Digital Commons Network^™

The Effect Of Antimony And Cobalt On The Current Efficiency And The Grain Orientation Of Deposits During The Electrolysis Of A Zinc Sulfate Solution, Samuel A. Worcester

Bachelors Theses and Reports, 1928 - 1970

Preparation of solutions and apparatus and experimental procedure was described. The effect of antimony and cobalt in a zinc sulfate electrolyte upon current efficiency with increasing time was determined by the hydrogen evolution method. The degree of preferred orientation of grains in the electrodeposits was determined by the reflection method of X-ray diffraction.

Description Of Sand-Water Pumping Experiment And Preliminary Photographic Investigation, Allen F. Westerdahl

Bachelors Theses and Reports, 1928 - 1970

The objective of this report is threefold: to provide a brief description of the Sand-Water pumping experiment; to describe the flow of sand and water in the experimental equipment; and to present the results of a preliminary photographic investigation of fluorescent minerals in clear plastic pipes.

Techniques Of Underground Sampling And Calculation Of Ore Reserves, James E. Cleveland

Bachelors Theses and Reports, 1928 - 1970

In the mining industries, samples and the technique of sampling play an important role in the life and production of a mine. From the initial prospect to the final pound of ore produced, the production depends on the grade of ore coupled with a mining system that will realize a profit, the one thing a mine cannot survive without.

Test 617: Mccormick Farmall 130 Gasoline, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT: McCORMICK FARMALL 130 GASOLINE TEST A: The manufacturer's representative operates the tractor for a minimum of 12 hours using light to heavy drawbar loads in each gear. This serves as a period for limber up, general observation and adjustments. Adjustments that are permissible include valve tappet clearance, breaker ,point gap, spark plug gaps, clutch and others of a similar nature. No new parts or accessories can be installed without having mention made of it in the report. No data' are recorded during this preliminary run except the time that the engine is operated. BELT HORSEPOWER TESTS …

Test 616: Mccormick Farmall 230 Gasoline, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT TEST A: The manufacturer's representative operates the tractor for a minimum of 12 hours using light to heavy drawbar loads in each gear. This serves as a period for limber up, general observation and adjustments. Adjustments that are permissible include valve tappet clearance, breaker ,point gap, spark plug gaps, clutch and others of a similar nature. No new parts or accessories can be installed without having mention made of it in the report. No data' are recorded during this preliminary run except the time that the engine is operated. BELT HORSEPOWER TESTS TEST B: The throttle …

Test 615: International 350 Utility Gasoline, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT TEST A: The manufacturer's representative operates the tractor for a minimum of 12 hours using light to heavy drawbar loads in each gear. This serves as a period for limber up, general observation and adjustments. Adjustments that are permissible include valve tappet clearance, breaker ,point gap, spark plug gaps, clutch and others of a similar nature. No new parts or accessories can be installed without having mention made of it in the report. No data' are recorded during this preliminary run except the time that the engine is operated. BELT HORSEPOWER TESTS TEST B: The throttle …

Temperature Forecasting At Logan, Utah, For The Snowmelt-Runoff Season, Clifton Johnson

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The purpose of this thesis is to investigate the practicability of forecasting temperatures for the spring and summer snowmelt-runoff season. A successful temperature forecast for Logan, Utah, would be useful in studies of Logan River streamflow, as well as other related applications.

Logan, Utah, is situated in a region where the snow accumulates during the winter and early spring at high altitudes and remains until the proper sequence of meteorological events provides the thermodynamic conditions essential for melting. Snow surveys provide an index to the water available on a watershed. Temperature conditions during the melt period largely determine the available …

Test 613: Case 311 Gasoline, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT: CASE 311 GASOLINE TEST A: The manufacturer's representative operates the tractor for a minimum of 12 hours using light to heavy drawbar loads in each gear. This serves as a period for limber up, general observation and adjustments. Adjustments that are permissible include valve tappet clearance, breaker ,point gap, spark plug gaps, clutch and others of a similar nature. No new parts or accessories can be installed without having mention made of it in the report. No data' are recorded during this preliminary run except the time that the engine is operated. BELT HORSEPOWER TESTS TEST …

Test 614: Case 301 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT TEST A: The manufacturer's representative operates the tractor for a minimum of 12 hours using light to heavy drawbar loads in each gear. This serves as a period for limber up, general observation and adjustments. Adjustments that are permissible include valve tappet clearance, breaker ,point gap, spark plug gaps, clutch and others of a similar nature. No new parts or accessories can be installed without having mention made of it in the report. No data' are recorded during this preliminary run except the time that the engine is operated. BELT HORSEPOWER TESTS TEST B: The throttle …

Test 610: International 350 Utility, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT TEST A: The manufacturer's representative operates the tractor for a minimum of 12 hours using light to heavy drawbar loads in each gear. This serves as a period for limber up, general observation and adjustments. Adjustments that are permissible include valve tappet clearance, breaker ,point gap, spark plug gaps, clutch and others of a similar nature. No new parts or accessories can be installed without having mention made of it in the report. No data' are recorded during this preliminary run except the time that the engine is operated. BELT HORSEPOWER TESTS TEST B: The throttle …

Test 612: Mccormick Farmall 450 Gasoline, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT TEST A: The manufacturer's representative operates the tractor for a minimum of 12 hours using light to heavy drawbar loads in each gear. This serves as a period for limber up, general observation and adjustments. Adjustments that are permissible include valve tappet clearance, breaker ,point gap, spark plug gaps, clutch and others of a similar nature. No new parts or accessories can be installed without having mention made of it in the report. No data' are recorded during this preliminary run except the time that the engine is operated. BELT HORSEPOWER TESTS TEST B: The throttle …

Test 611: Mccormick Farmall 350 Gasoline, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT TEST A: The manufacturer's representative operates the tractor for a minimum of 12 hours using light to heavy drawbar loads in each gear. This serves as a period for limber up, general observation and adjustments. Adjustments that are permissible include valve tappet clearance, breaker ,point gap, spark plug gaps, clutch and others of a similar nature. No new parts or accessories can be installed without having mention made of it in the report. No data' are recorded during this preliminary run except the time that the engine is operated. BELT HORSEPOWER TESTS TEST B: The throttle …

Test 609: Mccormick Farmall 350 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT TEST A: The manufacturer's representative operates the tractor for a minimum of 12 hours using light to heavy drawbar loads in each gear. This serves as a period for limber up, general observation and adjustments. Adjustments that are permissible include valve tappet clearance, breaker ,point gap, spark plug gaps, clutch and others of a similar nature. No new parts or accessories can be installed without having mention made of it in the report. No data' are recorded during this preliminary run except the time that the engine is operated. BELT HORSEPOWER TESTS TEST B: The throttle …

Test 608: Mccormick Farmall 450 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT TEST A: The manufacturer's representative operates the tractor for a minimum of 12 hours using light to heavy drawbar loads in each gear. This serves as a period for limber up, general observation and adjustments. Adjustments that are permissible include valve tappet clearance, breaker ,point gap, spark plug gaps, clutch and others of a similar nature. No new parts or accessories can be installed without having mention made of it in the report. No data' are recorded during this preliminary run except the time that the engine is operated. BELT HORSEPOWER TESTS TEST B: The throttle …

Test 607: Unimog 30 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT TEST A: The manufacturer's representative operates the tractor for a minimum of 12 hours using light to heavy drawbar loads in each gear. This serves as a period for limber up, general observation and adjustments. Adjustments that are permissible include valve tappet clearance, breaker ,point gap, spark plug gaps, clutch and others of a similar nature. No new parts or accessories can be installed without having mention made of it in the report. No data' are recorded during this preliminary run except the time that the engine is operated. BELT HORSEPOWER TESTS TEST B: The throttle …

A Survey Inspection Of Plain Corrugated Metal Pipe Arches And Multi-Plate Metal Pipe Arches In Kentucky, Eugene M. West

Kentucky Transportation Center Research Report

Past observations have indicated that rusting has been rather prevalent in the large, un-paved metal drainage structures most of which have been installed since the opening of the Kentucky Rural Secondary Program in 1949. Since all of these structures are relatively new, and since rusting in any form can be considered a threat to the life of a structure, the Chief Engineer's Office, in 1954, requested that a study be made to determine the over-all frequency possible causes, and individual seriousness of this condition.

Altogether, a total of 86 of these un-paved structures were inspected. Although it would have been …

A Study Of The Variation Of The Fluoride Content Of Certain Waters In The Vicinity Of Albuquerque, E. Metz Beahm

Chemical and Biological Engineering ETDs

In the first part of 1935, the City of Albuquerque was investigating the possibility of obtaining an additional water supply from the Jemez Mountains, which are about fifty miles to the north of the City. Black and Veatch, consulting engineers for the City, were asked to make a complete study of the problem. The question of fluorides in the water came up because it was known that the fluorides would cause mottled enamel in human teeth when the water was used during childhood, if the content was above 0.9 parts per million by accepted fluorine analysis methods. The question arose …

An Investigation Of The Dissolution Of Hafnium-Free Zirconium In Hydrofluoric Acid And The Effect Of Fluoride Additions, Alfred S. Neiman

Masters Theses

"Hafnium-free zirconium has assumed great importance in commercial use in recent years. When economical methods were developed in 1950 to remove hafnium from Zr, a metal was produced which not only exhibited good corrosion resistance and desirable physical properties, but also had a very low absorption cross section for thermal neutrons. Such a metal could obviously be utilized to advantage as a structural material for nuclear reactors. This application is the most important one for Zr at present.

Good corrosion resistance to most mineral acids is one of the outstanding non-nuclear properties of Zr. Hf-free Zr has good corrosion resistance …

Test 613: Case 311 Gasoline, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT:

TEST A: The manufacturer's representative operates the tractor for a minimum of 12 hours using light to heavy drawbar loads in each gear.

This serves as a period for limber up, general observation and adjustments. Adjustments that are permissible include valve tappet clearance, breaker, point gap, spark plug gaps, clutch and others of a similar nature. No new parts or accessories can be installed without having mention made of it in the report. No data' are recorded during this preliminary run except the time that the engine is operated.

BELT HORSEPOWER TESTS

TEST B: The throttle …

The Correlation Of Kelly Ball Penetration Readings With Standard Slump Cone Readings For Concrete Made From Missouri Aggregates, James Claude Rives

Masters Theses

"The ASTM standard slump test as set forth in ASTM Designation: C143-52, has been used for many years in concrete construction tor measuring the consistency of plastic concrete. Slump tests taken in the laboratory are considered reasonably accurate; however, there are numerous disadvantages in performing these tests in the field; the most serious being the time required to make a test on pavement work. The standard slump cone method is also subject to personal differences in sampling, rigidity and smoothness of base, dampening the apparatus, filling the cone, rodding, raising the cone, freedom from jarring and selection of point to …

Influence Of Some Metals On The Rate Of Corrosion And Deposition Of Titanium In Molten Salt Baths, Yu-Pu Huang

Masters Theses

"2. The purpose of this investigation. The substances obtained by corrosion of titanium in fused salts, if leached with water and dried, are composed of three kinds of products, namely of black, gray and yellowish ones. The black product was identified by X-ray diffraction as titanium-oxygen alloy with 9-10% by weight oxygen which later was used as coating material instead of the titanium sheet for deposition experiments described previously. The yellowish product was identified as rutile. The grayish product was also rutile but containing some titanium powder. Of these three products only the black one possessed the ability to deposit …

Temperature Stabilized Transistor Direct Current Amplifier, William Lewis Metcalf Jr.

Masters Theses

"A stable direct current transistor amplifier is difficult to design for use at elevated temperatures. The above is true since transistor parameters and bias conditions are affected by temperature. When transistors are incorporated in direct coupled amplifier circuits, these variations in parameters and bias conditions usually result in unstable operation. It is the purpose of this thesis to investigate this problem and to design a stable direct current transistor amplifier which will operate satisfactorily at elevated temperatures.

This problem is of importance as such direct current amplifier circuits are found in airborne or missile servo systems. In such systems the …

Statistical Analysis Of X-40 (Stellite-31) Production Blends., Edward P. Patterson

Masters Theses

"An investigation was undertaken to statistically analyze the data obtained on X-40 (Stellite 31) production blends which were tested to the requirements of AMS 5382. For our purpose a blend is one or more furnace heats, the shot of which has been thoroughly mixed to produce greater uniformity of product. The mixed shot is charged to the arc furnaces and cast into parts, and test specimens. A great range of test results have been obtained in testing blends, and it was felt that a statistical analysis of a few of the variables might yield information which could be applied toward …

Determination Of Lattice Constants, And Thermal Expansion Coefficients Of Ti₂O₃ And Of Its Solid Solutions With Ti, Tatsuhiko Ejima

Masters Theses

"For the determination of the precise lattice constants of Ti₂O₃, it is very important to use a Ti₂O₃ as pure as possible.

Due to the formation of solid solution with titanium or oxygen, ranging from 32.5 to. 34.5% O₂ by weight in the Ti-O binary system, it is very difficult to get a pure Ti₂O₃ (33.8% O₂ by weight) in the laboratory.

To determine the precise lattice constants of pure Ti₂O₃, therefore, the extrapolation method was used.

This method computes the respective constants for pure Ti₂O₃ from the values obtained With Ti₂O₃-Ti solid solutions by extrapolation. To carry out such …

Investigation Of Length Changes In Prestressed Concrete Slabs With Outside Exposures, John Best

Masters Theses

"In general, pavements may be classed as being either rigid or flexible. The term “rigid pavement”, as commonly used in the United States, is applied only to wearing surfaces constructed of portland-cement concrete. All other types of pavements are classed as “flexible”. A pavement constructed of portland-cement concrete is assumed to possess considerable flexural strength which will permit it to act as a beam and allow it to bridge any minor irregularities which may occur in the base on which it rests, hence the term “rigid”….

In view of the experience and information gathered in over 50 years of road …

Physical Properties Of Concrete At Early Ages, Curtis E. Weddle Jr.

Masters Theses

"The introduction of the motor vehicle and the subsequent rapid expansion of the highway systems of the United States have brought with them many problems.

The Civil Engineer, in his attempts to provide adequate safe avenues of travel for the populace, has been faced with many problems. Handicapped by the need for speed in design and lack of information of the trends in motor vehicle design, the engineer has been forced at times to utilize design methods inconsistent with good engineering practices.

Of the many types of pavement sections which have been designed in an effort to provide structurally and …

Investigation Of Length Changes And Warping In Thin Prestressed Pavements, Wilbur D. Stites

Masters Theses

"The present growth of the American highway system presents a staggering problem to the highway designer. The increased and urgent demand for more highways, capable of accommodating traffic loads that are constantly increasing, combined with the increased construction cost of highways, behooves the present day highway designer to envision future highway problems that will arise. These future problems are numerous and complex; however, it seems the primary problem is the selection of a surfacing material that will withstand projected traffic loads with a maximum economy of construction and future maintenance costs. Concrete at the present time is the most satisfactory …

Creep Characteristics Of Thin Prestressed Concrete Slabs, Wayne F. Alch

Masters Theses

"Prestressed concrete as a structural material is finding wider usage in the United States today. Until recently, economic factors have precluded the use of prestressed concrete in this country, while Europe became the leader in discovering new uses and applications in construction for the material. As new methods are developed in this country, more engineers and contractors are discovering that prestressed concrete is, in many ways, far superior to plain or reinforced concrete. In line with this awakening the Missouri Highway Department is carrying on research to determine the feasibility of prestressed concrete for highway slabs. This study is a …

The Magnitude And Directions Of Strains And Stresses In Edge Loaded Concrete Slabs, William M. Baldwin

Masters Theses

"The concrete industry in the United States represents one of the fastest growing segments of the national economy. Many reasons for this may be given, among which are, the durability of concrete structures, the local availability of a large portion of the materials used in concrete, and its wide range of adaptability to the designs of engineers and architects.

One of the most recent changes in concrete usage is the change from reinforced concrete to prestressed concrete. The term prestressed as used herein refers to any type of reinforced concrete in which the reinforcing material has a stress prior to …

Physical Properties Of Concrete At Early Ages, Karl H. Dunn

Masters Theses

"There are well over 100,000 miles of concrete pavements existing today on our United States highway system. The development of these pavements during the first half of this century has been a process of learning from construction applications and mistakes. However, the unexpected increase in traffic load has brought highway designers to experiment with relatively new types and designs of concrete pavement construction.

Some designers, in an effort to reduce temperature warping stresses, have used short slabs 10 to 15 feet in length, generally unreinforced. Another type of construction is the definitely jointed slabs, the slabs being from 20 to …