Digital Commons Network^™

The Application Of Statistical Estimation Techniques To Terrain Modeling, Donald P. Duckett Jr.

Theses and Dissertations

This thesis researches methods of generating accurate and realistic polygonal terrain models by reducing gridded sampled terrain elevation data such as DMA DTED. The terrain models generated should be applicable for use in flight simulators and other systems. Existing methods of terrain modeling are discussed, and limitations of these systems are presented. The geostatistical estimation technique known as kriging is presented as a method estimating terrain elevations at locations not provided in DMA DTED or other gridded terrain elevation data. Kriging is an optimal interpolation method based on statistical analysis of the data. It also provides a measure of accuracy, …

A Dynamic Computer Graphics Model Of Satellite Orbits For Use In Instruction And Analysis, John P. Anton

Theses and Dissertations

A computer model of satellite orbits was developed to illustrate difficult orbital concepts. It was also designed to analyze the positions of a satellite constellation with respect to locations on the earth as an aid to analysts. A literature review revealed that existing methods relay on drawings, expensive computers, or are satellite system specific, but that it would be possible to develop such a tool for an IMB-compatible personal computer using the Pascal language. Model capabilities selected included (1) a menu driven user interface; (2) a screen display showing satellite locations, ground track, and an earth map in one of …

A Formal Definition Of The Object-Oriented Paradigm For Requirements Analysis, Andrew D. Boyd

Theses and Dissertations

This paper develops a formal definition of the Object-Oriented paradigm for requirements analysis. The literature was surveyed for both formal and informal methods for conducting an Object-Oriented Requirements Analysis (OORA). The informal methods reviewed are: Bailin's, Shlaer and Mellor's, Booch's, and Coad and Yourdon's. The formal methods reviewed are: Bralick's, Z, and REFINE. None of the methods were found to be adequate for doing an OORA. A formal definition of an OORA, based on the concept of classes, is developed. The definition itself is presented as set and relation theory. A supporting graphical representation is also developed and presented. The …

Design Optimization Of Laminated Fiber Composites, Ramarao G. Prasad

Theses

Laminated Fiber Composites are finding a wide range of applications in structural design especially for light weight structures that have stringent stiffness and strength requirements Finding an efficient composite structural design that meets the requirements of a certain application can be achieved not only by sizing the cross-sectional areas and member thicknesses but also by global or local tailoring of the material properties through selective use of orientation, number and stacking sequence of the laminae that make up the composite laminate.

The work presented here treats the design optimization problem involving minimum weight design of fiber composite laminates subject to …

The Calendar - October 1991, Nova University

The Calendar

No abstract provided.

Instrumentation And Control For A Microprocessor-Based Coronary Perfusion System, Daniel L. Priester

Master's Theses (1922-2009) Access restricted to Marquette Campus

No abstract provided.

Domain Limitations And Interface Requirements For Expert Developed Knowledge Based Systems, Bernard Lee Lewis

Engineering Management & Systems Engineering Theses & Dissertations

The expanded use of graphical, case-based and object oriented techniques in expert systems creation has made it more practical for domain experts to develop their own applications. This thesis focuses on the elements necessary in an expert/developer interface and looks at various forms and techniques that exemplify such an approach. The spreadsheet metaphor is used for an interface or managed set of interfaces that a domain expert can use in building his own expert system or prototype. criteria are established for such interfaces and recent commercial offerings that make expert-created knowledge-bases more practical are reviewed for techniques that qualify. Approaches …

Deconvolution Applications In Arterial Dynamics, Shanthi Ganesan

Theses

This thesis deals with the computation of the Arterial Impulse Response Function by deconvolving aortic pressure and flow signals in time domain. Several methods have been developed in the past to obtain a solution for the convolution integral. These are (1) Transform method, and (2) Numerical Approximation methods : a. Conventional method b. Relaxation methods.

These methods have been applied in the past to the RC network model and it was found to work well. In this thesis, the methods are applied to data from more realistic models and also on data obtained from dogs. The model considered is a …

Bio-Mechanics Of The Hip Joint And The Engineering Considerations In The Treatment Of Unstable Intertrochanteric Fractures, Manoj D. Nene

Theses

Numerous previous attempts have been made to determine the magnitude and the direction of forces acting on the hip joint. The mechanism of femoral neck fractures and the frequently occurring failure of its internal fixation has led engineers to analyze the forces involved. An unstable intertrochanteric fracture is one which lacks continuity of the bone cortex on the opposing surfaces of the proximal and digital fragments. A mathematical model is created in this study to examine the 135° and 150° nail plate. The results give an approximate estimation of stresses on the two plates. A 3D finite element model of …

Industrial Wastewater Management Practices In Air Force Logistics Command, Patrick J. Smith

Theses and Dissertations

The selection of a model plant was based upon criteria established by a review of current literature. The criteria were permit compliance, plant performance, and the adoption of pollution prevention as a corporate environmental philosophy. In this study, private sector firms were examined to identify the best industrial wastewater management practices using a Total Quality Management (TQM) tool called benchmarking. The data gathering process consisted a survey of water pollution control organizations, and a survey of benchmark candidates. The purpose of surveying water pollution control organizations was to objectively identify possible benchmark candidates. A questionnaire was then used to gather …

A Biomechanical Analysis Of Three Humeral Fracture Fixation Systems, Alina Michelle Waite

Theses

Often, humeral fractures requiring internal fixation can be a challenging orthopaedic procedure. Each method of treatment possesses clinical and biomechanical advantages and disadvantages. Rigid plate fixation is highly successful in treating a large variety of long bone fractures. Nevertheless, excessive soft tissue dissection is necessary, and vascular and neural anatomy of the humerus can make plate application and removal difficult. An intramedullary nail offers a relatively simple procedure, thereby reducing these anatomical concerns. However, rotational instability at the fracture site is a common complication with a conventional intramedullary nail. Thus, a study was conducted to evaluate a new interlocking intramedullary …

An Approach To Improving The Antithrombogenesis Of Pneumatic Diaphragm Artificial Ventricle : Fabrication And Design Considerations, Hui-Sun Wang

Theses

Thrombus formation is one of the major problems in artificial heart development and its clinical applications. In order to improve the antithrombogenesis in the artificial ventricles, three aspects of investigation have been done in the laboratory.

1] the surface features and the surface defects on specially prepared samples made of polyurethane and silicon rubber were studied and analyzed by scanning electron microscopy ( SEM ), light microscopy and KEVEX Feature Analysis for understanding and controlling the blood contacting surface.

2] the polyurethane blood contacting surface with smooth surface fabricated by solution cast process, the material treatment, and the fabrication procedure …

Composition And Method For Radiation Synovectomy Of Arthritic Joints, D. E. Day, Gary J. Ehrhardt

Materials Science and Engineering Faculty Research & Creative Works

A method for preparing nonradioactive microspheres adapted for radiation synovectomy of arthritic joints in a mammal involves forming the microspheres by doping a biodegradable glass material which may be lithium or potassium silicate, lithium or potassium aluminosilicate, lithium or potassium aluminoborate, lithium or potassium germanate or lithium or potassium alumino- germanate with an isotope which may be samarium, holmium, erbium, dysprosium, rhemium or yttrium so that the isotope is chemcially dissolved in and distributed uniformly throughout the glass material. The doped glass material is then treated with an acid wash to produce a thin layer on the surface thereof and …

Evaluation Of Headwalls And Outlets For Geocomposite Edge Drains On I-75 And I-71, L. John Fleckenstein, David L. Allen, Jack A. Harison

Kentucky Transportation Center Research Report

Longitudinal, round, perforated pipe edge drains have been used along Kentucky roadways for approximately two decades. Panel (fin) edge drains were first used in Kentucky in 1984. Most of these edge drains were installed on the Interstate and Parkway systems.

Several problems related to the drains have been noted in the last seven years. A number of these problems have been observed to be related to flexible outlet pipes and headwalls.

A recent study was initiated to evaluate headwalls and outlets on I-75 from Lexington, Kentucky to Cincinnati, Ohio (approximately 70 miles) and on I-71 from Louisville, Kentucky to I-75 …

Impulse, Carrie Sword, Carey Crouse, Ross Berndt, Steve Poessnecker

Impulse (Jerome J. Lohr College of Engineering Publication)

Features:
[Page 2] Water research: Saving for a 'dry day'
[Page 4] Regional water center enjoys benefits of Brookings
[Page 5] Feed Jake'
[Page 6] SDSU honors distinguished engineers
[Page 8] Scholarships awarded at annual banquet
[Page 10] New South Dakota businesses proposed by SDSU students

Departments:
Faculty:
[Page 11] Transportation technology service receives funding
[Page 11] Wayne Knabach honored
[Page 12] Faculty and students attendance at Dalton.
[Page 12] Conference focuses on women, minorities
[Page 13] Professors receive doctorates
[Page 13] Fulbright Scholar
[Page 14] Two retire from College of Engineering faculty
[Page 14] Former dean of engineering dies …

1-Nitronaphthalene Causes Ultrastructural Changes Primarily In Nonciliated Bronchiolar Epithelium Followed By Ciliated Epithelium In The Rat, John-Michael Sauer

Masters Theses

This study describes morphological changes in the lung at several time intervals following a single injection of 1-Nitronaphthalene (100 mg/kg intraperitoneal) in male Sprague-Dawley rats using transmission and scanning electron microscopy. Dilation of the smooth endoplasmic reticulum and mitochondrial distension in the nonciliated bronchiolar (Clara) cells was apparent as early as 1 hour after injection, while adjacent ciliated cell showed minimal changes. At 6 hours, when respiratory distress was apparent in the animals, Clara and ciliated cells exhibited chromatin clumping, loss of mitochondrial cristae and cytoplasmic vacuolization. Also at 6 hours, the interstitial area around the terminal bronchioles was infiltrated …

A Vision System Model, Erik J. Fretheim

Theses and Dissertations

This dissertation provides four major contributions to the field of vision research. The first contribution is a general vision system model. The model, which blends biological as well as technological methods into a coherent approach to vision, will provide a basis for implementing vision systems. The second contribution of this dissertation is to demonstrate particular implementations of portions of the model. These implementations will include methods for using Gabor wavelets in edge detection, in preprocessing images for use as feature vectors in backpropagation neural networks, and as basis functions in a recognition/reconstruction network, as well as methods for integrating color …

Mathematical Modeling Of Mass Transfer In Microvascular Wall And Interstitial Space, Daekyung Kim

Dissertations

The dynamics of macromolecular transport across the microvascular wall and into the adjoining interstitial space was studied in the hamster cheek pouch using intravital fluorescence microscopy in combination with digital image processing. Fluorescein isothiocyanate-labe led dextrans (FITC-Dx) of 70,000 and 150,000 daltons were used as tracers. In each experiment, the time-dependent extravasation of FITC-Dx from a leakage site in a blood vessel was videotaped for about 2 hours. The macromolecular transport from individual microvessels was quantified by digital video-image processing. Histograms of the light intensity distributions for selected fields at various times were obtained and then converted to the interstitial …

Off-Line Programming Using Igrip, Narahari K. Bhandary

Theses

AT&T's FWS-200 (Flexible Work Station) has been modeled and simulated to implement Off-Line Programming (OLP). IGRIP (Interactive Graphics Robot Instruction Program) from Deneb Robotics, Inc. has been used to simulate the FWS operation.

A GSL(Graphics Simulation Language) program has been used to simulate the chip placements during PCB assembly. The program leads the user through the motions of chip placement, and after the simulation run downloads the motion sequence to the FWS. The animation sequences of the FWS have been downloaded to the FWS on the Factory Floor using a C program, which is utilized to communicate the data to …

Implementation Of Automated Assembly, Kang H. Kong

Theses

Research has shown that about 60 - 80% wealth producing activities is related to manufacturing in major industrial countries.

Increased competition in industry has resulted in a greater emphasis on using automation to improve productivity and quality and also to reduce cost.

Most of the manufacturing works such as machining, painting, storage, retrieval, inspection and transportation have changed to automation successfully, except assembly. Manual assembly is predominant over automatic assembly techniques due to inherent assembly problem and the fact that the assembly machines lack the innate intelligence of human operator and lack sufficient flexibility to changeover when product designs and …

The Application Of Adaptive Step-Size Control In The Numerical Simulation Of Calcium Release In Vascular Smooth Muscle, Michael John Sydor

Theses

An algorithm for the adaptive control of numerical integration step-size is developed and implemented for the simulation of a three compartment model for Vascular Smooth Muscle. The three compartment model accounts for the simultaneous diffusion of Ca, ⁴⁵Ca, EGTA, Ca-EGTA, and ⁴⁵Ca-EGTA, and is an extension of a two compartment model by Diecke for the simultaneous diffusion of Ca, EGTA, and Ca-EGTA. The addition of the third compartment is to account for the presence of the Sarcoplasmic Reticulum which stores the calcium needed for contraction and is the primary regulator of calcium in the VSM cell. The SR …

The Design And Testing Of A Personal Computer Controlled Scanning Acoustic Microscope For Orthopaedic Surgical Applications, Hubert Heinrich Berndt

Theses

This thesis describes scanning acoustic microscopy and ultrasonic image processing to characterize and evaluate materials of known properties, as well as novel materials. This work describes the assembly and testing of a PC based device for nondestructive evaluation of bone materials for usage in orthopaedics research. It includes the identification of some hardware problems and their solution, and it also describes different image processing techniques that have been developed and applied in this work. In a growing number of disciplines it has been discovered that an acoustic microscope can provide new information, especially about the elastic properties of specimens and …

Direct Recovering Of Composite Surface Using Uoff, Zhesheng Huang

Theses

The research work reported in the thesis is motivated by the problem raised in the computer vision area. It utilizes direct method to recover surface structure of objects in 3-D space from a pair of stereo images. The direct method, compared with optical flow-based approach and feature-based approach, is robust and computationally efficient. However it can only recover planar surface structure so far. A new approach to recover structure from a pair of stereo images based on unified optical flow field (UOFF) is developed recently. It can recover curved surface structure.

In this thesis, the problem of recovering surface structure …

Expert System For Blown Film Extrusion, Jiachyi Li

Theses

Expert systems and blown film extrusion are two subjects to deal with in this thesis. Expert systems are an aspect of artificial intelligence, or a computer's ability to think. The determination of a suitable expert system for particular problem is an important factor in current societies. Blown film is extruded as a continuous tube which is air cooled, collapsed, and wound onto a roll as a double layer of film. Such film, if heat sealed and perforated, makes a roll of bags. There are many factors that affect blown film extrusion. Therefore, using expert system to evaluate blown film extrusion …

Image Enhancement And Analysis Of Leukocyte Adhesion, Yee-Ruh Lin

Theses

The image of leukocyte adhesion to microvascular walls in the isolated rat perfused heart model has been observed and processed. Some of the fluorescent labeled leukocytes are barely visible due to microscope focal plane and the motion of objects. The purpose of this thesis is to extract leukocyte from the image of the experimental data using image enhancement and analysis (segmentation) techniques and develop a program to handle automatically counting of leukocytes in a predefined scene.

A Process For Implementing Cim In A Small Manufacturing Facility, Tushar R. Desai

Theses

This work is dedicated to small manufacturing enterprises seeking to explore Computer Integrated Manufacturing (CIM) technology, which is the recent trend in the manufacturing world. The main theme of this thesis is to improve productivity, product quality and reliability, and to reduce costs by integrating various discipline in small manufacturing environment, using computer technology.

To achieve this goal, a hypothetical small manufacturing company was chosen as a subject. The typical functional and organizational structures were analyzed and possible problem areas were highlighted. The problems relating to manufacturing process were studied in detail, and possible solutions were proposed to computerize the …

Wright State University College Of Engineering And Computer Science Bits And Pcs Newsletter, May 1991, College Of Engineering And Computer Science, Wright State University

BITs and PCs Newsletter

A six page newsletter created by the Wright State University College of Engineering and Computer Science that addresses the current affairs of the college.

Evaluation Of Highway Geometrics Related To Large Trucks, Kenneth R. Agent, Jerry G. Pigman

Kentucky Transportation Center Research Report

One objective of this study was to determine the extent of highway safety and geometric problems associated with larger trucks using Kentucky's highways. The accident analysis involved both a general analysis of all truck accidents statewide as well as the identification of specific high-accident locations. A second objective was to identify criteria which can be used in identifying roadway sections that cannot safely accommodate large trucks.

The accident analysis given can be used to investigate locations which have a high number of truck accidents. The general accident statistics related to trucks can be used in the investigation of the high-accident …

Effects Of Alternative Sprinkler Irrigation Parameters On Pesticide Movement, Ahmad Yar Ranjha, Richard C. Peralta, Robert W. Hill, Antonio Maria Requena, Howard M. Deer, Majid Ehteshami

Civil and Environmental Engineering Faculty Publications

The relative reduction in potential ground-water contamination due to pesticides at several sites in Utah was determined by comparing alternative irrigation system designs, water management practices and pesticides. Alternative sprinkler irrigation distribution coefficients were used to estimate infiltration depths. The movement of pesticides through soils following sprinkler irrigations was simulated with one-dimensional model. Pesticide contamination of ground water can be reduced by careful selection of pesticides, properly designed irrigation systems and improved water management techniques. Procedures for selecting an appropriate sprinkler design and pesticide are presented.

Composition And Method For Radiation Synovectomy Of Arthritic Joints, D. E. Day, Gary J. Ehrhardt

Materials Science and Engineering Faculty Research & Creative Works

Radioactive microspheres for radiation synovectomy of arthritic joints in a mammal comprises a biodegradable glass material and a beta radiation emitting radioisotope chemically dissolved in and distributed substantially uniformly throughout the glass material. The biodegradable glass material may be lithium silicate, lithium aluminosilicate, lithium aluminoborate, lithium germa- nate, lithium aluminogermanate, potassium silicate, potassium aluminosilicate, potassium aluminoborate, potassium germanate or potassium aluminogermanate and the beta radiation emitting radioisotope may be samarium-153, holmium-166, erbium-169, dysprosium-165, rhenium-186, rhenium-188 or yttrium-90. Method for preparing such microspheres and for carrying out radiation synovectomy of arthritic joints utilizing such microspheres are also disclosed.