Digital Commons Network^™

Development Of Confocal Imaging Techniques For Probing Interfacial Dynamics In Microscale, Gas-Liquid, Two-Phase Flow, Joseph E. Hernandez

Dissertations, Master's Theses and Master's Reports - Open

Micro-scale, two-phase flow is found in a variety of devices such as Lab-on-a-chip, bio-chips, micro-heat exchangers, and fuel cells. Knowledge of the fluid behavior near the dynamic gas-liquid interface is required for developing accurate predictive models. Light is distorted near a curved gas-liquid interface preventing accurate measurement of interfacial shape and internal liquid velocities. This research focused on the development of experimental methods designed to isolate and probe dynamic liquid films and measure velocity fields near a moving gas-liquid interface. A high-speed, reflectance, swept-field confocal (RSFC) imaging system was developed for imaging near curved surfaces.

Experimental studies of dynamic gas-liquid …

State-And-Transition Modeling And Adaptive Management: Tools For Future Co-Development Of Madagascar’S Natural Resources And People, Patrick Thomas Spencer

Dissertations, Master's Theses and Master's Reports - Open

Madagascar’s terrestrial and aquatic ecosystems have long supported a unique set of ecological communities, many of whom are endemic to the tropical island. Those same ecosystems have been a source of valuable natural resources to some of the poorest people in the world. Nevertheless, with pride, ingenuity and resourcefulness, the Malagasy people of the southwest coast, being of Vezo identity, subsist with low development fishing techniques aimed at an increasingly threatened host of aquatic seascapes. Mangroves, sea grass bed, and coral reefs of the region are under increased pressure from the general populace for both food provisions and support of …

Thickness Measurement Of Dynamic Thin Liquid Films Generated By Plug-Annular Flow In Non-Wetting Microchannels, David C. Deisenroth

Dissertations, Master's Theses and Master's Reports - Open

Surface tension forces are significant at millimeter length-scales, causing profoundly different flow morphologies in microchannels than in macroscale flows. The existence and morphology of thin liquid films is particularly relevant for predicting performance and operational stability of devices containing microscale two phase flows. Analytical, computational, and experimental methods previously employed in the study of thin liquid films are discussed. Thicknesses before and after a novel film morphology, referred to as a `shock,' are measured with a novel film thickness measurement technique that uses confocal microscopy. Film thicknesses predicted by previous work are compared to experimental results. Methods for increasing the …

Electrocatalytic Processing Of Renewable Biomass-Derived Compounds For Production Of Chemicals, Fuels And Electricity, Le Xin

Dissertations, Master's Theses and Master's Reports - Open

The dual problems of sustaining the fast growth of human society and preserving the environment for future generations urge us to shift our focus from exploiting fossil oils to researching and developing more affordable, reliable and clean energy sources. Human beings had a long history that depended on meeting our energy demands with plant biomass, and the modern biorefinery technologies realize the effective conversion of biomass to production of transportation fuels, bulk and fine chemicals so to alleviate our reliance on fossil fuel resources of declining supply. With the aim of replacing as much non-renewable carbon from fossil oils with …

Morphology And Mixing State Of Atmospheric Particles: Links To Optical Properties And Cloud Processing, Swarup China

Dissertations, Master's Theses and Master's Reports - Open

Atmospheric particles are ubiquitous in Earth’s atmosphere and impact the environment and the climate while affecting human health and Earth’s radiation balance, and degrading visibility. Atmospheric particles directly affect our planet’s radiation budget by scattering and absorbing solar radiation, and indirectly by interacting with clouds. Single particle morphology (shape, size and internal structure) and mixing state (coating by organic and inorganic material) can significantly influence the particle optical properties as well as various microphysical processes, involving cloud-particle interactions and including heterogeneous ice nucleation and water uptake. Conversely, aerosol cloud processing can affect the morphology and mixing of the particles. For …

Design And Application Of Wireless Passive Magnetoelastic Resonance And Magnetoharmonic Force Sensors, Brandon D. Pereles

Dissertations, Master's Theses and Master's Reports - Open

The objective of the work described in this dissertation is the development of new wireless passive force monitoring platforms for applications in the medical field, specifically monitoring lower limb prosthetics. The developed sensors consist of stress sensitive, magnetically soft amorphous metallic glass materials. The first technology is based on magnetoelastic resonance. Specifically, when exposed to an AC excitation field along with a constant DC bias field, the magnetoelastic material mechanically vibrates, and may reaches resonance if the field frequency matches the mechanical resonant frequency of the material. The presented work illustrates that an applied loading pins portions of the strip, …

Fabrication Of Drug Eluting Ti Implants For Dental/Orthopedic Applications, Azhang Hamlekhan

Dissertations, Master's Theses and Master's Reports - Open

Titanium and its alloys are typically used for fabrication of dental and orthopedic implants as they possess various desirable properties including biocompatibility and corrosion resistance. In spite of such benefits, titanium implants show lack of osseointegration after surgery in minor cases. The objective of this research has been to modify the surface of titanium alloy for medical applications through increasing surface hydrophilicity and drug loading. Primarily, anodization method is employed for fabrication of nanotubes on titanium surface to act as anchoring cite for cells.

Considering the key role of surface hydrophilicity on cellular attachment to the surface and subsequent biological …

Flow Measurement Options For Canal Turnouts, Kyle Feist, Charles M. Burt

BioResource and Agricultural Engineering

Volumetric record-keeping, billing, and allocations at irrigation district delivery points (turnouts) are the norm, rather than the exception for most California irrigation districts. However, many older districts are just beginning these efforts, and other districts are trying to improve existing hardware and procedures. Volumetric accounting with high accuracy and a reasonable price presents unique engineering challenges for irrigation districts because of the variety of existing structures and configurations at irrigation delivery points. Because it is likely that irrigation districts will attempt to utilize existing devices, or slightly modify them, there is a need for standardized installation and/or calibration. This paper …

Control Design And Performance Analysis For Autonomous Formation Flight Experiments, Caleb M. Rice

Graduate Theses, Dissertations, and Problem Reports (ETD)

Autonomous Formation Flight is a key approach for reducing greenhouse gas emissions and managing traffic in future high density airspace. Unmanned Aerial Vehicles (UAV’s) have made it possible for the physical demonstration and validation of autonomous formation flight concepts inexpensively and eliminates the flight risk to human pilots. This thesis discusses the design, implementation, and flight testing of three different formation flight control methods, Proportional Integral and Derivative (PID); Fuzzy Logic (FL); and NonLinear Dynamic Inversion (NLDI), and their respective performance behavior. Experimental results show achievable autonomous formation flight and performance quality with a pair of low-cost unmanned research fixed …

A Decision Framework For Optimal Pairing Of Wind And Demand Response Resources, C. Lindsay Anderson, Judith Cardell

Engineering: Faculty Publications

Day-ahead electricity markets do not readily accommodate power from intermittent resources such as wind because of the scheduling difficulties presented by the uncertainty and variability in these resources. Numerous entities have developed methods to improve wind forecasting and thereby reduce the uncertainty in a day-ahead schedule for wind power generation. This paper introduces a decision framework for addressing the inevitable remaining variability resulting from imperfect forecasts. The framework uses a paired resource, such as demand response, gas turbine, or storage, to mitigate the generation scheduling errors due to wind forecast error. The methodology determines the cost-effective percentage, or adjustment factor, …

Apelin Regulation Of K-Cl Cotransport In Vascular Smooth Muscle Cells., Neelima Sharma

Browse all Theses and Dissertations

Atherosclerosis and high circulating levels of oxidized low density lipoproteins (oxLDL) are considered among the most important risk factors for the occurrence and development of cardiovascular disease (CVD). During the atherosclerotic lesion repair, phenotypic transition of vascular smooth muscle cells (VSMCs) from contractile to synthetic states plays a central role. In this process, enhanced proliferation/migration of VSMCs, from the tunica media to the intima, is required to sustain blood vessel endothelium integrity, and for inducing vessel wall remodeling in response to injury. At the molecular level, the activity of electroneutral potassium-chloride cotransporters or KCCs, is necessary to: a) allow changes …

Cognitive Challenges To Resilience Dynamics In Managing Large- Scale Event Response, Barrett S. Caldwell

School of Industrial Engineering Faculty Publications

In early 2014, a number of large-scale adverse weather events in the United States (and elsewhere) have renewed discussions of event response and resilience. Unlike events caused by human error or malicious intent, adverse natural events can be seen as uncontrolled and unpreventable; the measure of response success is the mitigation of adverse and disastrous effects. However, significant cognitive limitations interfere with human decision makers’ ability to effectively estimate likelihood, magnitude, and effective response of large-scale events in the face of multiple forms of uncertainty and system dependencies. Some authors highlight stability and maintenance of original design capability as …

A Compact Theory Of Magnetic Nerve Stimulation: Predicting How To Aim, Charles F. Babbs

Weldon School of Biomedical Engineering Faculty Publications

Background: A compact theory that predicts quantitatively when and where magnetic neurostimulation will occur is needed as a guide to therapy, ideally providing a single equation that defines the target volume of tissue excited by single or dual coils. Methods: A first-principles analysis of magnetic stimulation incorporating a simplified description of electromagnetic fields and a simplified cable theory of the axon yields a mathematical synthesis predicting how to aim. Results: Nerve stimulation produced by a single circular coil having one or more closely packed turns occurs in donut shaped volume of tissue beneath the coil. Axons spanning several millimeters are …

Noninvasive Measurement Of Cardiac Stroke Volume Using Pulse Wave Velocity And Aortic Dimensions: A Simulation Study, Charles F. Babbs

Weldon School of Biomedical Engineering Faculty Publications

Background: Concerns about the cost-effectiveness of invasive hemodynamic monitoring in critically ill patients using pulmonary artery catheters motivate a renewed search for effective noninvasive methods to measure stroke volume. This paper explores a new approach based on noninvasively measured pulse wave velocity, pulse contour, and ultrasonically determined aortic cross sectional area. Methods: The Bramwell-Hill equation relating pulse wave velocity to aortic compliance is applied. At the time point on the noninvasively measured pulse contour, denoted th, when pulse amplitude has fallen midway between systolic and diastolic values, the portion of stroke volume remaining in the aorta, and in turn the …

Choosing Inclusion Criteria That Minimize The Time And Cost Of Clinical Trials, Charles F. Babbs

Weldon School of Biomedical Engineering Faculty Publications

AIM: To present statistical tools to model and optimize the cost of a randomized clinical trial as a function of the stringency of patient inclusion criteria. METHODS: We consider a two treatment, dichotomous outcome trial that includes a proportion of patients who are strong responders to the tested intervention. Patients are screened for inclusion using an arbitrary number of test results that are combined into an aggregate suitability score. The screening score is regarded as a diagnostic test for the responsive phenotype, having a specific cutoff value for inclusion and a particular sensitivity and specificity. The cutoff is a measure …

Influence Of Decision Making During Disasters And How It Impacts A Community, Jayanrtha Withanaarachchi, Sujeeva Setunge

International Institute for Infrastructure Resilience and Reconstruction (I3R2) Conference

The frequency of natural disasters occurrences has increased and is becoming noticed by many due to the impact on economy, society, and the environment.

Decision making during disasters contributes towards community safety and resilience. Decisions taken to protect people from disasters have an impact on society, economy, environment, travel patterns, and reliability and performance of transport networks.

Decisions often affect the performance of transport networks and critical infrastructure systems during disasters and during demand times. Decision making and decision styles which were observed during disaster events will show the areas that the decisions have worked well or created more risks …

Selecting A Temporary Debris Management Site For Effective Debris Removal, Jooho Kim, Abhijeet Deshmukh, Makarand Hastak

International Institute for Infrastructure Resilience and Reconstruction (I3R2) Conference

The overall debris removal after disasters is often prolonged due to the huge amount of debris and lack of capacities such as a Temporary Debris Management Site (TDMS) in the community. This results in a delay of overall recovery and increases the total recovery cost. Strategic planning and building a TDMS will help in providing extra time for proper disposal of debris and clearing a disaster-impacted site that will facilitate the reconstruction process. This paper presents a unique approach for identifying and selecting TDMS locations for expediting debris removal from the community. A hypothetical example of a community impacted by …

Strain Modulations As A Mechanism To Reduce Stress Relaxation In Laryngeal Tissues, Eric J. Hunter, Thomas Siegmund, Roger W. Chan

School of Mechanical Engineering Faculty Publications

Vocal fold tissues in animal and human species undergo deformation processes at several types of loading rates: a slow strain involved in vocal fold posturing (on the order of 1 Hz or so), cyclic and faster posturing often found in speech tasks or vocal embellishment (1–10 Hz), and shear strain associated with vocal fold vibration during phonation (100 Hz and higher). Relevant to these deformation patterns are the viscous properties of laryngeal tissues, which exhibit non-linear stress relaxation and recovery. In the current study, a large strain time-dependent constitutive model of human vocal fold tissue is used to investigate effects …

The Application Of Graphene Films In Biosensing And Electrowetting, Xuebin Tan

Wayne State University Dissertations

In recent years, graphene has been found to possess extraordinary electronic, optical, mechanical and electrochemical properties. Graphene is optically transparent and mechanically flexible, and has high electron mobility and conductivity. In this thesis, we propose to investigate graphene's properties in the detection of biomolecules as well as the manipulation of biological samples. Graphene without defects has high charge carrier mobility and surface areas, which is ideal for biosensors. However, literature shows a lot of variations in the measurements using graphene biosensors. In addition, the surface functionalization of graphene in order to enhance the specificity has not been fully investigated yet. …

Dual Delivery Systems Based On Polyamine Analog Benspm As Prodrug And Gene Delivery Vectors, Yu Zhu

Wayne State University Dissertations

Combination drug and gene therapy shows promise in cancer treatment. However, the success of such strategy requires careful selection of the therapeutic agents, as well as development of efficient delivery vectors. BENSpm (N1, N11-bisethylnorspermine), a polyamine analogue targeting the intracellular polyamine pathway, draws our special attention because of the following reasons: (1) polyamine pathway is frequently dysregulated in cancer; (2) BENSpm exhibits multiple functions to interfere with the polyamine pathway, such as to up-regulate polyamine metabolism enzymes and down-regulate polyamine biosynthesis enzymes. Therefore BENSpm depletes all natural polyamines and leads to apoptosis and cell growth inhibition in a wide range …

Finite Element Analysis Of Shear Resistant Mechanisms For Biolaminate Interfaces, Matthew Nelms

Electronic Theses and Dissertations

The Alligator gar possesses a flexible dermal armor consisting of overlapping ganoid scales. Each scale is a bilayer hydroxyapatite and collagen-based bio-laminate for protection against predation. The exoskeleton fish scale is comprised of a stiff outer ganoine layer, a characteristic "sawtooth" pattern at the interface and a compliant bone inner layer with all materials exhibiting a decreasing elastic modulus, yield strength and density through the thickness. Experiments on ganoid scales revealed properties such as damage mitigation and energy dissipation that are unique to biological dermal armor. The objective of this investigation is to develop a fundamental understanding of the stress …

Non-Oxide Porous Ceramics From Polymer Precursor, Xueping Yang

Electronic Theses and Dissertations

Non-oxide porous ceramics exhibit many unique and superior properties, such as better high-temperature stability, improved chemical inertness/corrosive resistance, as well as wide band-gap semiconducting behavior, which lead to numerous potential applications in catalysis, high temperature electronic and photonic devices, and micro-electromechanical systems. Currently, most mesoporous non-oxide ceramics (e.g. SiC) are formed by two-step templating methods, which are hard to adjust the pore sizes, and require a harmful etching step or a high temperature treatment to remove the templates. In this dissertation, we report a novel technique for synthesizing hierarchically mesoporous non-oxide SiC ceramic from a block copolymer precursor. The copolymer …

Nebraska Summary: S944 Case-Ih Farmall 115c, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2101: John Deere 8320r, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2089: Challenger Mt775e, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2082: John Deere 7210r, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2097: New Holland T9.565, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2096a: New Holland T9.600, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2100: John Deere 8295r, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2096: Case Ih Steiger 540, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …