method (FEM) was employed for analysis. The results demonstrate that dump stability is significantly influenced by the presence of weak strata under both dry and wet conditions when the dumping height is increased. The study also reveals …