Digital Commons Network^™

Applied Hypergame Theory For Network Defense, Alan S. Gibson

Theses and Dissertations

Cyber operations are the most important aspect of military conflicts in the 21st century, but unfortunately they are also among the least understood. The continual battle for network dominance between attackers and defenders is considered to be a complex game. Hypergame theory is an extension of game theory that addresses the kind of games where misperception exists, as is often the case in military engagements. Hypergame theory, like game theory, uses a game model to determine strategy selection, but goes beyond game theory by examining subgames that exist within the full game. The inclusion of misperception and misinformation in the …

Kernel Extended Real-Valued Negative Selection Algorithm (Kernsa), Brett A . Smith

Theses and Dissertations

Artificial Immune Systems (AISs) are a type of statistical Machine Learning (ML) algorithm based on the Biological Immune System (BIS) applied to classification problems. Inspired by increased performance in other ML algorithms when combined with kernel methods, this research explores using kernel methods as the distance measure for a specific AIS algorithm, the Real-valued Negative Selection Algorithm (RNSA). This research also demonstrates that the hard binary decision from the traditional RNSA can be relaxed to a continuous output, while maintaining the ability to map back to the original RNSA decision boundary if necessary. Continuous output is used in this research …

Lignin Conversion Into Bio-Based Chemicals, Pietro Palmisano

BioEnergy IV: Innovations in Biomass Conversion for Heat, Power, Fuels and Chemicals

No abstract provided.

The Best Approach For The Conversion Job; Biological Thermochemical Or Both?, David Bressler

BioEnergy IV: Innovations in Biomass Conversion for Heat, Power, Fuels and Chemicals

No abstract provided.

Quantum Coherence And Entanglement In The Avian Compass, James A. Pauls, Yiteng Zhang, Gennady P. Berman, Sabre Kais

Birck and NCN Publications

The radical-pair mechanism is one of two distinct mechanisms used to explain the navigation of birds in geomagnetic fields, however little research has been done to explore the role of quantum entanglement in this mechanism. In this paper we study the lifetime of radical-pair entanglement corresponding to the magnitude and direction of magnetic fields to show that the entanglement lasts long enough in birds to be used for navigation. We also find that the birds appear to not be able to orient themselves directly based on radical-pair entanglement due to a lack of orientation sensitivity of the entanglement in the …

The Effects Of Mismatches And Probe Tethering Configurations On The Stability Of Dna Duplexes On Surfaces, Kyle Evan Pratt

Theses and Dissertations

DNA microarrays are chip-based, analysis tools which can perform hundreds of thousands of parallel assays to determine the identity of genes or gene expression levels present in a sample. They have been identified as a key technology in genomic sciences and emergent medical techniques; however, despite their abundant use in research laboratories, microarrays have not been used in the clinical setting to the fullest potential due to the difficulty of obtaining reproducible results. Microarrays work on the principle of DNA hybridization, and can only be as accurate as this process is robust. Fundamental, molecular-level understanding of hybridization on surfaces is …

First Spectroscopic Identification Of Pyrocarbonate For High Co2 Flux Membranes Containing Highly Interconnected Three Dimensional Ionic Channels, Lingling Zhang, Xinyu Huang, Changyong Qin, Kyle Brinkman, Yunhui Gong, Siwei Wang, Kevin Huang

Faculty Publications

Identification of the existence of pyrocarbonate ion C₂O₅²⁻ in molten carbonates exposed to a CO₂ atmosphere provides key support for a newly established bi-ionic transport model that explains the mechanisms of high CO₂ permeation flux observed in mixed oxide-ion andcarbonate-ion conducting (MOCC) membranes containing highly interconnected three dimensional ionic channels. Here we report the first Raman spectroscopic evidence of C₂O₅²⁻ as an active species involved in the CO₂-transport process of MOCC membranes exposed to a CO₂atmosphere. The two new broad peaks centered at 1317 cm^{−1 …}

Production Of Bio-Coal From Biomass In A Mechanically Fluidized Reactor (Mfr), Anastasia Colomba, Franco Berruti, Cedric Briens

BioEnergy IV: Innovations in Biomass Conversion for Heat, Power, Fuels and Chemicals

No abstract provided.

Materials Education And Research In Art And Design: A New Role For Libraries (Survey Stats), Mark Pompelia

Materials Education and Research in Art and Design: A New Role for Libraries

No abstract provided.

Materials Education And Research In Art And Design: A New Role For Libraries (Program Sheet), Mark Pompelia

Materials Education and Research in Art and Design: A New Role for Libraries

No abstract provided.

Materials Education And Research In Art And Design: A New Role For Libraries (Program Booklet), Mark Pompelia

Materials Education and Research in Art and Design: A New Role for Libraries

No abstract provided.

Materials Education And Research In Art And Design: A New Role For Libraries (Website), Mark Pompelia

Materials Education and Research in Art and Design: A New Role for Libraries

No abstract provided.

Materials Collection Creation And Administration: A New Role For Libraries (White Paper), Mark Pompelia

Materials Education and Research in Art and Design: A New Role for Libraries

The Problem/Opportunity: To define, identify, and guide design-based materials collections in academic settings and foster community among those with existing collections and/or those considering creating and supporting one.

Contents and topics:

1. What is a materials collection?
2. Why have a materials collection?
3. Acquisition strategies
4. Organizational approaches
5. Programming possibilities
6. Symposium summary
7. Resources

Poly(N-Isopropylacrylamide)-Based Scaffolds For Tissue Engineering Applications, Pamela Kubinski

Theses and Dissertations

The primary goal of this work is to investigate the potential of poly(Nisopropylacrylamide)- based scaffolds in tissue engineering applications, specifically spinal injury and nucleus pulposus replacement. Poly(N-isopropylacrylamide), denoted PNIPAAm, is a synthetic polymer with hydrophilic properties at room temperature, but above 32C the chains become hydrophobic and entangle to form physical crosslinks. This thermoresponsive property enables PNIPAAm to be implanted as a free-flowing solution at room temperature and collapse into a gel in physiological conditions. However, as a homopolymer, the hydrophobicity of PNIPAAm in vivo causes the hydrogel to expel water and exhibit inelastic properties that do not mimic those …

A New Approach To Light-Weight Ablators Analysis: From Micro-Tomography Measurements To Statistical Analysis And Modeling, Nagi N. Mansour, Francesco Panerai, Alexandre Martin, Dilworth Y. Parkinson, Alastair A. Macdowell, Abdelmoula Haboub, Timothy A. Sandstrom, Tony Fast, Gerard L. Vignoles, Jean Lachaud

Mechanical Engineering Faculty Publications

The morphology characteristics and ablation behavior of a highly porous carbon fiber preform are studied using a combined experimental/numerical approach. Morphological characterization of the three-dimensional structure of the material is performed by hard X-rays synchrotron micro-tomography at the Advanced Light Source of Lawrence Berkeley National Laboratory. The resulting micro-tomography voxels are used to compute geometrical properties of the carbon preform, like porosity, specific surface area and tortuosity, that are otherwise indirectly measured through experimental techniques. The reconstructed volumes are used to build a computational grid for numerical simulations of the fibers' ablation. By modeling the diffusion of oxygen through the …

Flow-Tube Oxidation Experiments On The Carbon Preform Of Pica, Francesco Panerai, Alexandre Martin, Nagi N. Mansour, Steven A. Sepka, Jean Lachaud

Mechanical Engineering Faculty Publications

Oxidation experiments on the carbon preform of a phenolic-impregnated carbon ablator were performed in the NASA Ames ow-tube reactor facility, at temperatures between 700 and 1300 K, under dry air gas at pressures between 103 and 104 Pa. Mass loss, volumetric recession and density changes were measured at different test conditions. An analysis of the diffusion/reaction competition within the porous material, based on the Thiele number, allowed us to identify low temperature and low pressure conditions to be dominated by in-depth volume oxidation. Experiments above 1000 K were found at transition conditions, where diffusion and reaction occur at similar scales. …

Tools For Assessing Climate Impacts On Fish And Wildlife, Chad B. Wilsey, Joshua J. Lawler, Edwin P. Maurer, Donald Mckenzie, Patricia A. Townsend, Richard Gwozdz, James A. Freund, Keala Hagmann, Karen M. Hutten

Civil, Environmental and Sustainable Engineering

Climate change is already affecting many fish and wildlife populations. Managing these populations requires an understanding of the nature, magnitude, and distribution of current and future climate impacts. Scientists and managers have at their disposal a wide array of models for projecting climate impacts that can be used to build such an understanding. Here, we provide a broad overview of the types of models available for forecasting the effects of climate change on key processes that affect fish and wildlife habitat (hydrology, fire, and vegetation), as well as on individual species distributions and populations. We present a framework for how …

Preparation Of A Polylactic Acid With Hydroxyapatite Reinforcement Composite, Odessa N. Quezon

Materials Engineering

Biodegradable polymers are a prime material choice for temporary biomedical devices due to its ability to degrade into non-toxic products for their use in vivo. However, polylactic acid (PLA) by itself lacks the sufficient strength and stiffness to permit their use as its properties begin to decrease as the polymer degrades. To improve the polymer’s mechanical properties, hydroxyapatite (HA) will be added to the PLA solution to act as reinforcement. The chemical property, glass transition temperature of a polymer, also plays a key role in the mechanical properties of the polymer. PLA’s glass temperature is 130⁰F. A polymer that …

Strength Testing And Material Characterization Of Cactus Spines, Mary Cooper, Jeff Goldstein, Thomas Tarlton

Materials Engineering

Twelve different species of cactus spines from 6 different genera were collected from living specimens and maintained in a dry storage environment. Spines from each species underwent 3-point bend testing, XRD testing, and SEM imaging. XRD analysis was used to verify the presence of cellulose whisker like nanocrystals and to calculate the percent crystallinity of each spine. SEM images were captured of fracture surfaces at viewing angles of 90° and 45° relative to the fracture surface, with magnifications ranging between 150x and 4,000x. A total of six spines from each species were tested in three point bending using a high-resolution …

Application Of Systems Engineering And Project Management For Algae Photo Bioreactors, Andrew S. Balberchak

Industrial and Manufacturing Engineering

EXECUTIVE SUMMARY

Today there is much talk about different sources for biofuel to replace the decreasing supply of fossil fuels. Algae seem very promising with its abundance across the globe and relatively simple growing conditions. Lipids can be extracted from this organism which is then converted to biofuel. Although biofuel production from algae is not economically viable at this stage, researchers are suggesting using the by-products of algae for supplemental and healthcare use. If true, this could justify the economics of obtaining fuel from algae by creating more markets from various algae products.

Cal Poly State University’s Food Science and …

Reason-To-Reuse: A Sustainable To-Go Food Storage Container System For Restaurants, Ryan Christopher Labuda

Industrial and Manufacturing Engineering

A food storage container (FSC), also known as a to-go box, is a very popular way for Americans to pick up food when in a rush and take it with them or store leftovers after dining. Some of the more popular materials that make up FSCs include Styrofoam, paper and plastic. These FSCs are meant for one time use and subsequently the majority end up as waste in their local regions. Reason-To-Reuse is a sustainable business that provides an alternative to the current model of disposable FSCs at restaurants by cutting down on waste. The objective of the Reason-To-Reuse project …

Design And Development Of An Integrated Mobile Robot System For Use In Simple Formations, Christopher D. Brune

Electronic Theses and Dissertations

In recent years, formation control of autonomous unmanned vehicles has become an active area of research with its many broad applications in areas such as transportation and surveillance. The work presented in this thesis involves the design and implementation of small unmanned ground vehicles to be used in leader-follower formations. This mechatronics project involves breadth in areas of mechanical, electrical, and computer engineering design. A vehicle with a unicycle-type drive mechanism is designed in 3D CAD software and manufactured using 3D printing capabilities. The vehicle is then modeled using the unicycle kinematic equations of motion and simulated in MATLAB/Simulink. Simple …

Evaluation Of High Phosphorus Electroless Nickel Platings To Protect Carbon Steel Heat Exchangers In Seawater Service, Nathan Brink

Materials Engineering

The purpose of this project was to determine the suitability of using a high phosphorus electroless nickel (HPEN) coating to prevent corrosion in carbon steel heat exchangers in seawater service. 1 in. x 4 in. samples were cut from ¼ in. SA-516-70 pressure vessel plate, pickled to remove mill scale, dressed with 300 grit sand paper and sent out for plating with 2 mils of HPEN. Due to a clerical error during plating, samples were plated to a significantly lesser extent than requested. Samples were plated with approximately 0.6 mils of HPEN versus the 2 mils requested, however this was …

Interactive Museum Exhibit To Introduce K-6 Grade Students To Circuits And The Electric Conductivity Of Various Materials, Thien Vu-Nguyen

Materials Engineering

The SciTechatorium (SciTech) is a museum filled with interactive exhibits for visitors to learn science informally. A new exhibit was developed to explore electric conductivity and circuits. The design was made based on the size of the material sample the students will use and to allow interactions with multiple users. The materials the students will use were selected using Cambridge Engineering Selector (CES) to sort the materials by resistivity, the inverse of conductivity. After sorting the materials by resistivity, five different materials (balsa wood, polystyrene, polyester, stainless steel, and copper) were chosen for the exhibit. The target size of the …

Development Of A High Precision Quantum Dot Synthysis Method Utilizing A Microfluidic Reactor And In-Line Fluorescence Cell, Harry Lafferty, Jonny Hoadley

Materials Engineering

Quantum dots show great potential for use as spectral converters in solar cells, lighting applications and biological imaging. These applications require precise control of quantum dot size to maximize performance. The fluorescence profile of quantum dots in solution correlates directly with particle size. An alternative, high precision process was developed for the synthesis of cadmium-selenide quantum dots using a microfluidic reactor and fluorescence flow through cell. The process required creating separate cadmium and selenium precursors that were then mixed in a nitrogen environment at 17± 1°C. Using an NE-300^® syringe pump, the solution was pumped through a microfluidic reactor …

Laboratory Evaluation Of A Turn Compensation Control System For A Ground Sprayer, Wesley M. Porter, Jorge A. Rascon, Yeyin Shi, Randal K. Taylor, Paul A. Weckler

Department of Agricultural and Biological Systems Engineering: Faculty Publications

The ability to compensate sprayer nozzle flow across a horizontal boom has the potential to mitigate the problem of inaccurate chemical application rate due to lateral speed differences when sprayers are turning. A laboratory testing platform and procedure were developed and tested with a commercial turn compensation control system for a ground sprayer. Virtual paths consisting of simulated GPS signals representing right and left turns separated by straight segments were simulated with four turning radii (75%, 125%, 250%, and 500%) based on boom width. Actual application rates from 11 nozzles spread across the boom were measured using load cells in …

Ranbp9 Aggravates Synaptic Damage In The Mouse Brain And Is Inversely Correlated To Spinophilin Levels In Alzheimer's Brain Synaptosomes, Juan Pablo Palavicini, Hongjie Wang, Elisabetta Bianchi, Shaohua Xu, Jagadeesh S. Rao, David E. Kang, Madepalli K. Lakshmana

Biomedical Engineering and Sciences Faculty Publications

We previously demonstrated that over expression of RanBP9 led to enhanced Ab generation in a variety of cell lines and primary neuronal cultures, and subsequently, we confirmed increased amyloid plaque burden in a mouse model of Alzheimer’s disease (AD). In the present study, we found striking reduction of spinophilin protein levels when RanBP9 is overexpressed. At 12 months of age, we found spinophilin levels reduced by 70% (Po0.001) in the cortex of APDE9/RanBP9 mice compared with that in wild-type (WT) controls. In the hippocampus, the spinophilin levels were reduced by 45% (Po0.01) in the APDE9/RanBP9 mice. Spinophilin immunoreactivity was also …

Spread Spectrum Jamming - Part 2, Casey Burke, Christian Hume, Javier Meza

Electrical Engineering

Direct-sequence spread spectrum (DSSS) is a special modulation technique used in many telecommunication devices which uses a wide bandwidth relative to single-frequency carrier modulation techniques. Like the name suggests, the spectral content of wireless signals are spread across a range of frequencies to increase the security of transmitted signals by reducing the potential impact of outside interference (i.e. noise, jamming). This resistance against outside interference and jamming has particular application in the field of electronic warfare where spread spectrum jamming techniques may prove to be an effective way of shutting down remotely controlled enemy vehicles.

Last year, a group of …

Near-Infrared Optical Imaging For Monitoring The Regeneration Of Osteogenic Tissue-Engineered Constructs., Elizabeth A. Cowles, Joy L. Kovar, Evan T. Curtis, Huihui Xu, Shadi F. Othman

All Faculty Articles - School of Engineering and Computer Science

Millions of cases of bone injury or loss due to trauma, osteoporosis, and cancer occur in the United States each year. Because bone is limited in its ability to regenerate, alternative therapy approaches are needed. Bone tissue engineering has the potential to correct musculoskeletal disorders through the development of cell-based substitutes for osteogenic tissue replacement. Multiple medical imaging techniques such as magnetic resonance microscopy (MRM) were investigated recently; these techniques are able to provide useful information on the anatomical and structural changes of developing bone. However, there is a need for noninvasive approaches to evaluate biochemical constituents and consequent compositional …

A Review Of P300, Ssvep, And Hybrid P300/Ssvep Brain-Computer Interface Systems, Reza Fazel-Rezai, Setare Amiri, Ahmed Rabbi, Leila Azinfar

Electrical Engineering Faculty Publications

No abstract provided.