Open Access. Powered by Scholars. Published by Universities.®

Digital Commons Network™

Open Access. Powered by Scholars. Published by Universities.®

Electrical and Computer Engineering

Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 15061 - 15090 of 18173

Full-Text Articles in Entire DC Network

The Development Of A Small Scale Radio Astronomy Image Synthesis Array For Research In Radio Frequency Interference Mitigation, Jacob L. Campbell Sep 2005

The Development Of A Small Scale Radio Astronomy Image Synthesis Array For Research In Radio Frequency Interference Mitigation, Jacob L. Campbell

Theses and Dissertations

Radio astronomy synthesis imaging arrays are composed of many parabolic reflector antennas. These antennas are designed to be extremely sensitive to detect faint emissions from astronomical sources. Unfortunately, this also makes them susceptible to radio frequency interference (RFI) from man made sources such as orbiting satellites. The radio astronomy research group at Brigham Young University (BYU) is investigating methods to mitigate the effects of RFI in radio astronomy synthesis imaging. Though real-time RFI mitigation has been demonstrated for a large single dish telescope, for synthesis imaging arrays our prior work has consisted solely of algorithm development and computer simulations. To …

Go to article

Nonlinear Regression Methods For Estimation, Eric B. Nelson Sep 2005

Nonlinear Regression Methods For Estimation, Eric B. Nelson

Theses and Dissertations

Regression techniques are developed for batch estimation and applied to three specific areas, namely, ballistic trajectory launch point estimation, adaptive flight control, and radio-frequency target triangulation. Specifically, linear regression with an intercept is considered in detail. An augmentation formulation is developed. Extensions of theory are applied to nonlinear regression as well. The intercept parameter estimate within the linear regression is used to identify the effects of trim change that are associated with the occurrence of a control surface failure. These estimates are used to adjust the inner loop control gains via a feed-forward command, hence providing an automatic reconfigurable retrim …

Go to article

Impact Of Receive Amplifier Signal Coupling On Mimo System Performance, Michael A. Jensen, Matthew L. Morris Sep 2005

Impact Of Receive Amplifier Signal Coupling On Mimo System Performance, Michael A. Jensen, Matthew L. Morris

Faculty Publications

This paper uses a detailed model of multiple input multiple output (MIMO) systems to explore the impact of signal coupling in the receiver front end on communication capacity. The model is applied to assess the performance of a MIMO system with two transmit and receive antennas in a simulated multipath environment for different amplifier coupling levels. The results show that in practical scenarios where simple impedance matching techniques are used, the circuit coupling can reduce the signal-to-noise ratio at the receiver and therefore degrade the achievable MIMO capacity.

Go to article

Superdirectivity In Mimo Systems, Michael A. Jensen, Matthew L. Morris, Jon W. Wallace Sep 2005

Superdirectivity In Mimo Systems, Michael A. Jensen, Matthew L. Morris, Jon W. Wallace

Faculty Publications

Multiantenna systems such as devices for multiple-input-multiple-output (MIMO) communication can theoretically use array superdirectivity to optimally exploit the propagation channel. In traditional analyses of MIMO systems, such superdirectivity is not observed due to the commonly applied constraint that limits the excitation current magnitudes. However, when an electromagnetically appropriate constraint on the power radiated by the array is applied, the computed capacity can include effects of transmit superdirectivity. A similar result occurs at the receiver for spatially colored noise. This paper formulates the MIMO system capacity under these circumstances and provides a framework for computing this capacity when the level of …

Go to article

Variable Permittivity Dielectric Material Loaded Stepped-Horn Antenna, Ozgur Ozdemir Aug 2005

Variable Permittivity Dielectric Material Loaded Stepped-Horn Antenna, Ozgur Ozdemir

Dissertations

Stepped-horn antenna loaded with dielectric material of variable permittivity is proposed to improve radiation characteristics and/or to increase the electrical dimensions of the radiating structure compared to unloaded empty one. A hybrid numerical technique is used to analyze such an antenna. The tapered section of the horn antenna is modeled by multi-stepped waveguide structures filled with variable dielectric constant material. Generalized scattering matrix representation of the tapered section of the horn antenna is obtained using mode matching technique. The radiating aperture problem is solved by the method of moments, under the assumption that the horn is terminated by an infinite …

Go to article

Enhancing End-To-End Quality Of Service Provisioning In Wireless Ad Hoc Networks Using Service Vectors, Didem Gozupek Aug 2005

Enhancing End-To-End Quality Of Service Provisioning In Wireless Ad Hoc Networks Using Service Vectors, Didem Gozupek

Theses

A cross-layer architecture that achieves significant power savings, while enhancing the end-to-end QoS provisioning and granularity in wireless ad hoc networks is proposed in this thesis. Recently, a new concept called service vector has been introduced, which enables an end host to choose different service classes along its data path. This scheme enhances the user benefits from the network services and network resource utilization, while maintaining the simplicity and scalability of the current Differentiated Services (DiffServ) network architecture. This thesis explores the application of this concept on wireless ad hoc networks and provides a cross-layer architecture based on the combination …

Go to article

Multicodes For Improved Range Resolution In Radar, Rhiya Vitto Aug 2005

Multicodes For Improved Range Resolution In Radar, Rhiya Vitto

Theses

Third generation (3G) wireless systems are required to support a variety of communication services like voice, image, motion picture transmission, etc, each of which requires different transmission rates. Multi-code modulation has been introduced therefore as a means of supporting multi-rate services and operating in multi-cell environments [8, 9, 10]. This multi-rate multi-function capability may be used in Radar related applications, too. For example, a single transmitted waveform consisting of two orthogonal codes can be used to simultaneously track a target and obtain high range resolution. Tracking requires low bandwidth and high resolution needs a high bandwidth signal. Orthogonal codes like …

Go to article

System And Method Enabling Simultaneous Investigation Of Sample With Two Beams Of Electromagnetic Radiation, John A. Woollam, Galen L. Pfeiffer, Daniel W. Thompson, Blaine D. Johs, Craig M. Herzinger Aug 2005

System And Method Enabling Simultaneous Investigation Of Sample With Two Beams Of Electromagnetic Radiation, John A. Woollam, Galen L. Pfeiffer, Daniel W. Thompson, Blaine D. Johs, Craig M. Herzinger

Department of Electrical and Computer Engineering: Faculty Publications

Disclosed are system and method for a characterizing system consisting of a fluid sample on a two-sided stage, utilizing data obtained by applying, from both sides thereof, beams of electromagnetic radiation to a fluid coated surface in a containing cell volume. The beams can have the same or different wavelength content and/or polarization state and can be applied at the same or different magnitude angles-of-incidence, and a third typically unpolarized beam can be applied at a normal angle-of-incidence.

Go to article

System And Method Enabling Simultaneous Investigation Of Sample With Two Beams Of Electromagnetic Radation, John A. Woollam, Galen L. Pfeiffer, Daniel W. Thompson, Blaine D. Johs, Craig M. Herzinger Aug 2005

System And Method Enabling Simultaneous Investigation Of Sample With Two Beams Of Electromagnetic Radation, John A. Woollam, Galen L. Pfeiffer, Daniel W. Thompson, Blaine D. Johs, Craig M. Herzinger

Department of Electrical and Computer Engineering: Faculty Publications

Disclosed are System and method for characterizing a System consisting of a fluid Sample on a two sided Stage, utilizing data obtained by applying, from both sides thereof, beams of electromagnetic radiation to a fluid coated Surface in a containing cell Volume. The beams can have the same or different wavelength content and/or polarization State, and can be applied at the same or different magnitude angles-of-incidence, and a third typically unpolarized beam can be applied at a normal angle-of-incidence.

Go to article

An Integrated Model For Signalized Traffic Intersection Control, Xiao-Hua Yu Aug 2005

An Integrated Model For Signalized Traffic Intersection Control, Xiao-Hua Yu

Electrical Engineering

Traffic signal control is an effective way to regulate traffic flow to avoid conflict and reduce congestions. This research investigates a real-time traffic signal control system that integrates a traffic flow prediction model and an adaptive control scheme based on dynamic programming with rolling horizon. The proposed approach estimates the parameter of the arriving traffic flow at the intersection, predicts the state transition probabilities, and then formulates the traffic signal control problem as a decision-making problem of a stochastic system. Two different traffic arrival patterns are considered, including the normal distribution and the Poission distribution.

Go to article

Electrocatalytic Oxidation And Degration Of Active Red X-3b By Nanotubes Catalytic Electrodes, Yi Wen, Jian-Hui Fang, Wei-Min Cao, Li-Yi Shi Aug 2005

Electrocatalytic Oxidation And Degration Of Active Red X-3b By Nanotubes Catalytic Electrodes, Yi Wen, Jian-Hui Fang, Wei-Min Cao, Li-Yi Shi

Journal of Electrochemistry

The catalytic splitting decomposition of carbon nanotubes isprocessed by dispersing with dilute nitric acid and thermal oxidation. Then well-proportionedphenolic resin is mixed in the carbon nanotubes. Then, the carbon nanotubesare made into electrodes by hot-press molding after the process of milling with high speed. The surface of the carbon nanotubes electrodes is analyzed by SEM. Active red X-3B simulated waster water is disposed by carbon nanotubes catalyticelectrode (anode) and stainless steel(cathode). The influencing factors of degradation by current density, concentrationof electrolyte, systemtemperature and pH are investigated. The experimental results indicated that acidiccondition is propitious tothe degradationreaction of organicdyestuff and wastewater …

Go to article

Effect Of Sintering Temperatures On Synthesis Of Mgco0.4Mn1.6O4 Positive Materials In Magnesium Ion Battery, Xiu-Ling Gao, Li-Fang Jiao, Hua-Tang Yuan, Jian-Sheng Cao, Ming Zhao, Hai-Xia Li, Yong-Mei Wang Aug 2005

Effect Of Sintering Temperatures On Synthesis Of Mgco0.4Mn1.6O4 Positive Materials In Magnesium Ion Battery, Xiu-Ling Gao, Li-Fang Jiao, Hua-Tang Yuan, Jian-Sheng Cao, Ming Zhao, Hai-Xia Li, Yong-Mei Wang

Journal of Electrochemistry

The cathode material MgCo0.4Mn1.6O4 for magnesium ion battery was synthesized by sol-gel method. The TG-DTA and XRD analyses showed that the prepared samples has simple spinel structure. Effect of annealing temperature on electrochemical properties was researched. The result shows that the sample sintered at 700℃ has the best electrochemical properties.

Go to article

Electrochemical Reduction Characteristics Of Nitrobenzene At The Copper Electrode, Jin-Hong Fan, Wen-Ying Xu, Ting-Yao Gao Aug 2005

Electrochemical Reduction Characteristics Of Nitrobenzene At The Copper Electrode, Jin-Hong Fan, Wen-Ying Xu, Ting-Yao Gao

Journal of Electrochemistry

The electrochemical reduction characteristics and transition steps of nitrobenzene aqueous solution at the copper electrode, as well as its reduction mechanism were extensively investigatedby using the techniques such as cyclic voltammetry (CV) and linear scan voltammetry (LSV). The results showed that the reduction peaks of nitrobenzene at the copper electrode were located at 0.58 V and 1.32 V or so (vs. SCE), both acidity and alkalinesolutionsfavoredthe reduction of nitrobenzene. The adsorption of compounds followed by the reduction process, which is controlled by the mass transfer step at higher nitrobenzene concentration. In addition, the higher anaerobic degree led to faster reduction …

Go to article

Adsorption Of Polyaspartic Acid From Sulphur Acid Solution On Carbon Steel And Its Corrosion Inhibition, Rong-Jing Cui, Ning Gu, Chun-Mei Li Aug 2005

Adsorption Of Polyaspartic Acid From Sulphur Acid Solution On Carbon Steel And Its Corrosion Inhibition, Rong-Jing Cui, Ning Gu, Chun-Mei Li

Journal of Electrochemistry

The role of Polyaspartic acid in the corrosion inhibition of 45# carbon steel in sulphuric acid solution has been investigated by polarization curve andelectrochemical impedance spectroscopy (EIS). The influences of the concentration and the temperature of PASP on the corrosion inhibition efficiency were determined. The results indicated that the PASP as the corrosion inhibitor mainly inhibitated the anode; within the experiment temperature, the inhibitor efficiency decreased with the raising of the temperature and PASP had a good inhibiting performance at 10℃, the corrosion inhibition efficiency of PASP for carbon steel increased with the increase of the concentration of PASP when …

Go to article

Research Progresses In A Flow Redox Battery, Quan-Feng Dong, Hua-Min Zhang, Ming-Gang Jin, Ming-Sen Zheng, Ya-Ding Zhan, Shi-Gang Sun, Zu-Geng Lin Aug 2005

Research Progresses In A Flow Redox Battery, Quan-Feng Dong, Hua-Min Zhang, Ming-Gang Jin, Ming-Sen Zheng, Ya-Ding Zhan, Shi-Gang Sun, Zu-Geng Lin

Journal of Electrochemistry

As a large scale electrochemical storage device, flow redox battery in which the active materials are flowing electrolytes is different from the common batteries employing solid or gas materials as an electrode. In this paper we introduced flow redox battery in brief, reviewed its development and actual state on (study). The main problem existed in the new device was discussed when viewed with its future developments.

Go to article

Nafion Emulsion Method For Fuel Cell Membrane-Electrode-Assembly Preparation, Chao-Yang Xia, Lin Zhuang, Jun-Tao Lu Aug 2005

Nafion Emulsion Method For Fuel Cell Membrane-Electrode-Assembly Preparation, Chao-Yang Xia, Lin Zhuang, Jun-Tao Lu

Journal of Electrochemistry

A Nafion emulsion method for fuel cell membrane-electrode-assembly (MEA) preparation was reported for the first time in this paper. 5 %(by mass) Nafion alcohol solution and non-polar solvent (e.g., cyclohexane) were ultrasonicallymixed to produce Nafion emulsion. The catalyst ink prepared using the thus-obtained Nafion emulsion can be directly cast onto Nafion membrane to make MEA. This method is simple in operation, and effectively preventsthe Nafion membrane swelling, hence is suitable for large-scale application. The MEA thus-prepared showed comparable catalyst efficiencywith respect to the popular transfer-method, and the preliminary performance in room-temperature H2/O2 fuel cell test was satisfying.

Go to article

The Research Of Nano-Sized Nio Anode Materials For Lithium Ion Batteries, Jun-Mei Yan, Jing Zhang, Yong Yang Aug 2005

The Research Of Nano-Sized Nio Anode Materials For Lithium Ion Batteries, Jun-Mei Yan, Jing Zhang, Yong Yang

Journal of Electrochemistry

The nano-sized NiO materials were synthesized by solid phase method and sol-gel method. The synthesis conditions were optimized by DSC and TG techniques. The sol-gel method was optimized by changing the solvent and regulating the solution's pH for preparing NiO material. The structure and morphology of the materials were also characterized by means of XRD and TEM techniques, and the electrochemical performances of the materials were studied by the galvanostatically charge and discharge experiments.

Go to article

Adaptive Control Of A Projectile Fin Using Piezoelectric Elastic Beam, Smitha Mani, Sahjendra N. Singh, Surya Kiran Parimi, Woosoon Yim, Mohamed B. Trabia Aug 2005

Adaptive Control Of A Projectile Fin Using Piezoelectric Elastic Beam, Smitha Mani, Sahjendra N. Singh, Surya Kiran Parimi, Woosoon Yim, Mohamed B. Trabia

Mechanical Engineering Faculty Research

No abstract provided.

Go to article

Design Of A Reconfigurable State Transition Algorithm For Fuzzy Automata, Paolo A. Tamayo Aug 2005

Design Of A Reconfigurable State Transition Algorithm For Fuzzy Automata, Paolo A. Tamayo

Masters Theses

An Ontological Controller, a type of supervisory controller used for complex industrial systems, is usually characterized by a large global state set. Monitoring the global state set of these systems is impractical when the desired goal path is chosen since the decision on the next state depends only on a small section of the total state space. The approach is to operate only in a small moving window of the large state transition path. The Hybrid Fuzzy-Boolean Finite State Machine (HFB-FSM) is part of the solution to implement this scheme. The HFB-FSM models the state graph along with plant data …

Go to article

A Three-Dimensional Fdtd Subgridding Method With Separate Spatial And Temporal Subgridding Interfaces, Kai Xiao, David Pommerenke, James L. Drewniak Aug 2005

A Three-Dimensional Fdtd Subgridding Method With Separate Spatial And Temporal Subgridding Interfaces, Kai Xiao, David Pommerenke, James L. Drewniak

Electrical and Computer Engineering Faculty Research & Creative Works

The idea of separating the spatial and temporal subgridding interfaces is introduced in this paper. Based on this idea, the spatial and temporal subgridding algorithms can be developed and analyzed separately. The spatial algorithm was given in the previous paper. In this paper, the temporal subgridding algorithm is described and the stability is illustrated by the analytical formulation of a one-dimensional model. An FDTD code that combines the spatial and temporal subgridding algorithms is implemented. Numerical test models are calculated to show the stability and accuracy of the proposed method.

Go to article

Knowledge Representation, Organization, And Formalization For Simulation Modeling Of Discrete Manufacturing System, Jung Hung Ma Aug 2005

Knowledge Representation, Organization, And Formalization For Simulation Modeling Of Discrete Manufacturing System, Jung Hung Ma

All-Inclusive List of Electronic Theses and Dissertations

Simulation is an useful tool that helps managers making decision by designing models for real systems. It helps companies to study behaviors of real systems hy analyzing computer models and improve the systems based on the experiments' results. However, cross-domain knowledge requirement and lack of tools facilitate modeling are the main reasons that make industries hesitate to use simulation to assist making decision. This research is an attempt to develop robust knowledge representations for discrete manufacturing system and conceptual simulation model. A modeling methodology was proposed to utilize these knowledge representations (KRs) for developing conceptual simulation models from application domain …

Go to article

Toward A More Robust And Accurate Cem Fast Integral Equation Solver For Ic Applications, Weng Cho Chew, Li (Lijun) Jun Jiang, Yun Hui Chu, Gong Li Wang, I. Ting Chiang, Yuancheng Christopher Pan, Jun Sheng Zhao Aug 2005

Toward A More Robust And Accurate Cem Fast Integral Equation Solver For Ic Applications, Weng Cho Chew, Li (Lijun) Jun Jiang, Yun Hui Chu, Gong Li Wang, I. Ting Chiang, Yuancheng Christopher Pan, Jun Sheng Zhao

Electrical and Computer Engineering Faculty Research & Creative Works

We review recent advances in fast algorithms for fast integral equation solvers that are useful for IC applications. We review fast solvers for Laplace's equation, which is about 10 times faster than the conventional fast multipole method. Then we review the physics of low-frequency electromagnetics, and the relevant low-frequency method of moments. We describe a fast solver that allows us to solve over one million unknowns on a workstation recently. In addition, we demonstrate the applications of these fast integral equation solvers to the lithography problem. In addition, we propose a scheme whereby we first characterize blocks of linear circuits …

Go to article

Engineering Of Composite Media For Shields At Microwave Frequencies, Marina Koledintseva, Poorna Chander Ravva, Richard E. Dubroff, James L. Drewniak, Konstantin Rozanov, Bruce Archambeault Aug 2005

Engineering Of Composite Media For Shields At Microwave Frequencies, Marina Koledintseva, Poorna Chander Ravva, Richard E. Dubroff, James L. Drewniak, Konstantin Rozanov, Bruce Archambeault

Electrical and Computer Engineering Faculty Research & Creative Works

Analytical and numerical modeling of composites with an isotropic dielectric base and multiphase conducting inclusions for the development of wideband microwave shields is considered. The model uses Maxwell Garnett formalism for multiphase mixtures. Such composites are required in many engineering applications, including electromagnetic compatibility.

Go to article

The Impact Of Antenna And Rf System Characteristics On Mimo System Capacity, Matthew Leon Morris Jul 2005

The Impact Of Antenna And Rf System Characteristics On Mimo System Capacity, Matthew Leon Morris

Theses and Dissertations

The recent growth in demand for wireless services coupled with the limited spectrum available for these services has spawned new efforts to increase the spectral efficiency of wireless links. Recent research has shown that in multipath propagation environments, the spatial characteristics of the propagation channel can be exploited to increase spectral efficiency through the use of multiple antennas at the transmitting and receiving nodes. Such multiple-input multiple-output (MIMO) systems show promise for dramatic performance gains over their single-antenna counterparts. However, MIMO system performance is influenced by many different factors. Antenna array configuration directly contributes to MIMO system performance. The ability …

Go to article

Efficiently Managing Security Concerns In Component Based System Design, Ammar Masood, Sahra Sedigh, Arif Ghafoor Jul 2005

Efficiently Managing Security Concerns In Component Based System Design, Ammar Masood, Sahra Sedigh, Arif Ghafoor

Electrical and Computer Engineering Faculty Research & Creative Works

Component-based software development (CBSD) offers many advantages like reduced product time to market, reduced complexity and cost etc. Despite these advantages its wide scale utilization in developing security critical systems is currently hampered because of lack, of suitable design techniques to efficiently manage the complete system security concerns in the development process. The use of commercial of the shelf (COTS) components can introduce various security and reliability risks in the system. In this paper we propose a methodology for efficient management of all the system security concerns involved in the design of component based systems. Our methodology is based on …

Go to article

Investigation Of The Superconducting Properties Of Niobium Radio-Frequency Cavities, Gianluigi Ciovati Jul 2005

Investigation Of The Superconducting Properties Of Niobium Radio-Frequency Cavities, Gianluigi Ciovati

Physics Theses & Dissertations

Radio-frequency (rf) superconducting cavities are widely used to increase the energy of a charged particle beam in particle accelerators. The maximum gradients of cavities made of bulk niobium have constantly improved over the last ten years and they are approaching the theoretical limit of the material. Nevertheless, rf tests of niobium cavities are still showing some "anomalous" losses (so-called "Q-drop"), characterized by a marked increase of the surface resistance at high rf fields, in absence of field emission. A low temperature "in-situ" baking under ultra-high vacuum has been successfully applied by several laboratories to reduce those losses and …

Go to article

Power Transmission Control Using Distributed Max-Flow, Bruce M. Mcmillin, Austin Armbruster, Mariesa Crow, Michael R. Gosnell Jul 2005

Power Transmission Control Using Distributed Max-Flow, Bruce M. Mcmillin, Austin Armbruster, Mariesa Crow, Michael R. Gosnell

Computer Science Faculty Research & Creative Works

Existing maximum flow algorithms use one processor for all calculations or one processor per vertex in a graph to calculate the maximum possible flow through a graph's vertices. This is not suitable for practical implementation. We extend the max-flow work of Goldberg and Tarjan to a distributed algorithm to calculate maximum flow where the number of processors is less than the number of vertices in a graph. Our algorithm is applied to maximizing electrical flow within a power network where the power grid is modeled as a graph. Error detection measures are included to detect problems in a simulated power …

Go to article

Mobility-Pattern Based Localization Update Algorithm For Mobile Wireless Sensor Networks, Mohammad Yacoub Al-Laho Jul 2005

Mobility-Pattern Based Localization Update Algorithm For Mobile Wireless Sensor Networks, Mohammad Yacoub Al-Laho

Electrical & Computer Engineering Theses & Dissertations

In mobile wireless sensor networks, sensors move in the monitored area at any direction and speed. Unlike many other networking hosts, sensor nodes do not have global addresses. They are often identified by using a location-based addressing scheme. Therefore, it is important to have the knowledge of the sensor location indicating where the data came from. In this thesis, three localization update algorithms were designed, Specifically, a sensor movement is divided into three states: Pause, Linear, and Random. Each state adopts different localization update algorithm. Since complex movement involves different mobility patterns, a state transition model is developed to …

Go to article

The Case For Thoroughly Testing Complex System Dynamic Models, Wayne Wakeland, Megan Hoarfrost Jul 2005

The Case For Thoroughly Testing Complex System Dynamic Models, Wayne Wakeland, Megan Hoarfrost

Complex Systems Faculty Publications and Presentations

In order to determine whether model testing is as useful as suggested by modeling experts, the full battery of model tests recommended by Forrester, Senge, Sterman, and others was applied retrospectively to a complex previously-published system dynamics model. The time required to carry out each type of test was captured, and the benefits that resulted from applying each test was determined subjectively. The resulting benefit to cost ratios are reported. These ratios suggest that rather than focusing primarily on sensitivity testing, modelers should consider other types of model tests such as extreme condition tests and family member tests. The study …

Go to article

Improved Network Analysis Of Coupled Antenna Diversity Performance, Michael A. Jensen, Matthew L. Morris Jul 2005

Improved Network Analysis Of Coupled Antenna Diversity Performance, Michael A. Jensen, Matthew L. Morris

Faculty Publications

This paper presents a new framework for the analysis of mutually coupled diversity antennas based on network theory. The network model incorporates the matching network between the antennas and front-end amplifiers and uses a realistic model for the amplifier noise. The resulting analysis includes the impact of the coupled-antenna radiation patterns and impedance characteristics in determining the branch signal-to-noise ratios (SNRs). Application of the formulation to coupled dipole antennas characterized using full-wave electromagnetic analysis illustrates that a matching network providing a minimum amplifier noise figure achieves significantly better diversity performance than one providing maximum power transfer.

Go to article

First Prev Next Last