Digital Commons Network^™

Development Of A Task Assignment Tool To Customize Job Descriptions And Close Person-Job Fit Gaps, Bryan W. Booker

Dissertations

Does the knowledge worker fit the job or should the job fit the knowledge worker? This research developed a methodology and a tool to customize a knowledge worker’s job design to better fit their knowledge, skills, abilities and characteristics. The research outcomes support the customization of the job design to improve person-job fit, the documentation of the customized job design as a position description, and the use of a structured person-task assignment process. The recommended task assignment process includes a job aid that uses multivariate equations to predict expected task performance. Data were collected from two knowledge worker sub-groups: lean …

Relationships Between Muscle Contributions To Walking Subtasks And Functional Walking Status In Persons With Post-Stroke Hemiparesis, Allison Kinney, Carrie L. Peterson, Steven A. Kautz, Richard R. Neptune

Mechanical and Aerospace Engineering Faculty Publications

Walking speed is commonly used to predict stroke severity and assess functional walking status (i.e., household, limited community and community walking status) post-stroke. The underlying mechanisms that limit walking speed (and functional walking status by extension) need to be understood to improve post-stroke rehabilitation. Previous experimental studies have shown correlations between paretic plantarflexor output during the pre-swing phase and walking speed and suggest that the paretic hip flexors can compensate in some hemiparetic subjects. Modeling and simulation studies of healthy walking have shown that the ankle plantarflexors, soleus (SOL) and gastrocnemius (GAS), and uniarticular hip flexors (IL) are essential contributors …

Design And Validation Of An Mr Conditional Upper Extremity Evaluation System To Study Brain Activation Patterns After Stroke, Rubing Xu

Master's Theses (2009 -)

Stroke is the third leading cause of death and second most frequent cause of disability in the United States. Stroke rehabilitation methods have been developed to induce the cortical reorganization and motor-relearning that leads to stroke recovery. In this thesis, we designed and developed an MR conditional upper extremity reach and grasp movement evaluation system for the stroke survivors to study their kinematic performances in reach and grasp movement and the relationship between kinematic metrics and the recovery level measured by clinical assessment methods. We also applied the system into the functional MRI experiments to identify the ability to study …

Design Of A Transtibial Prosthesis Utilizing Active And Passive Components In Conjunction With A Four-Bar Mechanism, Bryan Bergelin

Master's Theses (2009 -)

This thesis outlines the design and testing of a powered ankle prosthesis which utilizes a four-bar mechanism in conjunction with a spiral torsion spring and a servo motor that mimics non-amputee (normal) ankle moments during the stance phase of gait. Previous research has shown that this novel approach is feasible, but the proof-of-concept prototype was not designed to be able to be worn by an amputee due to size, strength and mobility limitations. The goal of this research was to redesign the transtibial prosthesis to fit the requirements of the targeted amputee population. A preliminary virtual prosthesis was designed using …

Enhanced Anthocyanin Extraction From Red Cabbage Using Pulsed Electric Field Processing, Tanya K. Gachovska, David A. Cassada, Jeyamkondan Subbiah, Milford Hanna, Harshavardhan Thippareddi, Daniel D. Snow

Department of Agricultural and Biological Systems Engineering: Faculty Publications

This study was conducted to evaluate the effect of pulsed electric field (PEF) treatment on anthocyanin extraction from red cabbage using water as a solvent. Mashed cabbage was placed in a batch treatment chamber and subjected to PEF (2.5 kV/cm electric field strength; 15 μs pulse width and 50 pulses, specific energy 15.63 J/g). Extracted anthocyanin concentrations (16 to 889 μg/mL) were determined using HPLC. Heat and light stabilities of the control and PEF-treated samples, having approximately the same initial concentrations, were studied. PEF treatments enhanced total anthocyanin extraction in water from red cabbage by 2.15 times with a higher …

St. Jude Medical: An Object-Oriented Software Architecture For Embedded And Real-Time Medical Devices, Atila Amiri

Master's Theses

Medical devices used for surgical or therapeutic purposes require a high degree of safety and effectiveness. Software is critical component of many such medical devices. The software architecture of a system defines organizational structure and the runtime characteristic of the application used to control the operation of the system and provides a set of frameworks that are used to develop that. As such, the design of software architecture is a critical element in achieving the intended functionality, performance, and safety requirements of a medical device. This architecture uses object-oriented design techniques, which model the underlying system as a set of …

Electromechanical Modeling And Analysis Of A Self-Excited Micro-Power Generator, Amin Bibo

All Theses

Micro-power generators (MPGs) are compact, scalable, and low-maintenance energy harvesting devices that capture and transform wasted ambient energy into electricity.
Such devices, which are currently being researched as a possible replacement for batteries, can act as a power source to maintain and allow autonomous operations of
remote low-power consumption sensors. This thesis introduces a novel MPG which transforms wind energy into electricity via wind-induced self-excited oscillations
of piezoelectric cantilever beams. The operation concept of the device is simple: similar to music-playing harmonica that create tones via oscillations of reeds when
subjected to air blow, the proposed device uses flow-induced self-excited …

Hemocompatibility And Endothelialization Of Elastin And Collagen Scaffolds: The Role Of Plasma Proteins, Shear Stress And Integrins, Nithya Swaminathan

All Theses

Cardiovascular diseases are the leading cause of death worldwide as reported by the World Health Organization. Biomaterials have been extensively used in blood-contacting applications as heart valves, stents, grafts and catheters. However failure due to thrombosis hinders the long term patency and potential of these devices. Purified elastin scaffolds derived from porcine arteries as potential vascular graft materials are being investigated in our laboratory. In this study, we investigated the influence of factors such as shear stress and the presence of plasma proteins on the platelet response, and endothelial cell retention on purified elastin scaffolds to evaluate their hemocompatibility.

Elastin …

Detecting Piecewise Linear Networks Using Reversible Jump Markov Chain Monte Carlo, Akshay Apte

All Theses

This work proposes a piecewise linear network model to approximate structures observed in an image. An energy function is used to capture the characteristics of the structure. The energy function consists of two parts: the prior energy term and the data energy term. The prior energy term is calculated using prior information about the structures of interest. The data energy term is calculated using observations made from the image. The energy function is minimized using Reversible Jump Markov Chain Monte Carlo (RJMCMC) to get the approximate centerline of the structure. The algorithm was tested on a database of $150$ images …

Application Of Signal Advance Technology To Electrophysiology, Chris M. Hymel

Dissertations and Theses (Open Access)

Medical instrumentation used in diagnosis and treatment relies on the accurate detection and processing of various physiological events and signals. While signal detection technology has improved greatly in recent years, there remain inherent delays in signal detection/ processing. These delays may have significant negative clinical consequences during various pathophysiological events. Reducing or eliminating such delays would increase the ability to provide successful early intervention in certain disorders thereby increasing the efficacy of treatment.

In recent years, a physical phenomenon referred to as Negative Group Delay (NGD), demonstrated in simple electronic circuits, has been shown to temporally advance the detection of …

Kalman Filtering With State Constraints: A Survey Of Linear And Nonlinear Algorithms, Daniel J. Simon

Electrical and Computer Engineering Faculty Publications

The Kalman filter is the minimum-variance state estimator for linear dynamic systems with Gaussian noise. Even if the noise is non-Gaussian, the Kalman filter is the best linear estimator. For nonlinear systems it is not possible, in general, to derive the optimal state estimator in closed form, but various modifications of the Kalman filter can be used to estimate the state. These modifications include the extended Kalman filter, the unscented Kalman filter, and the particle filter. Although the Kalman filter and its modifications are powerful tools for state estimation, we might have information about a system that the Kalman filter …

Simulation And Mathematical Modeling To Support Community-Wide Evacuation Decisions For Multiple Population Groups, Jun Duanmu

All Dissertations

Evacuating a large population from an at-risk area has been the subject of extensive research over the past few decades. In order to measure trip completion and total evacuation times accurately, most researchers have implemented some combination of simulation and optimization methods to provide vehicular flow and congestion data. While the general at-risk population comprises the majority of travelers on the road network, there are often specific groups to consider when assessing the ability to evacuate an entire population. In particular, healthcare facilities (e.g., hospitals) may require evacuation, and the trip times may become an important health issue for patients …

Immunohistochemical Mapping Of Hypoxia In Ischemic Mouse Hindlimb Skeletal Muscle, Emily Deckert

Biomedical Engineering

The study of blood vessel growth and remodeling is a complex endeavor. Hypoxia, the lack of oxygen in a tissue, is known to stimulate angiogenesis (the growth of new blood vessels), and have little effect on arteriogenesis (the enlargement of existing blood vessels). However, the role of hypoxia in vessel function is unknown, but may be determined using the results and methods developed in this experiment.

Supplied by the bloodstream, oxygen is required by all cells and tissues to remain healthy. If the bloodstream supplying a certain tissue with blood is disrupted, the tissue becomes ischemic, often leading to hypoxia. …

Development Of Tissue Engineered Test Systems To Study Mammary Cell Interactions In Vitro, Cheryl Cass

All Dissertations

The work described in this dissertation was conducted in the interdisciplinary research environment of the Clemson University Institute for Biological Interfaces of Engineering. A note at the beginning of each chapter acknowledges, as relevant, collaborating doctoral students and reminds the reader where work from each chapter has been presented or published. The overall goal of this work was to develop tissue engineered test system methodologies to allow the study of mammary cell interactions in vitro. The background, as described in Chapter 1, was published in part in Philosophical Transactions of the Royal Society A in 2010. The studies were designed …

Macrophages Loaded With Gold Nanoshells For Photothermal Ablation Of Glioma: An In Vitro Model, Amani Riad Makkouk

UNLV Theses, Dissertations, Professional Papers, and Capstones

The current median survival of patients with glioblastoma multiforme (GBM), the most common type of glioma, remains at 14.6 months despite multimodal treatments (surgery, radiotherapy and chemotherapy). This research aims to study the feasibility of photothermal ablation of glioma using gold nanoshells that are heated upon laser irradiation at their resonance wavelength. The novelty of our approach lies in improving nanoshell tumor delivery by loading them in macrophages, which are known to be recruited to gliomas via tumor-released chemoattractive agents. Ferumoxides, superparamagnetic iron oxide (SPIO) nanoparticles, are needed as an additional macrophage load in order to visualize macrophage accumulation in …

High School Student Interests In Architecture, Construction, And Engineering Education, Krishna P. Kisi

UNLV Theses, Dissertations, Professional Papers, and Capstones

It is a common and widely held belief that the greatest influencing factor for high school students to enter an architecture-, construction-, or engineering-education program is because either their parents, relatives or friends work or have worked in the industry. However, there is little research that supports this belief. The focus of this research was to analyze characteristics and academic interests of Clark County School District (CCSD) Career and Technical Academies (CATA) students enrolled in architecture, construction and engineering (ACE) curricula.

This research analyzed data collected from a survey conducted by CCSD of their students enrolled in ACE courses. Comprehensive …

Investigation Of Potential Pathways And Multi-Cycle Bioregeneration Of Ion-Exchange Resin Laden With Perchlorate, Mohamadali Sharbatmaleki

UNLV Theses, Dissertations, Professional Papers, and Capstones

Ion-exchange (IX) is possibly the most feasible technology for perchlorate removal and perchlorate-selective and non-selective IX resins are commercially available for this purpose. The use of both resins has shortcomings. Selective resins are incinerated after one time use, and non-selective resins produce a regenerant waste stream that contains high concentration of perchlorate. A process involving directly contacting of spent IX resin containing perchlorate with perchlorate-reducing bacteria (PRB) to bioregenerate the resin has been developed and proven recently. In this process PRB biodegrade perchlorate ions which are attached to the functional groups of the resin.

Although its feasibility has been proven, …

A Shovel With A Perforated Blade Reduces Energy Expenditure Required For Digging Wet Clay, Sridhar Harivanam, Richard W. Marklin, Paula E. Papanek, Vikram Cariapa

Mechanical Engineering Faculty Research and Publications

Objective: A shovel with a blade perforated with small holes was tested to see whether a worker would use less whole-body energy to dig wet clay than with a shovel with an opaque blade.

Background: A perforated shovel is hypothesized to require less whole-body energy on the basis of adhesion theory; a smaller surface area would require less physical effort to dig and release soil from the blade.

Method: The study involved 13 workers from an electric utility who dug wet clay with two 1.5-m long-handled point shovels, which differed only in blade design (perforated and opaque). Oxygen consumption was …

Evaluation Of Toxicity Analysis For Foundry Sand Specifications, M. Katherine Banks, A. Paul Schwab

JTRP Technical Reports

Byproducts from many industries have the potential to be used as construction materials, but some means is required to determine if the material is environmentally benign. Foundry sands are produced in many states and can be useful as in transportation projects. However, INDOT currently requires the use of the MICROTOX test to assess the potential toxicity of the sands, and this requirement is viewed as an unnecessary impediment by the producers of foundry sands and is a requirement not encountered in other states. Therefore, the goal of this project was to review current requirements for testing of recycled materials, determine …

An Analytic Hierarchy Process Approach To Assess Health Service Quality, Yan Li

Theses and Dissertations - UTB/UTPA

While improving quality in health care is currently at the forefront of professional, political, and managerial attention, the key dimensions constituting health-care quality have not been fully understood. Also, few valid approaches have been proposed to the measurement of health-care quality. In this research, the Analytic Hierarchy Process (AHP) approach is applied to study the structure of health-care quality and deducted relative importance weights for each of the quality elements. A statistical quality model is derived to assess medical equipment quality which is an important part constituting the general health-care quality. Finally, the application of the AHP model to assess …

Evaluation Of Ethanol And Water Introduction Via Fumigation On Efficiency And Emissions Of A Compression Ignition Engine Using An Atomization Technique, Grant S. Janousek

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

Performance of a diesel engine, equipped for ethanol and water fumigation, was studied. The method implemented allowed for non-destructive introduction of liquids in advance of the turbocharger. Engine torque, speed, emission components, diesel and ethanol fuel rates were recorded and analyzed for each mixture of inputs. Based on the results of the study, thermal efficiency was not significantly different from the baseline diesel performance when using several ethanol and water mixtures. On the other hand, ethanol fumigation caused a significant reduction in NOx emissions and an increase in HC and CO emissions. No significant changes in CO2 or O2 occurred.

The Bi-Objective Master Physician Scheduling Problem, Aldy Gunawan, Hoong Chuin Lau

Research Collection School Of Computing and Information Systems

Physician scheduling is the assignment of physicians to perform different duties in the hospital timetable. In this paper, the goals are to satisfy as many physicians’ preferences and duty requirements as possible while ensuring optimum usage of available resources. We present a mathematical programming model to represent the problem as a bi-objective optimization problem. Three different methods based on ε–Constraint Method, Weighted-Sum Method and HillClimbing algorithm are proposed. These methods were tested on a real case from the Surgery Department of a large local government hospital, as well as on randomly generated problem instances. The strengths and weaknesses of the …

Combined Musculo-Skeletal Multi-Body Dynamics/Finite Element Analysis Of Several Ergonomics And Bio-Mechanics Problems, Xin Xie

All Theses

Within this thesis, two ergonomics (i.e. seating comfort and long-distance driving fatigue problems) and two structural bio-mechanics (i.e. femur-fracture fixation and radius-fracture fixation) problems are investigated using musculo-skeletal multi-body dynamics and finite element computational analyses.
Within the seating comfort problem analyzed, a complete-body finite element model is constructed and used to assess the effect of seat geometry and seating posture on the feel of comfort experienced by a seated human.
Within the long-distance driving fatigue problem, musculo-skeletal analysis is employed to assess the extent of fatigue experienced by a driver through the evaluation of level of activity of his/her various …

Cyber-Physical Codesign Of Distributed Structural Health Monitoring With Wireless Sensor Networks, Gregory Hackmann, Weijun Guo, Guirong Yan, Chenyang Lu, Shirley Dyke

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Our Deteriorating Civil Infrastructure Faces the Critical Challenge of Long-Term Structural Health Monitoring for Damage Detection and Localization. in Contrast to Existing Research that Often Separates the Designs of Wireless Sensor Networks and Structural Engineering Algorithms, This Paper Proposes a Cyber-Physical Co-Design Approach to Structural Health Monitoring based on Wireless Sensor Networks. Our Approach Closely Integrates (1) Flexibility-Based Damage Localization Methods that Allow a Tradeoff between the Number of Sensors and the Resolution of Damage Localization, and (2) an Energy-Efficient, Multi-Level Computing Architecture Specifically Designed to Leverage the Multi-Resolution Feature of the Flexibility-Based Approach. the Proposed Approach Has Been Implemented …

Characterizing Accuracy Of Total Hemoglobin Recovery Using Contrast-Detail Analysis In 3d Image-Guided Near Infrared Spectroscopy With The Boundary Element Method, Hamid R. Ghadyani, Subhadra Srinivasan, Brian W. Pogue, Keith D. Paulsen

Dartmouth Scholarship

The quantification of total hemoglobin concentration (HbT) obtained from multi-modality image-guided near infrared spectroscopy (IG-NIRS) was characterized using the boundary element method (BEM) for 3D image reconstruction. Multi-modality IG-NIRS systems use a priori information to guide the reconstruction process. While this has been shown to improve resolution, the effect on quantitative accuracy is unclear. Here, through systematic contrast-detail analysis, the fidelity of IG-NIRS in quantifying HbT was examined using 3D simulations. These simulations show that HbT could be recovered for medium sized (20mm in 100mm total diameter) spherical inclusions with an average error of 15%, for the physiologically …

A Methodology To Evaluate Obsolete Inventory In Health Care, Rama Thummalapalli

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

Many organizations are currently facing inventory management problems such as distributing inventory on-time and maintain the correct inventory levels to satisfy the customer or end users. Organizations understand the need for maintaining the accurate inventory levels but sometimes fall short leading a wide performance gap in maintaining inventory accurately. The inventory inaccuracy can consume much of the investment on purchasing inventory and many times leads to excessive inventory. The research objective of thesis is to provide a decision making criteria to the management for closing or maintaining the warehouse based on basic purchasing and holding cost information. The specific objectives …

Modeling, Design, And Testing Of Contact-Aided Compliant Mechanisms In Spinal Arthroplasty, Peter Andrew Halverson

Theses and Dissertations

Injury, instrumentation, or surgery may change the functional biomechanics of the spine. Spinal fusion, the current surgical treatment of choice, stabilizes the spine by rigid fixation, reducing spinal mobility at the cost of increased stress at adjacent levels. Recently, alternatives to spinal fusion have been investigated. One such alternative is total disc replacements. The current generation of total disc replacements (TDRs) focuses on restoring the quantity of motion. Recent studies indicate that the moment-rotation response and axis of rotation, or quality of motion (QOM), may have important implications in the health of adjacent segments as well as the health of …

Tribological Comparison Of Traditional And Advanced Firearm Coatings, Greg Boban

Master's Theses

The objective of this project is to find which type of coating has the best performance characteristics for finishing firearms. This is accomplished by measuring and comparing several performance characteristics, such as: adhesion, hardness, wear resistance, friction control, and corrosion resistance. Appearance is not a factor since any exterior coating that is flashy can be subdued or camouflaged with special purpose paints, which have proven durable enough for such purposes. Cost will not be a limiting factor for this experiment, but will be discussed in the conclusion as a secondary concern. This data will be used to identify the best …

Department Of Biological Systems Engineering Newsletter, Volume 6, Number 2, July 2010

BSE Department Magazine

No abstract provided.

In Vivo Non-Invasive Monitoring Of Optically Resonant Metal Nanoparticles Using Multi-Wavelength Photoplethysmography, Gregory J. Michalak

Doctoral Dissertations

Nanotechnology has recently emerged as a powerful modality in many biomedical applications. In particular, several classes of nanoparticles have been employed as cancer therapy and imaging contrast agents. These particles can have architecture of varying complexity, depending on their specific application. These complex architectures are achieved by various chemical techniques usually performed in specific sequences to add complexity and functionality. One such class of nanoparticle, used in tumor treatment and as contrast agents in several optical imaging techniques, is the plasmon resonant metal nanoparticle. The most common metal used for these particles is gold because of its biocompatibility, lack of …