Digital Commons Network^™

Influence Of Agrochemical Mixtures On Nitrogen Transformations In Floating Treatment Wetlands, Matthew Russell

Theses and Dissertations--Biosystems and Agricultural Engineering

Controlling losses of nitrate-N from agricultural fields to ground and surface water environments is one of the most pressing water resources problems today. Increasing levels of nitrate-N pollution in surface and groundwater is a critical threat to human and environmental health across the globe. To mediate nitrate-N losses, natural and constructed wetlands have been increasingly used as nutrient mitigation technologies and strategies. The use of wetlands as a treatment approach for nitrogen in runoff is a common practice in agroecosystems, however, nitrate-N is not the sole constituent present in agricultural runoff, and other biologically active contaminants have the potential to …

Development Of A Cultivation System For Producing Pure Mycelium Materials From Distillers' Spent Grains, Keya Rani Roy

Theses and Dissertations--Biosystems and Agricultural Engineering

Stillage is a byproduct of distilleries which is rich in organic matter, minerals, and acidic components. It is commonly used as animal feed and has high potential for use as an alternative substrate for microorganisms. Filamentous fungi are saprophytes that can utilize stillage solids to grow as threadlike mycelium. The structure and composition of the filamentous mycelium has shown promise to produce pure mycelium materials (PMM), which might have many potential applications, for instance as a leather-like material or alternative protein food ingredient. Basidiomycota fungi (including true mushrooms) species are presently used in industry to produce PMM due to the …

Fabricating Silver-Ceria Polymer Nanocomposite Scaffolds For Biomedical Therapeutic Applications, Shreya S. Pawar

Honors Undergraduate Theses

Improper healing of bone fractures and limited regeneration of bone following bone tumor resection remain a prevalent complication worldwide. Long-term effects of this include joint instability, limited movement, and arthritis. Bone infections (osteomyelitis), reactive oxygen species (ROS) generation via excessive inflammation, and underlying conditions such as osteoporosis can contribute to suboptimal bone tissue regeneration. ROS accumulation stimulates osteoblast apoptosis, while promoting osteoclast differentiation. These processes inhibit mineralization and osteogenesis. Conventional therapeutics involve the utilization of drugs and bone grafts. However, these approaches pose limitations and can result in subsequent complications. Microbial infections, ROS accumulation, and excessive inflammations are factors that …

Facial Chick Sexing: An Automated Chick Sexing System From Chick Facial Image, Marta Veganzones Rodriguez, Thinh Phan, Arthur F.A. Fernandes, Vivian Breen, Jesus Arango, Michael T. Kidd, Ngan Le

Computer Science and Computer Engineering Faculty Publications and Presentations

Chick sexing, the process of determining the gender of day-old chicks, is a critical task in the poultry industry due to the distinct roles that each gender plays in production. While effective traditional methods achieve high accuracy, color, and wing feather sexing is exclusive to specific breeds, and vent sexing is invasive and requires trained experts. To address these challenges, we propose a novel approach inspired by facial gender classification techniques in humans: facial chick sexing. This new method does not require expert knowledge and aims to reduce training time while enhancing animal welfare by minimizing chick manipulation. We develop …

Deep Learning For Computer Vision Applications In Medical Diagnostics And Wildlife Monitoring, Mostapha Al Saidi

Electronic Theses and Dissertations 2020 - Present

This dissertation explores innovative applications of deep learning and computer vision techniques across three distinct domains: medical imaging, dermatological diagnostics, and wildlife monitoring. The research addresses critical challenges in each field through the development and optimization of convolutional neural networks and other deep learning architectures.

The first study examines COVID-19 classification from X-ray images, comparing one-shot versus two-stage classification approaches using transfer learning with pre-trained models such as VGG16 and VGG19. The initial hypothesis was that breaking down the classification task into two optimized tasks would yield better results than one-shot classification. Results demonstrated that the single-stage approach achieved superior …

The Effect Of Huntington’S Disease On The Mechanical And Electrical Properties Of Red Blood Cells, Liliana Ponkratova

Electronic Theses and Dissertations 2020 - Present

Huntington’s disease (HD) has an impact on brain tissues and can alter the biochemical properties of the peripheral blood. Evidence in existing literature suggests that peripheral mutant Huntingtin protein may be involved and deteriorate HD. Red blood cells (RBCs), being the most abundant type of cells in the peripheral blood, can show detectable changes in their biophysical properties due to subtle changes in cell membranes. These changes can offer a minimally invasive means to track the progression of the disease. The transgenic line R6/2 is used as the disease model. Utilizing the electro-deformation spectroscopy, we measured membrane permittivity, cytoplasm conductivity, …

Unwritten Rules And Oral Transmission In Architectural Proportion Systems: Case Study Of Bubungan Tinggi House, Huzairin. Muhammad Deddy, Dila Nadya Andini, Rudi Hartono, Anna Oktaviana, Dahliani Dahliani

ASEAN Journal on Science and Technology for Development

The proportional systems in vernacular architecture often exist without formal written codification, raising questions about their transmission across generations. Bubungan Tinggi House which is a replica of the Banjar Kingdom palace was built by Banjarese merchants and aristocrats from the 16th to the 19th centuries, showing a uniform aesthetic quality, which indicates a regularity in the proportions of its form. However, no historical written manuals detailing these proportions are known to exist. To prove the existence of regularity in the Bubungan Tinggi House proportion system, research was conducted by taking 7 Bubungan Tinggi House samples spread across South Kalimantan province, …

Artificial Intelligence To Transform Lifelong Learning And Workforce Development In Southeast Asia: A Call To Action, Shyh Poh Teo, Khadizah H. Abdul-Mumin

ASEAN Journal on Science and Technology for Development

No abstract for this article type.

Dynamically Scaling Biomimetic Robots Through Parallel Viscoelastic Actuators, Foster Olaf Holmquist

Graduate Theses, Dissertations, and Problem Reports (ETD)

Robots provide a unique proving ground for testing scientists’ understanding of neuromuscular systems. Synergistically, mimicking biological control laws and mechanics could offer robotics the robust and adaptive locomotion of animals. Previous work has utilized the wealth of research on insect biomechanics to develop scaled robotic models but doing so presented a problem: while these robots’ larger scale has simplified manufacturing, the scale has also shifted its mechanics from those of the modeled organisms. While animals walk, forces are generated that describe their mechanics and influence motor control. The musculoskeletal structure and stretch of muscles result in viscous and elastic forces, …

Assessment Of The Feasibility Of Utilizing Plastic Waste In Infrastructure To Promote Circular Economy In Bangladesh, Md Lutfor Rahman

Civil Engineering Dissertations - Archive

This study presents a comprehensive assessment of municipal solid waste (MSW) and plastic waste characterization across Bangladesh, with a focus on circular economy opportunities and the long-term economic viability of plastic road. Using on-site waste characterization data for 13 major cities from four geographic zones of Bangladesh —Northwest, Northeast, Southwest, and Southeast—the research identifies food waste as the dominant component of the national waste stream (67.3%), followed by plastic (12.4%), textiles (7.8%), and paper (4.7%). Among plastics, low-density polyethylene (LDPE) overwhelmingly dominates (89.7%), highlighting the continued prevalence of single-use flexible plastics.

A life cycle cost analysis (LCCA) was conducted comparing …

Implementation And Performance Evaluation Of Plastic Road Mix Design In Parking Lot, Ishraq Faruk

Civil Engineering Dissertations - Archive

The uncontrolled proliferation of plastic waste has emerged as a global environmental crisis, with high-density polyethylene (HDPE) constituting a substantial fraction of the waste stream due to its extensive use in packaging and its resistance to degradation. In parallel, asphalt pavements particularly in urban infrastructure such as parking lots experience accelerated deterioration from raveling, rutting, and cracking as a result of thermal cycling, repetitive loading, and inadequate drainage. These converging challenges present an opportunity for innovative, circular-economy-based sustainable pavement technologies that simultaneously improve surface durability and mitigate plastic waste accumulation.

This research investigates the full-scale implementation and monitoring of HDPE …

Life Cycle Assessment Of Renewable Hydrocarbon Fuels Produced By The New Cool Gas To Liquid (Cool Gtl) Process, Elochukwu Okoye

Dissertations, Master's Theses and Master's Reports

The Cool Gas-to-Liquid (Cool GTL) process converts biogas and captured CO₂ into renewable hydrocarbon fuels, contributing to GHG emissions reduction in transportation. This report explains a Life Cycle Assessment (LCA) study that was completed to evaluate the environmental impact of different feedstocks, hydrogen sources, and electricity inputs. The analysis considers biogas from food waste, manure, and landfill sources, as well as biogenic, fossil, and direct air capture (DAC) CO₂ feedstocks. Results show that biogas pathways provide the greatest GHG reductions, with the best case (food and manure biogas + solar hydrogen + solar electricity) achieving a net-negative GWP …

Microbial Inactivation And Spray Drying For The Recovery Of Single-Cell Protein From Chemically Deconstructed Polyethylene Terephthalate, Reeba Elizabeth Reji

Dissertations, Master's Theses and Master's Reports

Polyethylene terephthalate (PET) is one of the most widely used polymers in plastics packaging. However, the increasing demand for PET has created challenges in waste disposal. Previous research has shown that PET can be deconstructed using ammonium hydroxide (CDPET). Microorganisms capable of utilizing the product as a sole carbon source can be converted to single-cell protein (SCP). A custom microbial inactivation unit was developed to ensure the safety and stability of generated SCP. Our study evaluated the effect of exposure time (45–60 minutes) at 140 °C with the goal of maximizing microbial inactivation. Our findings suggest that microbial inactivation can …

Direct Methane Capture Via Aerobic Methanotrophs, Waaseyaaban Landgren

Dissertations, Master's Theses and Master's Reports

Methane, a greenhouse gas with global warming potential 80 times greater than carbon dioxide, heavily contributes to global warming. Removing 1 Gt of atmospheric methane by 2050 would limit global temperature increase from reaching 1.5°C. Currently, biotrickling filter systems for removing atmospheric methane via methanotrophs exist, but not for very low methane concentrations (< 1 v%). Current research work at the University of Washington isolated and engineered a microbe strain which thrives at 500 ppmv methane, solving one obstacle in making this technology feasible. In this thesis, techno-economic analysis and environmental life cycle assessment conducted on this process have assessed its economic feasibility, greenhouse gas reduction potential, and possible areas of improvement. Study results show that at 500 ppmv methane, this process could remove atmospheric methane at a cost of $3,992-5,224 per tCH₄. The ideal case also produces annual net reduction in warming potential by 276-311 tCO₂e per process unit deployed.

Development Of Supervised Machine Learning-Based Life-Cycle Cost Estimation And Prediction Models For Comparative Sewer System Rehabilitation Using Open-Cut And Trenchless Cured-In-Place Pipe Methods, Gayatri R. Thakre

Civil Engineering Dissertations - Archive

Aging wastewater infrastructure in the United States demands renewal strategies that balance cost-effectiveness, sustainability, and minimal social disruption. Conventional open-cut pipeline installation (OCPI) involves extensive excavation and restoration, whereas trenchless alternatives such as Cured-in-Place Pipe (CIPP) Renewal Technology offer reduced surface disturbance and environmental impacts. However, existing studies primarily focus on Construction Costs (CC), neglecting integrated life-cycle evaluations that also account for Environmental Costs (EC) and Social Costs (SC).

The primary objectives of this research are to develop supervised machine-learning (ML) models to estimate and predict CC in 2025 US dollars (USD) per linear foot of OCPI and CIPP Renewal …

Optimization, Machine Learning, And Networking Solutions For Cyber-Physical Systems, Xu Tao

Theses and Dissertations--Computer Science

Cyber-Physical Systems (CPS) represent a transformative paradigm that integrates sensing, computation, and actuation through networked systems to enable intelligent, context-aware applications across various domains. Despite their growing potential, CPS still face critical challenges, particularly in maintaining reliable, low-latency communication and efficient data processing in resource-constrained and dynamic environments. These challenges are further magnified in rural or remote deployments, where traditional network infrastructure is often unavailable or unreliable. This dissertation addresses these challenges through the development of optimization and inference algorithms that enhance network performance in Software-Defined Networks (SDN), using techniques such as reinforcement learning and network tomography for efficient routing. …

Photocatalytic Performance Of Ba₀.₈Ca₀.₂Tio₃ Composite For Norfloxacin Removal In Aqueous Solutions, Raj Mohanty, Swayam Aryam Behera, Asima Subhadarshini, Binita Nanda, P. Ganga Raju Achary

Journal of Metals, Materials and Minerals

This study investigates the degradation of norfloxacin using a Ba0.8Ca0.2TiO3 (BCTO) perovskite composite synthesized via a simple solid-state method. Variety of characterization techniques, including photoluminescence spectra, powder X-Ray Diffraction, UV-Vis Diffuse Reflectance Spectra, FE-SEM and Fourier-Transform Infrared spectra confirm the structural and optical properties of BCTO. Electrical characterization further elucidates its conductive properties. The BCTO composite demonstrates an impressive 87% degradation rate of norfloxacin, attributed to its reduced electron-hole recombination, enhanced light harvestation, and improved charge carrier mobility. Kinetic studies indicate that the degradation process adheres to a pseudo-first-order model, with BCTO outperforming both pure BaTiO3 and conventional photocatalysts. These …

Upcycled Waste-Derived Triboelectric Nanogenerator For Sustainable Energy Harvesting, Archana Panda, Basanta Kumar Panigrahi, Subhendu Pati, Sunit Gourav Mohanty, Kushal Ruthvik Kaja

Journal of Metals, Materials and Minerals

The proliferation of disposable paper-based materials in laboratories has raised significant environmental concerns due to their rapid discard and accumulation. This study explores the upcycling of commonly discarded laboratory waste, specifically butter paper and polyurethane (PU) foam, into a single-electrode triboelectric nanogenerator (TENG) for mechanical energy harvesting. The fabricated device employs butter paper as the positive triboelectric layer and PU foam as the negative layer, with an aluminium tape electrode. Electrical tests reveal a peak voltage of 21 V and current of 47 nA, reaching a maximum power of 438 nW at 500 MΩ load. The TENG demonstrates stable performance …

Mechanochemical Synthesis Of Ni(Ii)-Tptz Complexes With Co-Ligands: Spectroscopy, Dft, And Biological Studies, Deepak Senapati, Anulipsa Priyadarshini, Debadutta Samal, P. Ramesh Babu, Satyanarayan Sahoo, Narayan Chandra Bera, Raghabendra Samantaray, Jagannath Panda, Rojalin Sahu

Journal of Metals, Materials and Minerals

New mixed-ligand Ni(II) complexes [Ni(tptz)(1,10-phen)] (1), [Ni(tptz)(2-Mimd)2] (2), and [Ni(tptz)Imd)2] (3) were synthesized via a green, solvent-free mechanochemical approach using ball milling. The primary ligand used was 2,4,6-tris(2-pyridyl)-1,3,5-triazine (tptz), with secondary ligands being 1,10-phenanthroline, 2-methyl imidazole, and imidazole, respectively. Structural characterization by IR, UV-Visible, photoluminescence spectroscopy, and powder X-ray diffraction, supported by DFT calculations, revealed a distorted square planar geometry for complex 1 and distorted tetrahedral geometries for complex-2 and complex-3. Notably, bathochromic shifts in the UV-Vis spectra confirm metal-ligand charge transfer transitions and extended π-delocalization. Powder XRD analysis determined average crystallite sizes of 17.86 nm (1), 25 nm (2), …

Cross-Facility Reliable Deep Learning Based Beef Marbling Assessment Via Unsupervised Domain Adaptation Regression, Samuel Vinson, Dongyi Wang

2025 Research Poster Competition

Beef is one of the most important sources of animal protein and plays a crucial role in daily diets to support muscle growth, energy production and overall health. Historically, each beef carcass was evaluated by 3-5 skilled United States Department of Agriculture (USDA) meat graders, which are still considered as the gold standard for grading. Since 2009, electronic imaging grading systems have been approved by the USDA and have been gradually adopted in the grading facilities. Accurate and consistent beef grading plays a critical role in maintaining the quality, market value, and consumer trust in U.S. beef products. The USDA …

3d Bioprinting Technology Innovation In Female Reproductive System, Siyao Chen, Tongxin Wang, Jiaqi Chen, Mingxing Sui, Luyao Wang, Xueyu Zhao, Jianqiao Sun, Yingli Lu

Department of Obstetrics & Gynecology Faculty Publications

Several diseases affect the female reproductive system, and both disease factors and treatments impact its integrity and function. Consequently, understanding the mechanisms of disease occurrence and exploring treatment methods are key research focuses in obstetrics and gynecology. However, constructing accurate disease models requires a microenvironment closely resembling the human body, and current animal models and 2D in vitro cell models fall short in this regard. Thus, innovative in vitro female reproductive system models are urgently needed. Additionally, female reproductive system diseases often cause tissue loss, yet effective tissue repair and regeneration have long been a bottleneck in the medical field. …

Neurovascular Coupling Impairments In Acute Traumatic Brain Injury: An Eeg-Nirs Analysis, Zachary Armstrong

Bioengineering Theses - Archive

Traumatic brain injury (TBI) is a major cause of neurological impairment, often leading to variable recovery and uncertain prognosis in the neurocritical care setting. There is a pressing clinical need for robust, physiologically grounded biomarkers to inform prognosis and therapeutic decision-making in acute TBI. This thesis investigates neurovascular coupling (NVC), the physiological coordination between neuronal activity and cerebral blood flow, as a candidate biomarker for brain function and recovery after injury.

A prospective cohort study was performed using simultaneous electroencephalography (EEG) and near-infrared spectroscopy (NIRS) recordings in patients with moderate-to-severe TBI and healthy controls. Wavelet transform coherence (WTC) analysis was …

An Educational Framework For The Disruptive Technologies And Their Integration In The Un Sdgs Curriculum, Tulsi Pawan Fowdur, Aishani Radhakeesoon

Journal of Educational Technology Development and Exchange (JETDE)

Disruptive technologies such as 5G, AI, IoT, cloud computing, and blockchain are revolutionizing life on our planet and at the same time contributing immensely towards sustainable development and the achievement of the UN SDGs. Nowadays, optimizing the management of resources in various fields such as manufacturing, education, health, transportation etc. in a much more efficient way is possible. This can be achieved by capturing a wealth of real-time data via IoT sensors with the ultra-reliable and low latency connections provided by 5G. Additionally, with cloud computing, blockchain, and AI, these real-time systems can securely transmit, store, and analyze a massive …

Development Of 2d Microfluidics Surface With Low-Frequency Electric Fields For Cell Separation Applications, Madushan Wickramasinghe, Dharmakeerthi Nawarathna

Electrical & Computer Engineering Faculty Publications

Cell separation techniques are widely used in many biomedical and clinical applications for the development of screening, diagnosis and therapeutic tests. Current 3D microfluidics-based cell separation methods have limited applications in part due to low throughput and technical complexity. To address these critical needs, we have developed a 2D microfluidics surface which is the miniaturized version of a 3D microfluids cell separation device. Using low-frequency electric fields (1–10 Vpp and 1 kHz–20 MHz), we have first studied dielectrophoresis, AC electro-osmosis and capillary flow within a sessile drop, and finally utilized the results to develop the 2D cell separation surface. Our …

Novel Micro-And Nanoformulations Of Paclitaxel For Targeting Metastatic Breast, Non-Small Cell Lung, And Pancreatic Cancers, Lobat Tayebi, Mehran Alavi

Electrical & Computer Engineering Faculty Publications

Nonlinear pharmacokinetics resulting from high lipophilic and low oral bioavailability, and hypersensitivity reactions and hyperlipidemia caused by formulation by Cremophor EL have limited clinical effectiveness of paclitaxel (Taxol). In this way, there is the critical necessity of innovative drug delivery systems (DDSs) to mitigate severe side effects and overcome clinical limitations of paclitaxel. In recent years, various micro- and nanoformulations, specifically polymeric nanoparticles (NPs) and lipid NPs, have been presented and approved by the Food and Drug Administration (FDA). In addition, other nanoformulations, such as polymeric nanoparticles (NPs), micelles, liposomes, and mesoporous silica nanoparticles, have shown promising results in vitro …

Cellax Nanoparticles: Taxane Nanoformulations For Solid Tumor Targeting, Lobat Tayebi, Mehran Alavi

Electrical & Computer Engineering Faculty Publications

Nanoparticles (NPs), specifically polymer-modified NPs, have illustrated unique therapeutic advantages compared to bulk materials. Cellax NPs have provided a promising approach to cancer therapy by improving drug delivery, targeting the tumor microenvironment, and potentially overcoming drug resistance, all while reducing overall toxicity compared to traditional taxane treatment. By the flash nanoprecipitation (FNP) method, docetaxel and cabazitaxel have been formulated with polyethylene glycol (PEG) modified-acetylated carboxymethylcellulose (CMC) polymer to increase biocompatibility, bioavailability, specific targeting, and modulate the tumor microenvironment. However, there are some challenges and clinical limitations related to this formulation, encompassing optimum targeted delivery to tumors, overcoming biological barriers, such …

Ai-Based Steganography Method To Enhance The Information Security Of Hidden Messages In Digital Images, Nhi Do Ngoc Huynh, Jiajun Jiang, Chung-Hao Chen, Wen-Chao Yang

Electrical & Computer Engineering Faculty Publications

With the increasing sophistication of Artificial Intelligence (AI), traditional digital steganography methods face a growing risk of being detected and compromised. Adversarial attacks, in particular, pose a significant threat to the security and robustness of hidden information. To address these challenges, this paper proposes a novel AI-based steganography framework designed to enhance the security of concealed messages within digital images. Our approach introduces a multi-stage embedding process that utilizes a sequence of encoder models, including a base encoder, a residual encoder, and a dense encoder, to create a more complex and secure hiding environment. To further improve robustness, we integrate …

Advances In Bacterial Cellulose-Based Scaffolds For Tissue Engineering: Review, Rewati Raman Ujjwal, Gymama Slaughter

Center for Bioelectronics Publications

Bacterial cellulose (BC) has emerged as a highly versatile and promising biomaterial in tissue engineering, with potential applications across skin, bone, cartilage, and vascular regeneration. Its exceptional properties like high mechanical strength, superior biocompatibility, excellent moisture retention, and inherent ability to support cell adhesion and proliferation, make BC particularly effective for wound healing and skin regeneration. These attributes accelerate tissue repair and foster new tissue formation, highlighting its value in skin-related applications. Additionally, BC's capacity to support osteogenic differentiation, combined with its mechanical robustness, positions it as a strong candidate for bone tissue engineering, facilitating regeneration and repair. Recent advancements …

Using Post-Supercritical Co2-Assisted Method To Deposit Niep Alloy Coating On The Micro-Arc Oxidation Layer Of Az31 Magnesium Alloy And Its Corrosion Behavior Analysis, Kang-Yu Liao, Hung-Hua Sheu, Ming-Yuan Lin, Ming-Chih Kuo, Po-Hsun Wu, Hung-Bin Lee

Journal of Marine Science and Technology–Taiwan

In this study, a Ni-P alloy coating was deposited on the micro arc oxidation (MAO) layer of AZ31 magnesium alloy to improve its corrosion resistance. The MAO layers were prepared under different operated voltages from 300 to 400 V. The results indicated that the optimize operated parameters for MAO layer is at 350 V, the MAO coatings had the most compact microstructure and superior corrosion resistance. In order to improve the corrosion resistance of MAO coating, this study chose to deposit Ni-P alloy coating on the surface of MAO coating via the post supercritical CO₂-assisted electroless plating (PSC-CO …

Evaluation Of Carbon Sequestration In Seagrass Meadows Of Kenting: A Comparative Study With Penghu And Dongsha Island, Zih-Wei Tang, Huei-Fen Chen, Jordi Mahardika Puntu, Ping-Yu Chang, Li Lo, Jian-Jhih Chen, Wen-Chen Chou, Lan-Feng Fan, Ying-Ju Chang

Journal of Marine Science and Technology–Taiwan

This study investigates the controlling factors of carbon sequestration (CS) in seagrass bed sediments across three distinct environments in Taiwan: the Kenting (KT) coastal area, the Penghu (PH) open inner bay, and the Dongsha (DS) Atoll lagoon. Actual measurements of the substrate depth beneath the sediment and ground-penetrating radar (GPR) scans of the beach reveal that the coral reef bedrock in KT slopes landward. A field survey of the seagrass area in KT was conducted, and three cross-sectional profiles were analyzed to determine their topography, yielding a median sediment thickness of 88.2cm. Based on these measurements, the sediment volume was …