Digital Commons Network^™

Thermal Stresses In Circular Plates Including The Effect Of Transverse Shear Deformation, An-Ton Liu

Masters Theses

"This thesis is an extension of the work of T. F. Lehnhoff which used the method suggested by Goodier to develop the Reissner-Goodier small displacement theory for plates subjected to lateral loading. The purpose of this work is to develop a more complete Reissner-Goodier small displacement theory for plates under general loadings, both lateral and thermal, and to provide a solution to the six governing coupled partial differential equations by using a process similar to that of Lehnhoff. Any loading, lateral and/or thermal, that satisfies the Dirichlet conditions of Fourier analysis and virtually any boundary conditions may be handled. Most …

Magnetohydrodynamic Stability Of Laminar Flow In The Entrance Region Of A Parallel-Plate Channel, Thomas Eldon Eaton

Masters Theses

"The hydrodynamic stability of laminar flow of an electrically conducting fluid flowing in a parallel-plate channel with an applied transverse magnetic field is investigated. The linear perturbation theory of hydrodynamic stability along with the assumption of low magnetic Reynolds number is applied to the governing equations to derive the governing rnagnetohydrodynarnic stability equation. A finite difference scheme is employed to numerically solve the magnetohydrodynamic stability equation. Neutral stability characteristics of the flow in the entrance region are obtained and presented. The neutral stability characteristics of the fully developed Hartmann flow are also re-examined and compared with those of a previous …

Dynamic Analysis Of A Torsional Vibration Actuator, Narayandas Trikamdas Ashar

Masters Theses

"The objective of this study is the evaluation of a mechanical system, which includes a Hooke's joint, as a possible torsional vibration actuator. The essential requirement of such a system is to produce a periodically varying angular motion superimposed upon a mean constant speed rotation. The basic kinematics of a Hooke's joint suggest that it could be used to generate the type of motion desired. The mechanical arrangement of a system incorporating a Hooke's joint is described and the governing differential equations are developed. These equations are simultaneous, differential equations of second order and are highly nonlinear. Values of typical …

Measurement Of The Surface Energy Of Rock By The Three-Point Bending Of Notched Beams, John Walter Corwine

Masters Theses

"In this investigation, the surface energy of a medium-grained igneous rock (Barre granite) was measured by breaking small, notched beams in bending. The technique was adapted from fracture toughness tests that have been used with metals and ceramics. The equations used for the calculation of surface energy were derived from several writers' equations for the stress intensity at the end of a notch in a beam subject to bending. Beam thickness, notch width and mineral occurring at the notch tip were evaluated for their influence on the calculated values of surface energy. The surface energy values obtained were used in …

Evaluation Of Cascaded Inertial Vibration Isolation Systems, Rajnikant Bhikhabhai Patel

Masters Theses

"Cascaded inertial vibration isolation systems are examined in this report. Systems employing one, two or three masses in series on isolators are investigated. The objective is to determine if the cascaded systems have appreciable advantages over the classical single mass system. The equations of motion for these systems are derived by applying Newton's second law of motion. The homogeneous and steady state sinusoidal excitation solutions have been established. Transmissibility of forces and moments to the foundation has been obtained for several cases of force excitation. Comparisons of the cases investigated are based upon the principal mode frequencies, mode shapes, center …

Vibration Of A Rotating Cantilever Beam With An Independently Rotating Disk On The Free End, Darrell Blaine Crimmins

Masters Theses

"This thesis provides a vibration analysis of a rotating cantilever beam with an independently rotating thin circular disk on the free end. The exact differential equations of the system as defined by classical Bernoulli-Euler beam theory are written using the methods of the calculus of variations. The exact equations are not solved, but two different approximations are found by assuming a cubic polynomial deflection curve and applying the equation of Lagrange. The solutions are restricted to small deflections of the beam and a shaft stiffness which permits a deflection in only a single plane. Nonlinear differential equations result in the …

Use Of Waste Glass As Asphaltic Concrete Aggregate, Charles Wayne Foster

Masters Theses

"The problem of solid waste disposal increases each year, with the annual growth in quantity of solid waste making the present means of disposal even more inadequate. Recycling of solid waste materials is an increasingly popular approach to the disposal problem. The glass component of solid waste is a very promising candidate for recycling, and this investigation studies the possibility of using waste glass as an aggregate for bituminous concrete mixtures. Objectives of this research were to determine whether a glass-asphalt mixture could be designed to meet the Marshall design criteria specified by The Asphalt Institute, to study the amount …

Multi-Stage Shear Testing Of A Cohesionless Soil, Robert Clyde Gullic

Masters Theses

"The multi-stage test is a procedure by which a soil's shear strength parameters can be evaluated by the use of a single sample of the material. The object of the investigation is to evaluate to what extent multi-stage testing can be used on a cohesionless material. Three types of tests, using conventional and multi-stage procedures are evaluated. They are: direct shear/consolidated drained, triaxial compression/consolidated drained and triaxial compression/consolidated undrained shear tests. It was found that multi-stage testing can easily be performed and the shear strength parameter theta_f obtained from these tests are in good agreement with those obtained from …

Chromatographic Determination Of Hydrocarbons Based On Retention Time Data For Squalene And Tetracyanoethylated Pentaerythritol Columns, Mehdi Honarpour

Masters Theses

"The purpose of this thesis is to investigate the theory that when several members of a homologous series are injected into a gas chromatograph, at a given flow rate and column temperature, the lograrithm of their retention time as a function of some increasing property of the homologous series may be presented as a straight line and to develop their equations. Experimental procedure was accomplished for the normal paraffin series with 7 1/2% squalene and 10% Tetracyanoethylated Pentaerythritol (T.C.E.pageE.) columns and the relation between retention time and carbon number was determined. The same type of development was employed for aromatic …

A Permeability Scaling Technique In The Numerical Simulation Of Water Coning, Virendra Kumar Dutta

Masters Theses

"A two-dimensional, two-phase, radial, horizontally layered water coning simulator was programmed for large memory digital computers. A permeability sealing technique is developed which allows the use of large size blocks as production blocks. As a result of this technique large time steps have been used without causing saturation instabilities around the well bore and the permeability scaling technique allows a more realistic simulation of a water cone. The IMPES method is used to calculate pressure and saturation in the system for each finite time step. The behaviour of the simulator is studied for various factors affecting the advance of a …

A Proposed Concept For The Rapid Field Design Of Protective Structures, John Ross Childress

Masters Theses

"This investigation proposes a simplified concept for the rapid field design of protective structures, subject to attack by conventional artillery rounds, mortar rounds and small rockets. Parameters which should be considered during a rigorous design process are discussed. The number and complexity of these parameters make the rigorous design procedure too unwieldy to be efficiently used, in a limited time period, when materials are not available to comply with Standard Designs. Since the duration of an explosion pulse is very short and uncompacted soil is capable of absorbing explosive energy, this study investigates the theory that adequate protection can be …

Simulation Of A Gas Storage Reservoir With Leakage By A Two-Dimensional Layered Mathematical Model, Steven William Ohnimus

Doctoral Dissertations

"A generalized mathematical model was developed for two-dimensional compressible fluid flow accounting for the effects of relative permeability capillary pressure, and gravity drainage in addition to the reservoir properties of rock heterogenity and reservoir geometry. The generalized model developed was applied to an aquifer gas storage reservoir in which vertical leakage occurred from the main reservoir to two adjacent overlaying zones. The experimental results of Thomas, et al. were utilized in applying the model to gas storage injection/withdrawal periods yielding reasonable results for the three layers"--Abstract, page ii.

Neutron Dependence Of Neutral Base Region Recombination, J. Bereisa, C. A. Goben

Electrical and Computer Engineering Faculty Research & Creative Works

A discrete, deterministic mathematical model has been developed for the bulk base region of graded base devices that accounts for both the effects of neutron-induced recombination and built-in electric field in the base region at low, intermediate, and moderate current/injection levels. Exact expressions are developed for the bulk base recombination current and the collector current as functions of neutron fluence. Exact expressions are derived for the base recombination term and the relative rates of neutron-induced base current increase and collector current decrease. These expressions involve exponential and hyperbolic functions and are well suited for numerical computations and theoretical analysis. Damage …

Baseband Agc In An Am-Fm Telemetry System, Richard S. Simpson, William H. Tranter

Electrical and Computer Engineering Faculty Research & Creative Works

The use of AGc loops at the input and output of the FM link in an AM-FM telemetry system allows the mean-square transmitter deviation to be maintained near maximum value, even though data may be nonstationary. However, errors result because of the inability of the receiver AGc loop to track perfectly gain variations in the transmitter loop. In this paper the general characteristics of AGc are discussed, and a theoretical analysis is performed to determine the time constant, steady-state error, and tracking error for a first-order loop. Also, tracking error for first order and second-order loops is investigated by simulation. …

Test 1050: John Deere 4320 Syncro Range, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 1054: Ford 2000 Gasoline 6-Speed (All Purpose), Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT

GENERAL CONDITIONS

East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers.

PREPARATION FOR PERFORMANCE RUNS

The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

Exact Solution For A Model Of Dislocation Pipe Diffusion, J. Mimkes, Manfred Wuttig

Materials Science and Engineering Faculty Research & Creative Works

The dislocations are treated as an ideal array of parallel pipes of radius and diffusivity Dp embedded in the bulk material of the diffusivity Db. The exact solution of this problem of diffusion along semi-infinite edge dislocations is presented for cubic, tetragonal, and hexagonal crystals. The solution makes it possible to evaluate the dislocation pipe radius a and the ratio of diffusivities from one experiment. It is applied to experimental data for self-diffusion in tellurium available in the literature. The results of the calculations are a dislocation pipe radius a=(1.5 0.5)x10-4 cm and an activation energy for the pipe diffusion …

Proceedings Of The Arkansas Academy Of Science - Volume 24 1970, Academy Editors

Journal of the Arkansas Academy of Science

No abstract provided.

Column Research Council: Proceedings 1970, Column Research Council

CCFSS Library (1939 - present)

The purposes of Column Research Council are to study and discuss problems related to the stability and strength of metal compression members; to organize research in this field; to disseminate information; and to formulate design rules for consideration by specification-writing bodies. The activities of the Council in 1970 are summarized in this report. A particular feature is the Proceedings of the 1970 Annual Technical Session. As in the past, the rosters of members of the Council and the By-Laws are also included. The support and technical contributions of the members and investigators are sincerely appreciated. Those individuals and organizations that …

Test 1046: International Farmall 826 Hydrostatic Diesel (Also International 826 Hydrostatic Diesel), Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT

GENERAL CONDITIONS

East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers.

PREPARATION FOR PERFORMANCE RUNS

The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

Test 1047: International Farmall 1026 Hydrostatic Diesel (Also International 1026 Hydrostatic Diesel), Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT

GENERAL CONDITIONS

East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers.

PREPARATION FOR PERFORMANCE RUNS

The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

Test 1048: International Farmall 1456 Diesel (Also International 1456 Diesel), Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT

GENERAL CONDITIONS

East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers.

PREPARATION FOR PERFORMANCE RUNS

The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

Test 1058: Case 770 Power Shift Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT

GENERAL CONDITIONS

East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers.

PREPARATION FOR PERFORMANCE RUNS

The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

Test 1061: Case 770 Manual Gasoline, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT

GENERAL CONDITIONS

East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers.

PREPARATION FOR PERFORMANCE RUNS

The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

Use Of The Turbulence Kinetic Energy Equation In Prediction Of Nonequilibrium Turbulent Boundary Layers, William Madison Byrne Jr.

Doctoral Dissertations

"A differential method is proposed for the prediction of a broad range of turbulent boundary layers of engineering and scientific interest. A digital computer program is presented which is applicable to boundary layers with positive, negative, and zero pressure gradient in the main-stream direction as well as boundary layers with suction, blowing or zero mass addition at the wall. The turbulence kinetic energy equation is solved simultaneously with the longitudinal momentum and continuity equations to provide an independent means for determining the effective viscosity which makes allowance for "history" effects in the flow. It is shown that the prediction method …

An Explicit Simulation Of Overland Flow, Glendon Taylor Stevens

Masters Theses

"Computer simulation of overland flow requires a mathematical model which converges to a true solution. This paper presents a method, based on measurable physical parameters, which insures convergence of a fixed grid explicit numerical solution. Analysis of a wide range of overland flow plane parameters has resulted in an equation of the form Δt = 0. 2 ΔX/S_o, for the time step increment. This equation provides values for Δt that will insure stability and convergence of the fixed grid explicit numerical method of solving the spatially varied unsteady flow equations. The effect of subarea shape on the rising …

Shear Strength Characteristics Of Crushed Glass, Fred Ray Browning

Masters Theses

"Drained and undrained triaxial compression tests were performed on two gradations of crushed glass in order to determine the compressibility and shear strength characteristics. Consolidation pressures varied from 10 to 100 psi. Volume changes during consolidation were discussed because of the dependency of shear strength behavior on the density condition at the end of consolidation. Stress-strain-volume change characteristics were observed in order to discuss the load-deformation and dilatancy relationships and the effects of varying density, gradation and consolidation pressure. Stress-strain properties were also determined for the undrained tests. The undrained tests were constant volume tests, thus having no dilatancy effects. …

A Mathematical Model For The Neutron Dependence Of Neutral Base Region Recombination, Jonas Bereisa Jr.

Masters Theses

"A discrete, deterministic, mathematical model is developed for the neutral bulk base region of graded base devices which accounts for both the effects of recombination and the built-in electric field in the bulk base region at low, intermediate, and moderate current/injection levels. This model is applied to a study of neutron radiation effects in double diffused silicon transistors. Exact expressions are developed for the injected emitter, base and collector currents, the base recombination term, and the ratio of base current increase to collector current decrease as functions of device geometry, impurity profile, and neutron fluence. Neutron-induced current gain degradation is …

A Study Of The Composite Action Of Light Gage Steel Deck And Concrete, Charles Sherman Bach Jr.

Masters Theses

"This thesis is on the investigation of corrugated light-gage steel sheets used as the tension reinforcement for concrete slabs. The steel sheets used had embossments placed at uniform intervals over the entire length of the sheets. The composite concrete and light-gage deck steel were tested to determine a method of design for this type of composite section from an economical, safe and practical standpoint. The investigation covered the flexural, shear and bond capacity of this type of composite section"--Abstract, page ii.

Comparison Of The Buckley-Leverett Technique With A Numerical Simulation Model Containing Heterogeneity And Capillary Pressure, Krishna Kumar Singh

Masters Theses

"A numerical model for a linear, two-phase fluid flow system has been developed with the capabilities of accounting for heterogeneity and capillarity. The model developed is general enough to analyze either water-oil or gas-oil systems. A hypothetical petroleum reservoir (containing only water and oil) under water flood was studied. The results for the homogeneous, no capillary pressure case were found to be similar to those obtained by the Buckley-Leverett technique. The study shows that the Buckley-Leverett is accurate even for a certain degree of heterogeneity. Also, capillarity does not substantially alter the results for the system studied. The results obtained …