Digital Commons Network^™

A Study Of Radiofrequency Cardiac Ablation Using Analytical And Numerical Techniques, Ryan Todd Roper

Theses and Dissertations

Studies on radiofrequency (RF) ablation are often aimed at accurately predicting tissue temperature distributions by numerical solution of the bioheat equation. This thesis describes the development of an analytical solution to serve as a benchmark for subsequent numerical solutions. The solution, which was obtained using integral transforms, has the form of a surface integral nested within another surface integral. An integration routine capable of evaluating such integrals was developed and a C program was written to implement this routine. The surface integration routine was validated using a surface integral with a known analytical solution. The routine was, then, used to …

Day 4. Thursday, August 14, 2003: Hayden Power Plant, University Of Colorado Boulder. Natural Resources Law Center

Energy Field Tour 2003 (August 11-16)

5 pages (includes color illustrations and maps).

Contains references.

Secure Remote Control And Configuration Of Fpx Platform In Gigabit Ethernet Environment, Haoyu Song

All Computer Science and Engineering Research

Because of its flexibility and high performance, reconfigurable logic functions implemented on the Field-programmable Port Extender (FPX ) are well suited for implementing network processing such as packet classification, filtering and intrusion detection functions. This project focuses on two key aspects of the FPX system. One is providing a Gigabit Ethernet interface by designing logic for a FPGA which is located on a line card. Address Resolution Protocol (ARP) packets are handled in hardware and Ethernet frames are processed and transformed into cells suitable for standard FPX application. The other effort is to provide a secure channel to enable remote …

Incorporating Functionally Graded Materials And Precipitation Hardening Into Microstructure Sensitive Design, Mark Edward Lyon

Theses and Dissertations

The methods of MSD are applied to the design of functionally graded materials. Analysis models are presented to allow the design of compliant derailleur for a case study and constraints are placed on the design. Several methods are presented for relating elements of the microstructure to the properties of the material, including Taylor yield theory, Hill elastic bounds, and precipitation hardening.

Applying n-point statistics to the MSD framework is also discussed. Some results are presented for the information content of the 2-point correlation statistics that follow from the methods used to integrate functionally graded materials into MSD.

For the compliant …

Design And Analysis Of End-Effector Systems For Scribing On Silicon, Bennion Rhead Cannon

Theses and Dissertations

This thesis investigates end-effector systems used in a chemomechanical scribing process. Chemomechanical scribing is a method of patterning silicon to selectively deposit a monolayer of material on the surface of the silicon. This thesis details the development of a unique end-effector for chemomechanical scribing using a compliant mechanism solution. The end-effector is developed to scribe lines that have uniform geometry and produce less chipping on the surface of the silicon. The resulting scribing mechanism is passively controlled, has high lateral stiffness, and low axial stiffness. The mechanism is analyzed using the pseudo-rigid-body model and linear-elastic beam method to determine the …

Diffuser Optimation At Exhaust System With Catalytic Converter For 110 Cc Mopet With Fluid Flow Cfd Simulation, Tresna P. Soemardi, Ahmad Indra Siswantara, Erwin Erwin

Makara Journal of Technology

Diffuser Optimation at Exhaust System with Catalytic Converter for 110 cc Mopet with Fluid Flow CFD Simulation. CFD simulation used to get behavior of exhaust gas through catalyst, this result will be used to optimize geometry form to perform uniform stream distribution to catalyst, and CFD Simulation will used to analyze backpressure that happened at the model.

Capacity Of High-Speed Powerline Communication In Vehicles, Deny Hamdani, Ery Safrianti

Makara Journal of Technology

Powerline Communication (PLC) Systems intents to use the mains network in vehicles for high-speed data transmission. Carrier frequencies in the range of MHz are required to establish data rates of some megabits per second. In this paper, typical reference channels extracted from channel measurements are presented and computation results of their capacities according to Shannon’s theorem are presented. Furthermore, the effect of limitations of frequency range and power spectral density of transmitted signal on achievable capacity is investigated. This paper outlines an assessment for theoretical channel capacity and achievable data rates of vehicular PLC transmission schemes. Finally, EMC (Electromagnetics Compatibility) …

Ultrasound Technique For Prediction Of Statistical Characteristics Of Grid-Generated Turbulence, Tatiana A. Andreeva, William W. Durgin

Office of the Provost Scholarship

Ultrasonic measurement techniques can be used to determine some characteristics of turbulent flows. In this work measurements of the difference in propagation times of ultrasonic waves along two paths are combined with the Kolmogorov (²/₃)-power law to study characteristics of grid-generated turbulence. The paper focuses on ultrasonic measurements of turbulent flow using the travel-time technique. The present research is of interest from two points of view. First, it demonstrates an ultrasonic method of investigation of turbulence, and second, it furthers understanding of the effect of turbulence on sound propagation.

Revisiting The Fresnel Coefficients For Uniform Plane Wave Propagation Across A Nonchiral, Reciprocal And Chiral, Nonreciprocal Interface, Monish Ranjan Chatterjee, Sumit Nema

Electrical and Computer Engineering Faculty Publications

The problem of EM wave propagation in non-reciprocal chiral media has been studied by several investigators. In a recent approach, a dual-transform technique has been developed to study the problem of such propagation under paraxial and slow-envelope variation conditions.

In this paper, we first outline some of the results obtained using the dual transform technique for arbitrary boundary conditions within the left boundary of a semi-infinite, non-reciprocal chiral medium for a uniform plane wave, and a fundamental Gaussian-profiled beam. Next, we explore the problem of a uniform EM wave incident at an oblique angle at an interface between a reciprocal, …

Modeling Corrosion In Oxygen Controlled Lbe Systems With Coupling Of Chemical Kinetics And Hydrodynamics - Phase Three, Samir Moujaes, Yitung Chen

Transmutation Sciences Materials (TRP)

The proposed work will combine chemical kinetics and hydrodynamics in target and test-loop lead-bismuth eutectic (LBE) systems to model system corrosion effects. This approach will result in a predicative tool that can be validated with corrosion test data, used to systematically design tests and interpret the results, and provide guidance for optimization in LBE system designs. The task includes two subtasks. The first subtask is to try to develop the necessary predictive tools to be able to predict the levels of oxygen and corrosion products close to the boundary layer through the use of Computational Fluid Dynamics (CFD) modeling. The …

Volumetric Growth Of Thermoelastic Materials And Mixtures, Stephen M. Klisch, Anne Hoger

Mechanical Engineering

The proteoglycan and collagen constituents of cartilage serve distinct mechanical roles. Changes to the mechanical loading conditions during cartilage growth lead to changes in the concentrations of these molecules and, consequently, the mechanical properties. The main aim of this paper is to present a theory that can describe the mechanical aspects of cartilage growth. The model for cartilage growth is based on a general thermomechanical theory for a mixture of an arbitrary number of growing elastic constituents and an inviscid fluid. Our development of a growth mixture theory is accomplished in two steps. First, the thermodynamics of growing elastic materials …

Modeling Of Short-Gap Esd Under Consideration Of Different Discharge Mechanisms, S. Bonisch, Wilifried Kalkner, David Pommerenke

Electrical and Computer Engineering Faculty Research & Creative Works

Simulation of short gap electrostatic discharge (ESD) in air needs to consider two processes: a surface process and an avalanche process. Two models, a phenomenological approach and a physical approach, considering both discharge processes are proposed for the simulation of short-gap ESD. A new mathematical derivation for the modeling of the surface process is discussed in detail. A new technique to combine surface and avalanche process models is described. Measured and simulated data based on short-gap ESD are provided and compared. Advantages and drawbacks of the proposed models are discussed. Attained results should help to optimize ESD testing.

Fdtd Modeling Of Isotropic Dispersive Magnetic Materials, Jing Wu, Marina Koledintseva, James L. Drewniak, David Pommerenke

Electrical and Computer Engineering Faculty Research & Creative Works

Numerical analysis using the finite-difference time-domain (FDTD) algorithm with a piecewise linear recursive convolution (PLRC) procedure for linear isotropic dispersive magnetic materials is presented. The frequency dependence of susceptibility used for this algorithm is represented in Debye, narrowband Lorentzian, and wideband Lorentzian forms, depending on the ratio of the resonance frequency and the resonance line width. Some numerical examples along with measurements are provided.

Modeling Issues For Full-Wave Numerical Emi Simulation, Michael A. Cracraft, Xiaoning Ye, Chen Wang, Sandeep K. R. Chandra, James L. Drewniak

Electrical and Computer Engineering Faculty Research & Creative Works

In electromagnetic modeling, agreement between modeling and measurements is a common goal. There are questions that define every model. What is to be modeled? How is it going to be modeled? At what scale is it to be modeled? Through sample results and discussion, this paper addresses some general and some specific elements of model veracity. Through determination, numerical models can certainly be pushed to match any measured results. However, in the end the question that this paper addresses is not necessarily "How good can this model be?" as it is "Is this model good enough?".

Reconstruction Of The Parameters Of Debye And Lorentzian Dispersive Media Using A Genetic Algorithm, Jianmin Zhang, Marina Koledintseva, Giulio Antonini, James L. Drewniak, Konstantin Rozanov, Antonio Orlandi

Electrical and Computer Engineering Faculty Research & Creative Works

A method for reconstruction of the parameters of the Debye or Lorentzian dispersive media is proposed. In this method, S-parameters of a simple parallel-plate fixture filled with the dispersive medium are measured and modeled using the transmission line equations, provided a single TEM mode propagating in this parallel-plate waveguide. The genetic algorithm is used for searching the parameters of the dispersive medium by means of minimizing the discrepancy between the measured and modeled S-parameters. The results are verified using the full-wave FDTD modeling technique.

Elastic Wave Propagation And Scattering In Solids With Uniaxially Aligned Cracks, Liyong Yang, Joseph A. Turner

Nebraska Center for Materials and Nanoscience: Faculty Publications

In this article, elastic wave propagation and scattering in a solid medium permeated by uniaxially aligned penny-shaped microcracks are studied. The crack alignment refers to the case in which the unit normals of all cracks are randomly oriented within a plane of isotropy. The analysis is restricted to the limit of the noninteraction approximation among individual cracks. Explicit expressions for attenuations and wave speeds of the shear horizontal, quasilongitudinal, and quasishear vertical waves are obtained using stochastic wave theory in a generalized dyadic approach. The ensemble average elastic wave response is governed by the Dyson equation, which is solved in …

Evaluation Of Kentucky’S “Buckle Up Kentucky: It’S The Law & It’S Enforced” Campaign, Kenneth R. Agent, Eric R. Green, Ronald E. Langley

Kentucky Transportation Center Research Report

The objective of this report was to document the results of the “Buckle Up Kentucky: It’s the Law & It’s Enforced” campaign in Kentucky. The campaign involved a combination of earned media, paid media, and enforcement. The earned media started about three weeks prior to Memorial Day 2003 and continued through the enforcement period. The paid media started about two weeks prior to Memorial Day. The enforcement period was a two-week period including the week before and the week of Memorial Day.

The evaluation of the campaign included documenting the activities associated with the program (publicity and enforcement) and evaluating …

Modeling Electromagnetic Wave Propagation In Electrically Large Structures, Jon Wallace

Theses and Dissertations

Existing unified numerical electromagnetic methods are often unable to analyze electrically large structures due to the amount of memory and processing power required, necessitating approximate analyses with limited applicability. In this research a hybrid modeling methodology is adopted to solve these complex problems more efficiently than unified numerical methods and more accurately than analytical methods. Electromagnetic modeling problems are divided into two or more levels of scale. Each level analyzes a specific level of detail and only promotes the required information to the next level. The method is demonstrated by successful application to three important problems: (1) remote sensing of …

45th Rocky Mountain Conference On Analytical Chemistry

Rocky Mountain Conference on Magnetic Resonance

Final program, abstracts, and information about the 45th annual meeting of the Rocky Mountain Conference on Analytical Chemistry, co-endorsed by the Colorado Section of the American Chemical Society and the Rocky Mountain Section of the Society for Applied Spectroscopy. Held in Denver, Colorado, July 27-31, 2003.

Cross-Layer Protocols Optimized For Real-Time Multimedia Services In Energy-Constrained Mobile Ad Hoc Networks, William S. Hortos

Electrical Engineering and Computer Science Faculty Publications

The optimization of cross-layer protocols for real-time multimedia services in energy-constrained mobile ad hoc networks (MANET) was presented. The cross-layer optimization was based on stochastic dynamic programming conditions derived from time-dependent models of MANET packet flows. The performance of the optimized cross-layer protocols was also determined by using dynamic programming conditions.

Analysis And Design Of Surface Micromachined Micromanipulators For Out-Of-Plane Micropositioning, Kimberly A. Jensen

Theses and Dissertations

This thesis introduces two ortho-planar MEMS devices that can be used to position microcomponents: the XZ Micropositioning Mechanism and the XYZ Micromanipulator. The displacement and force relationships are presented. The devices were fabricated using surface micromachining processes and the resulting mechanisms were tested. A compliant XYZ Micromanipulator was also designed to reduce backlash and binding. In addition, several other MEMS positioners were fabricated and tested: the Micropositioning Platform Mechanism (MPM), the Ortho-planar Twisting Micromechanism (OTM), and the Ortho-planar Spring Micromechanism (OSM).

Short Pulse Laser Propagation Through Tissues, Champak Das, Ashish Trivedi, Kunal Mitra, Tuan Vo-Dinh

Biomedical Engineering and Sciences Faculty Publications

An experimental and numerical study is performed to analyze short pulse laser propagation through tissue phantoms without and with inhomogeneities/tumors imbedded in it. Short pulse laser probing techniques has distinct advantages over conventional very large pulse width or cw lasers primarily due to the additional information conveyed about the tissue interior by the temporal variation of the observed signal. Both the scattered temporal transmitted and reflected optical signals are measured experimentally using a streak camera for samples irradiated with a short pulse laser source. Parametric study involving different scattering and absorption coefficients of tissue phantoms and inhomogeneities as well as …

Adaptive Live Video Streaming By Priority Drop, Jie Huang, Charles Krasic, Jonathan Walpole

Computer Science Faculty Publications and Presentations

In this paper we explore the use of Priority-progress streaming (PPS) for video surveillance applications. PPS is an adaptive streaming technique for the delivery of continuous media over variable bit-rate channels. It is based on the simple idea of reordering media components within a time window into priority order before transmission. The main concern when using PPS for live video streaming is the time delay introduced by reordering. In this paper we describe how PPS can be extended to support live streaming and show that the delay inherent in the approach can be tuned to satisfy a wide range of …

Real-Time Adaptive Cancellation Of Satellite Interference In Radio Astronomy, Andrew Joseph Poulsen

Theses and Dissertations

Radio astronomy is the science of observing the heavens at radio frequencies, from a few kHz to approximately 300 GHz. In recent years, radio astronomy has faced a growing interference problem as radio frequency (RF) bandwidth has become an increasingly scarce commodity. A programmable real-time DSP least-mean-square interference canceller was developed and demonstrated as a successful method of excising satellite down-link signals from both an experimental platform at BYU, and the Green Bank Telescope at the National Radio Astronomy Observatory in West Virginia. A performance analysis of this cancellation system in the radio astronomy radio frequency interference (RFI) mitigation regime …

Texture And Residual Stresses On Nanocomposite Coatings, Hussam E. Aikhasawneh

Masters Theses

Nickel was electroplated on cold-rolled 2024-T3 aluminum. The coating was done with reinforcement by nanoparticles of y-alumina or silicon carbide. For comparison, nickel-only coatings were done too. Rectangular samples were coated in nickel sulfamate bath with no particles to determine the optimum coating conditions. The optimized parameters were the current density, time of coating, and agitation rate. After coating conditions were established, composite samples were coated using these conditions. The coated layer was characterized by measuring: thickness, residual stresses, and crystallographic preferred orientation. The coated layer was tested by SEM for evaluation of the quality of the coatings. The presence …

Development Of An Advanced Stem Heating Model, Joshua L. Jones

Theses and Dissertations

A new one-dimensional heat conduction model for predicting stem heating during fires is presented. The model makes use of moisture and temperature dependent thermal properties for bark and wood. Also, the thermal aspects of the processes of bark swelling, desiccation, and devolatilization are treated in an approximate fashion. Simulation with a surface flux boundary condition requires that these phenomena be accounted for. Previous models have used temperature-time boundary conditions, which prevents them from being directly coupled to fire behavior models. This model uses a flux-time profile for its boundary condition, making it possible to eventually couple it to fire behavior …

Efficacy Of Speed Monitoring Displays In Increasing Speed Limit Compliance In Highway Work Zones, Jeanne Marie Bowie

Theses and Dissertations

Safety in highway work zones has become a concern among Departments of Transportation (DOTs) throughout the country as the highway network has begun to age and more maintenance and construction work has been necessary. Safety in highway work zones is more compromised than in other areas for two reasons. First, the construction workers are near traveling vehicles as they perform their already dangerous work, increasing the risk of an accident. Second, the highway user is at increased risk because of the increase in roadside obstacles, because other vehicles are more likely to act in unpredictable ways (such as sudden braking …

Moving Screw Dislocations In Piezoelectric Bimaterials, Xiangfa Wu, Yuris A. Dzenis, Wen-Sheng Zou

Department of Engineering Mechanics: Faculty Publications

An explicit solution for a moving screw dislocation in a piezoelectric bimaterial is given by means of complex variables. The electroelastic fields and forces acting on the moving dislocation are obtained in closed form. As special cases, solutions for a moving screw dislocation in a piezoelectric half-plane with a free or rigid surface are obtained explicitly.

The Conference Proceedings Of The 2003 Air Transport Research Society (Atrs) World Conference, Volume 1, Brent Bowen, Sveinn Gudmundsson, Tae Hoon Oum, Uno Aviation Institute

Faculty Books and Monographs

UNOAI Report 03-5

Technology Management For Reshaping The World, Dundar F. Kocaoglu, Timothy R. Anderson

Engineering and Technology Management Faculty Publications and Presentations

The world is changing rapidly, and technology is playing the central role in making the changes happen. The events since PICMET '01 have made it clear that every society everywhere in the world is affected not only by the changes, but also by the technology behind them. There are few events in the world today that are not dominated, or at least influenced, by technology. This observation can be explained by recognizing the current period in the history of the world as the "technology era." When technology is properly used and managed, it leads to the reshaping of the world …