Digital Commons Network^™

Determining Stability Of Nonlinear Control Systems Via Lyapunov's Method., John Joseph Komo

Masters Theses

"The problem undertaken in this thesis is to present Lyapunov's method of stability as i t applies to control systems and to use it in the stability analysis of nonlinear control systems. The variable gradient method of generating Lyapunov functions is presented since this seems the best general procedure for obtaining Lyapunov functions. Also, the integration of matrices method is presented as a comparison. ii

Procedures for the use of the variable gradient method and the integration of matrices method are written and several examples are used to illustrate these procedures.

It is concluded that Lyapunov's method is very definitely …

Test 841: Oliver 1600, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

A Study Of A Method For Determining Properties Of Metals At High Strain Rates., Warren Heidbreder

Masters Theses

"An experimental method has been developed for determining the tensile and other physical properties of metals under high loading rates. Experimental equipment was designed, fabricated and tested. It was desirable to keep the equipment simple and inexpensive so that it could be used by operators Lacking experience in electronics and high-speed photography which are required for some of the more sophisticated methods now in use. The energy for pulling the specimens is supplied by smokeless gun powder. The firing of a cartridge into a closed cylinder with movable piston accomplishes the breaking of the specimen. A record of the time, …

Test 837: Allis-Chalmers Series Ii D15 (Gasoline), Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT GENERAL CONDITIONS East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers. PREPARATION FOR PERFORMANCE RUNS The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

Non-Ferrous Metal Mining And Smelting In Australia, H. R. Hanley

Missouri School of Mines and Metallurgy Bulletins

No abstract provided.

Permeability And Adsorbed Flow Of Carbon Dioxide And Propene Through Porous Silica., Jorgen Lovland

Masters Theses

"It has been known for over a century that gases diffuse through some porous barriers at a rate inversely proportional to the square root of the molecular weight. The difference in diffusion rate can obviously be used to separate gases with different molecular weight. Since other methods for separation like distillation and adsorption usually are simpler and cheaper, separation by gaseous diffusion has found few practical applications. One notable exception is the separation of the gaseous hexafluorides of u²³⁸ and u²³⁵.

Later investigations on the permeation of gases through porous materials have shown that when gases diffuse …

A Study Of The Angular Velocity In A Liquid Induced By A Vortex In An Emptying Container, James Paul Hartman

Masters Theses

"Previously a limited amount of investigation has been done to describe the rotational motion of fluid in a draining tank. To date tank design has been based on trial and error, since the physical mechanisms of actual draining have not been recognized. This investigation has been made to develop a technique for the measurement of the motion of the fluid during the draining process and to present the results of the observed surface velocity of the liquid as a function of depth of fluid and its distance from the center of the vortex core. Many previous investigators of vortex behavior …

An Investigation Of Optimum Journal Bearings., Kulin Purshotam Maskai

Masters Theses

"Not much has been done towards calculating the "Optimum Bearing" from the point of view of maximum load capacity or minimum friction. It has been found that there 1 is not much difference in the "Optimum Bearing" proportions, as calculated, considering either minimum friction or maximum load capacity

Journal bearings are commonly used and they play a very important role in reducing friction and wear. Engineers use past experience in choosing a bearing for the given conditions. A bearing design can be obtained if 'Optium Bearing' proportions are calculated as suggested by Kingsbury (1) in his article on 'Optium Conditions …

Zinc Sulfide-Sulfate Reaction Pressures, William L. Hallerberg

Masters Theses

"A static manometric method was used to find the equilibrium reaction pressure as a function of temperature for the reaction:

11 ZnSO₄ + ZnS → 4 (ZnO·2ZnSO₄) + 4 SO₂

From the reaction pressures, the standard free energy of the reaction was found to be:

ΔF⁰ = + 51,320 - 36.68 T

Using thermodynamic data for ZnSO₄, ZnS and SO₂ the standard free energy of formation of the basic salt ZnO·2ZnSO₄ was found to be:

ΔF⁰ = - 377,000 - 65.9 T cal/mole

in the temperature range 350 to 420⁰ C.

Above …

A Study Of The Relationships Between The Structure And The Consolidation And Swell Characteristics., Victor Foute Spruill

Masters Theses

"This paper reports the experimental results of an investigation of the relationships between the consolidation and swell characteristics of a cohesive soil and the structure of the soil. Consolidation and swell tests were run on samples prepared at their liquid limits in order to permit the effects of structure to show up in the results. The series of samples tested consisted of Putnam Clay Soil with (1) 2% sodium carbonate added, (2) no admixture, (3) 1% calcium hydroxide, and (4) 4% calcium hydroxide. Determinations were made of the per cent consolidation and per cent swell, decrease and increase in height …

Dissolution Rates Of Zone Refined Iron And Steel In Hydrochloric And Sulfuric Acids And In Sodium Chloride Solutions., Gary E. Welch

Masters Theses

"Dissolution rates for two carbon steels were deter­ mined in four concentrations of sulfuric acid at five temperatures and in four concentrations of hydrochloric acid at four temperatures.

No general relationship was found for the variation in activation energies in sulfuric and hydrochloric acid. An explanation of the difference in the reaction rates and a possible explanation of the activation energy is presented on the basis of chunk formation.

The results of this investigation indicate an electrochemical control mechanism for the dissolution reaction of steel in acid solutions.

Results of dissolution rate studies in sulfuric and hydrochloric acid solutions and …

Heat Transfer Through A Honeycomb Sandwich Panel, Jayantilal J. Darji

Masters Theses

"Progress brought about by human ingenuity and technological developments has been always accompanied by fresh problems, the successful solution of which enables still further progress.

The recent developments in space exploration and exploitations are astounding. The coming years are likely to bring forth many remarkable achievements. Except for several engineering problems encountered with these developments the pace of progress is to study the heat transfer from honeycomb sandwich panels as an outer skin of high performance flight vehicles. The quantity of heat transferred through the panel is important in study of such vehicles, and methods or equations for determining this …

Economical Span Length Ratios For Four Span Continuous Girder Bridges., C. C. Jogani

Masters Theses

"This study presents the results of an analysis of maximum movement in a four span continuous bridge with total span length of 100¹, 200¹, 300¹, and comparison with maximum moment on three span continuous bridge with total span length of 200¹ and 300¹. The four span continuous bridge was found to have a maximum moment which was 46% that of the three span bridge at both 200¹ and 300¹ length"-Abstract p. ii

Hydraulic Transportation Of Coal In Open Flumes., Nallapu Narayan Reddy

Masters Theses

"The objective of this study is to design a simplified form of hydraulic transportation system using open-flumes and operated by gravity in pitching coal seams. This type of system is to be used in conjunction with mining by hydraulic methods where the water used for the extraction of coal can also be used for the loading and transport functions"--Introduction p. 1

The Effect Of Haunched Members On Vierendeel Trusses, Rashmikant D. Parikh

Masters Theses

"The purpose of this study was to analyze a Vierendeel Truss and determine the effect of haunches on moments. Loads were applied at the interior panel points in sequence. The classic slope-deflection method with coefficients taken from a table of frame constants (8) was used for the analysis.

In this investigation, one effect of haunches was determined to be the distribution of moments more evenly throughout the structure. Also, they insure rigidity of the joints and increase architectural flexibility"--Abstract, page ii.

Viscosities Of Various Binary Non-Polar Gaseous Mixtures., Gerald Lee Stevenson

Masters Theses

"Viscosity is an important physical property involving the transport of momentum in a fluid. Momentum is transferred within a fluid under an existing velocity gradient as the driving force. Since momentum transfer is actually attained by the dynamic interaction between particles of mass, a description of molecular interaction is essential in order to accurately predict the viscosity of a fluid. Temperature affects fluid viscosity by increasing the kinetic energy of the fluid system and thus the frequency by which molecules are involved in interaction. There have been many theoretical studies made concerning the intermolecular potential energy statements which serve as …

Behavior Of Clay Under Compaction By Vibratory Rollers., Glenn R. Taylor

Masters Theses

"This thesis presents an analysis of the behavior of a lean clay when compacted by commercial vibratory rollers using the results of field investigations conducted by the U. S. Army Engineer Experiment Station, Vicksburg, Mississippi. Conclusions reached indicate that a lean clay soil will behave substantially the same under compaction by a vibratory roller as it does under other conventional methods of field compaction. The relationship of amplitude to the density and moisture content is also examined in this paper with the conclusion that the variations in amplitude of a vibratory roller is not significant as a measure of the …

Methods For The Determination Of The Thermal Conductivity Of Solids., A. M. Sivadasan

Masters Theses

"The thermal conductivity of materials is of considerable practical and theoretical interest. Numerous publications on this subject have been presented with widely varying approaches and applications being made. Perhaps for no other thermal property are the published results so widely divergent and subject to such great uncertainty, particularly at high temperatures. This is partly due to unsolved difficulties in measurement, but perhaps to an even greater extent to the fact that the thermal conductivity of a material depends on its physical characteristics as well as some environmental factors such as humidity and temperature. In the case of metals or alloys, …

Swelling Properties Of Putnam Soil, Oscar M. Palma

Masters Theses

"Volume change of Putnam soil under different moisture contents and the swelling pressure developed by the soil at the same moisture contents were investigated using standard test procedures.

The theory of one dimensional consolidation of Terzaghi was reviewed as well as the literature on swelling and swell pressure.

It was found that swell depends mainly on the initial water content, while swelling pressure depends mainly on the dry density of the soil"--Abstract, page ii.

The Design, Construction, And Calibration Of A Hydrodynamic Journal Bearing Testing Machine., John H. Roberts

Masters Theses

"The purpose of this investigation was to design, construct, and calibrate a journal bearing testing apparatus. The design, construction, and operation of the apparatus are described.

Two bronze bearings with length to diameter ratios of 1.0 and 0.5 were tested using a gravity oil reed system. The speed and the location of inlet oil supply were varied, and the resulting coefficients or friction, oil flow rates, outlet oil temperatures, bearing shell temperatures, and eccentricities of the bearings were determined. These results were evaluated and compared with theoretical solutions.

The results compared favorably with the theoretical solutions and substantiated the use …

A Thermodynamic Study Of The Molybdenum-Sulfur System At 1100⁰C, Seth C. Schaefer

Masters Theses

"A static method was used to determine equilibrium sulfur pressure for molybdenum-sulfur mixtures at 1100°C.

The results obtained were:
(1) The molybdenum disulfide phase was stable in a sulfur pressure range of 1.023 x 10^-5 to 6.026 x 10^-1 atmospheres. A range of non-stoichiometry from MoS_2.00 to MoS_2.22 was determined under these conditions.
(2) The upper limit of sulfur content of molybdenum sesquisulfide (Mo₂S₃) is nearly stoichiometric.
(3) The extent of solid solution of sulfur in molybdenum is approximately 1.5 atomic % (0.5 wt %).
(4) Molybdenum sesqu-isulfide (Mo₂S_{3 …}

A Study Of The Solubility Of Gold In Aluminum And The Extent Of The Al₂Au Phase., Kuldip Singh Chopra

Masters Theses

"The lattice constant of pure aluminum (99.998%) at 25° C 0 was determined to be 4.04953 A and the limit of solubility of gold in aluminum at 58O° c was found to be about o.4 weight percent gold. The minimum of the lattice constant was observed at O.75 weight percent gold. No change in the lattice constant with time was found.

The Al₂Au phase has a range from 77.66 to 78.94 weight percent gold with the theoretical composition of Al₂Au nearly in the middle of the phase. The thermal coefficient of expansion, the density and the …

Influence Of Porosity On The Fracture Stresses Of Electrical Porcelain., Edward Anton Snajdr

Masters Theses

"Spherical pores were induced in a typical quartz electrical porcelain body. Three levels of pore size and four levels of concentration were studied. Large strength sample sizes were employed using a three-point loading and diametral loading method. Data for induced quartz particles is also included"--Abstract, p.ii

The Construction And Evaluation Of A Small Scale Laboratory Fermentor For Batch And Continuous Studies., Robert Murray Logan

Masters Theses

"The purpose or this investigation was to design and construct a suitable apparatus for the aerobic culture or microorganisms to be used for preliminary batch studies and eventually, continuous fermentations.

The general design of the apparatus was patterned after small scale equipment described in the literature. Construction or the apparatus was carried out in the shop of the Department of Chemical Engineering and Chemistry. All of the necessary machining was done by the author.

The aeration-agitation system was evaluated by the use or the sulfite oxidation rate determination. The oxygen transfer rate provided by the apparatus was round to be …

Effect Of Stiffness Ratio On Stresses In A Rigid Frame., James Juh-Ling Tang

Masters Theses

"The elastic center method has been used to analyze several rigid frames with different geometric configurations and with component members of variable cross-sections. The basic approach is to divide the frame into small segments to solve this problem. From this analysis the best frame which is in the range of an economical design may be obtained for a given loading condition"--Abstract, p.2

Compensator Design For Unity Feedback Systems On The Digital Computer., Ping Liang

Masters Theses

"In control systems engineering it is frequently necessary to compensate a fixed plant whose transfer function cannot be changed. Usually the characteristics of the resulting system are established in terms of steady state and transient performance specifications. Generally it is necessary to insert a compensator which permits the system to satisfy the specifications as well as to provide an absolutely stable system.

In this thesis a method is developed to determine the transfer function of the compensator. Each system performance specification can be expressed in a differentiable inequality form composed of the system closed-loop gain, zeros, and poles. First, the …

Linear System Transfer Function Identification, Tuh-Kai Koo

Masters Theses

“An approach using a high speed special purpose digital computer to identify the transfer function of a linear system is presented in this thesis. The data for computation are obtained by measuring the system response and its derivatives periodically with a periodic test signal (impulse) input.

The order of the system is first determined by evaluating the rank of a Hankel matrix. Then, the transfer function is determined by solving two sets of system equations.

Theoretical analysis is emphasized in the study. Two examples are given for the purpose of illustrating the theory

Small Signal Gain Analysis For A Seven Cavity Klystron Amplifier., William E. Hord

Masters Theses

"The problem was to find a suitable method of using the digital computer to calculate the small signal gain characteristics of a seven cavity klystron amplifier. Background material relevant to the problem was reviewed. The differential equations for small signal conditions in a gridless gap klystron were developed. These equations were then solved and put in a matrix form suitable for digital computer analysis. Suggestions for additional development were proposed"--Abstract p. ii

Pattern Calculations On A Loaded Spiral Antenna., Jose Briceno

Masters Theses

"The purpose of this thesis is to calculate and p lot the radiation patterns o f a ferrotron-loaded spiral antenna made of semicircles. In particular, this work is confined to a balanced spiral free to radiate in all directions.

The current distribution used in the evaluation of the vector potential is taken from a synthesized current obtained from experimental information on a ferrotron-loaded spiral antenna at a frequency of operation of 200 MC.

The calculated patterns of the spiral antenna are in general single lobed in a direction perpendicular to the plane of the antenna. The beamwidth varies from 62° …

Infrared Modulation Using The Field-Effect Properties Of Germanium., Lloyd E. Brunkhorst

Masters Theses

"The absorption of infrared radiation, by free carriers in germanium, has been used to amplitude modulate infrared radiation. In the experiment, a space charge layer consisting of free carriers is established at the inner surface of a germanium sample by using the field-effect technique. Infrared radiation of a wavelength to which the germanium is transparent is then Internally reflected from this surface. The infrared radiation passes twice through the space charge layer for each internal reflection. With each pass through the space charge layer, the amplitude of the transmitted infrared is decreased. Amplitude modulation of the transmitted infrared is accomplished …