Digital Commons Network^™

Sensitization Of Europium Oxide Nanoparticles Enhances Signal-To- Noise Over Autofluorescence With Time-Gated Luminescence Detection, Hunter Miller, Jessica Q. Wallace, Hui Li, Xing-Zhong Li, Ana De Bettencourt-Dias, Forrest Kievit

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Clinical translation of nanoparticle-based therapeutics has been limited, and a lack of preclinical delivery characterization is partly to blame, limiting our understanding of the mechanisms of failure. The improvement of the preclinical delivery assessment requires nanoparticles with higher detectability. This work focused on the exploration of several aromatic carboxylic ligands (terephthalic acid, quinaldic acid, and kynurenic acid) for the sensitization of europium oxide nanoparticles with a long emission lifetime to overcome cellular autofluorescence, a key confounder of detection in luminescence-based bioimaging. A facile one-pot synthesis and ligand exchange process generated and sensitized ultrasmall Eu₂O₃ cores. As reflected …

Development Of Rail Anchor Testing Through Literature Review Of Cwr Buckling Resistance Evaluation, Juan Rodriguez, Siang Zhou, Constantine Tarawneh, Alberto Sanchez, Teresa Salazar-Flores, S. Mustapha Rahmaninezhad, Hameem Gorabi

Mechanical Engineering Faculty Publications

Continuously welded rail (CWR) is among the most used railroad systems worldwide with great improvements compared to jointed tracks, including refined ride quality, increased fatigue life of track and rolling stock, and reduced maintenance costs. Rail buckling is one of the key remaining issues for CWRs to further reduce safety hazards and infrastructure deterioration, and save required track retrofit material and efforts. CWR buckling is induced by combined longitudinal, lateral, and torsional forces on the track that are caused by the synergy of rail components, the loading from moving trains, the interaction between track and substructure, and the effect of …

Mitigating Uncertainty: Analyzing The Role Of Risk Management In The Construction Industry, Mike Nwafor

Harrisburg University Dissertations and Theses

The construction industry, inherently dynamic and complex, faces a myriad of uncertainties that can significantly impact project outcomes. In this context, effective risk management emerges as a critical component in ensuring project success and sustainability. This abstract explores the role of risk management in the construction industry, highlighting its multifaceted impact on project timelines, costs, and overall quality. Risk management in construction includes detecting, assessing, and managing possible hazards and opportunities throughout the project's life cycle. It includes a proactive approach to anticipating, analyzing, and responding to uncertainties driven by factors such as design modifications, material shortages, labor concerns, weather …

Ai-Enabled Vibration Sensing System For Early Detection Of Trains At Active Highway-Rail Grade Crossings, Mohsen Amjadian, Md. Masnun Rahman, Constantine Tarawneh, Valik Villarreal, Dylan Rocha

Civil Engineering Faculty Publications

Highway-rail grade crossings (HRGCs) play an essential role in ensuring the secure traversal of road users across railway tracks. However, despite their significance, they present safety challenges, particularly when trains go undetected, heightening the risk of potential collisions between the road user and train. This paper aims to explore the viability of employing vibration sensors for detection and characterization of an approaching train’s speed at HRGCs. The methodology involves analyzing rail vibrations and developing a time series predictive machine learning (ML) model. To accomplish this, a Finite Element (FE) model of a ballasted track railway is created in SAP2000, consisting …

Feature Extraction From Vibration Signature Required From Railroad Bearing Onboard Condition Monitoring Sensor Modules, Kevin Quaye, Ping Xu, Dimah Dera, Heinrich D. Foltz, Constantine Tarawneh, Alberto Diaz

Mechanical Engineering Faculty Publications

From 2013 to 2022, 1671 derailments have been reported by the Federal Railroad Administration (FRA), 8.2% of which were due to journal bearing defects. The University Transportation Center for Railway Safety (UTCRS) designed an onboard monitoring system that tracks vibration waveforms over time to assess bearing health through three analysis levels. However, the speed of the bearing, a fundamental parameter for these analyses, is often acquired from Global Positioning System (GPS) data, which is typically not available at the sensor location. To solve this issue, this paper proposes to employ Machine Learning (ML) algorithms to extract the speed and other …

Technologies For Wearable Seizure Detection: A Systematic Review, Rhema Losli

University Honors Theses

Knowing when a seizure occurred is helpful because this information can be used to evaluate the effectiveness of seizure interventions and possibly alert caregivers to emergency situations. The current practice for recording seizures outside of a hospital and without sensors is through keeping a self-reported seizure diary. This practice may be unreliable if the diary is not updated or the person having the seizure does not realize it is happening. Wearable seizure detectors aim to solve this problem by reliably recording when a seizure happened and either sending out an alert or storing the data for later analysis. In this …

Preservation Of Biomass In Underground Capsules Using An Open-Source Wireless Water Activity Sensor System: Capstone Review, Joshua Varughese

University Honors Theses

This paper highlights the progression of a two-term senior capstone project in the ECE department at Portland State University. Sponsored by Dr. David Burnett from PSU's WEST Lab, the project aims to produce an affordable wireless monitoring system for water activity. The example scenario focuses on carbon sequestration where wood biomass is buried underground in enclosed capsules. For optimal sequestration, microorganisms capable of decaying the wood and releasing carbon back into the environment must be eliminated. Water activity, a key metric for measuring microbial activity, must be below 0.61 to prevent microbial survival. The system this project was designed for …

Experimental Investigation Of Lateral Load Effects On Railway Tapered Roller Bearing Performance, Abel David Sanchez Trinidad, Constantine Tarawneh, Diego Aguila, Arturo A. Fuentes, Santanna Guiterrez, Curtis Pena, Daniel Reyna

Mechanical Engineering Faculty Publications

In the quest to maintain the reliability and safety of railway systems, vibration signatures emerge as a crucial diagnostic tool for identifying and tracking the progression of railway bearing health. It is important to note that, in the case of spall deterioration, temperature variations may only become noticeable once spalling has spread extensively across the raceway. Hence, a comprehensive understanding of the effects of lateral loading under various train speeds at empty and full railcar loads is important. Surprisingly, limited research has been carried out or made publicly available on the effects of lateral loading on the performance of railroad …

Modified Method For Assessing The Required Expenditures And Estimated Time Of Hard Coal Mine Liquidation, Andrzej Chmiela, Małgorzata Wysocka, Adam Smoliński

Journal of Sustainable Mining

The restructuring of hard coal mining requires significant budgetary expenditures. A comprehensive scientific approach may facilitate the rationalisation and minimisation of mine closure costs. This study proposes a method for the preliminary estimation of the costs and time required for the potential liquidation of a hard coal mine. In addition to a literature review, a statistical analysis and a case study, personal interviews were conducted with individuals with direct management over the restructuring, reclamation and liquidation processes pertaining to mines undergoing closure.

The assessment method is based on an analysis of the mine liquidation costs, divided into successive years of …

Distant Horizon: Exploring Human-Ai Interaction Through Video Games, Gabe Labadie, Dalia Suszko, Max White

Computer Science and Engineering Senior Theses

As the field of Artificial Intelligence (AI) continues to grow and become more and more integrated into our everyday lives, it has begun to raise ethical concerns surrounding authority, autonomy, and responsibility. Researchers and consumers alike have begun to wonder how much trust we are willing to place in a non-human decision maker, especially if an Artificial General Intelligence (AGI) capable of surpassing human cognitive capabilities is ever developed. If we are willing to let an AI write essays for us, are we willing to let it manage a business? A government agency? What about a nuclear reactor?

Our project …

General Purpose Tuning Data Visualization, Chris Augustine, Francisco Salinas, Aakash Shetty

Computer Science and Engineering Senior Theses

This project centers on the visualization of High-Performance Computing (HPC) data obtained from the GPTune website. GPTune serves as a valuable resource for HPC experiments, providing a wealth of performance data from tuning studies and optimization tasks. Our objective is to develop an advanced data visualization framework tailored to GPTune’s datasets. Utilizing state-of-the-art visualization techniques, we aim to create an interactive platform that allows users to explore, analyze, and derive insights from the diverse tuning experiments conducted on HPC systems. The visualization tool will facilitate the identification of optimal configurations, performance trends, and patterns within GPTune data, empowering researchers and …

Applied Auto-Tuning On Lora Hyperparameters, Darren Inouye, Lucas Lindo, Robin Lee, Edmund Allen

Computer Science and Engineering Senior Theses

This senior design project explores the application of Bayesian optimization-based auto-tuning techniques on the low-rank adaptation (LoRA) fine-tuning of large language models (LLMs), demonstrating how fine-tuning methods can reduce training times and costs, albeit with a slight trade-off in accuracy. However, little is known about the optimal hyperparameters on LoRA and its variants for those methods. This project addresses this lack of knowledge by analyzing data gathered from auto-tuning LoRA hyperparameters to determine the most optimal parameter configurations for a model’s accuracy and training efficiency.

The team has implemented a pipeline utilizing many different technologies. The main technology driving the …

9-Axis Motion Tracking To Aid Therapeutic Recovery Via Visualization, Analysis And Progress Monitoring, Megan Wiser, Liam A'Hearn, Christopher Tamayo, Liam Kelly

Computer Science and Engineering Senior Theses

This paper presents an innovative approach to enhance at-home physical therapy exercises through the development of a wearable motion tracking system. The proposed system utilizes motion tracking bands worn by patients during exercises, specifically focusing on a squat jump for the initial phase of the project. The bands, placed around the ankle and knee, monitor the alignment of the user's motion and transmit data via Bluetooth Low Energy (BLE) to a dedicated webpage. This webpage integrates real-time data analysis, offering immediate feedback to users, enabling them to monitor their form and track progress over time. The collected data is stored …

Federated Learning Based Autoencoder Ensemble System For Malware Detection On Internet Of Things Devices, Steven Edward Arroyo

Theses and Dissertations

New technologies are being introduced at a rate faster than ever before and smaller in size. Due to the size of these devices, security is often difficult to implement. The existing solution is a firewall-segmented “IoT Network” that only limits the effect of these infected devices on other parts of the network. We propose a lightweight unsupervised hybrid-cloud ensemble anomaly detection system for malware detection. We perform transfer learning using a generalized model trained on multiple IoT device sources to learn network traffic on new devices with minimal computational resources. We further extend our proposed system to utilize federated learning …

Assessment For Sustainable Transportation Systems In Egypt, Hagar Mohamed Fares

Theses and Dissertations

The assessment of a sustainable transportation system poses a significant challenge for local governments, as it dramatically influences the promotion of environmentally friendly modes of transportation with the objective of safeguarding the public's welfare and health in their daily activities. The integration of such assessment should be implemented from the initial stages of system planning to its operational and maintenance phases, particularly in light of the increasing number of urban development activities nationwide. In order to facilitate decision-making processes, it is imperative to establish an efficient rating system that incorporates cultural and social constraints and comprehensively considers the three dimensions …

A Comprehensive Study On The Impact Of Human Hair Fiber And Millet Husk Ash On Concrete Properties: Response Surface Modeling And Optimization, Naraindas Bheel, Muhammad Alamgeer Shams, Samiullah Sohu, Abdul Salam Buller, Taoufik Najeh, Fouad Ismail Ismail, Omrane Benjeddou

Department of Civil and Environmental Engineering: Faculty Publications

Revolutionizing construction, the concrete blend seamlessly integrates human hair (HH) fibers and millet husk ash (MHA) as a sustainable alternative. By repurposing human hair for enhanced tensile strength and utilizing millet husk ash to replace sand, these materials not only reduce waste but also create a durable, eco-friendly solution. This groundbreaking methodology not only adheres to established structural criteria but also advances the concepts of the circular economy, representing a significant advancement towards environmentally sustainable and resilient building practices. The main purpose of the research is to investigate the fresh and mechanical characteristics of concrete blended with 10–40% MHA as …

An Efficient Method For Recognition Of Human-In-Motion Action Based On Foot-Lift Features, Khin Cho Tuna, Hla Myo Tunb

ASEAN Journal on Science and Technology for Development

In the age of Industry 4.0, recognition of human moving actions becomes an essential element in smart surveillance systems at public places. The requirement of a large number of frames, view dependency and the requirement of big database are still challenging issues for human action recognition in real-time applications. This study proposes an efficient method for basic moving actions, “Walking” and “Running”, based on foot-lift features aiming at the recognition of ongoing moving action by reducing the number of frames required. The plane of moving path and foot-lift are estimated during the action by means of BLOB analysis. The performance …

Hiv3: An Efficient Beehive Monitoring System, Jack Ursillo, Aneal Kuverji, Connor Merhab, Anshuman Sahu

Computer Science and Engineering Senior Theses

Beehive monitoring plays a major role in ensuring the health of beehives by checking for overpopulation or underpopulation within a hive. Beehive monitoring provides beekeepers with the opportunity to take action and save the hive before the problem becomes irreversible. Most solutions are too expensive for everyday beekeepers and lack elements of sustainability, making it impractical for small scale beekeepers. In this thesis, we propose a solution to this problem, demonstrating its sustainability and user-friendliness, which enables us to effectively reach a larger consumer market. We support these claims through the use of sustainable systems such as using a solar …

Finding The Shortest Path Using Dijkstra’S Algorithm, Orit D. Gruber, Deborah Sturm

Open Educational Resources

This lab experiment explores an algorithm which is used to find the shortest path between two or more locations. After completing the lab, you will be able to answer the following questions in the final lab report:

1. What is an Algorithm?
2. What is a Graph ?
3. What is the purpose and operation of Dijkstra’s Algorithm ?

Transforming Orthopedic Surgery: Autonomous Image-Guided Techniques For Femur Fracture Robotic Surgery, Marzieh Sadat Saeedi-Hosseiny

Theses and Dissertations

Long-bone fractures, particularly femur fractures, are prevalent and necessitate surgical intervention due to traumatic forces. Manual reduction procedures pose challenges, including excessive traction forces and reliance on limited X-ray imaging, resulting in malalignment-related complications and repeated surgeries. Current methods for femur fracture reduction are prone to inaccuracies, prolonged surgical times, and postoperative complications. This research introduces image-guided methods to automate a surgical robotic system, Robossis, to enhance femur alignment accuracy, reduce procedure times, and improve patient outcomes. To address these challenges, a marker-based approach utilizing a few X-ray images is developed to detect the spatial relative position of the femur …

Design And Fabrication Of Passive Microfluidic Devices For Enhancing Membrane-Based Biosensors, Tanner N. Wells

Theses and Dissertations

Microfluidic devices and systems have demonstrated wide applicability in sample processing and analysis. The ability to integrate sample processing and analysis into a single platform is a key benefit of microfluidic technologies. This dissertation describes the design and fabrication two types of microfluidic devices developed to enhance membrane-based biosensors. First is a device for collecting particles into a highly confined region, locally enhancing their concentration. Second is a device for size-based particle separation capable of separating differently sized particles into separate streams. Both types of devices are fabricated with a thin top layer, providing a platform for synthetic membrane-based technologies. …

The Design, Prototyping, And Validation Of A New Wearable Sensor System For Monitoring Lumbar Spinal Motion In Daily Activities, Brianna Bischoff

Theses and Dissertations

Lower back pain is a widespread problem affecting millions worldwide, because understanding its development and effective treatment remains challenging. Current treatment success is often evaluated using patient-reported outcomes, which tend to be qualitative and subjective in nature, making objective success measurement difficult. Wearable sensors can provide quantitative measurements, thereby helping physicians improve care for countless individuals around the world. These sensors also have the potential to provide longitudinal data on daily motion patterns, aiding in monitoring the progress of treatment plans for lower back pain. In this work it was hypothesized that a new wearable sensor garment that makes use …

Ultra Low-Power, High-Performance Presence Detection System, Dante Bajarias, Cristian Medal, Jashan Kaeley

Computer Science and Engineering Senior Theses

The proliferation of Internet of Things (IoT) devices emphasizes a greater connection between humans and smart technology. From computer peripherals, personal electronics, and domestic appliances to building access management, healthcare, and security systems, modern applications are generating as much data or more than they are receiving from other sources. Human presence is a type of data that is becoming a compelling requirement for a plethora of today’s applications that must ensure seamless interactions of users with the systems and their associated services. The ultra low-power, high performance presence detection system is an accelerometer-based system capable of person detection, people counting, …

Edge-Connected Microcontroller Security, Divya Syal, Gavin Ryder, Neena Ekanathan

Computer Science and Engineering Senior Theses

With a wide range of applications and the rise of cyber attacks, securing microcontrollers has become imperative; however, ensuring microcontroller performance is also crucial given how interconnected today’s systems are. This project examines the security and performance of next-generation microcontroller units leveraging new security solutions for IoT edge applications. By benchmarking these MCUs against key performance metrics, their viability will be assessed to facilitate the widespread adoption of this latest firmware.

Our research focuses on profiling the power consumption and performance of the new STM32H573 and the integrated Secure Manager, a new technology from ST Microelectronics that allows for privileged …

Autonomous Microgrid System, Xavier Kuehn, Brian Xiong

Computer Science and Engineering Senior Theses

Microgrids have made a revolutionary change in the realm of energy distribution due to the features that they offer, including localized, resilient, and sustainable energy solutions. Operating renewable resources in a microgrid while maintaining generation-load balance and acceptable voltage-frequency limits has been an open research problem. This thesis presents smart python agents for microgrid systems to automate the operations and control of microgrid renewable resources in an effort to provide resilient solutions to the intermittence issues that could potentially arise within the microgrid energy system. The smart agents operate the microgrids by not only integrating the use of renewable energy …

Comparing Life-Cycle Dynamics Of Li-Ion Batteries (Libs) Clustered By Operating Conditions With Sindy, Kristen L. Hallas, Md Shahriar Forhad, Tamer Oraby, Benjamin Peters, Jianzhi Li

Manufacturing & Industrial Engineering Faculty Publications

Lithium-ion batteries (LIBs) play a big part in the vision of a net-zero emission economy, yet it is commonly reported that only a small percentage of LIBs are recycled worldwide. An outstanding barrier to making recycling LIBs economical throughout the supply chain pertains to the uncertainty surrounding their remaining useful life (RUL). How do operating conditions impact initial useful life of the battery? We applied sparse identification of nonlinear dynamics method (SINDy) to understand the life-cycle dynamics of LIBs with respect to sensor data observed for current, voltage, internal resistance and temperature. A dataset of 124 commercial lithium iron phosphate/graphite …

Remote Vibration Based Monitoring Of Bridge Scour, Alan Kazemian

Dissertations

The gradual erosion of the sediment around a bridge foundation is called Scour. This erosion is caused by water flow and increases during times of high-water flow such as flooding. The scour leaves the bridges structurally unsound over time and jeopardizes the safety of the structure. Approximately 60 percent of bridge failures in the United States are caused by scour. A variety of types of devices have been used to detect scour. Most of these devices only observe the scour and not the structural integrity of the bridge. The typical approach has relied on visual inspections of the bridges after …

Preclinical Examination Of A Nerve Specific Fluorophore Using Ex Vivo Human Tissues, Logan Michael Bateman

Dartmouth College Master’s Theses

Fluorescence-guided surgery (FGS) is a nascent field which seeks to improve patient safety and surgical outcomes using fluorescent agents known as fluorophores. Fluorophores are molecules which upon excitation with a specific wavelength of light emit a photon of a specific wavelength which can be detected using a modified camera system. Creation and translation of a fluorophore for clinical use is a costly, laborious, and time intensive process. Only a handful of fluorophores have received FDA approval and they required multiple years of tightly regulated clinical trials. Prior to these first-in-human studies these agents are subject to a litany of preclinical …

Quantifying Variation Across 16s Rrna Gene Sequencing Runs In Human Microbiome Studies, Andrew J. Hoisington, Christopher E. Stamper, Joseph C. Ellis, Christopher A. Lowry, Lisa A. Brenner

Faculty Publications

Recent microbiome research has incorporated a higher number of samples through more participants in a study, longitudinal studies, and metanalysis between studies. Physical limitations in a sequencing machine can result in samples spread across sequencing runs. Here we present the results of sequencing nearly 1000 16S rRNA gene sequences in fecal (stabilized and swab) and oral (swab) samples from multiple human microbiome studies and positive controls that were conducted with identical standard operating procedures. Sequencing was performed in the same center across 18 different runs. The simplified mock community showed limitations in accuracy, while precision (e.g., technical variation) was robust …

E-Scooter Black Box, Soham Phadke, Suvass Ravala, Joshua Jerome, Raghav Batra, Mubashir Hussain

Computer Science and Engineering Senior Theses

The burgeoning market for shared e-scooters is significantly hampered by the short lifespan of commercial e-scooters, which currently average just three months due to rough handling by users. To address this challenge, our project aims to extend the lifespan of shared e-scooters through an innovative onboard solution that discourages detrimental riding behaviors.

Our solution integrates a portable sensor hub from STMicroelectronics to capture ride data, which is then processed and sent via a user’s iOS app to a Google Firebase backend. A machine learning model running in the cloud analyzes the data to extract valuable metrics. These metrics are displayed …