Digital Commons Network^™

Test 2096: Case Ih Steiger 540, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2095: Case Ih Steiger 500, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2093: Case Ih Steiger 420, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2092: Case Ih Steiger 370, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2090: John Deere 7230r, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2087: Challenger Mt755e, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2086a: New Holland T8.420, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2086: Case Ih Magnum 370, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2085: John Deere 7250r, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2083: John Deere 7290r, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2103: John Deere 8345rt, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2084: John Deere 7270r, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2102: John Deere 8370r, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2098:John Deere 8245r, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2094a: New Holland T9.530, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Degradable Borate Glass Polyalkenoate Cements, L. Shen, A. Coughlan, Mark R. Towler, M. Hall

Chemical and Biochemical Engineering Faculty Research & Creative Works

Glass polyalkenoate cements (GPCs) containing aluminum-free borate glasses having the general composition Ag₂O-Na₂O-CaO-SrO-ZnO- TiO₂-B₂O₃ were evaluated in this work. An initial screening study of sixteen compositions was used to identify regions of glass formation and cement compositions with promising rheological properties. The results of the screening study were used to develop four model borate glass compositions for further study. A second round of rheological experiments was used to identify a preferred GPC formulation for each model glass composition. The model borate glasses containing higher levels of TiO₂ (7.5 mol %) …

The Environmental Impact Of Urbanization Within Abu Dhabi On The Microbial Profile Of Man-Made Beaches, Fatima Al Marzooqi, Fatme Al Anouti

All Works

The United Arab Emirates (UAE) is witnessing a significant development in several areas. Many new construction projects are currently underway. One of the main project aims at establishing new beaches around the coastal areas of the UAE. Particularly, in Abu Dhabi the capital of UAE, a new man-made beach has been recently developed in the north coast of the city. The urbanization of this newly developed beach might have a significant impact on the environment. This study aims to investigate the effects of urban development of beaches within Abu Dhabi on the microbial profile of the soil. It is hypothesized …

Passive Sampling Methods For Contaminated Sediments: Scientific Rationale Supporting Use Of Freely Dissolved Concentrations, Philipp Mayer, Thomas F. Parkerton, Rachel G. Adams, John G. Cargill, Jay Gan, Todd Gouin, Philip M. Gschwend, Steven B. Hawthorne, Paul Helm, Gesine Witt, Jing You, Beate I. Escher

Civil and Environmental Engineering Faculty Works

Passive sampling methods (PSMs) allow the quantification of the freely dissolved concentration (Cfree ) of an organic contaminant even in complex matrices such as sediments. Cfree is directly related to a contaminant's chemical activity, which drives spontaneous processes including diffusive uptake into benthic organisms and exchange with the overlying water column. Consequently, Cfree provides a more relevant dose metric than total sediment concentration. Recent developments in PSMs have significantly improved our ability to reliably measure even very low levels of Cfree . Application of PSMs in sediments is preferably conducted in the equilibrium regime, where freely dissolved concentrations in the …

Tissue Engineering Scaffold Fabrication And Processing Techniques To Improve Cellular Infiltration, Casey Grey

Theses and Dissertations

Electrospinning is a technique used to generate scaffolds composed of nano- to micron-sized fibers for use in tissue engineering. This technology possesses several key weaknesses that prevent it from adoption into the clinical treatment regime. One major weakness is the lack of porosity exhibited in most electrospun scaffolds, preventing cellular infiltration and thus hosts tissue integration. Another weakness seen in the field is the inability to physically cut electrospun scaffolds in the frontal plane for subsequent microscopic analysis (current electrospun scaffold analysis is limited to sectioning in the cross-sectional plane). Given this it becomes extremely difficult to associate spatial scaffold …

Study On The Vortex Wake Of An Airfoil Equipped With Flexible Trailing Edge Fringes, Zhengkai He

Browse all Theses and Dissertations

With the inspiration of owl's silent flight, a traditional airfoil S833 equipped with flexible fringes on the trailing edge is investigated through numerical simulation and experiments in a wind tunnel. The newly constructed airfoil is modeled and numerically investigated. An incompressible, 2D and viscous flow solver in the Computational Fluid Dynamics (CFD) software FLUENT is utilized to conduct the numerical simulation on the vortex flow feature in the wake of the airfoil. A User Defined Function code was applied to generate the defined motion of flexible fringes. The effects of the flapping frequency of the fringe and the deformation pattern …

Hierarchical Porous Structures Functionalized With Silver Nanoparticles: Adaptation For Antibacterial Applications, Anil Kumar Karumuri

Browse all Theses and Dissertations

For a large number of applications involving surface interactions, there is an ever growing demand for materials with high specific surface area (surface area to volume ratio). Porous materials and nanomaterials offer higher specific surface area (SSA) each with their respective advantages and disadvantages. This research program is focused on bringing the two approaches together to create truly "hierarchical" materials that combine advantages of both while minimizing their disadvantages. In this study, various carbon based porous geometries were fabricated by grafting carbon nanotubes (CNT) onto highly porous reticulated carbon foams. These structures were further modified by functionalizing metal nanoparticles such …

Evaluation Of Functional Near Infrared Spectroscopy (Fnirs) For Assessment Of The Visual And Motor Cortices In Adults, Brenna Giacherio

Browse all Theses and Dissertations

Introduction: Functional near-infrared spectroscopy (fNIRS) is a relatively young technique in the field of medical imaging. As such, it has yet to be widely implemented for clinical use, despite its promising advantages. However, unlike fMRI-its much bulkier and costly counterpart-fNIRS has yet to be proven as a standalone imaging tool within a clinical setting, particularly that of ophthalmology or physical therapy.

Methods: Ten healthy young adults (23.8 ± 4.8 years) participated in the study. Activation of the visual cortex was achieved utilizing various reversing checkerboard stimuli across three data collection sessions for each participant. Further, activation of the motor cortex …

Finite Element Simulation Of Skull Fracture Evoked By Fall Injuries, Anthony Vicini

Browse all Theses and Dissertations

This study presents novel predictive equations for von Mises stresses and deflection of bones in the frontal and lateral regions of the skull. The equations were developed based on results of a finite element model developed here. The model was validated for frontal and lateral loading conditions with input values mimetic to fall scenarios. Using neural network processing of the information derived from the model achieved R2 values of 0.9990 for both the stress and deflection. Based on the outcome of the fall victims, a threshold von Mises stress of 40.9 to 46.6 MPa was found to indicate skull fracture …

Use Of Vibrotactile Feedback And Stochastic Resonance For Improving Laparoscopic Surgery Performance, Robert Douglas Hoskins

Browse all Theses and Dissertations

Vibrotactile feedback, used as sensory substitution for loss of haptic feedback, has been utilized to improve performance in manual control, teleoperation and during minimally invasive surgical tasks. Stochastic resonance (SR), introduced into the human control system as white noise at a sub-threshold level, has shown promise to improve the sensitivity of tactile receptors resulting in enhancement of performance for a variety of manual tracking and sensorimotor tasks. The purpose of this study was to determine if SR could improve performance (accuracy, speed) in a simulated laparoscopic palpation task and to compare it to vibrotactile feedback (VIB). It was hypothesized that …

Design Of Thermal Structures Using Topology Optimization, Joshua D. Deaton

Browse all Theses and Dissertations

The design of structures subjected to elevated temperature environments has long been an important area of study in the aerospace industry. This is especially true in the modern day, where new problems related to embedded engine aircraft and high temperature exhaust-washed structures present new structural design challenges not found in past applications. In this work, the response of a class of thermal structures whose responses are characterized by significant amounts of restrained expansion, to which exhaust-washed structures belong, are studied. To address the complex design challenges that become evident in these investigations, structural topology optimization is applied due to its …

The Properties Of Property Alignment On The Semantic Web, Michelle Andreen Cheatham

Browse all Theses and Dissertations

Ontology alignment is an important step in enabling computers to query and reason across the many linked datasets on the semantic web. This is a difficult challenge because the ontologies underlying different linked datasets can vary in terms of subject area coverage, level of abstraction, ontology modeling philosophy, and even language. The alignment approach presented here centers on string similarity metrics. Nearly all ontology alignment systems use a string similarity metric in one form or another, but it seems that the choice of a particular metric is often arbitrary. We begin this dissertation with the most comprehensive survey to date …

End-To-End Classification Process For The Exploitation Of Vibrometry Data, Ashley Nicole Smith

Browse all Theses and Dissertations

Laser vibrometry provides a method to identify running vehicles' unique signatures using non-contact measurements. A vehicle's engine, size, materials, shape, and other attributes affect its vibration signature. To develop the capability to classify and identify these signatures, a robust aided target recognition (AiTR) end-to-end process is evaluated and expanded. The main challenge in classifying a vehicle's vibration signatures is presented by the operating conditions and parameters that vary as a function of sensor, environment, and collection locations on the target, among others. Some of the parameters affecting the vibration signatures include weather, terrain, sensor location, sensor type, and engine speed. …

Flash Hydrolysis Of Microalgae Biomass For Biofuels Intermediates Production, Protein Extraction, And Nutrients Recycle, Jose Luis Garcia Moscoso

Civil & Environmental Engineering Theses & Dissertations

Microalgae have shown much higher growth rates and productivity when compared to conventional agricultural crops, aquatic plants and tree species, requiring much less land area than other biodiesel feedstock. To harness that potential the hydrothermal liquefaction of algae biomass was studied and a new process called "Flash Hydrolysis" was developed to use water under subcritical conditions, this process capitalizes on the difference in reaction kinetics of algae polymeric components and fractionates proteins in liquid phase in seconds of residence time.

The main objectives for this study are: Analyze the effect of temperature in FH process to maximize the extraction of …

Association Between Vitamin D Receptor Gene Polymorphisms (Fok1 And Bsm1) And Osteoporosis: A Systematic Review, Zahra Mohammadi, Fateme Fayyazbakhsh, Mehdi Ebrahimi, Mahsa M. Amoli, Patricia Khashayar, Mahboubeh Dini, Reza Nezam Zadeh, Abbasali Keshtkar, Hamid Reza Barikani

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Osteoporosis is a Health Concern Characterized by Reduced Bone Mineral Density (BMD) and Increased Risk of Fragility Fractures. Many Studies Have Investigated the Association between Genetic Variants and Osteoporosis. Polymorphism and Allelic Variations in the Vitamin D Receptor Gene (VDR) Have Been Found to Be Associated with Bone Mineral Density. However, Many Studies Have Not Been Able to Find This Association. Literature Review Was Conducted in Several Databases, Including MEDLINE/Pubmed, Scopus, EMBASE, Ebsco, Science Citation Index Expanded, Ovid, Google Scholar, Iran Medex, Magiran and Scientific Information Database (SID) for Papers Published between 2000 and 2013 Describing the Association between Fok1 …

Fault-Tolerant Trajectory Tracking Of Unmanned Aerial Vehicles Using Immunity-Based Model Reference Adaptive Control, Brenton K. Wilburn

Graduate Theses, Dissertations, and Problem Reports (ETD)

This dissertation presents the design, development, and simulation testing of an adaptive trajectory tracking algorithm capable of compensating for various aircraft subsystem failures and upset conditions. A comprehensive adaptive control framework, here within referred to as the immune model reference adaptive control (IMRAC) algorithm, is developed by synergistically merging core concepts from the biologically- inspired artificial immune system (AIS) paradigm with more traditional optimal and adaptive control techniques. In particular, a model reference adaptive control (MRAC) algorithm is enhanced with the detection and learning capabilities of a novel, artificial neural network augmented AIS scheme. With the given modifications, the MRAC …