Digital Commons Network^™

Impact Of Collateral Enlargement On Smooth Muscle Phenotype, Alexander Jerome Bynum

Master's Theses

Peripheral Artery Disease is a very serious disease characterized by an arterial occlusion due to atherosclerotic plaques. In response to an arterial occlusion, arteriogenesis occurs, causing smooth muscle cells to transition from a contractile to synthetic state. Also following an arterial occlusion, functional impairment was seen in the collateral circuit. An immunofluorescence protocol was developed in order to assess the impact of collateral enlargement (arteriogenesis) on smooth muscle phenotype at various time points. Smooth muscle α-actin was used to mark all smooth muscle cells, Ki-67 was used to label proliferating smooth muscle cells, and a fluorescent nuclear stain was used …

Water Quality Models For Stormwater Runoff In Two Lincoln, Nebraska Urban Watersheds, Jake Fisher

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Water quality monitoring was conducted in two urban watersheds (Colonial Hills and Taylor Park) located in southeast Lincoln, NE over a three year period spanning from October 2008 through September 2011. In-line probes continuously measured for turbidity, conductivity, dissolved oxygen, and water temperature while other water quality constituents were analyzed for discrete water samples collected using grab and automatic sampling techniques. The water quality data was used to calculate event mean concentrations (EMCs) for sixteen storm events sampled over the duration of the project period. Three types of stormwater quality multiple linear regression models were developed for the estimation of …

Water Quality Monitoring Of An Urban Stream For Total Maximum Daily Load Assessment, Jeffrey K. Mihulka

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

The purpose of this research project was to assess the water quality of an urban stream for total maximum daily load assessment in Omaha, Nebraska. This was accomplished by sampling the water quality at four different sites. These sites included sampling upstream, within, and downstream of the city. These samples were conducted throughout 2010 and 2011.

The results showed that concentrations of Escherichia coli (E. coli) are routinely above established criteria for the state of Nebraska. Concentrations of E. coli that exist in the Papillion Creek Watershed upstream of the City of Omaha have also been shown to be above …

Proteome Based Development Of Novel Affinity Tail For Immobilized Metal Affinity Chromatography And Hydrophobic Interaction Chromatography, Neha Tiwari

Graduate Theses and Dissertations

At industrial scale, reducing the step in purification and recovery is desired; this not only decreases the cost but also increases the yield. Hydrophobic Interaction Chromatography (HIC) and Immobilized Metal Affinity Chromatography (IMAC) both are not harsh on biological structure or activity of proteins; also both the techniques are economical and therefore a suitable choice at industrial level. This dissertation comprises of three parts. Purpose for the Part I was to identify and characterize Escherichia coli proteins which display affinity towards both IMAC and Hydrophobic Interaction Chromatography (HIC). Co (II) IMAC was chosen as the primary capture step, followed by …

Nanoparticle Necklace Network Arrays Exhibiting Room Temperature Single-Electron Switching, Jennifer L. Kane

Department of Chemical and Biomolecular Engineering: Dissertations, Theses, and Student Research

A single nanoparticle is one of the most sensitive electronic devices for sensing chemicals in a gas or liquid. The conductivity of a single Au nanoparticle is significantly modulated by the binding of a molecule that alters charge by just one electron. However, the single-electron sensitivity requires cryogenic temperatures and interconnection is not easy. A patterned two-dimensional network of one-dimensional nanoparticle necklaces made up of 10 nm Au particles are fabricated and shown to exhibit similar single-electron effect at room temperature. Furthermore, the long range conductivity of over 10’s of microns makes the structure easy to self-assemble onto conventional microelectronics …

A Comparison Of The Performance Of Neural Q-Learning And Soar-Rl On A Derivative Of The Block Design (Bd)/Block Design Multiple Choice (Bdmc) Subtests On The Wisc-Iv Intelligence Test, Charreau Bell

All Theses

Teaching an autonomous agent to perform tasks that are simple to humans can be complex, especially when the task requires successive steps, has a low likelihood of successful completion with a brute force approach, and when the solution space is too large or too complex to be explicitly encoded. Reinforcement learning algorithms are particularly suited to such situations, and are based on rewards that help the agent to find the optimal action to execute given a certain state. The task investigated in this thesis is a modified form of the Block Design (BD) and Block Design Multiple Choice (BDMC) subtests, …

Printing Carbon Nanotube Based Supercapacitors For Packaging, Alexandra Hartman

All Theses

Living in a world full of portable electronics, there is great need for energy storage devices. Currently, limitations for storage involve power inefficiencies as well as bulkiness. This is why printable charge storage devices that display good electrochemical performance are needed. It is for this reason that research into the production and packaging of carbon nanotube based super capacitors was carried out.
A super capacitor can be built by using high surface area multi-walled carbon nanotubes suspended in an ionic liquid. The two active electrodes are made from a combination of the multi-walled carbon nanotubes and an ionic liquid, ground …

The Design Of A Haptic Device For Training And Evaluating Surgeon And Novice Laparoscopic Movement Skills, Ryan Bontreger

All Theses

As proper levels of force application are necessary to ensure patient safety, and training hours with an expert on live subjects are difficult, enhanced computer-based training is needed to teach the next generation of surgeons. Considering the role of touch in surgery, there is a need for a device capable of discerning the haptic ability of surgical trainees. This need is amplified by minimally invasive surgical techniques where a surgeon's sense of tissue properties comes not directly through their own hands but indirectly through the tools. A haptic device capable of producing a realistic range of forces and motions that …

Dynamic Botanical Filtration System For Indoor Air Purification, Zhiqiang Wang

Mechanical and Aerospace Engineering - Dissertations

A dynamic botanical air filtration (DBAF) system was developed, tested and modeled for indoor air purification. The DBAF system consisted of an activated-carbon/hydroculture-based root bed for potted-plant, a fan for driving air through the root bed for purification, and an irrigation system for maintaining proper moisture content in the root bed. Results from test conducted in a full-scale open office space indicated that the filtration system had ability to supply clean air equivalent to 80% of required outdoor air supply for the space. The DBAF was effective for removing both formaldehyde and toluene at 5 to 32% volumetric water content …

Prediction Models For Estimation Of Soil Moisture Content, Swathi Gorthi

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The Center for Self-Organizing Intelligent Systems (CSOIS) has been successful in developing personal remote sensing systems. These systems can be further enhanced to monitor important resources of earth such as soil moisture content. Soil moisture is the major component of the soil in relation to plant growth. Soil water dissolves salts and makes up the soil solution, which is important as medium for supply of nutrients to growing plants.

Usually, measuring such physical quantities would include using derived formulas that mathematically describe the relationships between the parameters involved. With the advancements in computer modeling, other methods such as empirical modeling …

Modeling Impacts Of Foothills Parkway Construction On Stream Water Quality Using Real-Time Remote Monitoring, Clark Chewning

All Theses

ABSTRACT
The need to monitor surface water quality has been increasingly recognized in recent years in environmental and natural resource management. The advent of real-time remote monitoring technologies has accelerated and enhanced this process. Field observations of water quality data are able to be conducted and analyzed in ways that were previously unavailable.
The objectives of this research were to deploy and test a real-time remote monitoring system for three small watersheds (Hembree, Dunn, and Rudd Hollows) in the Great Smoky Mountains. The watersheds ranged in size from 12 to 19 ha. Real-time remote monitoring stations were established in three …

Robust Design And Monitoring Tools For Sustainable And Resilient Structural Design And Infrastructure Management, Sarah Dalton

All Theses

Structural systems are subject to inherent uncertainties due to the variability in many hard-to-control `noise factors' that include but are not limited to external loads, material properties, and construction workmanship. Two design methodologies have been widely accepted in the practicing engineering realm to manage the variability associated with operational structures: Allowable Stress Design (ASD) and Load and Resistance Factor Design (LRFD). These traditional approaches explicitly recognize the presence of uncertainty; however, they do not take robustness against this uncertainty into consideration. Overlooking this robustness against uncertainty in the structural design process has two drawbacks. First, the design may not satisfy …

The Development Of A Far Red To Near Infrared Fluorescent Probe For Use In Optical Imaging, Margaret Fiedler

All Theses

New techniques for biological optical imaging are of great interest for the detection and visualization of processes and disease in both clinical and research areas. One major advancement has been the use of far red and near infrared (NIR) light, as it has the ability to penetrate tissues deeper than other parts of the spectrum which are readily scatter and absorbed by the surroundings. In order to improve the signal to noise ratio and resolution of optical images, contrast agents are used. Fluorescent markers can be modified to attach to specific molecular targets, creating small molecular probes. These targets can …

Fabrication And Characterization Of Multi-Functional Non-Spherical Particles Via Mechanical Deformation, Venkata Shilpa Varahagiri

All Theses

Nanoparticles bridge the gap between bulk materials and molecules. They possess exciting but contrasting mechanical, chemical, magnetic and optical properties when compared to their bulk counterparts due to their shape and size. When the size of noble metal nanoparticles is reduced to less than the wavelength of light, the particles intensely absorb and scatter light at wavelengths that depend on the particle size, shape, and local dielectric environment due to Localized Surface Plasmon Resonance (LSPR) modes. Recently, plasmonic particles have been used in a wide variety of sensor and optical device applications including immunoassays and surface enhanced Raman spectroscopy substrates. …

Optofluidic Glucose Sensor Utilizing An Epoxy-Based, Transparent Dry Film Resist, Zhan Gao, Sijia Gong, Chang Soo Kim, David B. Henthorn

Electrical and Computer Engineering Faculty Research & Creative Works

An enzymatic, fluorescent glucose sensor was constructed with a novel epoxy-Based, optically transparent dry film resist (PerMX 3000 series, DuPont). This material was utilized as the main active material for fluidic structure and optical interrogation. This sensor was based on the enzymatic reaction of glucose oxidase (GOD) and utilized a ruthenium complex fluorophore as the reporting agent. Both the oxygen-sensitive ruthenium complex and GOD were incorporated into poly (ethylene glycol) (PEG)-Based hydrogel materials, which were lithographically patterned and embedded inside the PerMX fluidic channel after wafer-bonding process. the optofluidic sensing platform with this embedded sensing elements exhibited a wide dynamic …

Improvements On Just-About-Right (Jar) Scales As Product Optimization Tools Using Kano Modeling Concepts, Bangde Li

Graduate Theses and Dissertations

Attribute Kano characteristics are useful in product design to prioritize development efforts. However, attribute Kano characteristics have not been discussed and applied to product optimization when using Just-About-Right (JAR) scales. Product optimizations without identifying attributes Kano characteristics can be misleading. The two objectives in this research were: 1. Determine attribute Kano categories using a modified classic Kano classification methodology. 2. Propose a method to measure attribute performance and identify attribute Kano characteristics to direct product optimization. Two methodologies of attribute Kano classification were investigated. In experiment one, a modified classic Kano methodology was employed to determine attribute Kano categories through …

Design And Fabrication Of Nanofluidic Systems For Biomolecule Characterizations, Orain Ansel Hibbert

Graduate Theses and Dissertations

Nanofluidic channel systems were designed and fabricated by combining MEMS microfabrication with AFM nanolithography. In the fabrication process flow, photolithography was first utilized to pattern microfluidic channels and reservoirs on a 4" Pyrex substrate. Subsequently, atomic force microscopy (AFM) based nanolithography was used to mechanically fabricate nanochannels to connect the microreservoirs which formed the inlet and outlet of the nanofluidic system. A Tap190 Diamond-Like Carbon (DLC) AFM tip with a force constant of 48 N/m and a radius of less than 15 nm was used as the nanolithography tool. The resultant nanochannel ranges from 20 to 80 µm in length …

Photodetectors And Photovoltaic Devices Based On Semiconductor Nanomaterials, Jiang Wu

Graduate Theses and Dissertations

Photodetectors based various nanostructures and plasmon enhanced solar cells are investigated in this dissertation. The motivation of the dissertation rise is driven by urgent need of both high efficiency photodetectors and solar cells.

First, quantum dot infrared photodetectors have been intensely investigated due to their promise in high performance photodetectors. However, the strain-driven growth of quantum dots has hindered the progress of quantum dot photodetectors. The presence of strain in the device presents complexity in designing as well as defects. Therefore, in this project, new designs of quantum dot photodetector structures are presented to improve the control over detection wavelength. …

Direct Contact Pyrolysis Of Hydrocarbons: A Source Of Hydrogen And Interesting Carbon Formations, Peter G. Faught

UNLV Theses, Dissertations, Professional Papers, and Capstones

The work detailed in this document looks at a novel liquid metal supported catalytic system for the generation of hydrogen by decomposition of ethanol through direct contact pyrolysis. The hydrogen is produced at relatively low temperatures (500-600°C) and has carbon and water as co-products. It should be noted that CO is not observed as a product at these low temperatures. This is to be contrasted with the hydrogen produced at higher temperature from ethanol which does contain carbon monoxide. The presence of carbon monoxide in hydrogen complicates fuel cell operation and catalytic chemical processes. Thus, the lack of CO in …

Spectroscopic Methods Of Process Monitoring For Safeguards Of Used Nuclear Fuel Separations, Jamie Lee Warburton

UNLV Theses, Dissertations, Professional Papers, and Capstones

To support the demonstration of a more proliferation-resistant nuclear fuel processing plant, techniques and instrumentation to allow the real-time, online determination of special nuclear material concentrations in-process must be developed. An ideal materials accountability technique for proliferation resistance should provide nondestructive, realtime, on-line information of metal and ligand concentrations in separations streams without perturbing the process. UV-Visible spectroscopy can be adapted for this precise purpose in solvent extraction-based separations.

The primary goal of this project is to understand fundamental URanium EXtraction (UREX) and Plutonium-URanium EXtraction (PUREX) reprocessing chemistry and corresponding UV-Visible spectroscopy for application in process monitoring for safeguards. By …

Performance Analysis And Fitness Of Gpgpu And Multicore Architectures For Scientific Applications, Mohammad Bhuiyan

All Dissertations

Recent trends in computing architecture development have focused on exploiting task- and data-level parallelism from applications. Major hardware vendors are experimenting with novel parallel architectures, such as the Many Integrated Core (MIC) from Intel that integrates 50 or more x86 processors on a single chip, the Accelerated Processing Unit from AMD that integrates a multicore x86 processor with a graphical processing unit (GPU), and many other initiatives from other hardware vendors that are underway.
Therefore, various types of architectures are available to developers for accelerating an application. A performance model that predicts the suitability of the architecture for accelerating an …

Studies On Power Hop Using A Nonlinear Model Of An Agricultural Tractor, Adam B. Flaugh

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

Power hop is an unstable dynamic phenomenon that is observed on agricultural tractors operating at field working speeds under typical draft loads. This dynamic instability can be identified as a bounce motion preceded by an increasing oscillation in either the pitch or bounce modes. A definite and comprehensive correction or prevention strategy for the control of power hop does not exist. In this work a linear and a nonlinear model of an agricultural tractor were developed. The method of multiple time scales has been employed in the analysis of the nonlinear model. Numerical results have been obtained using Mathematica to …

The Economics And Logistics Of The Dual Harvest Of Grain And Biomass In A Single-Pass, Matthew T. Wold

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

Significant interest has developed in using cellulosic resources, especially crop residues, to create biofuels. Collecting these residues in a single-pass of the harvester across the field has the potential to be a low cost option. Two models have been developed; the first characterizes the in-field logistics of single-pass crop residue collection, the second the economics. These models allow the user to easily examine a wide variety of both grain-only and single-pass residue collection harvest cases. A variety of possible residue collection cases have been examined, and their effects both on harvester field capacity and harvest cost compared to grain-only harvest …

Modeling And Control Of A Flexible Ionic Polymer Metal Composite(Ipmc) Actuator For Underwater Propulsion, Shivakanth Gutta

UNLV Theses, Dissertations, Professional Papers, and Capstones

The goal of this research is to model and control the underwater vehicle propelled by IPMC actuator. IPMC consists of an ionic membrane sandwiched between two metallic electrodes. When an external voltage is applied, IPMC undergoes large deformation due to transport of ions. Due to its ability to work in aqueous environments, it can be used for developing small scale underwater vehicles.

First, Finite element approach is used to describe the dynamics of the both single and segmented IPMC actuator. In the approach presented, each element is attached with a local coordinate system that undergoes rigid body motion along with …

Field-Controlled Electron Transfer And Reaction Kinetics Of The Biological Catalytic System Of Microperoxidase-11 And Hydrogen Peroxide, Yongki Chou, Siu-Tung Yau

Electrical and Computer Engineering Faculty Publications

Controlled reaction kinetics of the bio-catalytic system of microperoxidase-11 and hydrogen peroxide has been achieved using an electrostatic technique. The technique allowed independent control of 1) the thermodynamics of the system using electrochemical setup and 2) the quantum mechanical tunneling at the interface between microperoxidase-11 and the working electrode by applying a gating voltage to the electrode. The cathodic currents of electrodes immobilized with microperoxidase-11 showed a dependence on the gating voltage in the presence of hydrogen peroxide, indicating a controllable reduction reaction. The measured kinetic parameters of the bio-catalytic reduction showed nonlinear dependences on the gating voltage as the …

'Exploring The Potential Of Using Antimicrobial Peptides And Copper Nanoparticles In Tackling Surgical Site Infections', Sriram Sankar

All Theses

Postoperative wound site infections remain a major source of illness with approximately 500,000 infections per year, among an estimated 27 million surgical procedures. Such infections account for approximately one quarter of the estimated 2 million nosocomial infections in the United States which causes about 90,000 deaths each year. More than 70% of the bacteria that causes such infections are resistant to at least one of the antibiotics and result in longer hospitalization; besides requiring second option treatments that may be less effective, more toxic and expensive. Hence, there is a frenetic search for alternatives and in this regard, antimicrobial peptides …

Dna Electrophoretic Migration Patterns Change After Exposure Of Jurkat Cells To A Single Intense Nanosecond Electric Pulse, Stefania Romeo, Luigi Zeni, Maurizio Sarti, Anna Sannino, Maria Rosaria Scarfi, P. Thomas Vernier, Olga Zeni

Bioelectrics Publications

Intense nanosecond pulsed electric fields (nsPEFs) interact with cellular membranes and intracellular structures. Investigating how cells respond to nanosecond pulses is essential for a) development of biomedical applications of nsPEFs, including cancer therapy, and b) better understanding of the mechanisms underlying such bioelectrical effects. In this work, we explored relatively mild exposure conditions to provide insight into weak, reversible effects, laying a foundation for a better understanding of the interaction mechanisms and kinetics underlying nsPEF bio-effects. In particular, we report changes in the nucleus of Jurkat cells (human lymphoblastoid T cells) exposed to single pulses of 60 ns duration and …

Clean Energy Water Disinfection For Small Rural Remote Communities, Nathan Bearden

Chemical Engineering Undergraduate Honors Theses

The University of Arkansas competed in the 2011 Waste-Management Education and Research Consortium (WERC) competition. The U of A team participated in Task 7, which was titled “Clean Energy Water Disinfection for Small, Remote Rural Communities”. The task looks for a solution to a continuing problem throughout the world: disinfecting water. The task’s problem statement was to develop and a standalone disinfection system that could be used for a small community. It will need at least 3000 gallons of water per day. The solution must address only bacterial disinfection and must be powered by a non-fossil based energy source. Other …

Impedance-Based Detection Of Tissue Using A Multi-Electrode Device, Shane Killian Fleshman

Master's Theses

Melanoma skin cancer is the abnormal growth of the melanocytes – the pigmented cells located in the epidermis. The current gold standard diagnostic technique for determining whether a lesion is cancerous involves subjectively examining suspicious lesions and performing an invasive biopsy to confirm melanoma. This method may neglect some lesions or cause scarring from biopsies that turn out to be benign. Thus, impedance-based detection using a multi-electrode device was investigated as a noninvasive technique to diagnose melanoma skin cancer. The multi-electrode device was designed with 8 equally spaced Ag/AgCl electrodes surrounding one central electrode at a 5 mm radius. The …

Cubesat Constellation Analysis For Data Relaying, Bradley Ryan Smalarz

Master's Theses

Current CubeSat communication technology limits the amount of time, and number of accesses with ground stations. It has been proposed to use a constellation of CubeSats to improve relay performance and increase the number of accesses between a CubeSat and ground stations. By using the spatial and temporal analysis features of STK, coupled with the STK/Matlab interface a robust tool was created to analyze the performance of CubeSat constellations based on a store-and-forward communications model which is not currently supported by the STK Engine. Utilizing the Connect messaging format through a socket connection on the local machine, a Matlab graphical …