Digital Commons Network^™

How To Define A Confidence Set For Functions: A New Justification Of The Area Method, Vladik Kreinovich, Gang Xiang, Michael Oberguggenberger

Departmental Technical Reports (CS)

Due to uncertainty, in many problems, we only know the probability of different values. In such situations, we need to make decisions based on these probabilities: e.g., we must tell the user which values are possible and which are not. Often -- e.g., for a normal distribution -- the probability density is everywhere positive, so, theoretically, all real values are possible. In practice, it is usually safe to assume that values whose probability is very small are not possible. For a single variable, this idea is described by a confidence interval C, the interval for which the probability to be …

Simulation Of Cal Poly Super System Simulink Model Using Insolation Variation, Jacob Kory

Electrical Engineering

This senior project focuses on simulation of the Cal Poly SuPER system using an insolation model. First, local and historical weather data is examined to determine the range of limits that the model will utilize. Then, the insolation model is constructed to fit into the existing SuPER model. The overall system is tested under a variety of insolation values to determine system performance of motor and static loads. Based on these simulations, several factors of the current model are discovered that limit the power consumption profile under off-peak load conditions. Finally, recommendations on improvements to the model are discussed

Mixing Digital And Analog Audio Signals, David Robison

Electrical Engineering

I have been playing the drums for thirteen years. I started out on an electric drum set and then progressed to an acoustic set. I have always wondered what it would sound like to combine the two types of sounds and this senior project dissected that interest to its raw form. Delving into the problems and solutions of combining digital and analog audio signals intrigued me and thus, became my senior project. The design process included research into the analog and digital realms, computer simulations, and actual implementation successes and failures.

The signal path begins at the bass drum where …

Traversing Probe Assembly, Josh Bugni, Andrew Sofranko

Mechanical Engineering

No abstract provided.

Max Flow Spill Code Placement Algorithm Implemented In Gcc 4.4.3, Stephen Robert Beard

Computer Engineering

The placement of spill code plays an important role in the register allocator of an optimizing compiler. Many computer architectures possess a register linkage convention that dictates which registers are preserved across function calls and which are not. This project addresses the problem of optimizing spill code that is associated with register linkage conventions.

This algorithm was created by Dr. Chris Lupo and is described in the paper Beyond Register Allocation: a Novel Algorithm for Spill-Code Placement. The algorithm was implemented for GCC 2.5.7 for a PA-RISC architecture [4]. The work in this project will involve porting the existing code …

Rfid Asset Tracking And Digital Check-Out System, Jeffrey (Jeff) Migliore

Computer Engineering

An asset tracking and digital check-out system was developed using Radio Frequency Identification (RFID) and a Single Board Computer (SBC). A RFID reader was used as a check point to process transactions. The RFID reader was attached to the SBC via USB. The SBC is integrated into a network via Ethernet and hosts a web graphical user interface (GUI) frontend for users to view transactions and query availability of assets. A MYSQL database was used for the backend storage of data.

Specifically, this system was designed to track tool assets. Many modern companies have employees sharing limited resources. The common …

The San Luis Obispo Children's Museum Energy Of Motion, Patrick Ligot, Brian Mich, Jaime Salazar, Erik Sanchez, Steven Azeka

Mechanical Engineering

No abstract provided.

Assessing Living Arrangements In Residential Halls, Romel Penaflor Auza

Industrial and Manufacturing Engineering

Hundreds of thousands of high school graduates head off to college each fall not knowing the environment they'll be living in for the next four years. The factors that predict success in the academic, social, and personal aspect of these freshmen students' lives revolves around one aspect that is often times overlooked. Freshmen students are subjected to the fast paced lifestyle of college and often times they need to feel “at home”. Their personal space becomes a matter that is important to them in relation to their success in the three aspects of academic success, social integration, and personal health. …

Roadway Related Tort Liability And Risk Management, Kenneth R. Agent

Kentucky Transportation Center Research Report

This workbook provides government employees background information related to tort liability and risk management. Past experience with lawsuits against government entities are summarized. The reasons for the lawsuits and results are analyzed. The objective is to provide an understanding of the basis for past claims so the number of future claims and awards can be reduced. This will result in the ultimate objective of reducing highway crashes.

Based on the results of the data analysis and the review of the background material, recommendations are made for consideration. Many of the recommendations deal with various types of documentation.

Optimization Of P3ht-Pcbm Polymer Solar Cells Through Device Simulation And Manufacturing, James Boom

Computer Engineering

Given a good model and implementation of that model, computer simulation can be used to reduce the time and material costs of research. To this end I worked with other students to manufacture, test and simulate the single layer P3HT-PCBM solar cell. Using the data collected from this project, future work can then be done with the project's simulator to further optimize these types of solar cell devices.

Epidermal Neural Crest Stem Cell (Epi-Ncsc)--Mediated Recovery Of Sensory Function In A Mouse Model Of Spinal Cord Injury, Yao Fei Hu, Krishnaj Gourab, Clive Wells, Oliver Clives, Brian D. Schmit, Maya Sieber-Blum

Biomedical Engineering Faculty Research and Publications

Here we show that epidermal neural crest stem cell (EPI-NCSC) transplants in the contused spinal cord caused a 24% improvement in sensory connectivity and a substantial recovery of touch perception. Furthermore we present a novel method for the ex vivo expansion of EPI-NCSC into millions of stem cells that takes advantage of the migratory ability of neural crest stem cells and is based on a new culture medium and the use of microcarriers. Functional improvement was shown by two independent methods, spinal somatosensory evoked potentials (SpSEP) and the Semmes-Weinstein touch test. Subsets of transplanted cells differentiated into myelinating oligodendrocytes. Unilateral …

Polyenvi, Stephen Beard, Josh Engel, Paul Fake, Diego Flores, Alvaro Nunez, Miguel Wong

Electrical Engineering

Poor indoor air quality is a problem that is recognized by the Environmental Protection Agency (EPA) to cause health issues. In order to raise awareness of this problem, this document outlines the construction of a device that economically measures air quality through five metrics: dust, smoke, ozone, humidity, and temperature. The device integrates with a router to provide users access to information about their indoor air quality anywhere over the internet as well as local access to the data via an LCD mounted on the router. By increasing indoor air quality awareness, this device will aid users in making adjustments …

Energy Harvesting From Exercise Machines Cal Poly Recreation Center Implementation, Justin Arakaki, Praveen Lawrence, Audrey Nakamura

Electrical Engineering

As Cal Poly moves towards an environmentally friendly campus, the Energy Harvesting from Exercise Machines (EHFEM) project looks to generate a new source of renewable energy to help power the Cal Poly Recreation Center. The project focuses on retrofitting exercise machines to generate electricity. As of December 2009, Audrey Nakamura, Justin Arakaki, and Praveen Lawrence developed a design which allows the contribution of electricity generated from multiple exercise machines into the power grid.

The project will require an investigation of retrofitted machine designs by Cal Poly students and commercially available products and systems. The information obtained from the product research …

Energy Harvesting From Exercise Machines: Bike Buck-Boost Converter, Monroe Diamond, Brian Vuong

Electrical Engineering

This project is a continuation of previous senior projects’ work on Energy Harvesting from Exercise Machines (EHFEM). EHFEM seeks an alternative DC to DC converter to function within the existing exercise bike system. Implementing this new DC to DC converter aims to avoid previous complications other groups encountered, such as only running at low load currents, exceeding an input threshold voltage to begin operation, and performing at low efficiency. In developing this self‐generating exercise bike, Cal Poly wishes to incorporate an array of energy‐harvesting exercise machines in its Recreation Center expansion scheduled for completion in 2012.

Strider, Eric Johnson, Alex Trask, Ricardo Garcia

Mechanical Engineering

No abstract provided.

Development Towards A Protocol To Test For The Creation Of A “Diabetic” Environment In A Blood Vessel Mimic, Kaitlyn Kirk, Development Towards A Protocol To Test For The Creation Of A “Diabetic” Environment In A Blood Vessel Mimic

Biomedical Engineering

Diabetes mellitus affects a huge proportion of people; about 6% of the population in the US had diabetes in 2007 (16). Diabetes promotes dyslipidemia, an imbalance in the circulating levels of lipids and lipoproteins, and diabetes is one of the leading risk factors for coronary artery and peripheral vascular diseases (11, 51, 52).  There are two types of diabetes; type 1 diabetes accounts for about 10% of diagnosed cases and type 2 accounts for about 90% (11).  Diabetic patients react differently to stents and there is a great need to enhance the treatment.  The goal of this project was, and …

Frontal Plane Humeral Elevation Effects On The Pullout Strength Of Suture Anchors Used In Rotator Cuff Repair, Peter Joshua Larson

Master's Theses

The rotator cuff offers the stabilizing forces necessary for fine arm movement. The most common injury to the rotator cuff is the partial or full thickness tear of the supraspinatus tendon, which attaches the humerus to the scapula on the superior side, due to an acute or chronic injury. These injuries account for more than 4.5 million physician visits per year. Depending on the degree of tear, arthroscopic surgery may be needed to reattach the torn tendon to the humeral head. The current preferred method of surgery involves the insertion of a suture anchor into the humeral head that ties …

Use Of Machine Learning Classification Techniques To Detect Atypical Behavior In Medical Applications, Terrence Ziemniak

Technical Reports

Health care informatics is growing at an incredible pace. Originally health care organizations, like all other industries, used pen and paper to track medical information. Ten years ago the more mature health care organizations had simply practice management applications. Today these organizations have full blown electronic health records systems. Tomorrow these organizations will be sharing information across the globe.

Physicians (and the sponsoring organizations) are obligated to protect this data. Health care has followed the trend of many other industries in implementing technologies and processes to address certain risks. Encryption is enabled to ensure confidentiality. Business continuity techniques are applied …

Practical Experience With State-Of-The-Art Technologies In Scada Systems, Beau Freeman, Charles M. Burt

BioResource and Agricultural Engineering

A Supervisory Control and Data Acquisition (SCADA) system is a powerful tool which, when implemented properly in irrigation districts, can lead to improved water delivery service to farms, more effective operations, reduced spill (and therefore reduced diversions), and in some cases a reduction in costs (less labor, less energy, etc.). However, widespread adoption of SCADA and automation technologies remains a technical and financial challenge for most irrigation districts. In spite of many good hardware and software products available on the market now, putting all the pieces together requires specialized expertise. Nevertheless, by following some straightforward strategies and rules of good …

Systems Engineering Analysis And Digital Communication Bus Design For The Cal Poly Super Project, Matt Marcus Camack

Master's Theses

With an expected lifetime of 20 years and an expected cost of $500, the Cal Poly Sustainable Power for Electrical Resources (SuPER) project needed a strong central design. This thesis looks at the work completed by students over the previous 5 years, with an eye on the future, to create the phase 2 design. Part of this new structure focuses on a distributed communication bus for monitoring system health and status. Instead of complex and costly computer or FPGA systems, the new system will run solely with microcontrollers. This reduces costs and will hopefully still be used within 5, 10, …

Magnetic Design Web Application, Michael Brim

Electrical Engineering

The automated Magnetic Design Web Application, available at http://www.magneticdesign.org, generates the full design process of a power transformer, gapped inductor and toroidal inductor given design specifications provided by the user. Calculations are accomplished using Area Product, Ap, or Core Geometry, Kg, procedures. All design processes mirror the format used in Dr. Taufik’s Introduction to Magnetic Design lecture-notes. An administrative backend is provided where instructors can add or modify core design values to expand the array of materials used. The project aims to aid student understanding of magnetic design and course concepts while allowing instructors to broaden the scope of material …

Antenna Development For Radio Frequency Hyperthermia Applications, Sergio Curto

Doctoral

This thesis deals with the design steps, development and validation of an applicator for radio frequency hyperthermia cancer therapy. An applicator design to enhance targeted energy coupling is a key enabler for preferential temperature increments in tumour regions. A single-element, near-field approach requires a miniaturised solution, that addresses ergonomic needs and is tolerant to patient anatomy. The antenna war-field rriodality and the high-dielectric patient loading introduce significant analytical and computational resource challenges. The antenna input impedance has to be sufficiently insensitive to in-band resonant cletuning and the fields in the tissue can he targeted to selected areas in the patient. …

Cell-Mediated Elastic Matrix Regeneration Toward Regression Of Abdominal Aortic Aneurysms, Carmen Gacchina

All Dissertations

Abdominal aortic aneurysms (AAAs) are typically fusiform (symmetric) dilations of the aortic wall most commonly arising below the renal arteries. The progression is typically associated with an activated smooth muscle cell (SMC) phenotype, diminished density of mature medial elastic fibers, and an elevated presence of matrix-degrading enzymes (e.g., matrix-metalloproteases; MMPs), which may ultimately lead to vessel rupture. Currently, no surgical or non-surgical methods are available to regress AAAs via regeneration of new elastin matrices to regain normal vessel contour, particularly due to the inherently poor elastin synthesis by adult vascular cells and absence of methods to stimulate the same. Previously, …

Damage Detection Via Structural Model Updating Using Frequency Response Functions And Genetic Algorithms, Bassam Sabry Fawzy Elsaid

Archived Theses and Dissertations

This thesis covers the development of a model updating technique which relies on the introduction of correction factors to the elemental stiffness matrix of a beam Finite Element Model (FEM). A Genetic Algorithm selects the values of correction factors by minimizing the difference between an experimentally measured Frequency Response Function (FRF) and the FRF calculated from the FEM being updated. The model updating technique was employed as a damage detection algorithm. The first phase of damage detection is to use model updating to eliminate experimental and modeling errors between the FRF of a beam measured experimentally and the FRF of …

Forecasting Consumer Satisfaction For Vehicle Ride Using The Mahalanobis-Taguchi Gram-Schmidt Technique, Elizabeth A. Cudney, Kenneth Ragsdell, Kioumars Paryani

Engineering Management and Systems Engineering Faculty Research & Creative Works

Consumers assess and perceive quality and performance at the vehicle level, but important cost-effective decisions at the sub-system or component level must be made by the producer in order to economically satisfy consumer needs by providing affordable products. Consumers evaluate vehicle attributes such as ride, handling, roominess, braking, and acceleration. These vehicle level attributes are influenced by factors at all levels of the vehicle architecture, and these factors are often correlated. the goal of this research is to efficiently forecast consumer satisfaction measured as a function of available vehicle level performance data. This article presents the application of the Mahalanobis-Taguchi …

Effect Of Simulated Visual Impairment On Nighttime Driving Performance, Joanne Wood, Alex Chaparro, Trent Carberry, Byoung Sun Chu

Publications

Purpose. This study investigated the effects of simulated visual impairment on nighttime driving performance and pedestrian recognition under real-road conditions.

Methods. Closed road nighttime driving performance was measured for 20 young visually normal participants (M = 27.5 +- 6.1 years) under three visual conditions: normal vision, simulated cataracts, and refractive blur that were incorporated in modified goggles. The visual acuity levels for the cataract and blur conditions were matched for each participant. Driving measures included sign recognition, avoidance of low contrast road hazards, time to complete the course, and lane keeping. Pedestrian recognition was measured for pedestrians wearing either black …

Measuring Atmospheric Scattering From Digital Images Of Urban Scenery Using Temporal Polarization-Based Vision, Tarek El-Gaaly

Archived Theses and Dissertations

Suspended atmospheric particles (particulate matter) are a form of air pollution that visually degrades urban scenery and is hazardous to human health and the environment. Current environmental monitoring devices are limited in their capability of measuring average particulate matter (PM) over large areas. Quantifying the visual effects of haze in digital images of urban scenery and correlating these effects to PM levels is a vital step in more practically monitoring our environment. Current image haze extraction algorithms remove all the haze from the scene and hence produce unnatural scenes for the sole purpose of enhancing vision. We present two algorithms …

Ecotourism And Water Quality: Linking Management, Activities And Sustainability Indicators In The Caribbean, Ken Darrie Thomas

USF Tampa Graduate Theses and Dissertations

Ecotourism from its genesis and founding theories has been set out to conserve and preserve the environment through sustainable operation that includes surrounding communities in efforts to reduce their poverty levels. Over the years ecotourism has been hypothesized to have departed from this ideal with several researchers, through social, qualitative analyses, have said that these non-sustainable ecotourism operations are simply due to poor management. This work sought to test this central hypothesis as a first approach to quantitatively linking ecotourism activities to management with surface water quality as the key indicator of sustainable ecotourism as a complex system through systems …

Exploiting The Concept Of Hysteresis In Ankle Dysfunction And Ankle Strengthening, Akshay Narendra Pujara

Theses

The ankle joint is an important part of the body which is responsible for normal gait cycle. Dorsiflexion, plantar flexion, inversion and eversion are four types of movements controlled by the ankle joint. All these movements are controlled by the ligaments and the muscles associated with the ankle. Disorders of these ligaments and muscles leads to ankle dysfunction.

The hysteresis concept was employed to determine if there is any ankle dysfunction. A recently developed device, the Ankle Torsion Monitor (AnTm) was employed to evaluate the viscoelasticity and stiffness of the ankle joint. The greater the hysteresis loop area (HLA) the …

Minimum Agitation Speed For Solid Suspension And Mixing Time In A Torispherical -Bottomed Pharmaceutical Stirred Tank Under Different Baffling Conditions, Dilanji Bhagya Wijayasekara

Theses

The minimum agitation speed, NS, required to just suspend solid particles dispersed in water was experimentally determined in this work for a glass-lined type of mixing tank provided with a torispherical bottom and agitated with a retreat-blade impeller under different baffling configurations. Ns for the same tank but equipped with a different agitation system, namely an axial impeller, was also experimentally determined for the purpose of comparing of performances of the two systems. The effect of impeller off- bottom clearance and the vessel's liquid level on the minimum agitation speed were also experimentally studied. Njs, was experimentally determined …