Digital Commons Network^™

An Analysis Of Printed Circuit Boards During Reflow Soldering., Paul Barry

Theses

Electronic manufacturing is currently one of the fastest growing industrial areas. This is due to the rapid advances in the computer and telecommunications sectors. Due to these advances, new surface mount devices have been developed to achieve greater miniaturisation at lower costs. As a result, a new surface mount technology has been developed to mount these devices onto printed circuit boards. However, problems exist with aspects of this process, principally open solder joints which result from circuit board warpage. The aim of this thesis is to undertake a) both an experimental and theoretical investigation of the reflow solder process and …

Microwave Plasma Chemical Vapor Deposited Diamond Tips For Scanning Tunneling Microscopy, Sacharia Albin, Jianli Zheng, John B. Cooper, Weihai Fu, Arnel C. Lavarias

Electrical & Computer Engineering Faculty Publications

Diamond microparticles were grown on etched tungsten wires using a microwave plasma-assisted chemical vapor deposition process. The apexes on cubo-octahedral particles bound by {100} and {111} facets were effectively used as tunneling tips for scanning tunneling microscopy. The atomically resolved surface image of highly oriented pyrolytic graphite was acquired. Tunneling characteristics revealed a higher electron emission from the diamond tips than that from the platinum–iridium tips. The same diamond tips were used to produce surface indentation and its image. © 1997 American Institute of Physics.

Modeling Of Fading Dynamics For The Indoor Microwave Channel, Mangeet Singh

Theses : Honours

This report outlines the multipath fading phenomenon and its relationship to wireless system design. The work was conducted for the academic year of 1996. This report provides the reader with an insight into the phenomenon called fading and its relevance when designing wireless systems. Fading is an important consideration when wireless systems are to be designed. Because fading is very unpredictable and it cannot to totally eliminated in a wireless system, systems engineers have a hard time trying to design and commission efficient communication systems for a particular environment. Over the years, there has been a existing need worldwide to …

The Electrodynamic Levitation Of A Collar : Analysis, Experimentation And Simulation, Philip Nixon

Theses

This dissertation describes various methods of maintaining a collar levitated in a vertical axis, using the well-known principle of electromagnetic induction between two circuits. The advantages of closing the magnetic loop around the collar, to obtain large radial flux cutting the collar and, therefore, large lifting forces for a given induced current, are considered in depth.

The ideal magnetic circuit and the equivalent electrical circuit are used in developing a model for two topologies of core (both an open and closed-circuit core) levitating a nonmagnetic conducting collar above a coil. Various affects that degrade the performance of the levitation rig …

Estimation Of Surface Snow Properties Using Combined Millimeter-Wave Backscatter And Near-Infrared Reflectance Measurements, Ram M. Narayanan, Sandy R. Jackson

Department of Electrical and Computer Engineering: Faculty Publications

Knowledge of surficial snow properties such as grain size, surface roughness, and free-water content provides clues to the metamorphic state of snow on the ground, which in turn yields information on weathering processes and climatic activity. Remote sensing techniques using combined concurrent measurements of near-infrared passive reflectance and millimeter-wave radar backscatter show promise in estimating the above snow parameters. Near-infrared reflectance is strongly dependent on snow grain size and free-water content, while millimeter-wave backscatter is primarily dependent on free-water content and, to some extent, on the surface roughness. A neural-network based inversion algorithm has been developed that optimally combines near-infrared …

Parallel Algorithms For Single-Layer Channel Routing, Ronald I. Greenberg, Shih-Chuan Hung, Jau-Der Shih

Computer Science: Faculty Publications and Other Works

We provide efficient parallel algorithms for the minimum separation, offset range, and optimal offset problems for single-layer channel routing. We consider all the variations of these problems that are known to have linear- time sequential solutions rather than limiting attention to the "river-routing" context, where single-sided connections are disallowed. For the minimum separation problem, we obtain O(lgN) time on a CREW PRAM or O(lgN / lglgN) time on a (common) CRCW PRAM, both with optimal work (processor- time product) of O(N), where N is the number of terminals. For the offset range problem, we obtain the same time and processor …

Safety Analysis Of Redundant Systems Using Fuzzy Probability Theory, James P. Dunyak, Ihab W. Ssad, Donald C. Wunsch

Electrical and Computer Engineering Faculty Research & Creative Works

No abstract provided.

Damage Detection Of Bridge-Like Structures Using State Space Models, Javier Valentin Sivico

Masters Theses

"A global damage detection algorithm for bridge-like structures is proposed. This method provides the capability of determining the reduction in both stiffness and damping parameters of the structural elements. It is assumed the mass of the structural elements is not affected by the damages, which is a reasonable assumption for bridge-like structures. The proposed method uses the state space representation of the structural dynamics to make the diagnosis of the structural integrity. Given that the state space representation of any system is not unique, the damage detection procedure is developed for the physical coordinates of the state space representation. A …

Prediction Of Yarn Strength From Fiber Properties Using Fuzzy Artmap, Raonak Zaman, Donald C. Wunsch

Electrical and Computer Engineering Faculty Research & Creative Works

The count-strength-product (CSP) of cotton yarn is a complex function of fiber properties and spinning performance. The traditional way of predicting yarn CSP is using linear multiple regression. The correlation coefficient between actual CSP and predicted CSP obtained from linear regression is almost always less than 0.9. In this paper, we used a Fuzzy ARTMAP network to predict yarn CSP from fiber properties and spinning performance. Fiber properties and spinning data were used as inputs to ART_a, and yarn CSP was used as ART_b input. Our objectives are: better prediction of the quality of the end product, …

New Approaches To Column Compatibility Checking And Column-Based Input/Output Encoding For Curtis Decompositions Of Completely Or Incompletely Specified Switching Functions, Michael A. Burns

Dissertations and Theses

Cube calculus is an algebraic model used to process boolean functions. Cube calculus operations are widely used in logic optimization, logic synthesis, image processing and recognition, machine learning, and other applications which require massive logic operations.

The cube calculus operations can be carried out on general-purpose computers. Since these operations can involve several levels of nested loops, this approach has poor performance.

A cube calculus machine which has a special data path designed to speed up cube calculus operations is presented in this thesis. This c-qbe calculus machine can execute cube calculus operations 10 to 25 times faster than the …

Reflection High-Energy Electron-Diffraction Study Of Melting And Solidification Of Pb On Graphite, Z. H. Zhang, P. Kulatunga, H. E. Elsayed-Ali

Electrical & Computer Engineering Faculty Publications

The melting and solidification of Pb thin films on pyrolytic graphite are investigated in situ by reflection high-energy electron diffraction. Thin films with thicknesses of 4-150 monolayers are investigated. The surface morphology of the thin films were studied by scanning electron microscopy. Superheating of the Pb thin films by 4±2 to 12±2 K is observed from diffraction intensity measurements. Upon cooling the substrate, the Pb on graphite is seen to supercool by ∼69±4 K.

Femtosecond Photoemission Study Of Ultrafast Electron Dynamics On Cu(100), J. Cao, Y. Gao, R. J. D. Miller, Hani E. Elsayed-Ali, D. A. Mantell

Electrical & Computer Engineering Faculty Publications

The energy dependence of the relaxation of photoexcited electrons in copper was measured using femtosecond time-resolved photoemission spectroscopy to within 0.3 eV above the Fermi level. By performing lifetime measurements under different surface conditions, several surface dynamical processes were investigated. In particular, an anomalous long lifetime feature, which cannot be explained with Fermi-liquid theory, was observed in the lifetime-energy curve. This feature was found originating from the photoexcitation of the strongly localized Cu 3d electrons. ©1997 American Physical Society

Trade-Off Study And Computer Simulation For Assessing Spacecraft Pointing Accuracy And Stability Capabilities, Marcelo C. Algrain, Richard M. Powers

Department of Electrical and Computer Engineering: Faculty Publications

A case study, written in a tutorial manner, is presented where a comprehensive computer simulation is developed to determine the driving factors contributing to spacecraft pointing accuracy and stability. Models for major system components are described. Among them are spacecraft bus, attitude controller, reaction wheel assembly, star-tracker unit, inertial reference unit, and gyro drift estimators (Kalman filter). The predicted spacecraft performance is analyzed for a variety of input commands and system disturbances. The primary deterministic inputs are the desired attitude angles and rate set points. The stochastic inputs include random torque disturbances acting on the spacecraft, random gyro bias noise, …

Equalization Of A Non-Linear Phase Of A Low-Pass Filter, Rabih Khodor

Dissertations and Theses

In practice, an IIR filter can distort the information content of the signal because of its inherent non-linear phase characteristics introduced through the design of the filter. If the the receiver of the signal is the human ear, e.g., when a speech or music signal is to be processed, phase distortion is quite tolerable. But, in other applications it can be rejected as phase characteristics is required to be fairly linear. Applications of this type include data transmission, where the signal is to be interpreted by digital hardware, and image processing, where the signal is used to reconstruct an image …

Performance Analysis Of A Hartman Wavefront Sensor Used For Sensing Atmospheric Turbulence Statistics, Toby D. Reeves

Theses and Dissertations

Atmospheric turbulence parameters, such as Fried's coherence diameter, the outer scale of turbulence, and the turbulence power law, are related to the wavefront slope structure function (SSF). The SSF is defined as the second moment of the wavefront slope difference as a function of both time and position. Knowledge of the SSF allows turbulence parameters to be estimated. Hartmann wavefront sensor (H-WFS) slope measurements composed of both signal and noise, allow the SSF to be estimated by computing a mean square difference of H-WFS slope measurements. The quality of the SSF estimate is quantified by the signal-to-noise ratio (SNR) of …

Countering The Effects Of Measurement Noise During The Identification Of Dynamical Systems, Odell R. Reynolds

Theses and Dissertations

Sensor noise is an unavoidable fact of life when it comes to measurements on physical systems, as is the case in feedback control. Therefore, it must be properly addressed during dynamic system identification. In this work, a novel approach is developed toward the treatment of measurement noise in dynamical systems. This approach hinges on proper stochastic modeling, and it can be adapted easily to many different scenarios, where it yields consistently good parameter estimates. The Generalized Minimum Variance algorithm developed and used in this work is based on the theory behind the minimum variance identification process, and the estimate produced …

Perceptual Fidelity For Digital Color Imagery, Curtis E. Martin

Theses and Dissertations

The problem of measuring the fidelity of digital color images in a manner that corresponds to human perceptual assessments is addressed. Experiments are performed to validate human visual system (HVS) models, which provide access to a 'perceptual space' in which visual distortions may be measured, and then a model is proposed for assessing the perceptual fidelity of digital color image. Color Mach bands are produced in the first experiment, demonstrating that, as in the brightness channel, low spatial frequency attenuation occurs in the chromatic channels of the HVS. In the second experiment, a correlation between the chromatic channels of the …

Development Of Object-Based Teleoperator Control For Unstructured Applications, Hyunki Cho

Theses and Dissertations

For multi-fingered end effectors in unstructured applications, the main issues are control in the presence of uncertainties and providing grasp stability and object manipulability. The suggested concept in this thesis is object based teleoperator control which provides an intuitive way to control the robot in terms of the grasped object and reduces the operator's conceptual constraints. The general control law is developed using a hierarchical control structure, i.e., human interface I gross motion control level in teleoperation control and fine motion control/object grasp stability in autonomous control. The gross motion control is required to provide the position/orientation of the Super …

A Two-Phase Damped-Exponential Model For Speech Synthesis, H. Allan Arb

Theses and Dissertations

It is well known that there is room for improvement in the resultant quality of speech synthesizers in use today. This research focuses on the improvement of speech synthesis by analyzing various models for speech signals. An improvement in synthesis quality will benefit any system incorporating speech synthesis. Many synthesizers in use today use linear predictive coding (LPC) techniques and only use one set of vocal tract parameters per analysis frame or pitch period for pitch-synchronous synthesizers. This work is motivated by the two-phase analysis-synthesis model proposed by Krishnamurthy. In lieu of electroglottograph data for vocal tract model transition point …

Analysis Of Multimode Low-Probability-Of-Intercept (Lpi) Communications With Atmospheric Effects, Ala Ghordlo

Theses and Dissertations

This research expanded Low Probability of Intercept (LPI) communications analysis in two areas. First, multimode communication was included to account for ground to ground and air to ground links in addition to the standard air to air links traditionally used in LPI analysis. The propagation equations for the three modes of interest were derived and included in LPI analytic models in the form of a mode quality factor to account for multimode LPI scenarios. This new quality factor was used in studying several communication and interception link combinations. Variations due to differences between the communication and interception modes were presented …

Application Of A Finite-Volume Time-Domain Maxwell Equation Solver To Three-Dimensional Objects, Frederick G. Harmon

Theses and Dissertations

Concurrent engineering approaches for the disciplines of computational fluid dynamics (CFD) and electromagnetics (CEM) are necessary for designing future high-performance, low-observable aircraft. A characteristic-based finite-volume time-domain (FVTD) computational algorithm, developed for CFD and now applied to CEM, is implemented to analyze the radar cross section (RCS) of two three-dimensional objects, the ogive and cone-sphere. The FVTD formulation implements a Monotone Upstream-Centered Scheme for Conservation Laws (MUSCL) algorithm for the flux evaluation and a Runge-Kutta multi-stage scheme for the time integration. Developmental FVTD work for the thesis focused on algorithm development to analyze scattering and obtain RCS data for closed-surface perfect …

Adaptive Neural Network Controller For Atm Traffic, Jeffrey E. Larson

Theses and Dissertations

Broadband-Integrated Services Digital Networks (B-ISDN), along with Asynchronous Transfer Mode (ATM), were designed to meet the requirements of modern communication networks to handle multiple users and a wide variety of diverse traffic including voice, data and video. ATM responds to requests for admission to the network by analyzing whether or not the grade of service (GOS) requirement, specified in the admission request, can be guaranteed without violating the GOS guaranteed to traffic already accepted into the network. The GOS is typically a parameter such as cell loss rate (CLR), average delay, or some other measurement associated with network performance. In …

Interference Suppression For Spread Spectrum Signals Using Adaptive Beamforming And Adaptive Temporal Filter, Wonjin Park

Theses and Dissertations

Interference and jamming signals are a serious concern in an operational military communication environment. This thesis examines the utility and performance of combining adaptive temporal filtering with adaptive spatial filtering (i.e. adaptive beamforming) to improve the signal-to-jammer ratio (SJR) in the presence of narrowband and wideband interference. Adaptive temporal filters are used for narrowband interference suppression while adaptive beamforming is used to suppress wideband interference signals. A procedure is presented for the design and implementation of a linear constraints minimum variance generalized sidelobe canceler (LCMV-GSC) beamformer. The adaptive beamformer processes the desired signal with unity gain while simultaneously and adaptively …

Evaluation Of Design Tools For Rapid Prototyping Of Parallel Signal Processing Algorithms, James C. Savage

Theses and Dissertations

Digital signal processing (DSP) has become a popular method for handling not only signal processing, but communications, and control system applications. A DSP application of interest to the Air Force is high speed avionics processing. The real time computing requirements of avionics processing exceed the capabilities of current single chip DSP processors, and parallelization of multiple DSP processors is a solution to handle such requirements. Designing and implementing a parallel DSP algorithm has been a lengthy process often requiring different design tools and extensive programming experience. Through the use of integrated software development tools, rapid prototyping becomes possible by simulating …

Experimental Investigation Of Radar Cross Section Spatial Correlation Properties For A Point Scattering Target, John D. Shannon

Theses and Dissertations

This research investigates the spatial correlation of RCS. In pulsed radar systems, probability of detection for partially correlated signals depends on the autocovariance of the target's RCS. The RCS changes pulse to pulse due to spatial and time fluctuations. Spatial fluctuation are due to the motion of all scatterers relative to the radar (i.e. changing aspect angle). Time fluctuations are due to relative motion of scatterers to each other (i.e. wings flexing, engines spinning). Theory developed at AFIT [9] can generate autocovariance estimates from a distribution of scatterers. Theory based autocovariance estimates are compared to static measurement based autocovariance estimates …

Mmae Detection Of Interference/Jamming And Spoofing In A Dpgs-Aided Inertial System, Nathan A. White

Theses and Dissertations

Previous research at AFIT has resulted in the development of a DGPS-aided INS-based precision landing system (PLS) capable of meeting the FAA precision requirements for instrument landings. The susceptibility of DGPS transmissions to interference/jamming and spoofing must be addressed before DGPS may be used in such a safety-of-flight critical role. This thesis applies multiple model adaptive estimation (MMAE) techniques to the problem of detecting and identifying interference/jamming and spoofing failures in the DGPS signal. Such an MMAE is composed of a bank of parallel filters, each hypothesizing a different failure status, along with an evaluation of the current probability of …

Automated State Model Generation Algorithm For Power Circuits And Systems, O. Wasynczuk, Scott D. Sudhoff

Electrical and Computer Engineering Faculty Research & Creative Works

A new approach of automatically generating state-space models of power circuits and systems is presented. In this approach, the composite system state equations are established algorithmically given the standard node incidence matrix and elementary branch data (e.g. resistances, inductances, back emf's). The resulting state equations can be solved using a variety of numerical techniques or commercially available computer simulation programs. An example system consisting of a three-phase generator and rectifier load is used to illustrate this approach. Experimental verification is also provided. © 1996 IEEE.

Controlling Three-Axis Attitude Rates On A Pointing System Using Nonlinear Observer And Two Axis Measurements, Marcelo C. Algrain

Department of Electrical and Computer Engineering: Faculty Publications

A new observer design method that allows for estimating the angular rates along a vehicle’s three principal axes is described. The observer uses measurements from a single two-axis angular rate sensor (gyro) and determines the rates for the third axis using a nonlinear observer. Unlike conventional approaches where the equations governing vehicle motion (Euler’s equations) are linearized and then an observer is constructed based on the linear model, this method does not require linearization of the system. Instead, a pseudo-linear representation is used. The pseudo-linear model is obtained by systematically decomposing a nonlinear system into linear and nonlinear terms. The …

Surface Modifications Of Carbon Materials Used As Anode Of Lithium Ion Battery Ⅰ. Influences Of Oxidation And Reduction Pretreatment On Anode Performance, Shuhua Ma, Hanju Guo, Ji Li, Hongze Liang, Xiabin Jing, Fosong Wang

Journal of Electrochemistry

The influences of the trace oxygen containing functional groups on surface of carbon material on cell performance of carbon anode for lithium ion batteries were studied by means of the pretreament in various oxidant/reductant systems. The results showed that the rich oxygen containing functional groups impaired the cell performance of carbon material anode, and the reduction of these groups in quantity and oxidation degree can increase charge/discharge capacity and improve first charge/discharge efficiency. The reason was also discussed in the light of effects of surface organic groups on decomposition reactivity of electrolyte and formation process of surface passivating film.

The Current Distribution On The Anode Surface Of The Seale Oval Tubular Lead Acid Battery, Renao Gu, Jianlin Yao, Zhengfa Deng, Ru Sun, Liren Wu, Zhongsi Jiang, Wangen Miao

Journal of Electrochemistry

The current distribution on anode surface of sealed lead acid batter under different discharge current and degree was studied by chemical analytical method for the first time. We can conclude that the current distribution is not even. The current density on the edge of the electrode surface and the electrode terminal are bigger than other areas, that is, there are edge effect and terminal effect, and these effect are more obvious when the discharge current is 100 A and degree is 100%.