Digital Commons Network^™

An Introduction To The Comparison Of Seismocardiography And Phonocardiography, Anna C. Voyatzoglou

Honors Undergraduate Theses

The intent of this thesis is to lay groundwork for examining the relationship between seismocardiography (SCG) and phonocardiography (PCG). Both are methods of measuring and describing heart mechanical function. SCG is described as chest vibrations while the heart beats, and PCG is described as acoustic chest surface signal believed to represent the heart valves opening or closing. SCG and PCG have both been used separately in clinical and research settings, but there is currently no clear comparison between the two. Therefore, there has been no way at the present to understand how one signal might inform the other. This study …

Design And Development Of Medical Devices For Multifaceted Applications, Madisyn Messmore

Honors Undergraduate Theses

The fields of biotechnology and biomedical sciences are rapidly evolving and involve the constant growth of knowledge. As a consequence, engineering design has to also remain at the cutting edge in order to not inhibit the growth of these fields. This study focuses on engineering design and analysis as it pertains to the field of biotechnology, at every step of the engineering process. More specifically, how the engineering design and analysis approach can assist in solving medical problems relating to bone diseases and biomaterials. The first part of the study focuses on a project to design and manufacture a novel …

Self-Powered Microgravity Resistance Exercise With Soft Pneumatic Exoskeletons, Aislinn Marcee, Emma Treadway

Engineering Faculty Research

As preparations continue towards sending humans on a 3-year mission to Mars, space programs must find solutions to combat muscular atrophy experienced by astronauts during extended time in microgravity. One method currently used to combat muscle deterioration is daily resistance training sessions using an apparatus like the ARED or CEVIS exercise devices, but these daily exercise sessions are not expected to be enough to protect the muscles during longer missions. To help combat muscular atrophy, we propose self-resistance outside of the daily exercise sessions implemented through soft pneumatic exoskeletons that could be integrated into astronauts’ suits, augmenting the formal exercise …

Complex Quantum Contagion: A Quantum-Like Approach For The Analysis Of Co-Evolutionary Dynamics Of Social Contagion, Ece Mutlu

Electronic Theses and Dissertations, 2020-2023

Modeling the dynamics of social contagion processes has recently attracted a substantial amount of interest from researchers due to its wide applicability in network science, multi-agent systems, information science, and marketing. Unlike in biological spreading, the existence of a reinforcement effect in social contagion necessitates considering the complexity of individuals in the systems. Although many studies acknowledged the heterogeneity of the individuals in their adoption of information (or behavior), there are no studies that take into account the individuals' uncertainty during their decision-making despite its theoretical and experimental evidence in behavioral economics, decision science, cognitive science, or multi-agent systems. This …

Development And Characterisation Of A Whole Hybrid Sol-Gel Optofluidic Platform For Biosensing Applications, Emma Mchugh, Graceson Antony, Arun Kumar Mallik, Alicja Kaworek, Declan Mccormack, Brendan Duffy, Mohamed Oubaha

Articles

This work outlines, for the first time, the fabrication of a whole hybrid sol-gel optofluidic platform by integrating a microfluidic biosensor platform with optical waveguides employing a standard photolithography process. To demonstrate the suitability of this new hybrid sol-gel optofluidic platform, optical and bio-sensing proof-of-concepts are proposed. A photoreactive hybrid sol-gel material composed of a photopolymerisable organically modified silicon alkoxide and a transition metal complex was prepared and used as the fabrication material for the entire optofluidic platform, including the optical waveguides, the sensing areas, and the microfluidic device. The most suitable sol-gel materials chosen for the fabrication of the …

The State Of The Art Of Information Integration In Space Applications, Zhuming Bi, K. L. Yung, Andrew W.H. Ip., Yuk Ming Tang, Chris W.J. Zhang, Li Da Xu

Information Technology & Decision Sciences Faculty Publications

This paper aims to present a comprehensive survey on information integration (II) in space informatics. With an ever-increasing scale and dynamics of complex space systems, II has become essential in dealing with the complexity, changes, dynamics, and uncertainties of space systems. The applications of space II (SII) require addressing some distinctive functional requirements (FRs) of heterogeneity, networking, communication, security, latency, and resilience; while limited works are available to examine recent advances of SII thoroughly. This survey helps to gain the understanding of the state of the art of SII in sense that (1) technical drivers for SII are discussed and …

Biom 4730 / Mech 4365: Biomaterials (Syllabus), Joel D. Bumgardner

Biomedical Engineering Syllabi Archive

Course Description: Synthetic materials and their interaction with the physiological environment; methods to design and study materials that are compatible with natural tissue.

Bio-Inspired Sutures: Using Finite Element Analysis To Parameterize The Mechanical Response Of Dovetail Sutures In Simulated Bending Of A Curved Structure, Melissa M. Gibbons, Diana A. Chen

School of Engineering: Faculty Scholarship

Many animals have protective anatomical structures that allow for growth and flexibility; these structures contain thin seams called sutures that help the structure to absorb impacts. In this study, we parameterized the stiffness and toughness of a curved archway structure based on three geometric properties of a suture through finite element, quasi-static, three-point bending simulations. Each archway consisted of two symmetric pieces linked by a dovetail suture tab design. The three parameters included suture tab radii (1–5 mm), tangent lengths (0–20 mm), and contact angles (0–40◦). In the simulations, a steel indenter was displaced 6.5 mm to induce progressive tab …

Accessing 3d Data, Francesca Albrezzi, John Bonnett, Tassie Gniady, Heather Richards-Rissetto, Lisa Snyder

Department of Anthropology: Faculty Publications

The issue of access and discoverability is not simply a matter of permissions and availability. To identify, locate, retrieve, and reuse 3D materials requires consideration of a multiplicity of content types, as well as community and financial investment to resolve challenges related to usability, interoperability, sustainability, and equity. This chapter will cover modes, audiences, assets and decision points, technology requirements, and limitations impacting access, as well as providing recommendations for next steps.

Castor Oil Conversion To Biodiesel: A Process Simulation Study, Islam M. Al-Akraa

Chemical Engineering

No abstract provided.

Agri-Food Waste Reduction And Utilization: A Sustainability Perspective, Akinbode A. Adedeji

Biosystems and Agricultural Engineering Faculty Publications

As the human population edges closer to nine billion, we must explore how we can sustainably use Earth’s limited resources. Current agricultural production and food processing create significant amounts of wastes that have drastic effects on the environment, on the cost of production, and on human health and well-being. About a third of these wastes are produced domestically, as well as from agricultural production and food processing, and it often constitutes a disposal problem, although it contains many carbon-based materials (proteins, lipids, carbohydrates, micronutrients, bioactive compounds, and dietary fibers) that can be converted into useful value-added products. Converting these wastes …

Maize Response To Coupled Irrigation And Nitrogen Fertilization Under Center Pivot, Subsurface Drip And Surface (Furrow) Irrigation: Soil-Water Dynamics And Crop Evapotranspiration, Ali T. Mohammed, Suat Irmak

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Determination of crop evapotranspiration (ETc) and root zone soil-water dynamics/distribution coupled with nitrogen (N) management strategies is important for effective management of agricultural fields for enhancing production efficiency. However, limited data and knowledge exist that sufficiently inform how soil-water dynamics and ETc response may vary with coupled irrigation levels and different N application timings under different irrigation methods. Extensive field experiments were conducted in 2016 and 2017 under center pivot (CP), subsurface drip irrigation (SDI), and furrow irrigation (FI) at full irrigation treatment (FIT), 80% FIT, 60% FIT, and rainfed treatment (RFT) with N application timing treatments of traditional N …

Swosu Research And Scholarly Activity Fair 2022, Swosu Office Of Sponsored Programs

SWOSU Research and Scholarly Activity Fair Programs

On behalf of Southwestern Oklahoma State University, welcome to the Thirtieth Research and Scholarly Activity Fair! We are proud to host students and faculty from universities and community colleges from across the state at this meeting of scholars. Research and scholarly activity ranging from Business Administration, Education and Professional Studies, Fine Arts and Design, Liberal Arts, and Mathematics and Science.
.
.
.

Sincerely, SWOSU Office of Sponsored Programs and URSAC

Transdermal Drug Delivery Systems: Analysis Of Adhesion Failure, Zachary Brooks, Tushar Goswami, Amy Neidhard-Doll, Tarun Goswami

Biomedical, Industrial & Human Factors Engineering Faculty Publications

The most critical component of the TDDS is the adhesive, which is responsible for the safety, efficacy and quality of the patch. For drug delivery to successfully occur, the patch must adhere to the surface of the contact area. If a patch has inadequate adhesion, it is likely to fall off before the entire delivery period has been satisfied, leading to risks for the patient and others who may encounter the patch. Despite the critical concerns associated with the adhesive properties of the patches, the adhesion quality and failure mechanisms have not been fully studied. If certain molecules encounter the …

Effect Of The Extended Rigid Flapping Trailing Edge Fringe On An S833 Airfoil, Hongtao Yu, Zifeng Yang

Mechanical and Materials Engineering Faculty Publications

A 2D numerical simulation was conducted to investigate the effect of an extended rigid trailing edge fringe with a flapping motion on the S833 airfoil and its wake flow field, as an analogy of an owl’s wing. This study aims to characterize the influence of the extended flapping fringe on the aerodynamic performance and the wake flow characteristics downstream of the airfoil. The length (Le) and flapping frequencies (fe) of the fringe are the key parameters that dominate the impact on the airfoil and the flow field, given that the oscillation angular amplitude is fixed at 5◦. The simulation results …

Reciprocal Regulation Of Transketolase-Like 1 And Hypoxia-Inducible Factor 1 Alpha In Metabolic Reprogramming And Growth Of Diffuse Midline Glioma, H3 K27m-Mutant, Christopher Andrew Waker

Browse all Theses and Dissertations

Diffuse midline glioma, K27M-mutant (DMG) are intractable brain tumors, primarily occurring in the pediatric and adolescent population. Patients have a median survival of less than one year after diagnosis. A lack of therapeutic targets has been a barrier to improvement in patient survival. Irradiation therapy improves symptoms while chemotherapy and surgical intervention, for the most part, have not yet demonstrated utility for treatment. DMG are characterized by a histone H3 mutation that results in the genome-wide loss of epigenetic-repressive marks on K27 and is associated with the misexpression of genes, like Cancer/Testis antigens. A member of this group, transketolase-like 1 …

Advances In Chemotactic And Non-Chemotactic Bioremediation Of Water: A Comprehensive Review, Sheetal Pardeshi, Prafulla Shede

Applied Environmental Research

Pollution has reached to a critical threshold affecting the climate and diversity of the planet Earth. All global authorities have included pollution control in their agenda for near future. Most of the environmental research nowadays is focused on removing waste generated by anthropogenic activities, may it be solid, liquid or gaseous waste. Bioremediation is believed to be the most eco-friendly approach for reducing or removing pollutants contaminating different matrices of the environment. There are various methods covered under the umbrella term of bioremediation. Chemotaxis-mediated bioremediation attracted attention of several research groups since early decade of twenty first century due to …

Soil Contamination And Risk Assessments On Selected Dumpsites Within The Basement Complex And Sedimentary Formations Of Ogun State, South-Western Nigeria, Akintayo O. Ojo, Oluwaseun T. Olurin, Oluseyi O. Adeleke

Applied Environmental Research

The concentrations of inorganic elements in soils of Saje, Ita-Oshin, Premier, and Oke-Diya dumpsites were determined using an X-Ray Fluorescence spectrometer to assess the soil quality through chronological changes with depths. A soil core sampler collects 56 samples at 20, 40, 60, and 80 cm depths. Saje showed high mean concentrations of Ca, K, Fe, Rb, and Ti at all depths, while Oke-Diya revealed high mean concentrations of Ca, K, Fe, Rb, Ti, Mn, Zn, V, Cr, and Ni at all depths. These concentrations were in a closed range suggesting a build-up of elements in the soil profiles. Oke-Diya had …

Occurrence Of Microplastics In The Asian Freshwater Environments: A Review, Farah Akmal Idrus, Noradriena Mohd Fadhli, Mohd Nasarudin Harith

Applied Environmental Research

Microplastics pollution has become a worldwide common problem. Despite the growing numbers in researches regarding the microplastics, the understanding of microplastics in the freshwater environment are still less. This paper overviews the present knowledge and findings on the occurrence of microplastics in water and sediment of the freshwater environments in Asia. The review also covers the size distribution, polymers, morphological characteristics and sources of microplastics to the freshwater systems. Perspective of the adsorption of heavy metals on the microplastics to the freshwater systems are also discussed in this review.

Ecological And Human Health Risk Assessment Of Heavy Metals By Consuming The Aquatic Plant Species Near An Electronic Waste Open Dumpsite In Thailand, Thitima Parkpoom, Somsak Intamat, Uraiwan Phoonaploy, Lamyai Neeratanaphan

Applied Environmental Research

Heavy metals from electronic waste (e-waste) accumulate in the environment and can affect human health. The purpose of this study was to determine As, Cd, Cr and Pb concentrations in water, sediment and three species of edible aquatic plants (Ottelia alismoides, Ipomoea aquatic and Marsilea crenata) near an e-waste open dumpsite. Samples were collected from six sampling points surrounding an e-waste open dumpsite and heavy metal concentrations were analyzed by inductively coupled plasma optical emission spectrometry (ICP-OES). Bioaccumulation factors (BAFs), estimated daily intake (EDI), hazard quotient (HQ), hazard index (HI) and carcinogenic risk (CR) were evaluated in …

Assessing Vegetation Cover Change Using Remote Sensing: Case Study At Binh Duong Province, Vietnam, Nguyen Thi Huyen, Le Hoang Tu, Le Truong Ngoc Han, Vuong Thi Thuy, Dang Nguyen Dong Phuong, Nguyen Kim Loi

Applied Environmental Research

This study aims to present the application of remote sensing in monitoring vegetation change in Binh Duong Province, Vietnam. The study used Landsat 5 images in the year 2010 and Landsat 8 images in the years 2015 and 2020 to investigate the area of vegetation. The maximum likelihood classification method (MLC) was used to classify land cover and an accuracy matrix was computed to validate the classification results. The references data were collected to support classification and accuracy assessment processes including land use maps in 2010, 2015, and 2020. In addition, collected field points and UAV (unmanned aerial vehicle) in …

Indoor Air Quality Through The Lens Of Outdoor Atmospheric Chemistry, Jonathan P.D. Abbatt, Douglas B. Collins

Faculty Contributions to Books

Outdoor atmospheric chemistry and air quality have been the topic of research that intensified in earnest around the mid-20^th century, while indoor air quality research has only been a key focus of chemical researchers over the last 30 years. Examining practices and approaches employed in the outdoor atmospheric chemistry research enterprise provides an additional viewpoint from which we can chart new paths to increase scientific understanding of indoor chemistry. This chapter explores our understanding of primary chemical sources, homogeneous and multiphase reactivity, gas-surface partitioning, and the coupling between the chemistry and dynamics of indoor air through the lens of …

Improving Urban Resilience And Sustainability Via Multi-Scale Urban Food-Energy-Water-Waste Nexus Analysis, Andrea Valencia Marin

Electronic Theses and Dissertations, 2020-2023

Urban sustainable development requires an in-depth and holistic understanding of the complex Food-Energy-Water-Waste (FEWW) nexus facing population growth, climate change, economic development, and pollution control. Following the United Nations (UN) 17 Sustainable Development Goals (SDGs), goal 11 aims for sustainable cities and communities to be resilient, sustainable, and safe cities to achieve social, economic, and environmental sustainability. Explicitly, SDG target 11.3 concentrates on inclusive and sustainable urbanization for sustainable planning and management. As the UN Food System program aims for inclusive, sustainable, and resilient network, promoting sustainable food systems becomes a necessity to echo social, economic, and environmental sustainability. The …

Synthesis, Characterization, And Modeling Of Thermo-Responsive Hydrogels With Improved Mechanical Strength And Swelling Kinetics, Marilu Ortiz Nieves

Electronic Theses and Dissertations, 2020-2023

Hydrogels have been extensively studied for use in applications such as tissue engineering, drug delivery systems, wound dressing, actuators, valves, and sensors in Micromechanical Systems (MEMS), among others. Thermo-responsive hydrogels in particular pose various advantages such as their capability to respond to an external stimulus and reverse the response when the stimulus is removed and the ability to imbibe a significant amount of solvent and increase their volume by over 1000%. Extensive research has been conducted to tune and improve hydrogel’s rate and degree of swelling and mechanical properties. Previous work showed that when synthetic clay (Laponite) is cross-linked with …

Review Of Fiber Optic Displacement Sensors, Chen Zhu, Yiyang Zhuang, Bo Liu, Jie Huang

Electrical and Computer Engineering Faculty Research & Creative Works

Displacement Measurements Are of Significant Importance in a Variety of Critical Scientific and Engineering Fields, Such as Gravitational Wave Detection, Geophysical Research, and Manufacturing Industries. Due to the Inherent Advantages Such as Compactness, High Sensitivity, and Immunity to Electromagnetic Interference, in Recent Years, Fiber Optic Sensors Have Been Widely Used in an Expansive Range of Sensing Applications, Ranging from Infrastructural Health Monitoring to Chemical and Biological Sensing. of Particular Interest Here, Fiber Optic Displacement Sensors Have Gained Wide Interest and Have Evolved from Basic Intensity Modulation-Based Configurations to More Advanced Structures, Such as Fiber Bragg Grating (FBG)-Based and Interferometric Configurations. …

Experimental Investigation Of Asphaltene Deposition And Its Impact On Oil Recovery In Eagle Ford Shale During Miscible And Immiscible Co2huff-N-Puff Gas Injection, Mukhtar Elturki, Abdulmohsin Imqam

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

One of the challenges in extracting oil from unconventional resources using hydraulic fracturing and horizontal drilling techniques is the low primary recovery rate, which is caused by the ultra-small permeability of these resources. Consequently, it is essential to investigate gas injection methods to produce the trapped oil in shale formations. However, the injection process can cause asphaltene depositions inside the reservoir, leading to plugging of pores and oil recovery (OR) reduction. There has been limited research on using gas injection techniques to improve oil production in tight/unconventional resources, although carbon dioxide (CO2) and gas-enhanced oil recovery methods have been used …

Fabrication Of Copper Nanoparticle/Graphene Oxide Composites And Reduction Of Copper Oxide Nanowires, Maged Elshatoury

Electronic Theses and Dissertations, 2020-2023

The thesis reports the investigation of producing copper nanoparticle composites with graphene oxides (GO) using poly (sodium 4-styrenesulfonate) (PSS) and copper nanowires through the reduction of copper oxide nanowires using hydrazine. It was discovered that PSS improved the dispersity of GO and increased the absorption of copper ions on GO. An electrochemical reduction of GO/PSS/copper ion dispersion produced copper nanoparticles on GO surfaces. Reducing copper oxide nanowires on copper foils using hydrazine was achieved at a temperature where copper nanowires maintained their nanoscale structures.

Signal Enhancement Techniques For Nanoscale Infrared Spectroscopy Using Fractal Plasmonic Structures, Guntis Rutins

Electronic Theses and Dissertations, 2020-2023

Exploring phenomena occurring at the molecular level is critical to deepen our understanding of the living world. However conventional analytical tools are often limited in both spatial resolution and sensitivity. In this work we evaluate how fractal plasmonic structures can be developed for Surface Enhanced InfraRed Absorption (SEIRA) substrates to boost the infrared fingerprint signal of unknown single entities such as nanomaterials, virus or other biological systems. In this thesis, we present an overview of developments using light-matter interaction to push the limit of spatial resolution and sensitivity (Chapter 1). We discuss technological advances that allow nanoscale infrared spectroscopy despite …

Development Of Holographic Phase Masks For Wavefront Shaping, Nafiseh Mohammadian

Electronic Theses and Dissertations, 2020-2023

This dissertation explores a new method for creating holographic phase masks (HPMs), which are phase transforming optical elements holographically recorded in photosensitive glass. This novel hologram recording method allows for the fast production of HPMs of any complexity, as opposed to the traditional multistep process, which includes the design and fabrication of a master phase mask operating in the UV region before the holographic recording step. We holographically recorded transmissive HPMs that are physically robust (they are recorded in a silicate glass volume), can handle tens of kilowatts of continuous wave (CW) laser power, are un-erasable, user defined, require no …

Inventions In The Area Of Nanomaterials And Nanotechnologies. Part Iii, Leonid A. Ivanov, Li Da Xu, Svetlana R. Muminova, Aleksandr D. Ishkov, Aleksey V. Demenev

Information Technology & Decision Sciences Faculty Publications

Introduction. Advanced technologies inspire people by demonstrating the latest achievements (materials, methods, systems, technologies, devices etc.) that dramatically change the world. This, first of all, concerns nanotechnological inventions designed by scientists, engineers and specialists from different countries. Main part. The article provides an abstract overview of inventions of scientists, engineers and specialists from different countries: Russia, USA, Turkmenistan, Japan et al. The results of the creative activity of scientists, engineers and specialists, including inventions in the field of nanotechnology and nanomaterials allow, when introduced to industry, achieving a significant effect in construction, housing and communal services, and related sectors of …