Digital Commons Network^™

Melt Hydroperoxidation Polypropylene With Potential Application In Pollution Control, Zeena Cherian

Theses

The primary objective of this study is to introduce tertiary hydroperoxide functional groups into polypropylene (PP) melt by injecting air. This was done first by mixing additive free polypropylene powder with air in a batch mixer. The influence of air flow rate, temperature, mixing time and rotor RPM on the concentration of hydroperoxide groups were studied. Iodometric analysis and fourier transform infrared spectroscopic analysis were the techniques used to detect and quantify the concentration of hydroperoxide groups. In the second phase of the study, hydroperoxide groups were introduced in polypropylene through reactive processing in a single screw extruder. It was …

Removal Of Vocs From Superfactant-Flushed Wastewater By Membrane Based Modified Pervaporation Process, Anirban Das

Theses

An aqueous solution of a volatile organic compound (VOC) e.g. trichloroethylene (TCE) is passed through the bores of hydrophobic microporous polypropylene hollow fibers having a plasma polymerized silicone coating on the fiber outside diameter; a vacuum is maintained on the shell side of the fiber to remove the VOC and recover it by condensation. Process performance has been obtained over a range of feed flow rates, concentrations of VOC and the surfactant (sodium dodecyl sulfate (SDS)). In solutions without surfactant or low surfactant concentrations, the pores are not wetted and remain gas-filled. The VOC is stripped from the solution into …

Voc Removal From Nitrogen By A Membrane-Based Combined Absorption-Stripping Process, Boya Xia

Theses

A regenerative membrane-based absorption process has been extensively studied to remove volatile organic compounds (VOCs) from air/N₂ using silicone oil as absorbent. The absorbent liquid is regenerated by applying vacuum in a membrane-based stripper. In this process, there are no flooding, loading and entrainment, which limit the gas/liquid flow rate in the traditional absorption process. In the present study, attention has been focused on the removal of volatile component(s) from binary gas mixtures such as methanol-N₂, and toluene-N₂, and from a model multicomponent mixture of gasoline vapor constituents and nitrogen. The process performance was tested …

Introduction To Pollution Prevention Concepts In Freshman Chemistry Through Simulations And Hypermidia, Aniraban Bhaumik

Theses

As citizens of the 20th century, a key issue we all are aware of is degradation of the environment. In the interest of teaching the environmental issues to freshmen engineers, this study develops a computer aided learning/teaching (CAL/T) tool.

This CAL/T tool consists of Internet based multimedia courseware and intelligent simulations. The courseware assembles the fundamentals of chemistry associated with current environmental issues such as air pollution, stratospheric ozone layer depletion and environmentally sensitive or 'clean' manufacturing. The courseware targets early and comprehensive understanding of pollution prevention concepts with a focus on environmentally friendly manufacturing. The courseware includes: on-line text, …

Method For Reducing The Generation Of Wear Particulates From An Implant, David A. Pienkowski, Kwon-Yong Lee

Biomedical Engineering Faculty Patents

A method is provided for reducing the amount of wear particulates generated by a total joint orthopaedic implant. The implant consists of two matched articulating components wherein at least one of the components is made of polymer or other material with similar physical properties. The method includes the steps of placing the total joint orthopaedic implant in a fluid bath and articulating the implant in the fluid bath for at least 1,000 cycles. The articulation may be performed in three stages. In the first, the implant is articulated under a load of substantially 0.1-500 Newtons with sliding speeds of substantially …

Acuta Enews January 1998, Vol.27, No. 1

ACUTA Newsletters

In This Issue

School NOT Required to Contribute to USF

What's Your Biggest Challenge for 1998?

Board Report

Spotlight

Analyzing Cable Needs and Planning for the Future at CMU

Tech Partners at Cal State

Directories Are Here!

DC at a Glance

Position Available

Welcome New Members

Current Concepts Review - Corrosion Of Metal Orthopaedic Implants, Joshua J. Jacobs, Jeremy L. Gilbert, Robert M. Urban

Biomedical and Chemical Engineering - All Scholarship

No abstract provided.

Tissue Engineering: At The Interface Between Engineering, Biology And Medicine, Brenda Ogle, Priti Gairola, Jodi Balik, Daniel L. Mooradian

Journal of the Minnesota Academy of Science

No abstract provided.

Driving Simulators: Are They Valid Test Environments For Its Development?, Robert A. Glaser

Link Foundation Modeling, Simulation and Training Fellowship Reports

Driving simulators are increasingly being used to test the Intelligent Transportation Systems (ITS) that interface_ with the driver in the vehicle. Examples of such technologies include autonomous, on-board-sensors (Huguenin, 1993) which potentially can prevent many of the rear-end crashes that lead to fatalities or serious injuries (Knipling, Mironer, Hendricks, Tijerin, Everson, Allen and Wilson, 1993). A study of the simulator image-factors which affect the detection of rear-end-collisions and, more generally, of motion is described below. The study was undertaken on the University of Massachusetts driving simulator located at the Amherst campus.

Santa Clara Magazine, Volume 39 Number 4, Winter 1998, Santa Clara University

Santa Clara Magazine

10 - INSIDE OUT Francisco Jimenez, chairman of the University's Modern Languages and Literatures Department, recalls his grade-school days and immigrant family.

14 - FROM HALLOWED TO HIP Connie Hinckley, East Bay writer, examines the media's many-faceted portrayals of the priesthood, especially the controversial Father Ray of Nothing Sacred.

20 - SANTA CLARA'S ADOBE LEGACY Susan Vogel, San Francisco author and publisher, traces the history of the Adobe Lodge and describes its many roles in the life of the University.

26 - UNCOVERING THE REGION'S RICH PAST As the University clears land for new buildings, SCU archeologists and Native American …

Induction Of Oxidative Stress In Brain Tissues Of Mice After Subchronic Exposure To 2,3,7,8-Tetrachlorodibenzo-P-Dioxin, Ezdihar A. Hassoun, Shawn C. Wilt, Michael J. Devito, Angelique Van Birgelen, Naser Z. Alsharif, Linda S. Bimbaum, Sidney J. Stoh

United States Environmental Protection Agency: Publications

The ability of single doses of 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) to induce oxidative stress in hepatic and some extrahepatic tissues of animals is well documented. However, no previous study has examined the ability of TCDD to induce oxidative stress and tissue damage in brain in vivo. In this study the ability of TCDD to induce oxidative stress in brain tissues of mice was studied after subchronic exposures. Groups of female B6C3F1 mice were treated orally with TCDD (0, 0.45, 1.5, 15, and 150 ng/kg/day) for 13 weeks, 5 days/week. The animals were euthanized 3 days after the last treatment and brain tissues …

Building Cavities Used As Ducts: Air Leakage Characteristics And Impacts In Light Commercial Buildings, Florida Solar Energy Center, James Cummings

FSEC Energy Research Center®

Field testing in 70 small commercial buildings in central Florida identified that building cavities were used as part of the air distribution system in 33 buildings. The various building cavity types (# of buildings in parentheses) are: enclosed air handler support platforms (10), mechanical closets (8), mechanical rooms (6), ceiling spaces (7), wall cavities (6), chases (1), and "other" building cavities (2). Testing found that these building cavities are considerably more leaky than standard ducts and plenums because they are generally not built to the same airtightness standard as ducts. Actual air leakage is a function not only of duct …

Networking 8-Bit Embedded Controllers, Using The Controller Area Network Method, Brett Wilkinson

Theses : Honours

The initial aim of this project was to create an ethernet (IEEE 802.3) Communications System. The system was to connect Embedded controllers to facilitate the operation of a real time operation. After extensive investigation and scheduled meetings with industry, it became apparent that a superior communication system for this type of task lay in the Controller Area Network (CAN) standard. Communications Networks are extremely susceptible to volatile surroundings. A vital controller network necessitates that its communication network be invulnerable to high noise levels. It is also imperative that critical messages from one controller reach their destination on time. CAN was …

Water Systems For Controlled Grazing, Larry W. Turner

Agricultural Engineering Extension Updates

Intensive controlled or rotational grazing can be an important tool for beef and dairy producers in Kentucky. A key component for success with this type of operation is the availability of adequate drinking water for livestock on pasture.

Quantities, flow rates and location of water for rotational grazing will be considered in this fact sheet. Systems supplying water under pressure through hose or pipe to a tank or water bowl will be discussed in detail.

Virtual Reality Modelling Of A Cnc Machine, Damian O'Sullivan

Theses

The increasing importance of training and upgrading skills has led to the use of new interactive technologies in the development of more effective training tools. Previous techniques for training Computer Numerical Control (CNC) machine operators, while excellent for their time, varied from brief inexpensive tutorials to expensive on the job training. A CNC machine uses a computer to perform the functions of the machine using a part program stored in the memory of the computer. This thesis describes a Virtual Reality (VR) model of a CNC milling machine, implemented within a VR environment representing a CNC workshop. Its development and …

Mathematics, Modeling, And Modular Curriculum In Engineering Retraining Programs, Massoud Moussavi

Educational Studies Dissertations

The present study is an attempt to probe, explore, and provide an appropriate educational method for engineering retraining programs. The central concerns and implications of this study revolve around: who engineers are, how they learn, why they need to learn, and what they have to learn. The existing retraining programs also will be evaluated in order to develop a suitable retraining program for engineers.

Acid Characteristics Of Dissolved Organic Matter In Wastewater, Jianmin Wang, C. P. Huang, Herbert E. Allen, Luis R. Takiyama, Ira Poesponegoro, Haryanto Poesponegoro, Dan Pirestani

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The presence of dissolved organic matter (DOM) in a wastewater treatment system can significantly affect the uptake of heavy metals by sludge particulates. The characteristics of DOM, its concentration, and the solution pH are important parameters governing the heavy metals uptake reaction. The characteristics of DOM of various wastewater and sludge (primary, secondary, and tertiary) samples collected from four municipal wastewater treatment plants were investigated. Results showed that the dissolution of DOM from sludge is significantly affected by pH and suspended solids concentration. Results also showed that DOM contains two discrete acid groups that are available for metals complexation. The …

Effects Of Temperature, Water Hardness, And Recirculation On Copper Corrosion, Brian R. Weiss

Electronic Theses and Dissertations

In previous work, the effects of water quality have been shown to influence the formation of scale from copper corrosion. A general understanding of the effects of water quality on copper corrosion have been difficult to obtain because of complex interactions of water quality variables on copper corrosion in different water supply systems. The objective of this study was to examine the effects of temperature and water hardness on copper corrosion occurring in a household water supply system. The effects of recirculation were also studied in concurrence with the above water quality parameters. Electrochemical corrosion testing and corrosion by -product …

Gaseous Cah Removal By Biofiltration In Presence And Absence Of A Nonionic Surfactant, J. O. Kim, Purush K. Terkonda, S. D. Lee

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The objectives of this study were to investigate the biodegradation of gaseous trichloroethylene (TCE) and tetrachloroethylene (PCE) in an activated carbon biofilter inoculated with phenol-oxidizing microorganisms and to study the effect of surfactant concentration below its critical micelle concentration (CMC) on the removal efficiency of TCE or PCE. For the enhanced biofiltration, a biodegradable nonionic surfactant was added to biofilters. The investigation was conducted using two specially built stainless steel biofilters, one for TCE and the other for PCE. The removal efficiency of gaseous TCE was 100% at a residence time of 7 min and its average inlet concentration of …

Euroconstruction Report 1, Louis Gunnigan, Trevor Orr

Reports

This report was prepared on behalf of the Construction Industry Federation as Ireland’s initial contribution to the Leonardo da Vinci Project: Euroconstruction.

The report is divided into 3 sections.

Section 1 concentrates on the recent and likely future changes in the structure of the Irish construction market and the impact of these changes on project management and project financing. The recent growth of the industry is documented and predictions for the future of the industry in Ireland are summarised. The conclusions reached show that an increased involvement in the financing of public projects is required from the private sector if …

Imaging Electrical Current Density Using Nuclear Magnetic Resonance, B. Murat Eyüpoğlu, Ravinder Reddy, John S. Leigh

Turkish Journal of Electrical Engineering and Computer Sciences

In this study, images of nonuniform and uniform electric current density in conductor phantoms, which contain magnetic resonance active nuclei, are produced using Magnetic Resonance Imaging (MRI). A standard spin echo pulse sequence is used, with the addition of a bipolar current pulse. The flux density parallel to the main magnetic field, generated by the current pulse, is encoded in the phase of the complex MR image. The spatial distribution of magnetic flux density is extracted from the phase image. Current density is calculated using the magnetic flux density. This fairly recent technique is known as Magnetic Resonance Current Density …

Fdtd Evaluation Of The Sar Distribution In A Human Head Near A Mobile Cellular Phone, Selçuk Paker, Levent Sevgi̇

Turkish Journal of Electrical Engineering and Computer Sciences

In this study, Finite-Difference Time-Domain (FDTD) method is used to calculate the Specific Absorbtion Rate (SAR; defined as the power absorbed by unit mass of the tissue) distribution in a human head near a hand-held cellular phone. A three dimensional FDTD algorithm is built in cartesian coordinates. A discrete human head model, derived from a Nuclear Magnetic Resonance (NMR) image by semi-automatic algorithm, is located within FDTD volume together with a discrete hand-held receiver model. FDTD simulations are carried out for both european GSM (operating at 900MHz) and DECT (operating at 1.8GHz) systems with a quarter-wavelength antenna, mounted on top …

Master Of Science Degree Programs 1998, Nova Southeastern University

College of Engineering and Computing Course Catalogs

No abstract provided.

An Evaluation Of The Aws Entry Level Welder Training Program, John R. Rice

Dissertations and Theses @ UNI

The purpose of this study was to evaluate the effectiveness of a training program for Entry Level Welders and to provide this information to the American Welding Society (AWS), industry, and educators. The problem of this study was to evaluate the AWS Entry Level Welder Training Program (ELWTP) by obtaining the opinions of faculty members who taught the program and welders who had completed the program.

Two groups comprised the research population for this study. The first group consisted of faculty members who were actually involved in teaching the course at institutions accredited by the AWS to offer the curriculum. …

University Of Texas At Tyler Freshman Catalog, 1998-1999, University Of Texas At Tyler

Catalogs

Archives Space instance: https://archivesspace.uttyler.edu/repositories/2/archival_objects/22363

Biological Fixed-Film Systems, Mark W. Fitch, Natalie Pearson, Gene Richards, Joel Gerard Burken

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

No abstract provided.

Natural Treatment And On-Site Processes, Kevin D. White, Joel Gerard Burken

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

No abstract provided.

My Methanol Motorcycle, Art Maccarley

Electrical Engineering

.

Well Characteristics Influencing Microscopic Particulate Analysis Risk Index, Robert Christopher Sharek

Retrospective Theses and Dissertations

Cryptosporidium parvum is a common surface water contaminant that can cause illness in human beings. The presence of this etiological agent in groundwater identifies the groundwater as under the direct influence (GWUDI) of surface water. Currently the determination of GWUDI water sources requires an expensive, labor-intensive laboratory procedure called the Microscopic Particulate Analysis (MPA). The results of the MPA provide a risk index that rates the degree of surface water contamination. The objective of this study is to identify other methods of identifying GWUDI of surface waters, such as well characteristics and hydrogeologic factors which may contribute to higher MPA …

Dsp Implementation Of A Quadrature Phase Shift Keying Transmitter, Andrew Phoon

Theses : Honours

The aim of this project is to develop a DSP implementation of a QPSK transmitter. This transmitter is to process digital signals in real-time and modulate it with sinusoidal and cosinusoidal signals to produce the required QPSK waveform. This thesis is mainly divided into three sections. The first section deals with the theory of modulation. Phase shift keying, in particular binary phase shift keying, is explained in some detail, with references to the generation of quadrature phase shift keying. In the second section, a brief overview of the SIMULINK package from MATLAB is given, as simulations of ideal and nonideal …