Digital Commons Network^™

Development Of Physiologic Contact Models For Articular Surfaces, John Owen

Theses and Dissertations

The superficial tangential zone (STZ) plays a significant role in normal articular cartilage’s ability to support loads and retain fluids. To date, tissue engineering efforts have not replicated normal STZ function in cartilage repairs. Finite element models were developed to examine the STZ’s role in normal and repaired articular surfaces under different contact conditions. Models were developed by incrementally adding improvements which culminated in contact loading of curved models by permeable and impermeable rigid surfaces and a normal cartilage layer. In the normal STZ, permeability was strain-dependent on volumetric strain; tension-compression nonlinearity modeled collagen behavior. Nonlinear geometry accounted for finite …

Development Of A Phase Separation Model For A Biodiesel Reactor, Lu Han

Honors Scholar Theses

The goal of this work is to establish a phase separation model for a biodiesel system, for the purpose of modeling a continuous flow multiphase biodiesel reactor. The Cahn-Hilliard theory is applied for a ternary system of two immiscible components and a third partially miscible component. The results of this work shows that phase field theory can be applied in phase modeling of a biodiesel system, and further investigations are required to develop a comprehensive biodiesel reactor model.

Near Infrared Imaging System, Barbara Adu-Baffour

Honors Scholar Theses

This senior project is to design and fabricate a near infrared imaging system using laser diodes for imaging biological tissues. The device will have three major sections comprising the signal source, detection and data analysis sections.

In the source signal section, a circuit would be designed and built which will contain two laser diodes with different wavelengths (780nm and 830nm). Each of the two laser diodes will modulated at different frequencies to enable a spatial coding system. The detection section of the device will have an optical detector channel which will be designed to detect signals from all the laser …

Noninvasive Assessment Of Joint Motion Over Long Durations: System Evaluation And Data Analysis Methods, Maria J. Qadri

Master's Theses

The development, progression, and treatment of degenerative musculoskeletal diseases, such as carpal tunnel and shoulder impingement syndromes, may be better characterized when joint motions are assessed over long durations outside clinical, laboratory, or rehabilitation settings that involve standardized assessment, exercise protocols, and/or regimented movements. Assessment methods for human movement capture beyond laboratory or clinical experiments are typically limited to short capture times of less than one hour. Noninvasive, long-duration measurements of joint motion in occupational settings provides more insight into movement patterns and quantitative assessments regarding joint usage, which lead to a better understanding of the cumulative effects associated with …

A Comparative Study Of Total Hemoglobin Measurement Technology: Noninvasive Pulse Co-Oximetry And Conventional Methods, Jared S. Ruckman

Master's Theses

Hemoglobin can be measured on a variety of devices using different principles of operation. Noninvasive pulse CO-oximetry represents the latest development in hemoglobin measuring technology. The technology uses principles similar to pulse oximetry to measure total hemoglobin, oxyhemoglobin, reduced oxyhemoglobin, carboxyhemoglobin and methemoglobin. Similar to the introduction of pulse oximetry to the medical field, pulse CO-oximetry has been met with skepticism. Since the technology is noninvasive and provides continuous monitoring in comparison to invasive and discrete techniques used in other methods, CO-oximetry purportedly provides an advantage in patient care. The purpose of this research is threefold: (a) to review the …

The Use Of Motion Analysis Technology As An Alternative Means Of Assessing Spinal Deformity In Patients With Adolescent Idiopathic Scoliosis, Matthew J. Solomito

Master's Theses

Adolescent Idiopathic Scoliosis (AIS) is a three dimensional deformity of the spine that causes abnormal curvatures in the coronal and sagittal planes and abnormal vertebral rotations. The gold standard for diagnosing and tracking the progression of the deformity is through the use of repeated radiography and a patient can receive upwards of fifteen radiographic series over the course of treatment, which exposes this population to an increased risk of radiation-dependent complications.

This thesis presents the necessary calculations and the marker set required to make the motion capture technology a viable alternative to radiographs, in an effort to reduce the patient’s …

Design Of A Pragmatic Test Lab For Evaluating And Testing Wireless Medical Devices For Deployment On An Integrated It Wireless Network, Allie Paquette

Master's Theses

In today’s healthcare environment, networking of medical devices is becoming more and more prevalent. There is an increasing need for mobile technology to meet clinical needs. Wireless communication is essential for allowing medical devices to be able to move with the patient, while continuing to record and communicate patient data. A traditional example is telemetry monitoring, but other examples of wireless utilization include sending ECG test results to the EMR or remotely updating the drug library on numerous IV pumps. Each wireless application has varying demands on the connectivity infrastructure and will share radio frequency (RF) spectrum resources with a …

Characterization And Implementation Of Low Intensity Pulsed Ultrasound As A Tool To Apply Physical Load To Scaffolds And Bone Cells For Fracture Repair, Scott Frazee

Master's Theses

One current challenge in treating bone fractures is the effective treatment of non-unions and delayed unions. Low Intensity Pulsed Ultrasound (LIPUS) has been approved by the FDA to treat fresh fractures since 1994 and non-unions since 2000 and is an attractive treatment option because it is non-invasive. The mechanism by which it works, however, is not well understood; what is known is largely confined to the resultant changes in chemical output of cells. In this thesis several concepts and techniques were brought together to investigate the following hypothesis: LIPUS produces a measurable physical load that results in measurable deformation and …

Campus Grids: A Framework To Facilitate Resource Sharing, Derek J. Weitzel

School of Computing: Dissertations, Theses, and Student Research

It is common at research institutions to maintain multiple clusters. These might fulfill different needs and policies, or represent different owners or generations of hard- ware. Many of these clusters are under utilized while researchers at other departments may require these resources. This may be solved by linking clusters with grid mid- dleware. This thesis describes a distributed high throughput computing framework to link clusters without changing security or execution environments. The framework initially keeps jobs local to the submitter, overflowing if necessary to the campus, and regional grid. The framework is implemented spanning two campuses at the Holland Computing …

Vapor Transport And Aerosol Dynamics In The Respiratory Airways, Geng Tian

Theses and Dissertations

Predicting vapor transport and aerosol dynamics in the respiratory airways is important for analyzing both environmental exposure and respiratory drug delivery. A large number of analytical models, computational studies, and experiments on vapor and aerosol transport in the respiratory tract have been conducted previously. However, a number of critical questions remain unanswered. In this study, computational fluid dynamics (CFD) is primarily employed with frequent comparisons to existing and new experimental data sets to address previously unanswered issues related to the transport of vapors and aerosol in the respiratory tract. The three objectives of this study are further described below. Objective …

Investigations On The Micro-Scale Surface Interactions At The Tool And Workpiece Interface In Micro-Manufacturing Of Bipolar Plates For Proton Exchange Membrane Fuel Cells, Mevlut Fatih Peker

Theses and Dissertations

Micro-forming studies have been more attractive in recent years because of miniaturization trend. One of the promising metal forming processes, micro-stamping, provides durability, strength, surface finish, and low cost for metal products. Hence, it is considered a prominent method for fabricating bipolar plates (BPP) with micro-channel arrays on large metallic surfaces to be used in Proton Exchange Membrane Fuel Cells (PEMFC). Major concerns in micro-stamping of high volume BPPs are surface interactions between micro-stamping dies and blank metal plates, and tribological changes. These concerns play a critical role in determining the surface quality, channel formation, and dimensional precision of bipolar …

Removal Of Nitrate From Water Using Fluidized Bed Ion Exchange Column, Ammar Arab Beddai, Basava Rao

10th International Conference on Circulating Fluidized Beds and Fluidization Technology - CFB-10

Experimental and theoretical studies were carried out to investigate the performance of a fluidized bed ion exchange system to remove nitrate. The exchange of nitrate on strong anion exchange resin (TULSION A-27) was studied in the flow rate range of 2 to 7 L/h. Nitrate removal was done at five conditions of the expanded bed height (Z). The results showed that the experimental data can be fitted to Richardson and Zaki equation, and the comparison between the experimental and calculated terminal velocities showed low relative error

National Water Footprint Accounts: The Green, Blue And Grey Water Footprint Of Production And Consumption. Volume 1: Main Report, Mesfin Mekonnen, Arjen Y. Hoekstra

Daugherty Water for Food Global Institute: Faculty Publications

This study quantifies and maps the water footprints of nations from both a production and consumption perspective and estimates international virtual water flows and national and global water savings as a result of trade. The entire estimate includes a breakdown of water footprints, virtual water flows and water savings into their green, blue and grey components. The main finding of the study can be summarized as:

The global water footprint in the period 1996-2005 was 9087 Gm3/yr (74% green, 11% blue, 15% grey). Agricultural production contributes 92% to this total footprint.

About one fifth of the global water footprint relates …

National Water Footprint Accounts: The Green, Blue And Grey Water Footprint Of Production And Consumption, Volume 2: Appendices, Mesfin Mekonnen, Arjen Y. Hoekstra

Daugherty Water for Food Global Institute: Faculty Publications

Contents

Appendix I. The water footprint of national production (Mm³/yr)

Appendix II. Virtual-water flows related to trade in crop, animal and industrial products, per country (Mm³/yr)

Appendix III. International virtual-water flows per product category (Mm³/yr)

Appendix IV. National water saving related to trade in agricultural and industrial products per country (Mm³/yr)

Appendix V. Global water saving related to trade in agricultural and industrial products, per product (Mm³/yr)

Appendix VI. The average water footprint per ton of commodity per country, weighted based on origin (WF* in m³/ton)

Appendix VII. …

Joggler: Data Harvest And Analysis Tool, Ondrej Nebesky

Departmental Technical Reports (CS)

Linear-Time Resource Allocation In Security Games With Identical Fully Protective Resources, Octavio Lerma, Vladik Kreinovich, Chris Kiekintveld

Departmental Technical Reports (CS)

Game theory has become an important tools for making resource allocations decision in security domains, including critical infrastructure protection. Many of these games are formulated as Stackelberg security games. We present new analysis and algorithms for a class of Stackelberg security games with identical, fully protective defender resources. The first algorithm has worst-case complexity linear in the number of possible targets, but works only for a restricted case. The second algorithm can find and optimal resource allocation for the general case in time O(n log(n)).

When Is Busemann Product A Lattice? A Relation Between Metric Spaces And Corresponding Space-Time Models, Hans-Peter Künzi, Francisco Zapata, Vladik Kreinovich

Departmental Technical Reports (CS)

The causality relation of special relativity is based on the assumption that the speed of all physical processes is limited by the speed of light. As a result, an event (t,x) occurring at moment t at location x can influence an event (y,s) if and only if s >= t+d(x,y)/c. We can simplify this formula if we use units of time and distance in which c=1 (e.g., by using a light second as a unit of distance). In this case, the above causality relation takes the form s >= t+d(x,y). Since the actual space can be non-Euclidean, H. Busemann generalized …

Uniqueness Of Reconstruction For Yager's T-Norm Combination Of Probabilistic And Possibilistic Knowledge, Nitaya Buntao, Vladik Kreinovich

Departmental Technical Reports (CS)

Often, about the same real-life system, we have both measurement-related probabilistic information expressed by a probability measure P(S) and expert-related possibilistic information expressed by a possibility measure M(S). To get the most adequate idea about the system, we must combine these two pieces of information. For this combination, R. Yager -- borrowing an idea from fuzzy logic -- proposed to use a t-norm f(a,b)$ such as the product f(a,b)=a*b, i.e., to consider a set function f(S)=f(P(S),M(S)). A natural question is: can we uniquely reconstruct the two parts of knowledge from this function f(S)? In our previous paper, we showed that …

Towards Optimal Knowledge Processing: From Centralization Through Cyberinsfrastructure To Cloud Computing, Octavio Lerma, Eric Gutierrez, Chris Kiekintveld, Vladik Kreinovich

Departmental Technical Reports (CS)

One of the most efficient way to store and process data is cloud computing, when we store the data so as to minimize the expenses and increase the efficiency. In this paper, we provide an analytical solution to the corresponding optimization problem.

Estimating Probability Of Failure Of A Complex System Based On Partial Information About Subsystems And Components, With Potential Applications To Aircraft Maintenance, Christelle Jacob, Didier Dubois, Janette Cardoso, Martine Ceberio, Vladik Kreinovich

Departmental Technical Reports (CS)

Application Of Existing Appropriate Technology To Small Communities In Honduras's Opalaca Mountains, Adrian Beirise

Mechanical Engineering Undergraduate Honors Theses

In a 2009 trip to the Opalaca Mountain region of Honduras, a need was identified for appropriate technology solutions to three key issues: housing improvements related to Chaga's Disease, indoor smoke reduction, and pure water. Through research regarding the problems, the local area, and candidate solutions, a set of three solutions was found. This includes corrugated steel roofing, vented or simple adobe rocket stoves, and solar disinfection.

Simple And Appropriate Methods For Household Water Treatment, Morris Elya Demitry

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

Shortage of drinking water is the big challenge for Sudan. The cost of water treatment is the main reason for using untreated water for drinking purposes in many urban areas in Sudan. Water born‐diseases (diarrhea, typhoid, etc) are common and there are many victims in unimproved urban areas in Khartoum (Sudan) due to poor or the lack of treatment of drinking water.

In this work, a simple and appropriate method (sand filter) for household water treatment was tested and developed. The main objective of using this method is to help people in urban areas without access to treated water to …

Combating Antibiotic Resistance Through Development Of A Novel Antimicrobial Delivery Vehicle, Alex Hatch

Undergraduate Honors Capstone Projects

A thermoreversible gel for antimicrobial agent delivery would provide a novel platform suitable for medical applications from persistent infections arising from localized biofilms. Thermoreversible gels could be used to coat medical implants, to inject for subdermal treatments, or to implement in topical applications. FDA approved Pluronics® form thermoreversible gels and certain Pluronics® display inherent varying degrees of antimicrobial activity. Pluronics® have been shown to affect efflux pumps, and reduce ATP levels within the bacterial cell. In combination with antibiotics and other pharmaceuticals, Pluronics® have been used to sequester drugs and act as a delivery vehicle. With advances in nanomedicine, nanoparticles …

Live Load Test And Finite Element Model Analysis Of A Box Girder Bridge For The Long Term Bridge Performance Program, Dereck J. Hodson

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The Long Term Bridge Performance (LTBP) Program is a 20-year program initiated by the Federal Highway Administration to better understand the behavior of highway bridges as they deteriorate due to environmental variables and vehicle loads. Part of this program includes the periodic testing of selected bridges.

The Lambert Road Bridge was subjected to nondestructive testing in the fall of 2009. Part of this testing included a live load test. This test involved driving two heavy trucks across the instrumented bridge on selected load paths. The bridge was instrumented with strain, displacement, and tilt sensors. This collected data was used to …

Relationship Between Mass And Modal Frequency Of A Concrete Girder Bridge, Michael W. Dean

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

In April of 2008, the Federal Highway Administration (FHWA) launched the Long Term Bridge Performance (LTBP) program. The program was established to collect scientific quality data from a number of bridges across the nation over a period of 20 years. The data will be used to provide a better picture of bridge health and structural performance. Utah Department of Transportation (UDOT) structure number 1F 205, located 2.4 km (1.5 mi) west of Perry, Utah, was selected as one of the LTBP pilot bridges (this bridge will also be referred to as the Cannery Street Overpass).

UDOT performs regular maintenance on …

Design Of A Micro Irrigation System For An Almond Orchard, Adam Scheuber

BioResource and Agricultural Engineering

The owners of Scheuber Farms, a 1,000 acre row crop farming operation located in Patterson, California, wish to convert a 15-acre field into an almond orchard. For irrigating the trees, they would like to use a microsprayer irrigation system. The design I recommend and describe in this paper utilizes proper hydraulic analysis, and is based on the ability to supply enough water to match the amount of water required by the orchard during the peak month of an average year.

All of the major components and parameters of the microsprayer irrigation system were designed at minimal cost while ensuring that …

From Well To Wheel: A Comprehensive Comparison Of Traditional And Alternative Vehicle-Fuel Systems, Alexander Richard Saputa

Masters Theses and Doctoral Dissertations

The objective of this project is to determine the advantages of the modern alternative fueled vehicles over traditional vehicles on a well to wheel basis. Alternative fueled vehicles are often lauded for their advantages during vehicle operation. This project evaluates vehicles according to their relative values on a broader scale. This project compares traditional, alternative fuel, and hybrid vehicles for use in the U.S. from the complete fuel cycle standpoint using points of comparison that include energy consumption, greenhouse gas emissions, and the emission of five principal pollutants. GREET software used in this study was developed at Argonne National Laboratory …

Identification And Characterization Of Polychlorinated Biphenyl Dechlorinating Microorganisms From Lake Hartwell, Sc, Tess Brothersen

All Dissertations

To date, all attempts to isolate PCB dechlorinators using traditional isolation techniques have failed. In addition, the study of PCB dechlorinating organisms has been hampered because researchers were unable to grow the organisms in sediment-free, defined media. Three microbial species capable of reductive dechlorination of polychlorinated biphenyls have been identified. These three species are from two phylogenetically distinct branches, Dehalococcoides (Bedard et al., 2007) and the DF-1/o-17 group (Wu et al., 2002a; Cutter et al., 2001). The three cultures from which polychlorinated biphenyl dechlorinators have been identified used similar strategies to 'wean' the microbes from the sediments. In this research, …

Migration Models - Comparison Of Pvc, Pet And Pla Diffusivity, Combined With A Production Cost Model For Westridge Laboratories, Shelley Cooke, Sarina Surrette

Materials Engineering

This project has two parts: [1] a migration and diffusivity model for candidate plastics used in containers, and [2] a product cost model for Westridge Laboratories (Santa Ana, CA).

Diffusion modeling is a useful tool to predict migration of polymer constituents into exposed liquids.  Polyvinyl chloride (PVC), polyethylene terephthalate (PET) and polylactic acid (PLA) were studied to estimate production costs, and component migration into water-based liquids from plastic containers.  Bis (2-ethylhexyl) phthalate (DEHP), antimony trioxide, and stannous octoate, are components of concern in the three candidate polymers, respectively.  Normal detection limits for these constituents are about 1 - 10 ppb, …

Investigation Of The Use Of Multi-Criteria Decision-Making Tools For Management Of An Urbanizing Watershed, Reed C. Colton

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

The regulation of non-point pollution sources (e.g. agricultural runoff and stormwater discharges) as mandated by the 1972 Clean Water Act, forced a fundamental paradigm shift from “end of the pipe” pollution control to a watershed management approach. Multiple jurisdictions and often conflicting objectives make it difficult to reach stakeholder consensus and execute watershed management decisions. To facilitate decision making when multiple and/or conflicting objectives exist, Multi-Criteria Decision-Making (MCDM) tools were developed for diverse applications, and potentially could be used to facilitate watershed management.

The overall objective of this thesis was to evaluate MCDM tool use to facilitate community-based management of …