Digital Commons Network^™

A Critical Review On Recent Methods Used For Economically Viable And Eco-Friendly Development Of Microalgae As A Potential Feedstock For Synthesis Of Biodiesel, Yogesh C. Sharma, Bhaskar Singh, John Korstad

College of Science and Engineering Faculty Research and Scholarship

Microalgae are being considered as a viable feedstock for large-scale production of biodiesel. However, though it may look simpler to obtain lipids from microalgae, the overall process of choosing an algal strain, cultivation, harvesting, dewatering, and extraction of oil is quite complicated and not economically prudent at this time. A thorough understanding of algae and the overall biodiesel production process discussed in this paper is vital so that focused research might lower the costs involved. Various diverse species of microalgae are currently being used as feedstocks for biofuel. Heterotrophic culture may be preferred over photoautotrophic cultivation. For cultivation, specially fabricated …

Label-Free Biochemical Recognition Using Mems Resonators For Microarray Technology, Babak Tousifar

Electronic Theses and Dissertations

Highly sensitive biosensors capable of detecting and characterizing smallest quantities of cellular and molecular targets are needed in pharmaceutical and medical diagnostics industries. In this work, the importance of biological target recognition specifically proteins through microarray technologies has been discussed and the most successful tools and techniques have been studied. Moreover, a thermally actuated Micro Electro-Mechanical Systems (MEMS) resonator has been demonstrated and fabricated in this work as an accurate, reliable and low cost biotechnology tool. As a proof of concept, amine to epoxide coupling of octadecylamine to functionalized silicon dioxide surface have been shown through resonator frequency monitoring. The …

Bedside Method To Estimate Actual Body Weight In The Emergency Department, Robert G. Buckley, Christine R. Stehman, Frank L. Dos Santos, Robert H. Riggenburgh, Aaron Swenson, Nathan Mjos, Matt Brewer, Sheila Mulligan

United States Navy: Publications

Background:

Actual body weight (ABW) is important for accurate drug dosing in emergency settings. Oftentimes, patients are unable to stand to be weighed accurately or clearly state their most recent weight.

Objective:

Develop a bedside method to estimate ABW using simple anthropometric measurements.

Methods:

Prospective, blinded, cross-sectional convenience sampling of adult Emergency Department (ED) patients. A multiple linear regression equation from Derivation Phase (n = 208: 121 males, 87 females) found abdominal and thigh circumferences (AC and TC) had the best fit and an inter-rater correlation of 0.99 and 0.96, respectively: Male ABW (kg) = -47.8 + 0.78 * (AC) …

Motivating Technical Writing Through Study Of The Environment, J. Linsdell, Thalia Anagnos

Faculty Publications

No abstract provided.

South Dakota State University College Of Engineering 2011 Annual Research Review, Office Of Engineering Research

Engineering Research Review

Contents:
Welcome
Securing Clean Water: Water and Environmental Engineering Research Center
Raising Awareness: South Dakota Wind Application Center
Capturing the Globe: Image Processing Laboratory
Harnessing Renewable Energy: Center for Advanced Photovoltaics
Alternative Power Technologies Laboratory
Ensuring Quality: Materials Evaluation and Testing Laboratory
Improving Infrastructure: Jerry Lohr Structures Laboratory

Review Of Assessment, Design, And Mitigation Of Multiple Hazards, Aakash Ahuja

Dissertations, Master's Theses and Master's Reports - Open

Large parts of the world are subjected to one or more natural hazards, such as earthquakes, tsunamis, landslides, tropical storms (hurricanes, cyclones and typhoons), costal inundation and flooding. Virtually the entire world is at risk of man-made hazards. In recent decades, rapid population growth and economic development in hazard-prone areas have greatly increased the potential of multiple hazards to cause damage and destruction of buildings, bridges, power plants, and other infrastructure; thus posing a grave danger to the community and disruption of economic and societal activities. Although an individual hazard is significant in many parts of the United States (U.S.), …

Santa Clara Magazine, Volume 53 Number 1, Summer 2011, Santa Clara University

Santa Clara Magazine

18 - WHAT DO INVESTORS REALLY WANT? By Meir Statman. A renowned behavioral finance expert reveals how our desires shape our actions when it comes to investing. (Hint: It's not just money that we're after.)

20 - LAW AT 100. A century of legal education at SCU. See snapshots from across the years-and look at the big picture of how the legal landscape has changed

22 - THE BIG IDEA!: Michael S. Malone '75, MBA '77 on Silicon Valley high tech gold and a brief history of intellectual property law.

24 - WOMEN'S WORK: Stephanie M. Wildman on jobs, the …

Santa Clara Magazine, Volume 53 Number 2, Fall 2011, Santa Clara University

Santa Clara Magazine

18 - CHANGE THE WORLD. OR AT LEAST HOW YOU SEE IT. Edited by John Deever and Steven Boyd Saum. The U.S. Peace Corps turned 50 this year, with more than 340 Santa Clara grads (and faculty and staff) having served as volunteers over the years. A few of them recount their time in-country-and where it's taken them.

26 - HOW CAN YOU DEFEND THOSE PEOPLE? by Steven Boyd Saum. Public defenders on the Homicide Task Force in Chicago have heard that question time and again. Between them, Robert Strunck '76 and Crystal Marchigiani '78 have some 40 years on …

Relationship Of Surface Changes To Metal Leaching From Tungsten Composite Shot Exposed To Three Different Soil Types, Deborah Felt, Steven Larson, Chris Griggs, Catherine Nestler, Michelle Wynter

United States Army: Publications

Physical changes that occur on the surface of fired shots due to firing and impact with soil may increase the dissolution of muniton metals. Increased metal dissolution could potentially increase metal transport and leaching, affecting metal concentrations in surface and groundwater. This research describes the relationship between the surface changes on fired tungsten–nickel–iron (94% W:2% Ni:4% Fe) composite shots and metals leaching from those shots. Tungsten composite shot was fired into, and aged in, three soil types (Silty Sand, Sandy Clay, and Silt) in mesoscale rainfall lysimeters to simulate live-fire conditions and subsequent interactions between the metals of the composite …

Safety And Protective Efficacy Of Ina-Inactivated Venezuelan Equine Encephalitis Virus: Implication In Vaccine Development, Anuj Sharma, Paridhi Gupta, Pamela J. Glass, Michael D. Parker, Radha K. Maheshwari

United States Army: Publications

We have previously shown that a hydrophobic alkylating compound, 1,5-iodonaphthyl-azide (INA) can efficiently inactivate the virulent strain of Venezuelan equine encephalitis virus (VEEV), V3000 in vitro. In this study, we have evaluated the safety of INA-inactivated V3000 and V3526 and the protective efficacy of INA-inactivated V3000. INA-inactivated V3000 and V3526 did not cause disease in suckling mice. RNA isolated from the INA-inactivated V3000 and V3526 was also not infectious. Immunization of adult mice with INA-inactivated V3000 induced an anti-VEEV antibody response and protected mice from virulent VEEV challenge. The protective efficacy of INA-inactivated V3000 increased with the use of adjuvants. …

Ua3/9/2 I.T. Division Annual Report + Tactical Plan, Wku Information Technology

WKU Administration Documents

Annual report of WKU Information Technology Division submitted to WKU President Gary Ransdell. Report is housed in UA3/9/2 Subject Files.

Nitric Oxide-Generating Silicone As A Blood-Contacting Biomaterial, Kagya Amoako

Mechanical and Industrial Engineering Faculty Publications

Coagulation upon blood-contacting biomaterials remains a problem for short and long-term clinical applications. This study examined the ability of copper(II)-doped silicone surfaces to generate nitric oxide (NO) and locally inhibit coagulation. Silicone was doped with 3-micron copper (Cu(0)) particles yielding 3 to 10 weight percent (wt%) Cu in 70-μm thick Cu/Silicone polymeric matrix composites (Cu/Si PMCs). At 3, 5, 8 and 10 wt% Cu doping, the surface expression of Cu was 12.1 ± 2.8%, 19.7 ± 5.4%, 29.0 ± 3.8%, and 33.8 ± 6.5% respectively. After oxidizing Cu(0) to Cu(II) by spontaneous corrosion, NO flux, JNO (mol*cm−2*min−1), as measured by …

Evaluating "Independent" Assessment Of Capstone Projects By Mechanical Engineering Students In Dit, Kevin Delaney

Conference Papers

A review has recently been conducted to evaluate the process from the perspective of both students and staff with a view to determining whether or not this structure should be continued with. This paper documents the rationale behind the concept, the logistical challenges, and an analysis of the feedback received from both students and staff as part of the review. In addition, future plans to improve the fairness, consistency and transparency of the assessment process for such projects are outlined.

Hybrid Sensing And Adaptive Control For Direct Brain Actuation Of Artificial Limbs, Christopher Aasted

Electronic Theses and Dissertations

Developing a non-invasive direct brain control of artificial limbs is both challenging and desirable. Such a sensory and control system, if successful, will have a profound impact on the disabled. In this dissertation, we present the design and development of a non-invasive, hybrid sensory system, which uses near-infrared spectroscopy (NIRS) and electroencephalography (EEG) to measure brain activity with simultaneous electromyography (EMG) to provide feedback data in a healthy limb. Through the combination of these sensory techniques, we have successfully trained a control system capable of mapping brain activity onto muscle actuation. The design of a control algorithm capable of automatic …

Cottonwood Management Plan/Programmatic Environmental Assessment Proposed Implementation Of A Cottonwood Management Plan Along Six Priority Segments Of The Missouri River

United States Army Corps of Engineers, Omaha District

The U.S. Army Corps of Engineers (Corps) proposes to preserve existing stands and reestablish new stands of plains cottonwood (Populus deltoides) at selected public/government lands along the Missouri River in accordance with the Cottonwood Management Plan (CMP). The Proposed Action is the implementation of the CMP. The goal of the plan is to be a living document that preserves, creates, or restores cottonwood habitats along the Missouri River and meets the requirements of the USFWS 2003 Amended Biological Opinion (BiOp) concerning the bald eagle (Haliaeetus leucocephalus). The principal immediate focus of the CMP includes measures in …

2010/11 Research, Development, And Activities, College Of Engineering And Applied Sciences

Electrical and Computer Engineering Newsletter

• Center for Advanced Smart Sensors and Structures (CASSS)
• Vehicular Ad Hoc Network Augmenting GPS Systems
• In-Flight Discreet Wireless Communication System
• Dual-Use Ground Vehicle Condition-Based Maintenance
• Neurobiology Engineering Laboratory
• CEAS Students Win Stryker Challenge!
• Earth Today iPhone Application for JPL’s Earth Sciences Directorate

A Possible Pathway For High School Science In A Stem World, Cary Sneider

Publications

Today‘s high school science teachers find themselves in a period of transition. For the past decade there have been calls for replacing a narrow focus on science education—the traditional courses in physics, chemistry, biology, and Earth and space science—with a broader curriculum on STEM (that is, the four allied fields of science, technology, engineering, and mathematics). However, at present there are no guidelines on what that broader curriculum should include or how it should be designed, and the gulf that has separated science and mathematics seems as wide as ever, despite decades of efforts to bridge the two disciplines. Next …

Mapping Engineering Concepts For Secondary Level Education, Jenny L. Daugherty

Publications

Much of the national attention on science, technology, engineering, and mathematics (STEM) education tends to concentrate on science and mathematics, with its emphasis on standardized test scores. However as the National Academy of Engineering Committee on K-12 Engineering Education stressed, engineering can contribute to the development of an effective and interconnected STEM education system (Katehi, Pearson, & Feder, 2009). In addition, engineering can provide authentic learning contexts for science, technology, and mathematics. Numerous K-12 engineering initiatives have emerged across the U.S. developing curriculum and conducting teacher professional development (Brophy, Klein, Portsmore, & Rogers, 2008). The focus of pre-college engineering education …

Mapping Engineering Concepts For Secondary Level Education, J. L. Daugherty

Publications

No abstract provided.

Design Problems For Secondary Students, David H. Jonassen

Publications

Are there different kinds of design problems? According to Brown and Chandrasekaran (1989), Class 1 design problems are open-ended, non-routine creative activities where the goals are ill-structured, and there is no effective design plan specifying the sequence of actions to take in producing a design model. Class 2 problems use existing, well-developed design and decomposition plans (e.g. designing a new automobile). Class 3 designs are routine where design and decomposition plans are known as well as customary actions taken to deal with failures (e.g., writing a computer program). Jonassen (2011) argued that problems vary in terms of structuredness, complexity, and …

Accidental Releases Of Hazardous Materials And Relevance To Terrorist Threats At Industrial Facilities, Laura J. Steinberg, Nicholas Santella

Civil and Environmental Engineering - All Scholarship

Hazardous material releases, some with serious consequences, are a common occurrence in the U.S. Of late, the hazards posed by releases caused by terrorist attacks or natural disasters have been of particular concern. Although terrorism directed at hazardous material handling industries within the U.S. has not yet resulted in a significant incident, there is much recent experience with serious accidental releases resulting from natural disasters. Case studies are developed from a number of recent natural disasters and severe weather events that resulted in large releases of hazardous materials. These case studies are used to illustrate parallels between the risks posed …

Development Of A Cognitive Work Analysis Framework Tutorial Using Systems Modeling Language, Wilfred Henry Wells

Electronic Theses and Dissertations

At the present time, most systems engineers do not have access to cognitive work analysis information or training in terms they can understand. This may lead to a disregard of the cognitive aspect of system design. The impact of this issue is system requirements that do not account for the cognitive strengths and limitations of users. Systems engineers cannot design effective decision support systems without defining cognitive work requirements. In order to improve system requirements, integration of cognitive work requirements into the systems engineering process has to be improved. One option to address this gap is the development of a …

Harmony Oriented Architecture, Kyle A. Martin

Electronic Theses and Dissertations

This thesis presents Harmony Oriented Architecture: a novel architectural paradigm that applies the principles of Harmony Oriented Programming to the architecture of scalable and evolvable distributed systems. It is motivated by research on Ultra Large Scale systems that has revealed inherent limitations in human ability to design large-scale software systems that can only be overcome through radical alternatives to traditional object-oriented software engineering practice that simplifies the construction of highly scalable and evolvable system. HOP eschews encapsulation and information hiding, the core principles of objectoriented design, in favor of exposure and information sharing through a spatial abstraction. This helps to …

Structural Health Monitoring For Damage Detection Using Wired And Wireless Sensor Clusters, Thomas Terrell

Electronic Theses and Dissertations

Sensing and analysis of a structure for the purpose of detecting, tracking, and evaluating damage and deterioration, during both regular operation and extreme events, is referred to as Structural Health Monitoring (SHM). SHM is a multi-disciplinary field, with a complete system incorporating sensing technology, hardware, signal processing, networking, data analysis, and management for interpretation and decision making. However, many of these processes and subsequent integration into a practical SHM framework are in need of development. In this study, various components of an SHM system will be investigated. A particular focus is paid to the investigation of a previously developed damage …

Introduction: Advances In E-Business Engineering, Ling Li

Information Technology & Decision Sciences Faculty Publications

(First paragraph) E-business is more than just e-commerce. It is one of the most challenging areas for industry and research communities. E-business has evolved from business-to-business, business-to-customer, customer-to-business, customer-to-customer, and business-to-government systems to the integrated and collaborative business services among various information systems and e-marketplaces. In this evolving process, integrated e-business systems and their related supporting platforms have to be rapidly designed and developed in order to meet different requirements. A variety of e-business engineering paradigms and technologies have been developed to tackle these challenges. There are many research issues needed to be addressed. These issues include heterogeneous services integration, …

Design Of An Implant For First Metatarsophalangeal Joint Hemiarthroplasty, Atul Kumar

ETD Archive

Osteoarthritis (OA) is the most common form of arthritis and it affects 27 million US adults. OA disease involves all of the tissues of the diarthrodial joint and ultimately, may lead to softening, ulceration, loss of articular cartilage, sclerosis and polished appearance of the subchondral bone, osteophytes, and subchondral cysts. The first metatarsophalangeal joint (MTPJ1) is affected in up to 42 cases of OA. Besides osteoarthritis, other conditions such as rheumatoid arthritis and gout also affect the MTPJ1. Involvement of MTPJ1 with these conditions invariably leads to deformed toe such as hallux valgus and hallux rigidus. Over 150 surgical techniques …

Dietary Supplement Wastewater Treatment By Biological Methods, Xiangting Hou

ETD Archive

Dietary supplements, pre-mixed meal like Slim Fast, are part of most people's lives. Since dietary supplements have a high order of complex sugars, low-fat milk, and all kinds of nutrients, they bring hazards to the environment if discharged to water bodies without any proper treatment. Therefore, wastewater from dietary supplement gains much more attention at the present time. Dietary supplement wastewater contains amounts of organic compounds which may be bio- friendly and non-toxic. Biological treatment shows its strong advantages in dealing with this kind of wastewater.In this research, four kinds of Live Liquid Micro-organisms (LLMO) were used as the sources …

Electrocoagulation/Flotation Treatment Of Synthetic Surface Water, Sampath Gunukula

ETD Archive

Rainfall generated surface runoff water could contaminate groundwater through transportation of suspended solids and organic matter in to the aquifer. Surface runoff water composition mainly depends on soil amendment. Surface runoff mainly contains clay, minerals, organic and inorganic matter, total dissolved lead, zinc. ECF technology presents an alternative for the removal of total suspended solids, turbidity, and organic matter from generated surface runoff water. This research presents development of bench scale ECF unit for the treatment of synthetic surface water. Experiments were conducted in a 10 liter Plexiglas unit provided with two aluminum electrodes, one serving as cathode, and other …

A Cfd Model Of Mixing In A Microfludic Device For Space Medicine Technology, Terri Lynn Mckay

ETD Archive

The DNA Medicine Institute (DMI) is currently developing a device to be used for blood analysis to satisfy the unique requirements of space medicine applications. A key component of that device is the micromixer, which will ensure mixing and dilution of reagents utilized for detection assays. As part of the device design process, the micromixer was modeled, and the mixing characteristics were analyzed and compared to experimental data. The experimental data was based on a top-view of the system and, lacking data throughout the fluid domain, could not provide the insight into the mixing process that modeling could readily provide. …

Evaluation Of Lean Systems In Rail Maintenance Operations, Mert Baykut

ETD Archive

The recognized strength of lean systems is its broad applicability to every process industry even though they include some complicated and time-intensive processes. However, this conception is based on the tools and philosophy of Lean systems and the nature of the industry. The required craftsmanship and repetitive processes in rail maintenance define the uniqueness of this research The objective of this thesis was to research the opportunities and applicability for lean systems in rail maintenance. During the research a unique system, consisting of Lean systems and systems engineering tools, is realized and tried to integrate instead of a pure Lean …